HT3529 Facetime Problem on ipad for adding the number.

I am not able to add my new number to my ipad facetime and iMessage. i tried all basic steps i also did factory reset of the ipad still i am getting my old mobile number only .

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Similar Messages

When using my ipod touch to facetime with my ipad, why does the sound on the ipad echoes/repeats?

when using my ipod touch to facetime with my ipad, why does the sound on the ipad echoes/repeats?

Bunyip6 wrote:
... so I am assuming it should not need to be reset/
It will not hurt to try a Reset... this is one of the First steps in Troubleshooting...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

HT5621 I have changed my apple id recently and the changes have been reflected on my iPad for both the apps store and the iCloud, however, my iphone still insist on using my old apple id for the iCloud while the app store is fine. how can i correct the pr

I have changed my apple id recently and the changes have been reflected on my iPad for both the apps store and the iCloud, however, my iphone still insist on using my old apple id for the iCloud while the app store is fine. how can i correct the problem?
Thanks

Hi Baem_leeds
Welcome to the Support Communities!
If you change your Apple ID you will need to sign in with the new information or password the next time you use an Apple service or feature that uses Apple ID. If you have multiple devices that use features and services that require an Apple ID, you will need to sign in again on each device.
The links below will provide additional information:
Where can I use my Apple ID?
http://support.apple.com/kb/HT5616
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Judy

My children enters wrong password several times on problem my ipad ..., the was it is indicated that it was disabled ... how can i access my ipad thanks please help ... thank you

my children enters wrong password several times on problem my ipad ..., the was it is indicated that it was disabled ... how can i access my ipad thanks please help ... thank you

If it's reached the point where you can't try re-entering the code then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it - from http://support.apple.com/kb/HT1212
If you repeatedly enter the wrong passcode, your iPhone, iPad, or iPod touch will be disabled for longer intervals before you can try again. After too many unsuccessful attempts, you won't be able to try again until you connect it to the computer with which you last synced it.
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808

Visio 2010 Validation for Checking the number of a specific type of shape.

I have written a rule for flowchart for checking the number of Start/End Shapes in a document.
The FilterExpression is as follows:
AGGCOUNT(FILTERSET(SHAPESONPAGE(), HASCATEGORY("Start/End"))) > 0
The TestExpression is as follows:
AGGCOUNT(FILTERSET(SHAPESONPAGE(),HASCATEGORY("Start/End"))) = 2
(Since totally there are 2 shapes: 1 Start and 1 End Shape)
However, it is not working. Can anybody tell me what is wrong in the expressions.

Well, it worked for me, so I want to check that you modified the Start/End master to have the User.msvShapeCategories row with the value "Start/End", as I did?
A Category is not a Master
David J Parker MVP (Visio) http://blog.bvisual.net

Reports for Count the number of External Candidate Registration - ERecruitment

Dear Experts
Anyone know a reports for Count the number of External Candidate Registration - ERecruitment?
Thanks
Regards

http://scn.sap.com/thread/784769 http://scn.sap.com/thread/1625606 read here!

My iPad has connect to the wrong number for imessage and facetime. How do I change the number on my iPad for imessage and faceting?

When setting up my new iPad and entering my own Apple ID my sisters number appeared on the imessage and facetiming; however her number is not associated with my Apple ID. How do I change the number to my own?

Turn iMessage and FaceTime off, reset the device by holding both buttons until the apple logo appear then let go and wait for it to restart. Then turn iMessage and FaceTime back on and enter the settings again

Problem in bdc for adding another inspection type in mm01

Hi,
i had made a code in which it will maintain the quality view and there it will going to insert twi insoection type ZSTAGE and 03 . Te problem is when it uploads the value of 1 inspection type it works fine but when it is going to insert another insoection type i.e. 03 it again picks up the zstage .
plzz provide me guidlines how to solve this problem that both of the inspection type should be inserted.
here's d link for the code:-
http://docs.google.com/Doc?id=dfxswwff_1p9zdnnf2
Edited by: ricx .s on Apr 20, 2009 8:48 AM

ur code looking ok..
just change it..
call function <b>'WS_UPLOAD'</b>--->to <b>gui_upload</b>
EXPORTING
FILENAME = p_fl_mct
FILETYPE = 'ASC'
TABLES
data_tab = Tmp_tab
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
OTHERS = 10.
if sy-subrc <> 0.
message e398(00) with 'Unable to upload data'.
endif.

BR0252E Function mkdir() failed for adding the data file

Dear experts.
I assigned new file to data file, i face below error
BR0280I BRSPACE time stamp: 2010-12-15 10.38.26
BR0681I Enter string value for "file" (<file>|<sapdata>|<N>) [/oracle/DBP/sapdata7/sr3_70/sr3.data69]:
/oracle/DBP/sapdata8/sr3_70/sr3.data69
BR0280I BRSPACE time stamp: 2010-12-15 10.38.46
BR0683I New value for "file": '/oracle/DBP/sapdata8/sr3_70/sr3.data69'
Error
BR0252E Function mkdir() failed for '/oracle/DBP/sapdata8/sr3_70' at location BrDirCreate-1
BR0253E errno 13: Permission denied
Regards,
kalees

>>BR0252E Function mkdir() failed for '/oracle/DBP/sapdata8/sr3_70' at location BrDirCreate-1
Make sure the sapdata8 is owned by ora<SID> and dba group.
and you are adding the datafile using ora<SID> userID.

FaceTime problem on ipad

When I attempt to login to FaceTime from my iPad 2 I get a message that it cannot verify my email address and prompts that I check a link that has been emailed to that address. I have been successful in logging in but then tried to set up the ipad with my wifes account before abandoning that and returning to my own account. Now it is fubared. There is no email and therefore no link to verify. I use my apple I'd, I have access to that email account. Any thoughts anyone?
Thanks

Apple isn't listening to you on this forum, eedeebee.
They'll listen to you here: http://www.apple.com/feedback/ipad.html

An extra charge for changing the number of rings before voicemail picks up??

After trying all the tips I could find about changing the number of rings it takes before the voice mail picks up (the 58#, trying access setup on the vm, changing it online, etc…), I finally called the customer support line. I was put on hold for a few minutes (not a problem) only to have the customer service person return to say that he cannot change it because I would have to pay for the "upgraded" voice mail that is not included in my plan (the plan I just signed up for last month). I find it absolutely absurd that moving the number of rings for vm from 4 to 6 justifies an added cost. If anyone knows the magic on how to do this for a line that is in the Dallas Ft Worth area, I would be very appreciative. As for the extra charge to adjust your own voice mail, you can draw your own conclusion on how fair that is...
And I don't buy that it is not as simple as it appears... if you can program the thing to pickup on three rings then you should be able to adjust the forwarding and vm to pick up on 6. i have never had this problem with any other carrier.

I called tech support, not customer service, and had my rings moved back a few so my answering machine would pick up first. Voicemail is for back up in case I don't answer call waiting.
It was free.

I have buy a cd of lightroom 4 but i can't out a cd with my macbook air so i want to use a link for complete the number serie to have lR 4

Hello ,
I have change my macbook pro for a mac book air for my travels ,
so now i want to install lightroom 4 that i have buying but can't put a cd in my macbook air
So
I have try the lightroom version 5 for 30 days but now I want to use my version of LR 4
can you send me the link to install with the number serial serie please
thank you for you response .
Miss HADJADJ

I don't see the actual link in Jim's post.. here it is:
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 4.4

Problem with a script making the number of lives change

http://www.zshare.net/download/super...flash-fla.html
- The fla file (As my code is all over the place you probably might
want to look at this)
The lives doesn't work. I made a movie clip with different
frames and on each frame there are different numbers of hearts
on.The code on the frame mario dies is:
Code:
onEnterFrame = function () {
if (_root.healtha._currentframe != 1) {
_root.healtha.gotoAndPlay(_root.healtha._currentframe-1);
if (_root.healtha._currentframe == 1) {
_root.healtha.gotoAndPlay(_root.healtha._currentframe+3);
if (_root.healtha._currentframe == 3) {
_root.gotoAndPlay("scene2", 1);
} else {
_root.gotoAndPlay(2);
The movie clip containing the hearts should be at
_root.healtha So i want when mario dies the number of hearts goes
down and when the number of hearts is zero and he dies (when
_root.healtha is on frame 3) you go to scene2.
Thats the code for the fla file i uploaded the new code is:
onEnterFrame = function () {
if (_root.healtha._currentframe == 1) {
var aa:Number = _root.healtha._currentframe+3;
_root.healtha.gotoAndStop(aa);
} else if (_root.healtha._currentframe != 2) {
var bb:Number = _root.healtha._currentframe-1;
_root.healtha.gotoAndStop(bb);
} else if (_root.healtha._currentframe == 2) {
_root.gotoAndPlay("scene2", 1);
_root.gotoAndPlay(2);

does that onEnterFrame only execute when mario dies? if so,
it doesn't need to be in an onEnterFrame loop? if not, that code
won't work.
so, assuming it works (label the first frame in scene 2 and)
use:

Best practice for reducing the number of XML files in an IDML file for translation?

Our engineering team is looking for ways for us to reduce the number of XML files produced when a (relatively) simple 2-page INDD file is saved out as IDML for translation?

IDML contains quite a few XML files, but I suspect you're only interested in the Stories folder if you're working on a translation. The way to do that is... to reduce the number of stories. If it's a two-pager, chances are that you have a whole bunch of unthreaded text frames. Thread them in logical reading order. This will help the translator(s) as well - by threading frames in logical reading order, they don't have to work to read the document in the same order as the target audience.

When i send an imessage to another person with imessage, my husband also receives the message, even though it was not sent to him. We have always been on the same itunes account and not had this problem, however, when i added the ipad, this started.

When I send an imessage on my ipad to someone, my husband also gets the message, even though he was not selected as a receipient. This just started when I got my ipad and sent a message for the first time. As a side note, my daughter received an itouch and both my husband and i were getting all messages she sent, no matter which one of us they were sent to. I turned her imessage off. We have all of our devices under the same itunes account so that we can share all music and apps. How can we get around this? I do not want him receiving all imessages that I send, this will get very annoying to him.

You can have a separate AppleID only for iMessage and keep using the other one for iTunes.
Just change the AppleID used for iMessage in Settings > Messages > Receive At

HT3529 Facetime Problem on ipad for adding the number.

Similar Messages

Maybe you are looking for