HT3421 How can use this update if I'm using the MAC OS X 10.7.5?

How can I use this updater if I have already upgraded my MAcbook to the MAC OS X 10.7.5.?
To run the update, it requires:
Mac OS X 10.4.11
Mac OS X 10.5.6

Batteries with this information in the Battery Information section need this update:
A device name "ASMB016" or "ASMB013" in the serial number
A Pack Lot Code is 0002
A battery firmware version of 0110 

Similar Messages

  • How can use the ip4 in vietanam..pls advise to me

    Dear whom,
    pls help me,,,
    Now i'm can't use iphone 4 in vietnam......
    i buy the iphone 4 at u.s.a on DEC/2010 and i'm work at vietnam.....
    how can use it in vietnam..
    pls help me....

    jae young wrote:
    thanks..
    You mean is i just can use in us.
    but..some people usally used ip4 in vietnam...(at&t).
    they said to me....just change the sim from at&t sim to local sim(vietnam)..
    pls help me.....
    AGAIN. ALL U.S. iphones are carrier LOCKED to AT&T and CANNOT be activated with any other carrier in any other country.
    You would need an iphone from the official provider in your country, or an unlocked iphone ( which is not sold at all in the U.S.)

  • How to use the MAC Keyboard

    Can anyone point me to a tutorial or posting which explains how to use the keyboard?
    I have an iMac (sep2009) with a wired keyboard including numeric keypad and there are keys that I just do not know how to use
    eg:
    How do I put FUNC LOCK on so that when I using Excel the F2 key becomes EDIT CELL rather than adjusting the brightness
    What do the keys below the F14 and F15 keys do? There is an angled arrow up and left and ne down and right. and there is an arrow up with two lines crossing it a,d another similar one down. What are we supposed to sue these for?
    Under the F16 key there is a box with a cross through it. What does that do?
    WHy are F5 and F6 blank?
    What does the big key on the very right bottom do?
    I would have thought that there would be a MAC101 guide to the keyboard but I cannot find it... Any help from out here?
    Many thanks

    jhrichmond wrote:
    Can anyone point me to a tutorial or posting which explains how to use the keyboard?
    I have an iMac (sep2009) with a wired keyboard including numeric keypad and there are keys that I just do not know how to use
    eg:
    How do I put FUNC LOCK on so that when I using Excel the F2 key becomes EDIT CELL rather than adjusting the brightness
    System Preferences>Keyboard; Set it to use Function keys as F1, F2, etc.
    What do the keys below the F14 and F15 keys do? There is an angled arrow up and left and ne down and right. and there is an arrow up with two lines crossing it a,d another similar one down. What are we supposed to sue these for?
    I just loaded the UK Apple store and compared the keyboards to the ones at the US store. I guess since you are so "international" over there, you get pictures instead of words. My guess would be Home, End, Page Up and Page Down
    Under the F16 key there is a box with a cross through it. What does that do?
    Clear key for the numeric keypad.
    WHy are F5 and F6 blank?
    No additional functions assigned to them.
    What does the big key on the very right bottom do?
    Enter key for the numeric keypad.
    I would have thought that there would be a MAC101 guide to the keyboard but I cannot find it... Any help from out here?
    I think Apple thinks based on where you live, you understand pictures instead of words. Probably cheaper to make one keyboard than ones for each language.
    Many thanks
    Edit: Almost forgot. MAC is an acronym for Media Access Control. A Mac (short for Macintosh) is a personal computer made by Apple.
    Message was edited by: Barney-15E

  • How can use the active x excel to change the assigned data/number in my VI?

    I have an assigned data in my vi using build array and insert into array. i can change the data in excel,
    but i can't change the data in array, How can I connect/communicate/control the data in aray using active x excel.
    (i know this is complicated that's why i'm trying to get helped)
    (please lend me a simple example)
    Thank You very much.

    The one I pointed you to before was a bad example. Try the one here. The example returns the cell value as a string but that's easy enough to change. You can also modify it to return a range of cells to create a LabVIEW array. You can also search NI Dev Zone for other examples by going here and you can also search this forum for Excel examples.

  • How can use the select statement  to retriev the data from  a where conditi

    Hi,
    SELECT KUNNR
               NAME1
               STRAS
               ORT01
               PSTLZ
               LAND1
         FROM  KNA1
         INTO TABLE IT_KNA1
         FOR ALL ENTRIES IN IT_LIKP
         WHERE KUNNR = IT_LIKP-KUNNR AND
               KUNNR = IT_LIKP-KUNAG.
    Here I am getting records only when WHERE KUNNR = IT_LIKP-KUNNR AND
                                            KUNNR = IT_LIKP-KUNAG.
    But I need the records for both when KUNNR = IT_LIKP-KUNNR
                                 And     KUNNR = IT_LIKP-KUNAG.
    Can you suggest me the best logic.
    Thanks.
    Kumar .

    Hi Suresh,
    Use the following code.
    Loop at it_likp.
    if it_likp-kunnr <> ' '.
    select name1 stras ort01 pstlz land1 into corresponing field of table it_kna1
             from kna1
             where kunnr = IT_LIKP-KUNNR.
    elseif it_likp-kunag <> ' '.
    select name1 stras ort01 pstlz land1 into corresponing field of table it_kna1
             from kna1
             where kunnr = IT_LIKP-KUNAG.
    elseif it_likp-kunnr <> ' ' and it_likp-kunag <> ' '.
    select name1 stras ort01 pstlz land1 into corresponing field of table it_kna1
             from kna1
             where kunnr = IT_LIKP-KUNNR
             AND   KUNAR = IT_LIKP-KUNAG.
    endif.
    endloop.
    hOPE THIS WILL WORK FINE.
    Rewards pts if it is usefull.
    Regards
    Srimanta

  • TS3308 How can use the printer with iPad

    How can you use the printer ( that is connected wirelessly to the same network ) with iPad

    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
     Cheers, Tom

  • How can one search for a filename anywhere on the Mac?

    How can one search for a filename anywhere or everywhere on the Mac?

    You can configure Spotlight so it will also search in system files or you can download and use EasyFind 4.9.3 that doesn't require special configuration.
    Get Spotlight to search system files (and more)
    Enter the search term in the Finder window's search field.
    Click the [+] button in the search bar to add a search option.
    In the first drop down menu choose Other.
    Choose “System Files” from the list that pops up (and check the box to place in drop down menu to avoid this step later,) click on the OK button.
    Now back in the Finder choose Include from the second drop down menu.

  • Can use the Mac App Store behind a HTTP/1.1 proxy

    We have an HTTP/1.1 proxy at work, and when doing a download from the Mac Apps Store, the downloaded data comes through as "Transfer-Encoding: chunked".
    According to the HTTP 1.1 specification (the request is made as HTTP/1.1), the client MUST be able to decode the chunked transfer encoding (see the end of section 3.6.1 in rfc2616).
    Am I missing something? Or is there a way to make the Mac App Store use HTTP/1.0, or support the standard?
    Thanks.

    No. Only apps bought through the MAS can be updated by the MAS.

  • Anyone know how to use the mac pro to photoshop

    Is there a software where i can use it to put my face on someone else body or vice versa on a pic? If so can i just choose any pic online to do it? Thanks alot

    http://cgit.freedesktop.org/ModemManager/ModemManager/tree/uml290.txt

  • How can I redeem an OS X code from the Mac App Store without a Mac?

    I had to erase my mac and I purchased a new license of OS X Lion for it, but need to redeem it at the App store before I can install it on the Mac. Any direction would be helpful.
    Thank You.

    You can't. The Mac App Store app is required to download OS X Lion. Without a Mac, you can't have the app.

  • How can I run my Canon LPB6000-B in the Mac OS X 10.7.2 ?

    I downloaded the Canon LPB6000 driver from the link below and installed it using the included documentation. in the "adding the Printer to the Printer List" step, there should be a "More Printer" button in the "Printer and Fax" in "System Prefrences" to add the printer name and driver and consequently complete the installation but actualy there isn't any "More Printer" button. Please help me out...!
    http://software.canon-europe.com/software/0040250.asp

    According to the site:
    Printer Driver Ver.3.30 for Mac OS X 10.4/10.5/10.6
    Supported OS:
    Power PC: Mac OS X v10.4.9 to v10.5.8
    Intel: Mac OS X v10.4.9 to v10.6.5
    The drivers do not support Lion v10.7

  • Just bought a used mac. how can i move files from my pc to the mac?

    How do I migrate my pc files to my mac?

    In addition to following Kappy's advice,  this link can help you also. http://www.apple.com/support/switch101/

  • How can use the icons from keyboard?

    I want the little characters on my keyboard how go by getting this?

    Settings> general> keyboard> keyboards> add new key board> select emoji.

  • I received an error message ipod is disable,connect to itune how can fix this problem  ipod would unlock

    I received an error message ipod is disable,please connect to itune, how can fix this problem, ipod would unlock.

    As the mmessae says, connect the iPod to its syncing computer and restore via iTunes. If iTunes asks for the passcode and you can't enter the passcode or you do not have the syncing comuter, place the iPod in recovery mod and then restore.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    For more info see:
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • I bought pages ages ago using an iTunes account that no longer works as the email address has been closed down. How can I now update my Pages app, if it asks me to sign in using this now defunct email address?

    I bought Pages ages ago using an iTunes account that no longer works as the email address has been closed down. How can I now update my Pages app, if it asks me to sign in using this now defunct email address?

    All apps are always tied to the account from whaich they were purchased and will always have to be updated using that account.
    Just because the e-mail account is shut down, has nothing to do with the itunes account. Why did you create a new account?  Why not just change the e-mail associated with the old account?

Maybe you are looking for