HT3500 How to connect printer to airport

I wanted to connect my hp printer directly to airport , is that possible

See: http://www1.lexmark.com/en_US/software/lexprint/index.shtml

Similar Messages

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

How to connect printer wireless i dont have wirelee router? my printer is deskjet 4625

i m unable to connect my printer wireless and generate code for registering at eprint.how to connect printer wireless i dont have wirelee router? my printer is deskjet 4625. please suggest ? i have installed printer on my computer and laptop. computer is having w-7 os and laptop is having w-vista.
thanks
p.h.thakur

That is not correct sabretooth04,
The Deskjet Ink Advantage 4625 only support USB or Wi-Fi, it does not provide any Ethernet connectivity and therefore a Wireless router is essential for the web services to work.
The specifications can be found in here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149922&tmp_task=prodinfoCategory&cc=us&dlc=en...
ichleiben57 - As your printer only support wireless connection you will either need a wireless router, bridging your wired ADSL router with a wireless access point or replacing the printer to a different model which support wired ethernet connection.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

With HP6500A Windows Visa Cable hookup, how to connect printer to network

With HP6500A all in one Windows Visa cable hookup, how to connect printer to network

Welcome to the forums @TonyWE
I understand you are looking to connect your Windows Vista computer, to your network. Below is the guide for you to follow to connect the printer wireless or wired to your network.
I hope this helps
Setting Up the Printer Software for a Wired or Wireless Network for the HP Officejet 6500A e-All-in-...
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to connect printer, win laptop, & anroid phone through router

Without knowing the specifics.
Cloud Print.
http://www.google.com/cloudprint/learn/

How to connect printer, win laptop, & android phone through router
This topic first appeared in the Spiceworks Community

How to connect printer epson l210 to airport express

How to connect and setup printer epson l210 to airport express

Hey Love iapd,
Thanks for the question, and welcome to Apple Support Communities.
The following article will outline how to set up a printer that may be connected to an AirPort Express.
OS X Mountain Lion: Set up a printer connected to a Time Capsule or AirPort base station
http://support.apple.com/kb/PH10875
Additional information:
USB printer troubleshooting for AirPort Express, AirPort Extreme, and AirPort Time Capsule
http://support.apple.com/kb/TS1253
Thanks,
Matt M.

How to connect to specific Airport

I have a new Airport Extreme-N which is hardwired to the internet. In another room I have an Express that I use to connect to my DVR to get "on demand" programming.
I am using the Extend this network option on the Express.
I am noticing that the iMac will often connect to the Express (which then connects ot the Extreme then to the internet) instead of connecting directly to the Extreme.
Is there a way to force the iMac to connect directly to the Extreme.
I'm getting some odd wireless issues (wireless stops working, have to cycle the iMac airport on and off to reconnect) and am wondering if this might be an cuse.

Oops! My fault.
There is an option in the AirPort Utility to not allow wireless clients connect to the AirPort, except for the base station (the express would connect to the extreme but the express won't let any other device connect to it while the extreme would let you connect to it). However if you're using the express to extend the range, this won't work (but if you're using the express just to use printer sharing and AirTunes, try this).
To do this:
1. Open the AirPort Utility (which is found in the Utilities folder which is in the Applications folder).
2. Select your AirPort express and click on Manual Setup.
3. Under the Wireless tab, uncheck Allow Wireless Clients.
4. Click on Update.
Then check and see if your computer connects to the extreme.

How to connect printer to virtual computer

How to connect a hp830 printer to a VC running WXP? The same printer works fine on a physical PC, but when I follow directions in the install wizard to "add new printer" within the VC, it comes back "driver not installed" and fails.

The only way to print from a remote source is to save the files locally and print them from there. There are some commercial class printers that will support remote printing, but I don't know the exact models. An alternative way of doing this would be to get a printer that supports ePrint. With ePrint you can print from any source that can send an email, from anywhere in the world. All you have to do is make sure the printer is on and has an active internet connection. Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to connect to dsl airport extreme with built in modem

Hello everybody,
while we were tiding our cellar, i found an old airport extreme (a1034) with a built in modem, but i aint able to connect to my isp.
I looked throug the manual, but i didnt got answers there (maybe because of my poor english) . Is there a tutorial out there which tells me
how to connect to my isp?
Regards Floh
PS: again sorry for my poor english

If you try to set up the new AirPort Extreme with AirPort Utility 5.6.1, you will receive a notice that you need a more up to date version of AirPort Utility.
Nevertheless, AP 5.6.1 will allow you to set up the basics....wireless network name, password, etc.
It will appear that you can change other settings that are not found in more recent versions of AirPort Utility, but if you go in and check using a newer version of AirPort Utility, you will find that the settings that you thought you had made have not "stuck".
For example, you want to change the Radio Mode on the new Extreme and not use the Automatic setting. AP 5.6.1 will appear to let you do this. But, if you check the setting using a more recent version of AirPort Utility you will see that the setting is still set at "Automatic".
So, the bottom line here is that unless the newer version of AirPort Utility has the specific setting that you want to change, you will not be able to make that change.
Is there ANY chance, to set up my new "towers" with more
options, than the current Airport Utilities do offer?
Unfortunately, no.

How to connect printer to wireless connection

Hpdeskjet3050a all in one printer J611g How do you connect the printer to a wifi signal?

Hi,
Please read the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02722113&cc=us&dlc=en&lc=en&product=5061082&tmp...
If you already installed the software, you may find the wireless configuration as follows:
Click Start, select All Programs, select HP,
Select Your printer name,
Select Printer Setup and Software Selection,
Select eighter Convert a USB connected printer to wireless or Connect a new printer and Follow the onscreen instructions.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to connect Xbox to Airport Express

I currently have the Xbox connect to the Airport Express (ethernet).
The cable modem is connect to the Airport Extreme in another room.
The internet is WPA protect.
The Airport Extreme is password protected.
Is this a possible set up? Also, can you provide directions of how to enter all the correct setting information on the Xbox? Do I need to enter anything on the Airport?

Looks like this thread died. I have a similar situation. Got a Time Capsule connected to a modem, and an older airport express in another room I've been using to stream music. The wireless network is WPA password protected. My son just got an Xbox 360. Just fooling around, I connected it to the airport express, but wasn't able to see the network. I have the airport express set to "join network." Do I have to set up a WDS? If so, do I have to change settings on the Time Capsule (to main base in a WDS)? I'd rather not set up a WDS, as I'd rather not mess with the Time Capsule, and I've heard that WDS cuts down on the signal strength of the wireless network. Any advice is appreciated. Thanks in advance.

Connecting printer to Airport extreme via Ethernet

I have just setup a wireless home network using Airport extreme. My desktop windows xp pc does not have a wireless connection and is connected to the internet by ethernet directly pluged in to the DSL modem.
My Canon printer is connected to the Airport's USB port.
Is there a way I can connect the desktop pc to the printer via the Airport's Ethernet connection?
I appreciate any help, herb

Welcome to the discussions forum Herb.
I have just setup a wireless home network using Airport extreme.
From what you described, you're not done yet.
As I understand it, you're using your MacBook Pro to print to the Canon wirelessly through the Airport Extreme, but your Windows computer can't do that since it has no wireless card. Furthermore, you can't use your MacBook Pro to get on the internet when your DSL modem is connected directly to your PC. Is that right?
The right way to do things is to connect the DSL modem to the *Airport Extreme*, not a computer. Since your PC isn't wireless, its Ethernet port ought to be connected to the Airport's LAN port, and not directly to the DSL modem.
To reconfigure your equipment the right way, do the following:
1. Power down your Windows computer.
2. Unplug the DSL modem.
3. Unplug the Airport Extreme.
4. Power down all your other equipment too, for good measure.
5. Unplug the Windows computer from the DSL modem, and connect it to a LAN port on the Airport Extreme.
6. Using another Ethernet cable, connect the Airport Extreme's WAN port to the DSL modem.
7. Plug in the DSL modem. Wait a few moments for it to complete its power up sequence. Some take longer than others.
8. Plug in the Airport Extreme. After a few moments, its LED should glow steady green, meaning it's communicating with the DSL modem.
If the light blinks amber and never turns green, that means you'll have to reconfigure the Airport using Airport Utility. Not a problem, but if that happens you ought to write back for more help.
9. Boot your computers and the printer. The order isn't important.
Now, check to make sure you can communicate with everything the way you have been used to doing:
1. Log in to your Windows computer and make sure you can load a web page.
2. Log in to your MacBook and make sure you can still print to the Canon.
3. Make sure you can load a web page with your MacBook Pro.
4. Finally, you ought to be able to print with your PC as you're accustomed to. If you can't, you will need to "add a printer" in Windows so it can find the Canon again.
Good luck.

How to connect a 2nd airport express in a home network?

I'm triying to connect a second airport express in my home network but when I plug in and go to Airpot Utility says :
"This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information."
I don't know what to do to get connect the second airport exprees?, Do I miss something ?

You need AirPort Utility 5.6 to configure that model Express. The problem with that version is that Mountain Lion will refuse to let you install it.
This dilemma is easily solved. You simply need to extract the app from the installer package using a package extractor like Pacifist or unpkg. Pacifist is shareware, unpkg is free.
Download Pacifist here: http://www.charlessoft.com/
Download unpkg here: http://www.timdoug.com/unpkg/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
Open Pacifist and from its File menu, navigate to the package and open it.
Click the "reveal triangles" until you see AirPort Utility 5.6.app:
Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
If you have an older computer with a version of AirPort Utility earlier than 6.0, you can administer it that way as well.

Cannot find instructions on how to connect printer to a new wireless network.

HP 4500 series was connected to my wireless network successfully for a year. Upon moving and obtaining new wireless network I cannot find instructions for changing wireless network for printer to recognize.

Hi,
Just connect printer to a new Network, like a brand new printer. Here are the manuals (many parts).
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT3500 How to connect iphone with wireless printer

I have HP 8600 plus printer which is wireless connected. I need to print from iphone/ipad and would like to know how to give command from iphone/ipad to print or first detect a printer and print

Not sure of the specifics of your network/computers, I use Airprint Activator on my Mac which offers up any installed printer on the network as an 'Airprint' printer which iphones/ipads can see.
http://netputing.com/airprintactivator/airprint-activator-v2-0/
I'm not sure if a PC solution exists for this.

HT3500 How to connect printer to airport

Similar Messages

Maybe you are looking for