HT3500 Printer driver just stops working

Printer driver just stopped working. HP Photosmart c410 wifi, connected to Mini OS 10.8 and Airport. Sez "Printer is not connected" but it is. Doesn't work from other Macs on the network either.
It has worked fine up until just now. Tried printer OFF then ON. Tried to re-install driver, but I can't seem to do this. The correct driver cannot be selected.

hi
i have the same problem with the centro
did you found a solution?
farmer
Post relates to: Centro (Unlocked GSM)

Similar Messages

HP printer has just stopped working with Airport Extreme

Hi,
I recently purchased the airport extreme and when I first got it, I set up my HP C4180 to work with it. I was able to print from my macbook pro, my mini and my girlfriend's PC. Just recently, I have been unable to print from any of them. I can print when I plug the USB directly into my MBP but not through airport. It shows up in the Airport Utility but cannot be seen when I try to add it through the printer utility in System preferences. Any ideas how to get it back?
Thanks

I would suggest reading a number of the recent, similar topics for all the different printer brands. There are two main strategies: the Apple article on rebooting your airport station and printer, and the "Airprintfix" strategy for a particular problem in which your printer starts to print, then hangs after an inch.
I have done both fixes today, as I've had both problems - yours and the partial print one. I'm back in business, after patiently trying out all suggestions on bth my machines.
I've got a Canon pixma 950, and I agree with posts elsewhere that it seems to be a general problem with printing, and not with a particular brand. Hoping for firmware and OSX updates so we can all get back up to speed!

Deskjet 1050A j410 series just stopped working

My deskjet printer has just stopped working. I have printed fine with it for a few months. Just tried to print something & it just won't work. I press the print button the preview comes us, I press OK ... then nothing. I have looked at the printer queue & it says document pending. I have tried pausing & restarting, and cancelling and printing but to no avail. Please help !
Thanks
Tash

Hi tashcoops,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are unable to print.
I will be happy to help you.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
Printing a Self-Test Report.
I have provided a document for Print Jobs are Stuck in the Print Queue. Just follow the steps to see if this will resolve this issue. The Print and Scan Doctor might resolve the issue automatically.
Hope this helps.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?

My 13" macbook just stopped working. When you turn it on you get a white screen and hear a repetitive clicking sound on the left side. Is this the hard drive? Any suggestions on replacement drives?
Thanks

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

HT3492 I have an Acer S239HL display monitor connected to my MacBook pro that just stopped working. Acer customer support said I needed to refresh the display adapter driver. How or where do I find this?

How do I update or refresh the display adapter driver on my MacBook Pro? I have it connected to an Acer display monitor that just stopped working. Acer custoemr support told me I need to refresh the display driver. ANy suggestions on how I do this? Or what I need to download or update/ Thanks.

So the display WAS WORKING connected to your Mac?
Restart your Mac.
Try the monitor on another computer, Mac or Windows, to see if it works at all.

Satellite A60-652: ati2dvag driver has stopped working

Hello,
Recently I have some problems with my graphics. My satellite freezes up, and goes to a low resolution with a few colours. A message says the ati2dvag driver has stopped working. After rebooting the satellite shows a blue screen and reboots...same thing happens. Only shutting down and retrying after a few minutes gets me back to normal Windows.
I tried to look for some new drivers, but I can't indicate my model (SA60-652)... is this model too old for updates???
Toshiba SA60-652
ATI MOBILITY RADION 7000 IGP
ati2dvag driver (6.14.10.6430)
Windows XP (SP2)
AVG virus scan
Hitman Pro anti-spyware
ATI hydravision installed but never used :-/
Notebook recently has been rising in temperature...I will deal with this after my final thesis (8 may)
Please can you help me?
If you can, please be clear in instructions, 'caus I don't know a lot about computers... (PEBCAC)
Thanks!

Thank you for this answer,
I found the driver myself, uninstalled the old one and installed the new one (same driver, so actually just a reinstallation).
I use the programm Speedfan to monitor my cpu-temp, and I noticed a few months ago that temperature stayed between 60 and 70 degrees. Now my laptop is easily rising to temperatures of about 87 degrees. Think this is the answer... The notebook even completely stopped working suddenly a few weeks ago, due to high temp. I will look into it to clean the fans and stuff. Guess I'll find some more info on that on other forumthreads.
Thank you for your help
Jeroen

Can't open a dng or raw file in cs5, just stops working. So many problems in cs5!

I totally feel for you. Just upgraded from cs4 to cs5 and it was the biggest mistake i ever made. It will probably end my livelihood as a photographer since EVERY time i open a raw file it crashes photoshop, makes it freeze up after i have adjuted the file in camera raw then I hit open; i get a few bars then it just stops working.
Even got tech help, which helped when i was on the phone with them. The next day the problem came back even when I danced the same jig that I did when I had the guy on the phone - he had me move a raw file on to the desktop rather than take open from my hard drive, then I was able to open it, so we came to the conclusion that my drive was corrupt. I had the same information backed up on a brand new hard drive so we compared files from the each drive against the other. The files from the new drive opened successfully. Yesterday. Now Photoshop cs5 doesn't open any raw or dng files at all from anywhere so it can only be a problem with photoshop. We thought we had the problem solved but we did not. This never happened on CS4 unless i was trying to open 30 or more raw files, and even then it gave me a warning that it had no more ram, it didn't just lock up and do nothing. I'm at my wit's end. Even though there are a lot of great new things in cs5, they aren't very useful if you can't use the product to do the simplest thing.

1) Install the Photoshop 12.0.1 update
2) Install the latest ACR update.
If problems continue after that, then there probably is something wrong with your system.

My Mail search feature in Snow Leopard just stopped working

My search feature for Mail in snow leopard just stopped working. I had a system crash while trying to reformat a corrupted flash drive. Now when I search in mail it just spins the color wheel. Any suggestions?

Hello FredBus,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand your TouchScreen stopped working and you are inquiring as to whether you can toggle it off and on.I would be happy to assist you, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this we can provide you with accurate information.
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Ever seen the error "ialmrnt5 display driver has stopped working normally"?

Have a user who hasn't used E-test in about a year. He has version 8.01.0249 with IE 7.0 and is getting an error running a script: "Windows display driver stopped responding. The ialmrnt5 display driver has stopped working normally . . . .".
On a different machine with E-test 7.0 with IE 7.0, the same script works fine.
Should I have him upgrade to version 8.20.0526? Also, assuming I upgrade his version, why does the same script work with E-test 7.0?
THANKS!

Hi,
It would be better to upgrade to version 8.20.0526. Prior to eTest Suite 8.20.x there was no support for IE 7. There were some cases where eTest Suite would work with IE 7, but it was not consistent since the product did not has IE 7 contemplated in the design. That can explain why it works with e-Test Suite 7.0.
Additionally in 8.20.526 there are several additional features that makes the tasks easier, and there are several bug corrections that can save you time when troubleshooting scripts.
If you are planning to use eTester for Load testing scripts I would recommend moving to 8.20.0569, which has additional bug fixes that can save you a call to support.
You may want to contact your Empirix Sales Rep in order to know if your license would work with the latest version of e-Test Suite or just install it and try the license.
Once you install e-Test Suite 8.20 make a quick test to see if it works with your web application, then, consider the alternative of upgrading all the other computers that will have eTest Suite. It's better to work in a consistent environment where everybody has the same version because you will ensure compatibility of scripts and configuration settings, it will be easier to maintain your environment, and it will be easier to troubleshoot computer problems since you should all have the same configuration.
e-Test Suite 7.0 may not be supported since it's older than two releases than the current one, even if the script work with e-Test Suite 7.0 I would look for the upgrade.
Regards,
Zuriel

Drive suddenly stopped working

Hi there, can anyone help/advice on this issue. My Lacie external firewire drive suddenly stopped working, the green light on the power pack had died so i replaced the powerpack thinking this was the problem. Still nothing. Te HD does not show up on the desktop or disk utility. The drive does not seem to power up audibly like before, although the blue light comes on. I have tried it on several other newer more powerful macs in the office and still no joy. Ideas? thanks

hi there, thanks for getting back in touch. Yes I guess it could have just died The power brick is rated the same yes, same input power and output, also tested on another brick which belongs to another drive exactly the same. I dont think there is any warranty, it is about 5years old. Not tried the USB, I will give it a try though. Not sure what the drive configuation is inside the case, but may try and remove them and put them in another case, see if I can get any data off. Thanks

DHCP just stopped working !?

Hi, I have Macbook Air SSD running Leopard 10.5.2 (9C7010). Boot ROM version MBA11.00BB.B03
It would appear that in the middle of the day, DHCP just stopped working. It doesn't matter whether wireless or connecting via the USB ethernet adaptor. If I want to get network connectivity, I have to manually assign the right IP address, router address, subnet mask and DNS addresses.
While I was travelling from UK to India this weekend, DHCP just stopped working - default "Automatic" network location.
It worked at home, it worked from the BA airport lounge.
When I arrived at hotel in India, I could not connect. Network Prefs reported a locally assigned IP address. I contacted their IT dept and got static IP address, router address, DNS addresses, and then everything was fine again.
In the office in India, no joy again with DHCP and it reported locally assigned IP address. Again, when I got static IP/router/DNS from our IT helpdesk, everything was fine.
Now I returned home, and it's just the same. DHCP not working, but if I assign a static IP address on my own home 10.x.x.x subnet and manually tell it the gateway address and DNS servers, everything is fine again.
I have rebooted quite a few times. I didn't install any new software or change any settings - it seems to have simply stopped working on the plane between UK and India !
Anyone else had DHCP problems like this ? Or have any idea how to get it working again ?
Cheers
The Baron.
Message was edited by: Baron15

Just got back from the Apple Genius Bar.
They booted my MBA from a separate boot disk, and the DHCP worked fine. That proved it was a software settings fault rather than a hardware fault.
They then tried deleting all the Locations from network setup, and adding a brand new fresh one. Sadly that had no luck.
They then advised me to try an archive/install of OS X from the original media. If the archive/install doesn't work, they said to come back to the Genius Bar with the install media and they will book a longer appointment
When I got home, I first created my own boot disk on a spare USB hard drive, and confirmed that if I boot my MBA from this fresh installation, the DHCP works just fine. So I am hopeful about the archive/install.
I am trying it now. If I have any luck, I will let you know. Also how painful it is copying over previous user settings, applications and so on.
TB.

Airport just stopped working

Hi Everyone,
I hopw someone has some info that might help.
I have a MacBook and PC (yuck). Both just stopped working with my Airport Extreme, and when I tried plugging the ethernet cable directly into both, nothing happened. No data was transferring.
I called my cable company and they were able to get my PC working, directly connected, but not the MacBook.
When the ethernet cable is plugged directly into the MacBook, nothing happens...no lights showing it's connected to the computer. When I connect the ethernet cable to the Airport, everything lights up, showing a connection, but I can't get the data to transfer from Airport to MacBook (or PC for that matter).
Right now, I'm hijacking someone else's wireless signal in my condo...don't really know who. So, I know my Airport card is working properly.
The tech at Brighthouse cable saod something about earthlink customers having trouble recently because of something that earthlink downloaded to them, where IP addresses wouldn't renew. I never downloaded anything, is this possible?
I'm really stumped, and frustrated because I can't connect, and it's not feasible for me to hardwire in due to the location of my cable modem. Plus, that only works with the crappy PC, and I don't want to use that.
Please, someone help...I'm desperate...and at a loss for what the problem could be!
Thank you!!!!
EDIT: I just powered up my old iBook G4, and it won't connect to my base station either
EDIT X2: I should probably add what I have already tried...I have (several times) unplugged the cable modem and Airport base station. Used Airport set up to re-set it (again, several times).

Ok MCOJerry,
Here's the scoop.
My friend called and gave me the story much like you described. Almost identical in fact.
He had called TimeWarner, who didn't come to any resolution and then referred him to Earthlink, washing their hands in the process.
A over seas tech support then spend a couple of hours, then made a call back with another tech. who also spent significant time on the phone. This time the tech reconfigured OSX a couple of times. Set up alternate location profiles, changed the DNS settings etc.
They re-assigned the IP address and forced the cable modem to init. the MAC address list. They also disconnected the Airport Extreme (the square version) connected the mac directly to the modem and forced a manual set of IP settings.
They got the mac to work with this last configuration, but of course the rest of the machines were out of luck as was the network printer.
All in all he spent six hours on the phone.
When I got 'the call' I had him give me some preliminary network stats and then had him reconnect the Airport Extreme. This yielded a dead internet connection.
So as I wrote earlier, I went over there armed with a boat load of tools & cables.
I reconfigured the mac to a normal & stable automatic type configuration. I also reset the the Airport buy pressing the reset button for 5sec. Then set up a new configuration. I made sure that the latest update was applied to the Airport extreme.
Then I logged on to the cable modem. Don't mis-understand, I did not log on to the internet through the modem. I logged on to the modem's internal web server. checked some logs and ran a couple of tests.
Then I found the problem. The real problem: The signal power level from the point of demarcation (at the pole) was so low as to be useless. Eliminating the Airport Extreme, simply removed a level of complication in the system. It also may have removed some spurious RF that may have been introduced into the network. It did not result in a resolution to the real problem.
The cable line needs to be physically repaired. Either a wet connection or a frayed shield or the line needs a booster. But the problem, which looked like a Airport extreme issue is in fact a bad cable line.
I do have him up and running on the Airport Extreme at this moment by eliminating all extraneous length from his cable line within the house. The cable modem is now located in the basement where the cable enters the house. I have an single ethernet cable running from there to the Airport Extreme. I pulled all the other electrical items from this particular power line branch (This specific circuit.) This is all temporary until the cable guy/gal arrives to fix the problem.
I hope this may help you in your trouble resolution.
-Alan
Specs:
Motorola SB 5100 Cable Modem.
minus (-)5db signal power level
Software Version: SB5100-2.3.2.5-SCM01-NOSH
Hardware Version: 3
MIB Version: II
GUI Version: 1.0
VxWorks Version: 5.4
OSX 10.4.9
Airport Utility 5.1 (510.18)
Airport Extreme Base Station (square model) V7.1
Open DNS
208.67.222.222
208.67.220.220
AlBook, TiBook, iMac, iBook Mac OS X (10.4.9) Corporate / mixed environment / multiple networks.

Classic just stopped working?!

Hey guys, i mainly only use os 9 classic for my canon scanner & recently classic has just stopped working. whenever i try to start it, it just sits there in the loading screen, ive left it for a long time & nada. also the other ***** is that canon hasnt made any os x software for this particular scanner, just drivers. ive tried reinstalling that driver & of course hasnt made a difference
any ideas of what to do? is there a way of reinstalling classic? would that solve it?
thanks ahead of time
dale-

thanks again charles. i tried to repair the disk, but
everytime i would verify the disk it would find a
problem (it wouldnt tell me what), but it wouldnt
allow me to repair, it was fogged. i tried restarting
with the install disk & still couldnt find anything.
This sounds as though you have a serious directory problem. If you don't have Disk Warrior, or if DW can't fix the problem, then I'd back everything up. If necessary, buy an external hard drive and get hold of Carbon Copy Cloner or SuperDuper!. Either CCC or SD! will make a complete backup of your system to another volume.
Once you've made the backup, reformat the original volume and restore the backup to it.
so i checked on the apple help site for fixing
classic & all i did to fix classic was reselecting
the system i wanted to start up my computer in the
startup disk menu in system pref. now it works,
messed up.
'Messed up', how?
also i ended up calling apple on getting my computer
to repair my disc & the woman on there told me that
software isnt included in the one year warranty, ***?
Apple has never included software in their one year warranty.
how is hardware which costs money to replace is
covered, but software isnt? it doesnt cost anything &
they should be just as resposible for software as
they are hardware. sorry for the little rant, its
just crazyness
No-body warrants software.
so thanks again charles
no problem.
d-

Wireless just stopped working..

Hi,
My wireless used to work but not it just stopped working and it works sometimes but mostly not.
I have three other mac laptops in my house and a few computers and they all work with the linksys router and they get on wireless fine.
but when I try to connect with the windows vista laptop it says this computer does not have a wireless network adapter installed and configured...?
and the wireless switch is always orange no matter which way I turn it.
how do i connest to wireless!
thanks so much in advance
the model is a 32-bit hp pavilion dv600 - dv6405us
Message Edited by computersrcool on 08-22-2009 04:37 PM

You may want to ask this on this forum for computer networking. This one is more for networked printer problems.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Airport Extreme Card just stopped working -help!!

I've had my MacBook Pro since mid August with a built Airport Extreme Card. It has for most of the time been working fine with my Netgear router. Yesterday it just stopped working. The black bars aren't showing on the aiport, it keeps refusing to accept the WEP password.
I have tried switching the airport on and off, and have also switched off the router and re started it, all to no avail. The WEP password is correct.
I have a WIFI printer connection and the airport will not connect to that either.
This has happened once before about 6 weeks ago but I can't remember what I did, if anything, to remedy the situation.
I have 3 other laptops all working perfectly well on the system, and all printing from the printer without any problems.
Any suggestions before I and the laptop go hurtling through the first floor window?

Hello MiBy. Welcome to the Apple Discussions!
I've had my MacBook Pro since mid August with a built Airport Extreme Card. It has for most of the time been working fine with my Netgear router. Yesterday it just stopped working. The black bars aren't showing on the aiport, it keeps refusing to accept the WEP password.
Try resetting your MBP's PRAM ...
Reset the PRAM
o Shut down the computer.
o Turn on the computer.
o Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
o Hold the keys down until the computer restarts and you hear the startup sound for the second time.
o Release the keys.
(ref: Resetting your Mac's PRAM and NVRAM)

HT3500 Printer driver just stops working

Similar Messages

Maybe you are looking for