HT3458 My Ipod is not getting detected on my Laptop

I am currently owning an Ipod Shuffle 3rd gen. Recently my Ipod stopped charging. When tried charging the same, the computer is not detecting the Ipod. Please suggest the solution

Are you using the USB cable that came with the shuffle?
If you are using a connection on a USB hub, try a direct connection to a USB port on computer.

Similar Messages

Ipod Touch not getting detected after IOS upgrade.

I have recently upgraded the firmware of my Ipod Touch (1G) to IOS 3.0.1 and was successful in upgrading.
The issue i am facing is that my ipod touch is not getting detected after reconnecting and the ipod touch is not getting switched on...it is just showing the apple symbol and the progress bar.
Please let me know if anyone has faced similar type of issue.
Please also let me know the resolution for this.

Are you using a USB hub? Try connecting the iphone directly to the computer's USB port and see if that makes a difference.
Also, with the upgrade, this seems to happen a lot. Most of the time if it is not the USB issue above, it can be resolved by simply redownloading Itunes and installing it on top of your current installation.

Ipod not getting detected in Windows

I have this iPod shuffle(512 MB) which plays songs perfectly but there is this problem since past few days that its not getting detected at any of the computers. I have downloaded the latest updater n tried installing that also but of no use. I had purchased it from US and now i'm in India.
Please tell me what to do ?
You can contact me on [email protected]

the shuffle will only actually work with one itunes library, so what do you mean by "any of the computers". if you haven't already, pick the computer you want to use, ensure that itunes 4.9 and the latest updater s/w is installed, then conect your shuffle, and under explorer reformat the shuffle. then disconnect and re-connect the shuffle, and reload the updater s/w. this will remove all the tunes from your shuffle, but should work ok

My ipod shuffle is not getting detected , anyone please help

hi,
I bought an Ipod shuffle last March , its only 5 months old and is not working , its not getting detected at all in any of the PC's
i went took it to service center in Bangalore ,service center guy is saying that it now useless , and saying that you can replace this but you need to pay 2500 for it.
i regret for getting an apple product.
Regards,
Karthik.

Before you trash it - did you try a different usb cable?

My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

iPhone, iPad, or iPod touch not appearing in iTunes

HT1369 iphone4 is not getting detect in my itunes after installing itunes 10.7.0.21

iphone4 is not getting detect in my itunes on Windows vista (OS) after installing/upgrading to itunes 10.7.0.21

Device not detected in iTunes

Why my ipod is not being detected in my ml350

why my ipod is not being detected in my mercedes ml350

Does mercedes say it is compatiblw with your model iPod and its iOS?

My I phone is not getting detected on my PC...

My Iphone is not getting detected on my PC, though it is being recognized by Itunes. Also how can i download the pictures from my phone since it is not being detected by my PC. Its an Acer laptop running on windows 7. Can anybody help???

Check and make sure u have itunes on you PC and then double check that your stuff is plugged in

External HDD not getting detected?

My 250GB Transcend External HDD is not getting detected. Help please. Even yesterday, I had used it successfully. I don't have a clue what happened.
Last edited by armageddon09 (2009-10-14 12:49:39)

I have the sam issu with a Coolink USB2.0 external enclosure with a 320GB Hitachi HD.
The relevant informations are:
# uname -a
Linux arch.aneder.hu 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64 AMD Turion(tm) 64 X2 Mobile Technology TL-60 AuthenticAMD GNU/Linux
# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b028 Chicony Electronics Co., Ltd VGA UVC Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
after ca. 5 second:
# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b028 Chicony Electronics Co., Ltd VGA UVC Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
usb 2-3: new high speed USB device using ehci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 6:0:0:0: Direct-Access Hitachi HTS541616J9SA00 PQ: 0 ANSI: 2 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 34 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb-storage: device scan complete
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI disk
usb 2-3: reset high speed USB device using ehci_hcd and address 2
usb 2-3: device descriptor read/64, error -71
usb 2-3: device descriptor read/64, error -71
usb 2-3: reset high speed USB device using ehci_hcd and address 2
usb 2-3: device descriptor read/64, error -71
usb 2-3: device descriptor read/64, error -71
usb 2-3: reset high speed USB device using ehci_hcd and address 2
usb 2-3: device not accepting address 2, error -71
usb 2-3: reset high speed USB device using ehci_hcd and address 2
usb 2-3: device not accepting address 2, error -71
sd 6:0:0:0: Device offlined - not ready after error recovery
usb 2-3: USB disconnect, address 2
It wasn't any problem with 2.26.29-ARCH kernel.
Any hints?
TIA

Iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!

Isight not getting detected

I have a standalone isight and I use an IMAC G5.Its funny that my isight is not getting detected by my imac at all!! I have tried changing the firewire ports, but I just dont understand!! I hadnt been using for about a couple of months, I come back and try videochatting and it just doesnt work!!It says isight not connected!!
Can you suggest, what I need to do. I dont think I have the CD for isight either. I have had this isight for about 2 years now!

I had the same problem with my macBook. All of a sudden the green lites on my built in camera were not on and it did not recognize my isight camera...Couldn't get it to work till I plugged in an external isight camera....started working for a few weeks....then quite working again and read about reseting the prm on an intel based macbook....shut down everything, disconnected all power THEN pushed the power button for 5 seconds....repowered the computer and is came back on working.
Only problem, and the mac dealer told me this didn't matter but I'm not sure...I only get one green lite instead of two...
any thoughts on this...
Rick

Earphones not getting detected

Hi,
I'm using nokia 6233. My ear phones are not getting detected. When i checked the enhancement settings the headset and also data cable options are not present.
Can some one please tell me what exactly can be the problem?

if this only started occurring recently, which i presume what is happening here, then it may be due to a firmware problem. my advice would be to check if there is a newer firmware version available on NSU for your phone. if there is, upgrade to this, then restore factory settings after having performing the upgrade. if no upgrade available, then try restoring the phone to factory settings to see if this rectifies the problem. if this doesn't, then try using NSU to re-install the firmware version you are currently using.
remember to backup all of your data before performing any of the above. let us know how it goes.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

SQL server instance not getting detected during SCOM 2012 R2 Installation

Hi All,
This is related to the below thread which i created. But i wanted to test this practically in a LAB equipment
https://social.technet.microsoft.com/Forums/en-US/96feece7-c168-4f42-b62e-4c0c20f8d525/does-scom-2012-2012-r2-setup-detect-a-sql-instance-of-a-sql-server-in-the-same-network-which-is-in?forum=operationsmanagerdeployment
So i want to install SCOM in my domain, But i want to use a SQL server in my network which is in another domain.
So i have 4 server machines as below:
SERVER_DC1 - Domain controller of 1st domain.
SERVER_DC2 - Domain controller of 2nd domain.
SERVER_SQL - SQL server 2012 Enterprise installed for SCOM but is in Domain 1
Server_SCOM - I want to install SCOM in this but which is in domain 2
I created a trust relation between 2 domains with a Forest trust 2 way transitive.
I have created a security group and added that as SQL Admin during the installation. Later i added one Domain administrator account from Domain 2 to this security group.
When i do a installation in SERVER_DC1 for testing the SQL instance is being detected as below.
When i do the installation in Server_SCOM which is in another domain then the instance is not getting detected.
I have turned off windows firewall in all the machines.
Before creating the trust i ran the setup in Server_SCOM then it was giving me a warning saying it is not able to access the SQL server due to permission issues.
After giving permissions my instance is not at all getting detected.
Can any one help plz.
Gautam.75801

Hi Yan Li,
Really a helpful post. I tested the connection. I connected to the SQL server in Domain A using a server in domain B logged in as a domain B user to whom the SQL permissions are provided. The result says It was successful.
Below is the screenshot.
I don't understand why is it not getting detected in the SCOM setup.
But 1 more important thing which i forgot to mention.
When i log on to the server in which i want to install SCOM in domain B, But by using Domain A's user account (Added as a local user in SCOM server in domain B), Then the Instance is getting detected.
Below is a screenshot of that.
So has any one faced such a type of issue ?
Gautam.75801

I have an iphone 4 with 4.3.2 version, want to upgrade but my phone is not getting detected on my comp on itunes. i want to upgrade it to the latest version of the software, please help

i have an iphone 4 with 4.3.2 version, want to upgrade but my phone is not getting detected on my comp on itunes. i want to upgrade it to the latest version of the software, please help

If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone

HT4623 i have iphone 4 with 4.3.2 version, i want to upgrade the software. but my phone is not getting synchronised on itunes and not getting detected. please help me

i have an iphone 4 with 4.3.2 version, i want to upgrade the software. but my phone is not getting synchronised on itunes and not getting detected. also there is no update software tab under settings.please help me

If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone

HT3458 My Ipod is not getting detected on my Laptop

Similar Messages

Maybe you are looking for