HT3529 Has anyone experienced problems sending pictures on message today?

Has anyone experienced problems sending pictures on Imessage today? Even mail has been taking a long time to receive. I work near newark airport.

Last I checked you could not access RoadRunner outgoing mail servers from outside of the RoadRunner network (i.e., the AT&T EDGE network). You can use cwmx.com as your outgoing mail server, with no ID or password, and that will work while you are on EDGE (but now when you are on WiFi).
As for junk mail, that is the scourge of the internet. Many people have many solutions - I can share with you mine. I had all my email forwarded to a free GMail account. GMail has amazingly efficient SPAM filters, and it has cut down my spam 99%. You can configure your account on the iPhone using the "Other" shortuct in such a way that emails seem to come from your Roadrunner account. The added bonus is that the GMail outgoing server works on both EDGE and WiFi, so you dont have to worry about where you are at.

Similar Messages

  • TS3276 Anyone experiencing problems sending mail using TalkTalk - can receive but not send  - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

    Anyone experiencing problems sending mail using Apple Mail viaTalkTalk - can receive but not send  - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

    jag157 wrote:
    "I managed to solve the problem. Under smtp settings (mail preferences/accounts/edit smtp) I set the outgoing port to 25 (as recommended by Talktalk), no authentication (set to none) and unchecked SSL. I found that until I set the port to 25 and authentication to none I was unable to uncheck SSL. One I had done this I was able to send from my main email and other email adddresses set up under my account."
    Superb advice R&W!  My email sending block using TalkTalk started 2 months ago using Snow Leopard, continued when I upgraded to 10.8.2, and has been persistent on my wife's new iPad (IOS 6.1).  Implementing your wise words has fixed all that, and now enables me to call her on FaceTime — previously only she could call me.  Thank you so much; this will save hours of further fruitless searching and phoning.
    Please remember that your email is now insecure, if you wish to have a secure connection SSL must be on and port 25 should be avoided.

  • Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

    Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

    Welcome to Apple Support Communities
    Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691

  • D800 file compatibility:  Has anyone experienced problems with loading D800 files onto the iPad using the camer connector kit?  I have tried both RAW and JPEG using SDHC and CF cards and the iPad(3) doesnt recognise any of the files.

    Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit?  I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files. 
    I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
    I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
    Any advice appreciated?
    PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.

    If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
    If some files do not import as expected using one mode, try switching to the other mode and importing again.
    Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.

  • TS1424 Has anyone experienced problems, after purchasing an iTunes code from PayPal, in getting iTunes to deliver the code (electronically, as advertised?)

    Has anyone experienced problems, after purchasing an iTunes code from PayPal, in getting iTunes to deliver the code (electronically, as advertised?)

    Has anyone experienced problems, after purchasing an iTunes code from PayPal, in getting iTunes to deliver the code (electronically, as advertised?)

  • HT1766 Has anyone had trouble sending a photo message

    Has anyone had trouble sending a photo message

    Many people (I'm not one of them) have had trouble sending pictures for a very wide variety of reasons.
    If what you're actuallly trying to say is "I'm having trouble sending pictures. Can someone help?" then we're going to need more details. Check with your carrier to make sure your account is properly set up. Go to Settings>Messages and make sure you have MMS turned on. Make sure that you have an active data connection (cellular or WiFI).

  • Has anyone experienced problems with Outlook after installing Mavericks?

    Has anyone else experienced problems using Microsoft Outlook after installing Mavericks?  The computer seems to want to continue reloading emails.

    RobertRTillman wrote:
    1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
    2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
    3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
    4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
    In short, we are screwed and neither company seems to care.
    In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
    Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

  • Has anyone experienced problems w/ "CTPdeSr

    Everyime i connect my Zen Touch to my computer, the first time i try and play a song, it won't play...i've come to the conclusion (after pressing cntrl+alt+del) that some program (CTPdeSrv) slows it down and doesn't allow a song to play when in the MediaSource program. I find that i have to close the program all together and restart MediaSource for any song to play. CTPdeSrv is only on when i connect my Zen Touch to my player? Has anyone else experienced this problem and if so, how can i fix it's Thanks

    Nope, MediaSource is an application. Download the following:
    . Creative Zen and Jukebox Driver Upgrade version .30.03
    2. Creative MediaSource Player/Organizer 3.30.2
    3. Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource
    Install . then connect the player to the PC. Then install 2. and 3. (the player must be connected for 2. to verify you have a Creative product).

  • Has anyone had problems sending emails using via (Road Runner) POP account?

    I cannot send any emails w/ the iPhone via Road Runner POP account.... I have tried everything. From Calling Time Warner to have my Password reset just incase I'm using the incorrect password, which in fact the settings menu for mail says the password for outgoing emails are optional.. I keep getting a message saying "my email was rejected by the server" Is anyone having this problem and if so please suggest any solutions.......
    Does anyone know how to set my mail app on my home computer to only forward the messages I want to my iPhone while moving all other junk emails to my Junk folder on my computer????

    Last I checked you could not access RoadRunner outgoing mail servers from outside of the RoadRunner network (i.e., the AT&T EDGE network). You can use cwmx.com as your outgoing mail server, with no ID or password, and that will work while you are on EDGE (but now when you are on WiFi).
    As for junk mail, that is the scourge of the internet. Many people have many solutions - I can share with you mine. I had all my email forwarded to a free GMail account. GMail has amazingly efficient SPAM filters, and it has cut down my spam 99%. You can configure your account on the iPhone using the "Other" shortuct in such a way that emails seem to come from your Roadrunner account. The added bonus is that the GMail outgoing server works on both EDGE and WiFi, so you dont have to worry about where you are at.

  • Has anyone experienced problems moving from ModileMe to iCloud?

    I have MobileMe installed on my iMac 27.  When I try to switch over to iCloud I get an iCloud window that that has a button that says "Move to iCloud".  When I select the button I'm asked to reenter my passward as though I attempting to use the "Find My iPhone" application.  At the bottom of that window I get a button that says "Open icloud.com".  When I select that button I'm asked to enter by iCloud ID and password.  I enter that information and it puts me in to the "Find My IPhone" application.  When I use the the back arrow I get to a window that has Mail, Contact, Calendar, and Find My iPhone icons.  It appears that everything is setup, but when I exit I have to go through the same process everytime as though it didn't move anything to to the Cloud.  When I select iPhoto and Apperture to turn on PhotoStreaming the system tells me I have to log in to iCloud in system preferences to do this.  I see no way to turn on PhotoStreaming on my iMac.  Can anyone help?

    I solved the problem.  I first needed to go to my System Preferences under the Apple icon on the right and select MobileMe so I could logout of it.  Once I was logged out, I was able to setup iCloud properly and activate Photo Streaming on my iMac 27.  I got a clue to this solution by reading others who were having a similar problem.

  • Has anyone experienced problems with outlook mail after ios6

    Starting with the release of iOS6 I have had a problem with mail making it to my desktop. I never had this problem before.  The mail arrives fine on my iPad and iPhone, but it's not in my ourlook inbox.  Any ideas?  I have the iPhone 4 and the original iPad.  I have checked the settings and the "mail" option is set to "on" on both devices.

    RobertRTillman wrote:
    1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
    2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
    3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
    4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
    In short, we are screwed and neither company seems to care.
    In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
    Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

  • Has anyone experienced problems saving downloaded pdf files in Yosemite?

    In Mavericks, I could choose the pdf file destination folder using the save dialog box's "search" entry to select the folder to save a file in. Now the search feature seems to have been disabled. Yosemite appears to have implemented a new method to choose a destination folder. It sometimes allows me to navigate to a parent folder and get a list of sub folders that I can scroll through to choose the desired one. Problem is that the feature seems to be unstable - I can't reliably get this feature to work and wonder if I can downgrade to Mavericks.

    In Mavericks, I could choose the pdf file destination folder using the save dialog box's "search" entry to select the folder to save a file in. Now the search feature seems to have been disabled. Yosemite appears to have implemented a new method to choose a destination folder. It sometimes allows me to navigate to a parent folder and get a list of sub folders that I can scroll through to choose the desired one. Problem is that the feature seems to be unstable - I can't reliably get this feature to work and wonder if I can downgrade to Mavericks.

  • HT5815 has anyone experienced problems with this update.

    After insaling it I cannot log on to my mac? had to restore to my latest timemachine backup

    Quite a few people have problems with every update. Almost always it is tied to third-party software incompatibility.
    If you run into a problem like that, boot into Safe Mode. If that succeeds, it is definitely a third-party software issue.
    http://support.apple.com/kb/HT1455
    Some company's just can't be bothered making their software compatible with each release.

  • Has anyone experienced problems with their airport express since yosemite?

    Since updating to Yosemite, I am constantly having issues with my Airport Express.  It flashes yellow, indicating no connection.  I have attempted to:
    Soft Reset:  Unplug it (Airport Express) and plug in again
    Factory Reset:  Unplug it, push & hold the reset button with a paper clip while pulling it back in.
    A Tip From Another Site:  Unplug our Time Capsule we use as a router & the Airport Express, wait 3 minutes - then plug in the Time Capsule, wait another minute - then plug in Airport Express.  This worked for a very short amount of time, then the light started flashing yellow again.
    Again, I had no problems before updating to Yosemite.
    I look forward to & appreciate any help resolving this issue.

    Hi I have the same problem after upgrading to Yosemite
    I don't know why some times ping request to airport extreme is so long:
    64 bytes from 10.0.0.254: icmp_seq=3529 ttl=255 time=0.892 ms
    64 bytes from 10.0.0.254: icmp_seq=3530 ttl=255 time=0.875 ms
    64 bytes from 10.0.0.254: icmp_seq=3531 ttl=255 time=0.831 ms
    64 bytes from 10.0.0.254: icmp_seq=3532 ttl=255 time=0.802 ms
    64 bytes from 10.0.0.254: icmp_seq=3533 ttl=255 time=1.172 ms
    64 bytes from 10.0.0.254: icmp_seq=3534 ttl=255 time=0.951 ms
    64 bytes from 10.0.0.254: icmp_seq=3535 ttl=255 time=6.246 ms
    64 bytes from 10.0.0.254: icmp_seq=3536 ttl=255 time=26.014 ms
    64 bytes from 10.0.0.254: icmp_seq=3537 ttl=255 time=71.004 ms
    64 bytes from 10.0.0.254: icmp_seq=3538 ttl=255 time=117.939 ms
    64 bytes from 10.0.0.254: icmp_seq=3539 ttl=255 time=171.653 ms
    64 bytes from 10.0.0.254: icmp_seq=3540 ttl=255 time=207.489 ms
    64 bytes from 10.0.0.254: icmp_seq=3541 ttl=255 time=0.812 ms
    64 bytes from 10.0.0.254: icmp_seq=3542 ttl=255 time=0.670 ms
    64 bytes from 10.0.0.254: icmp_seq=3543 ttl=255 time=8.185 ms
    64 bytes from 10.0.0.254: icmp_seq=3544 ttl=255 time=0.935 ms
    64 bytes from 10.0.0.254: icmp_seq=3545 ttl=255 time=0.693 ms
    64 bytes from 10.0.0.254: icmp_seq=3546 ttl=255 time=0.793 ms
    64 bytes from 10.0.0.254: icmp_seq=3547 ttl=255 time=16.345 ms
    64 bytes from 10.0.0.254: icmp_seq=3548 ttl=255 time=62.348 ms
    64 bytes from 10.0.0.254: icmp_seq=3549 ttl=255 time=106.804 ms
    64 bytes from 10.0.0.254: icmp_seq=3550 ttl=255 time=152.399 ms
    64 bytes from 10.0.0.254: icmp_seq=3551 ttl=255 time=200.171 ms
    64 bytes from 10.0.0.254: icmp_seq=3552 ttl=255 time=1.027 ms
    64 bytes from 10.0.0.254: icmp_seq=3553 ttl=255 time=0.736 ms
    64 bytes from 10.0.0.254: icmp_seq=3554 ttl=255 time=1.033 ms
    64 bytes from 10.0.0.254: icmp_seq=3555 ttl=255 time=1.020 ms
    64 bytes from 10.0.0.254: icmp_seq=3556 ttl=255 time=0.981 ms
    64 bytes from 10.0.0.254: icmp_seq=3557 ttl=255 time=0.967 ms
    64 bytes from 10.0.0.254: icmp_seq=3558 ttl=255 time=0.866 ms
    64 bytes from 10.0.0.254: icmp_seq=3559 ttl=255 time=41.596 ms
    64 bytes from 10.0.0.254: icmp_seq=3560 ttl=255 time=86.209 ms
    64 bytes from 10.0.0.254: icmp_seq=3561 ttl=255 time=133.951 ms
    64 bytes from 10.0.0.254: icmp_seq=3562 ttl=255 time=180.552 ms
    64 bytes from 10.0.0.254: icmp_seq=3563 ttl=255 time=1.063 ms
    64 bytes from 10.0.0.254: icmp_seq=3564 ttl=255 time=1.345 ms
    64 bytes from 10.0.0.254: icmp_seq=3565 ttl=255 time=1.078 ms
    64 bytes from 10.0.0.254: icmp_seq=3566 ttl=255 time=0.945 ms
    64 bytes from 10.0.0.254: icmp_seq=3567 ttl=255 time=1.168 ms

  • Has anyone experience problems with loading the latest Flash Play?

    Has anyone experienced problems with loading the latest Flash Player?  I have done this several times and the same results come up - Install the latest Flash Player.  I run Microsoft Vista.

    What is your browser?  If IE see
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

Maybe you are looking for

  • Attach PDF file in background

    hi all, My requirement is i need to create a PDF file of one report and attech it to 'services for Object' of CJ20N, in background. Is there any direct function module or bapi to do this. i tried to use FM 'SO_OBJECT_INSERT' and BINARY_RELATION_CREAT

  • AS3 swf tiny question

    I have a feeling that I know the answer to this. I am not terribly savvy on Actionscript (basic sklls, not expert)..and not in 3.0 at all!!!!!!!! I have a website that is done nearly all in Flash with AS2.0. I recently added a video player from a vid

  • Tracker Pad Not Working

    My tracker pad has stopped working.  I've changed the batteries twice to no gain.  The indicator light isn't opereating.  Its 18 months old and up until now I've had no problems.  Could anyone advise if this is a common problem, is there a fix or do

  • CS6 Camera raw

    After a recent update while working in Camera Raw off of the bridge I noticed that the workflow has changed.  I can no longer change the size as easily.  Is that normal?

  • HT4623 How can I send email after changing my AOL password on my iPad2?

    After I changed my AOL password due to the latest spoofing scam, I cannot send any emails from my iPad2. I have gone to settings and changed my email password. The latest attempt to resolve this to go to the advanced page and I clicked on sent and no