HT3500 cant print wirelessly!!!!!! help!!!!!!!

I have recently purchased a mac book pro and i have a HP Deskjet 3070A printer that is an air printer. I have just installed a BT home hub 3. the problem i am having is i cannot print wirelessly.
My mac says the printer is not connected but the printer is connected to the hub and the computer is connected to the hub.
Even my i-pad wont print any more where it did before.
PLEASE HELP!!!!!

AirPrint is unrelated to your Mac, but your router is an integral component of AirPrint communication. The problem is likely a result of changing your router.
This BTCare Community Forums thread suggests reconfiguring your router to use WPA and not WPA2:
http://community.bt.com/t5/Other-BB-Queries/HomeHub-3-Apple-Bonjour-not-working- for-AirPlay-AirPrint/td-p/230033

Similar Messages

I use pc windows 7 i downloaded new version fire fox i cant print wirelessly to my hp printer it is set as default when i chouse it from drop down it wont let me and it stays on the konica

i use PC windows 7 i downloaded new version fire fox i cant print wireless to my hp printer it is set as default when i chose it from drop down it wont let me and it stays on the konica after down load new fire fox and chose disable option not compatible

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Cant print wirelessly after getting new router

Hi,
I cant connect wirelessly. After I uninstalled then reinstalled using the hp set up assistant I downloaded from this site, I get asked ito check a box f I want to connect wirelessly.
I check the box. It asks me to connect via USB. I am connected via USB. I disconnect then reconnect. It asks me to enter my wireless network name. I do that but it says the device isnt connected and that I should connect via USB. I disconnect the USB and connect it to another USB port and it still doesnt work.
I shut down the computer, disconnect the printer, and reset the router. I turn on the computer then reconnect the printer and launch again the set up assistant. It still cant discover the WiFi. I go to my system preferences and open up Print & Fax. I see the printer there. I delete it. When I add again finally I see a place to enter an ip address. I add that and now I see a generic printer with the ip address. I still cant connect.
I go back and re add the HP 6000 printer option that it says to add. I uninstall the hp software, I shut down my computer, disconnect the printer. I turn off the router, disconnect it, reset it. I wait for the router to turn back on, then turn on the computer, turn on the printer, reinstall the software. It still says the device isnt connected.
I check to see if its listed in Print & Fax and it is. The set up assistant wont let me continue. I
just discovered that I can manually connect to my network device by typing in my ip address under the gear icon in the set up assistant. I input my routers ip address and every ip address listed in my network but it still cant connect. Im out of ideas!!!
Thanks

Hey @HP-Mac-Lisa,
Because your printer is unresponsive now to our steps I would recommend reaching out to our Technical Support queue by phone to explore additional options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
It's been a pleasure working with you. I wish you luck going forward with this!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

I cant print wireless from my D110a ..It says its connected to wireless network.

I am unable to print wireless from my laptop to my D110 printer. The printer shows up, but wont print. the printer also shows that it is connected to wifi.

Can you describe the new home network?
What router brand?
What Modem?
What service provider?
10.59.1.250 is a valid home network address. You might check the address on the computer to make sure it is simular (10.59.1.xxx).
This sounds like it could be a router setup issue. Sometimes service providers set up router in a way that prevents the computers printer driver from seeing the printer. This might not match with the "It worked for 2 weeks" though.
Another possibility is that the printer got a new IP address and the computer hasn't been able to find it. Rebooting the cpmputer might fix that.
Still another possibility is that the printer is attached to some elses router. You might want to comfirm is it connected to your network and not another one in the area. If you used the default SSID on the new home network there might be another one in the neighborhood that is the same.
Treefrog
P.S. Be sure the old network equipment is not plugged in somewhere, unless you have changed its SSID.
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

I am struggling to connect my macbook pro to a wireless network. Works fine with USB and my Toshiba can print wirelessly but not the MAC. Any ideas?

Hi
I cant print wirelessly on my Mac pro but can via usb. the Toshiba does work wirelessly..any ideas?

If you can use the wireless network properly (surf the web, check email, etc.) then there is probably nothing wrong with your network settings.
When you print from your Mac Pro, does the printer show up in the Printer list at all (in the Print dialog box)?
If not, have you already tried to Add Printer from the bottom of the Printer list?
If you click Add Printer and it can't see the printer, the next thing to do is probably go to the Toshiba printer web site and see if there is a Mac printer driver to download and install so that it shows up in the Printer list.

Netgear DGND3300 Router and HP C4780 cant get set up to print wireless

Ok I've read just about every networking post and cant solve my issue.
History: I recently upgraded from a 2Wire DSL router/modem to the new Netgear dual band 3300.
After I made the change, I went through all the reinstalls and network configurations and all worked great.
Then one day while working from home the printer stopped printing wireless for both the Apple Laptop and my Lenovo laptop.
So I uninstall all the HP software from my Lenovo and reinstall, go through all the steps plugging in the USB cable from the printer. I locate the correct SSID and enter the WEP on the HP printer install.
This is where I lose it, in the printer set up a this point it tells me the SSID on the printer and the machine have different SSID. I know they are both on the same network as I confirm on my wireless setting on the Lenovo and when going through step by step on the printer install.
I read where you can log into the printer with the IP address to edit settings. so I print the HP Network configuration page, it gives me the IP address. when I try to log onto the IP it does not take me to the printer....it goes to some google page.
I'm no tech but this isnt my first rodeo. Any help would be greatly apprecaited, this is day 3 on my own. Need the big guns.
thank you

OK, here are a few ideas:
1. Don't use WEP. It is not secure and can cause connectivity problems. Use WPA or WPA2
2. Make sure that 802.11g is available. 802.11n and others can also be available, but g must be present.
3. Broadcast your SSID and do not use MAC filtering.
4. Make sure the firmware in your router is up to date.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My printer is connected to airport by usb but i cant print from my iphone wirelessly even though my iphone is connected to the network..my macbook pro prints wirelessy

help
cant print from iphone but can print from macbook pro wirelessly thru airport extreme
why cant i print off the iphone

The iPhone cannot print to a device that is connected to the USB port of an AirPort router unless you install an App like Printopia.
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
I like this App because it works for me and there is also a free trial, so that you will know if it will work for you before you buy.

I just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!

i just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!

Is the status light green?
Your Airport device may be in Bridge Mode.
Airport Utility 6:
Open Airport Utility, select the Airport Express and click Edit. Navigate to the Network tab and change Router Mode to DHCP and NAT. Then click Update on the bottom right.
Airport Utility 5:
Open Airport Utility and click Manual Setup. Navigate to the Internet icon and change Connection Sharing to Share a Public IP Address. Then click Update on the bottom right.

HT4356 I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

Have you tried restarting the printer? Reboot the iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Can someone help me print wirelessly?

Toshiba laptop running vista 64-bit connected through DLink wireless router.
HP Officejet Pro L7780 All-in-One connected through DLink wireless router.
I can print fine using a wired connection but I want to set it up so I can print wirelessly. When I ran the installation wizard there was a problem in that the IP Addresses of the printer and laptop were not the same. I do not know how to fix this problem (if that even is the problem). Can someone point me in the right direction. I have no patience with crap like this.....**bleep** HP and Toshiba need to make this more seamless.
I don't know how to check, change, etc. the ip address on the laptop. I do know how to check and change it on the printer. However, when I am about to change it on the printer it tells me it will no longer be connected to the wireless network. **bleep** am I supposed to do then? Ridiculous.....
Thanks for any advice you can offer.

OK, let's reset the printer. From the control panel of the printer: Setup > Network > Reset Network Defaults.
Now, from the same Network menu run the Wireless Setup Wizard. Make sure to choose your network, not a neighbor's.
Once the printer is connected to your wireless network, make sure that you are connected to your network on your PC (again, not a neighbor's). Run the HP software on your PC. It should find the printer and connect.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I cant connect to my printer wirelessly

Hello,
I cant connect to my printer wirelessly, it doesn't show up on my devices list my printer is a hp 5520e and my laptop is a hp g61, thanks.

Hi,
Please download and run the following software:
http://ftp.hp.com/pub/softlib/software12/COL42577/mp-108807-2/PS5520_1315.exe
Still does not work, download and run the following tool:
http://ftp.hp.com/pub/softlib/software12/COL50849/mp-129932-1/HPPSdr.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT1338 I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. can anyone help. I have been able to print on this printer for

I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.

"/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
(with thanks to Yuengdog1983):
This issue may be a result of the Computer Name being left empty:
Open System Preferences and choose Sharing.
Enter a name for your computer.
Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print!

HELP! Printing wirelessly!

Help! I have a mac book and i have the HP Photosmart Printer that should print wirlessly with my macbook. I don't know how to get it to do that though! I have an airport express. I connected the printer to the airport express, is that what I should be doing?? Still I get no option or any idea how to print wirlessly. helpp thanks!

Yes you should hook the printer to the Airport Express via the USB. Then on the MacBook go to Applications->Utilities->Airport Setup Assistant and open it up. Choose to setup a new system and it should see the AE. If it doesn't you may need to reset the AE. Do so by unplugging the USB and unplug it from the wall. There's a little button you need a paper clip or pen to depress and hold it in and plug it back in while still depressing the button. Wait until it flashes green 4 times. Then you can release the button and plug the USB back in.
Go back the the Setup Assistant and it should see a new access point. Choose it and configure it to print wirelessly. The AE should restart and you should be good to go.
Then try and print something. If you don't see the printer choose BonJour and that should find your printer.
See if that gets you along. If not post back.

Hello, i ordered 2 32GB white iphone 4s online as a guest user. The mobiles has been delivered, but i cant print the invoice for that. They ask me to login with the apple ID. But as i mentioned i logged in as guest so there's no AppleID associated. HELP !

Hello, i ordered 2 32GB white iphone 4s online as a guest user. The mobiles has been delivered, but i cant print the invoice for that. They ask me to login with the apple ID. But as i mentioned i logged in as guest so there's no AppleID associated. HELP !

Contact Apple customer support via the "Contact Us" link at the bottom, they may be able to assist you.

Help getting Canon PIXMA MG2520 Printer to Print Wirelessly

I just got my Canon PIXMA MG2520 printer set up. Everything worked perfectly. I downloaded the drive and plugged it in and it worked. However, I cannot get it to print wirelessly. With my last printer there was a simple step to get the printer to do this. Something I checked or unchecked, but I can't remember what that was. Can someone help please? Thanks.

Do you have your printer setup in its setup panel to connect to your WiFi network?
When you say you plugged it in and it worked, are you saying you used a USB cable to try it?
If the printer is setup to connect to your WiFi network, you may only need to power off your router, wait a few seconds and power it back on for your printer to be seen on the network.

HT3500 cant print wirelessly!!!!!! help!!!!!!!

Similar Messages

Maybe you are looking for