HT3529 I am trying to figure out if my child was the originator of a group message. If I go to iMessages and tap in a letter it brings up many contacts to chose from as well as groups. Would the groups only show up if she was the originator?
I am trying to figure out if my daughter was the originator of a group message. If you go to iMessages and hit originate a message and type a letter it brings up her contacts as well as groups. Will it only bring up groups if she was the originator or will it bring up any group that she has been in even if she had not created it.
You'll find no issues other than things may not be pre-provisioned for you (the only case where it is important to choose the correct Template is when dealing with Publishing sites and Anonymous access; other templates don't have the ViewFormsLockdown feature
enabled by default, thus potentially disclosing site data in a public fashion).
PowerPivot and PerformancePoint can easily be enabled on standard sites using the Team Site template.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Similar Messages
-
Noob trying to figure out keybindings
I just started using this desktop last week. I'm trying to figure out why I can't change keybindings. I go into Preferences -> Desktop Preferences -> Keyboard -> Shortcuts, and try to change some of the default values, but none of them seem to do anything. I enter a new key combo for, say screen lock (default is Disabled) and the new value gets saved (and is still there when I open it again), but the new setting doesn't actually work. I punch the new combo and the screen doesn't lock. Actions with default values though do work.
Any thoughts what's going on here?I'm trying to set the 'Lock Screen' shortcut to '<Mod4>l'. It lets me set the key combo, but then doesn't recognize it when I try to use it. It does work if I use '<Control>l'. There is a default shortcut using the Mod4 key that does work. The 'Show Run Dialog' setting uses '<Mod4>r' by default, and that one works.
It's not a huge deal, it just would be nice for it to work. -
From the US but in France these days trying to figure out how to get case
I have an iPhone 4, and I got the email about being eligible for the case. I am from the US, and I am now in France for a bit for work. I am trying to figure out how I could get my case shipped to me here instead of back home, since I will not be back there until December at the earliest. I downloaded the app and it will ship to my US address by default, and I am not interested in changing that because I want to still be part of the US zone.
If someone from Apple could help and tell me what to do it would be great. I could not find the right department that could have answered this question when I looked on the support page.
Thanks.These are user forums - Apple will not respond to you here.
Call customer service with the order number and tell them that you need to change the ship to address ... they should be able to do that or you... -
Trying to scan photos from my photo album to a folder on my desktop. Have been trying to figure out for hours. Seems very complicated and cumbersome. Can anyone help? It's got to be much quicker (fewer key strokes) and simpler than what I've been able to discover.
Open the file, parse it, populate an ArrayCollection or XMLListCollection, and make the collection the DataGrid dataProvider:
http://livedocs.adobe.com/flex/3/html/help.html?content=Filesystem_08.html
http://livedocs.adobe.com/flex/3/html/help.html?content=12_Using_Regular_Expressions_01.ht ml
http://livedocs.adobe.com/flex/3/html/help.html?content=dpcontrols_6.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/ArrayCollection.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/XMLListCollection.html
If this post answered your question or helped, please mark it as such. -
Need help- trying to figure out if Spotify would work for my senior living community
We are a senior community that has activity programs running in like 7-10 areas in the building. Music is a big part of our day. CD's for all these areas is getting crazy. There has got to be a better way. We want to be able to pick music genre, a song even to hear and have playlists. What we have currently: We have some laptops and desktop computer using windows. We also have a few MP3 players, boomboxes and IPODS. We also have Wifi. But sometimes of course we have Wifi issues. We have access to usually a laptop or boombox. We could use the MP3 players/ipods. I like the idea of playlists that we share, pulling music that is alike. These are my quesitons or issues below: Things are my questions:1. Can we have 1 account be made for different appliances and be on spotify at the same time? Premium said 3 but you can't be both logged in under each account. Is this still true? Postings were old. 2. With even the Spotify family can you be on to the account at the same time? 3. What would be our best solution for this for accounts- would we have to set up different account for each device if we want to play at the same time? Any ideas - I just really need suggestions4. If we did our laptops, we would need speakers? Also for boomboxes- is this possible? I am assuming using like an MP3 player or IPOD. Spotify work through them? Is it certain type of MP3 players and IPODS. I believe a few of ours are older ones. 5. If we have tons of accounts, can I start all accounts on same computer? Would I set them up by each device we have?6. Can you run ipod/mp3 through large TV speakers? or laptop music through big screen tv speakers?7. For the music itself, can you pick what exact songs in playlist? Can you make lots of playlist per account? I saw 3,300 songs but can you name the playlist and stay forever? Sorry for all the questions. I am trying to figure out if this is even possible or worth doing. If we have seperate accounts - how much monthly is that? Is there a deal for that many devices? Thanks
Spotify has 2 different account types. You can see the difference between the two at the bottom of the homepage: http://spotify.com
1: Each Spotify account can only play on one device at a time. You can have the account logged into as many devices as you want, but you can only play on one device at a time.
2: With Spotify family, there are several Spotify accounts under one plan. Each account is able to play on one device at a time.
Check out the family help guide here:
https://support.spotify.com/learn-more/guides/#!/article/spotify-family
Also check out this thread for information:
https://community.spotify.com/t5/Help-Accounts-and-Subscriptions/Spotify-Family-Q-amp-A/td-p/988520
3: Yes, as stated above
4: You wouldn't necessarily have to have speakers hooked up to the laptop. If the laptop has speakers or you input headphones, that should work. Spotify doesn't work with MP3 players/iPods. To use Spotify you have to have the Spotify app.
You can find a list of compatible devices here:
https://support.spotify.com/learn-more/guides/#!/article/spotify-system-requirements
7: Yes you can search Spotify and add any song you want to a playlist. And you can also make lots of playlists. Each playlist has a limit of 10,000 songs. The 3,333 limit you saw is for the offline limit on premium accounts. Up to 3,333 songs can be downloaded for offline listening.
Hopefully this information helps. The family plan can have up to 5 accounts. It might end up being too expensive for what you need. The free plan has ads, but it still might be worth looking into.
-
I recently set up multiple accounts on my imac, When I was trying to figure out how to share the documents I must have done something wrong. When logged into the Admin account, I open up any document and I get a message box that says, "The Document could not be opened. The file isn't in the correct format. The file might be corrupted, truncated, or in an unexpected format." What did I do and how do I fix it?
Without knowing what you did it is impossible to give advice on how to correct it.
If these were files you copied over from some other system then just Re-Copy them replacing the ones that are corrupted.
Other then that I suggest you Wipe the drive and start over with a clean reinstall of the OS and programs. Then if you want to share files to All Accounts place those files in a folder in the ROOT of the drive. -
My iPhone 4S is not showing up in iTunes. I've never had this issue before, and I'm finding it a little frustrating trying to figure out how to rectify the situation. If anyone knows how to fix this problem, please advise. Otherwise any suggestions would be greatly appreciated.
Hi Josie,
I understand that you are having issues with iTunes recognizing your iPhone 4S. Let's see if we can tackle this.
The following resource will provide helpful steps in resolving this issue, pay specific attention to Steps 3-6 as these usually resolve this sort of issue.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M. -
Trying to figure out how to transfer my ringtones from my 4s to my 5, do anyone know how? Ringtones only everything else transferred.
Hi Friend,
You need to connect your iPhone in your computer and open iTunes.
1. Place your rintones file (.m4r format, up 30 seconds) to a designated area (e.g. desktop)
2. Import your ringtones file into your LIBRARY, NOT directly into your iphone.
3. "TONES" or "RINGTONES" icon will appear on the left hand column under LIBRARY. (You should see Ringtones there. If not..... Click Edit --> Preferences --> General Icon Ensure that Ringtones is checked. If not, check it then click OK…)
4. Drag your ringtones file from your LIBRARY into your iphone.
5. "TONES" or "RINGTONES" icon will appear in your iphone under devices (the tab where Summary, Info, Apps, etc are located)
6. Click Under "TONES" or "RINGTONES" (as mentioned in Fifth) and tick SYNC tones.
7. Look inside your iphone... and there it is
*Set Message Notifications:
Settings > Notifications > Messages >
Notification Center: ON
Show: choose 1/5/10 Recent Items
Alert Style
choose Banners or Alerts
Badge App Icon: ON
Show Preview: ON
Repeat: choose up to 10 times
Show iMessage Alerts From:
choose Everyone/My Contacts Only
View in Lock Screen: ON
To see Notification Center, on Home Screen where your apps icons are, swipe from the top to the bottom. -
am a brand new mac user...trying to figure out how to switch from the Mac Pro screen to my external monitor. Appreciate any help. thanks
In Finder... goto Help... In the Search Window type in Displays...
Lots of Useful Information there...
You may find these Links Useful too:
http://www.apple.com/support/mac101/
http://www.apple.com/support/macbookpro/
Cheers, -
I'm using a XM skydock system and trying to figure out why I cant hear my phone calls through ny radio. I can hear it ring, i can also hear my music play...
What is selected under the Photos tab for your iPhone sync preferences with iTunes?
If the videos are in an iPhone compatible format and are in a folder of photos selected to be transferred to your iPhone under the Photos tab for your iPhone sync preferences with iTunes, do you also have Include Videos selected under the Photos tab?
Or if the videos are in an iPhone compatible format, they need to be in your iTunes library and can be selected under the Movies tab for your iPhone sync preferences with iTunes to be transferred to your iPhone. -
Lumia 920: Still trying to figure out what the pro...
Aside from being very upset about Nokia's not allowing updates for the unbranded 920s, I'm still trying to figure out what the problem is with my camera...
I had nearly a perfect working phone one and a half week ago. Even though the battery didn't last well and heated up somehow and there are gliches with some apps, the phone and its original apps worked without problem. Once the battery died in the middle of the night but I thought that it was because I didn't plug the charger well enough, it's a little loose anyway. I read about the freezes and restarts in different forums and was wondering what people were talking about, since I didn't have any such kind of problems. I felt myself being lucky.
Then I got some app updates (Nokia drive+ and a few others), and ever since then my camera hasn't worked properly. When I open the camera app or click the camera button nine out of ten times it just goes back to the home screen or else it freeze the phone. I have tried soft resets and restarts but they mostly don't work, or they might work long enough to take a couple of photos and then stop working, or otherwise it freeze the phone and need to soft reset it. There is no pattens as to when it works and when it doesn't. I have also tried to uninstall some apps but it seemed to have no effect on the condition of the phone. Every app that utilizes the camera won't work ( camera won't work but other functions work), flashlight app won't work.
Today I decided to hard reset the phone. It's surprisingly easy procedure that took less than 10 min. I did my first hard reset and chose to use my phone's backup files from Skydrive and it went fine, except it didn't do anything to the camera, i.e. it didn't work. My second hard reset I chose to "start from clean table" (or something of such) without any apps installed, and also disabled the automatic update but it didn't do anything either, no working camera. I did the same procedure once more just in case I did something wrong, but it didn't work. The fourth hard reset I restored from Skydrive to have (mostly) everything in order. No working camera either but almost everything else works now.
It puzzles me. I'd though that if the reason of camera not working is some app updates then start from the clean table would have resloved it. Even after hard reset using camera at the very first possible chance didn't succeed: it worked for a very short moment before it froze the phone, just like before resetting. If I can keep myself from touching the camera the phone itself works (aside from maybe once or twice restartd itself, very rarely anyway). Now I have a phone with a camera I can't use and I don't have a clue what the problem is. I don't think that there are hardware problems because the camera *worked*, and I don't believe that software updates can break it hardware-wise. I have thought of changing it but who can promise that I'll get a phone that works better. Probably I should wait for Microsoft's/Nokia's updates, it just feels like they never come...hi mate,
Sorry to hear you are having such a rough time with your 920. In this case, it might be best to take your phone back to your point of purchase and ask for a replacement, and if they are being less than helpful, to take it to your local Nokia Care point instead: http://nokia.com/support
I can certainly empathise with you, as a lot of the issues you describe are apparently fixed by the Portico update by Microsoft that was released yesterday to AT&T and Rogers devices but not the rest of the Lumia Windows Phone 8 range unfortunately. Bit of a wait, but hopefully not too long until the update hits. -
I have recently had to fire my web designer who was using iWeb. Now I'm trying to figure out how to get the site to open in iWeb on my new MacBook Pro. Is there a way?
Firstly iWeb CAN'T IMPORT any kind of published html code as it has no import facility. You can however add html code, javascript and css by selecting the html snippet and placing it on your page the entering the code in here and clicking on Apply. You DO NOT create a shape as you say - you use the html snippet and place your code in there.
There are not really a lot of ways in which you can write code - if you want to enter small amounts of code, then you would use an ordinary text editor to do this such as Text Edit on a Mac or Text Wrangler. If you want to add code to iWeb like this, then you would either use the html snippet method in iWeb itself or you would have to publish the site to a local folder from iWeb and open the relevant html page with a text editor and add the additional code in this way and then publish. However, if he decided to add the code with a text editor, then you would have to upload the pages directly to the server using an ftp client - if you try to upload the site directly from iWeb, all the extra code will be overwritten.
As for checking whether the site was created using iWeb, all you need do is view the site in Safari and then click on View and then select View Source Code and it will tell you.
Even thoough extra code was added to the site and he might well have done this by publishing to a local folder and adding the code with a text editor, he should still have the domain file for the site too.
Ask again. I'm sure that for adding quick code, most would not want to use programmes such as Dreamweaver, but a simple text editor will suffice. As OT already said, if he claims that he does not have the domain.sites file, then try Flux 4 which is a web design programme and has full import facilities. At least this way, if he just gives you the published version of the site, you have some way of opening it.
You can download a free trial of Flux 4 and you can also purchase the full version from the Mac App Store if you decide you like it. -
Trying to figure out what's using my RAM
A couple of weeks ago I starting to notice that my memory was getting chewed up slowly until I'd hit around 20MB remaining. the only way that I could free up the space is through 3rd party memory utilities such as FreeMemory. It appears on further inspection memory appears to go inactive, but this isn't very healthy, yet very odd, so I'm trying to figure out if there's a memory leak somewhere.
Any help would be wonderful. Below is my Etracheck log. I've attempted to remove alll external hard drives and other devices connected via either thunderbolt and USB with no change. Rebooted a few times however the memory gets eaten right up again.
My initial thought was that it's somehow VMWare however my Windows 7 instance is running at a fixed rate, and even with the instance shut down, my computer would still eat up any available memory.
Thank you!
Hardware Information:
iMac (27-inch, Mid 2011)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
AMD Radeon HD 6970M - VRAM: 2048 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 19:6:22
Disk Information:
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (609.08 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information:
HP External HDD 2 TB
HP SimpleSave (disk8s1) /Volumes/HP SimpleSave: 2 TB (202.96 GB free)
Western Digital Ext HDD 1021 2 TB
WD (disk6s1) /Volumes/WD: 2 TB (683.89 GB free)
Initio WD20EARX-32PASB0 2 TB
EFI (disk2s1) <not mounted>: 209.7 MB
disk2s2 (disk2s2) <not mounted>: 2 TB
Boot OS X (disk2s3) <not mounted>: 134.2 MB
Initio WD15EARS-00Z5B1 1.5 TB
MUSIC (disk1s1) /Volumes/MUSIC: 1.5 TB (347.84 GB free)
Western Digital Ext HDD 1021 1 TB
Elements (disk5s1) /Volumes/Elements: 1 TB (119.86 GB free)
Seagate FreeAgent 500.11 GB
EFI (disk4s1) <not mounted>: 209.7 MB
FA (disk4s2) /Volumes/FA: 499.76 GB (350.5 GB free)
Western Digital My Passport 0748 1 TB
My Passport (disk7s1) /Volumes/My Passport: 1 TB (710.73 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPad
Brother MFC-495CW
Logitech USB Receiver
Logitech USB Receiver
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/hosts - Count: 30
Kernel Extensions:
com.kaspersky.kext.klif (3.0.3a40)
com.kaspersky.nke (1.6.3a13)
com.logmein.driver.LogMeInSoundDriver (1.0.0)
com.splashtop.driver.SRXDisplayCard (1.6 - SDK 10.7)
com.silex.driver.sxuptp (1.5.1)
com.splashtop.driver.SRXFrameBufferConnector (1.6 - SDK 10.7)
com.kaspersky.kext.kimul.44 (44)
com.kaspersky.kext.mark.1.0.5 (1.0.5)
com.regularrateandrhythm.driver.RowmoteIREmu (1.0)
com.tuxera.filesystems.tufsfs.fusefs_txantfs (2012.4.17)
com.vmware.kext.vmci (90.5.7)
com.vmware.kext.vsockets (90.5.7)
com.vmware.kext.vmnet (0133.15.45)
com.vmware.kext.vmx86 (0133.15.45)
com.vmware.kext.vmioplug.12.1.12 (12.1.12)
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.bjango.istatmenusdaemon.plist 3rd-Party support link
[System] com.disc-soft.DAEMONTools.PrivilegedHelper.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.kaspersky.kav.plist 3rd-Party support link
[System] com.logmein.logmeinserver.plist 3rd-Party support link
[System] com.logmein.raupdate.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.parallels.desktop.launchdaemon.plist 3rd-Party support link
[System] com.splashtop.streamer-daemon.plist 3rd-Party support link
[System] com.teamviewer.teamviewer_service.plist 3rd-Party support link
[System] com.timesoftware.timemachineeditor.backupd-auto.plist 3rd-Party support link
[System] org.macosforge.xquartz.privileged_startx.plist 3rd-Party support link
[System] xxx.qnation.PeerGuardian.kextload.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.Affinegy.InstaLANa.plist 3rd-Party support link
[System] com.bjango.istatmenusagent.plist 3rd-Party support link
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.kaspersky.kav.gui.plist 3rd-Party support link
[System] com.logmein.logmeingui.plist 3rd-Party support link
[System] com.logmein.logmeinguiagent.plist 3rd-Party support link
[System] com.logmein.logmeinguiagentatlogin.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.parallels.desktop.launch.plist 3rd-Party support link
[System] com.parallels.DesktopControlAgent.plist 3rd-Party support link
[System] com.parallels.vm.prl_pcproxy.plist 3rd-Party support link
[System] com.splashtop.streamer-for-root.plist 3rd-Party support link
[System] com.splashtop.streamer-for-user.plist 3rd-Party support link
[System] com.teamviewer.teamviewer.plist 3rd-Party support link
[System] com.teamviewer.teamviewer_desktop.plist 3rd-Party support link
[System] net.culater.SIMBL.Agent.plist 3rd-Party support link
[System] org.macosforge.xquartz.startx.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.eltima.Folx.Agent.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac.helperTool.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
[not loaded] com.valvesoftware.steamclean.plist 3rd-Party support link
[not loaded] ws.agile.1PasswordAgent.plist 3rd-Party support link
User Login Items:
Adium
Firefox
Thunderbird
Vidalia
[PC ~ Multi9] Football Manager 2010.iso
iTunesHelper
MagiCal
Connect360Helper
Kodak EasyShare Wireless Listener
GrowlHelperApp
Microsoft Database Daemon
Weather Vane
VMware Fusion Helper
Dropbox
Spotify
Octoshape
SIMBL Agent
iSkysoft Helper Compact
pCloud
OpenDNS Updater
smcFanControl
TSPrint Client
Rowmote Helper
Internet Plug-ins:
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
LogMeInSafari32: Version: 1.0.530 3rd-Party support link
googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 3rd-Party support link
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
LogMeInSafari64: Version: 1.0.530 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
NPTWCP: Version: (null) - SDK 10.5 3rd-Party support link
CitrixICAClientPlugIn: Version: 11.2.0 3rd-Party support link
Silverlight: Version: 5.1.20513.0 - SDK 10.6 3rd-Party support link
LogMeIn: Version: 1.0.530 3rd-Party support link
FolxNetscapePlugIn: Version: Unknown
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 3rd-Party support link
o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
SharePointBrowserPlugin: Version: 14.3.6 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 21 Outdated! Update
z: Version: (null) - SDK 10.5 3rd-Party support link
Safari Extensions:
Dashlane: Version: 2.3.2.52081
iTube Studio: Version: 4.1.0.2
Kaspersky URL Advisor: Version: 8.0.5
Virtual Keyboard: Version: 14.0
YouTube Downloader: Version: 4.8.0.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
TuneUp Visualizer: Version: 2.2.0 3rd-Party support link
AudioScrobbler: Version: 3.0.4 3rd-Party support link
User Internet Plug-ins:
Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 3rd-Party support link
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
FolxNetscapePlugIn: Version: Unknown
OctoshapeWeb: Version: 1.0 - SDK 10.8 3rd-Party support link
3rd Party Preference Panes:
Citrix Online Plug-in 3rd-Party support link
Connect360 3rd-Party support link
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Growl 3rd-Party support link
Java 3rd-Party support link
MacFUSE 3rd-Party support link
Perian 3rd-Party support link
Tuxera NTFS 3rd-Party support link
Old Applications:
Microsoft Language Register: Version: 14.3.6 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
/Users/[redacted]/Library/Application Support/Helper
iSkysoft Helper Compact: Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
Aimersoft Helper Compact: Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
PwnageTool: Version: 4.3.3 - SDK 10.4 3rd-Party support link
/Users/[redacted]/Desktop/iOS4 Jailbreaking/PwnageTool.app
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.6 - SDK 10.5 3rd-Party support link
DockPlistEdit: Version: 7.0 - SDK 10.5 3rd-Party support link
/Library/Parallels/Uninstaller/Parallels Hypervisor/DockPlistEdit.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.6 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.6 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Meteorologist: Version: 1.5.6 - SDK 10.4 3rd-Party support link
Lithium Core Admin: Version: 5.0.15 - SDK 10.5 3rd-Party support link
Microsoft Communicator: Version: 13.1.3 - SDK 10.5 3rd-Party support link
Lithium Console: Version: 5.0.15 - SDK 10.5 3rd-Party support link
SpotiMy: Version: 1.1 - SDK 10.0 3rd-Party support link
Rowmote Helper: Version: 3.4.1 - SDK 10.5 3rd-Party support link
iPhone Explorer: Version: 2.1.0.1 - SDK 10.0 3rd-Party support link
Data Rescue 3: Version: 3.2 - SDK 10.4 3rd-Party support link
Rivet: Version: 2.8.0 - SDK 10.5 3rd-Party support link
Remote Desktop Connection: Version: 2.1.2 - SDK 10.5 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
dynamiclinkmanager: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
dynamiclinkmediaserver: Version: 6.0.1 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
iSkysoft Helper Compact: Version: 2.2.5.6 - SDK 10.5 3rd-Party support link
/Applications/iSkysoft Helper Compact/iSkysoft Helper Compact.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Audacity: Version: 1.3.13.0 - SDK 10.4 3rd-Party support link
/Applications/Audacity/Audacity.app
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
SA Color Finesse 3 UI: Version: 3.0.6(275) - SDK 10.5 3rd-Party support link
/Applications/Adobe After Effects CS6/Plug-ins/Effects/Synthetic Aperture/(CF3 Support)/SA Color Finesse 3 UI.app
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 363.47 GB
Destinations:
Untitled [Local] (Last used)
Total size: 2
Total number of backups: 59
Oldest backup: 2013-12-15 08:32:21 +0000
Last backup: 2014-03-23 19:01:48 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 363.47 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
158% vmware-vmx
139% Adium
38% plugin-container
7% thunderbird
6% firefox
Top Processes by Memory:
3.55 GB vmware-vmx
1.01 GB firefox
410 MB thunderbird
262 MB kav
229 MB plugin-container
Virtual Memory Information:
1.03 GB Free RAM
5.20 GB Active RAM
5.07 GB Inactive RAM
4.44 GB Wired RAM
5.09 GB Page-ins
1.01 GB Page-outsYou have waaaaaay, waaaaaay too much software and "garbageware" installed on your Mac!
Plus, you are treating your Mac too, tooo much like a Windows PC!
Are you a former WindowsPC user?
You do not need all of this software crap and "garbageware" you have installed on your Mac.
How many applications do you run simultaneously in the background while working in another application?
With 16 GBs of RAM, you should not be experiencing any memory Page out issues. Yet, you have over a GB of memory Page outs!
You are, probably running tooo many applications at once. You need to cut back the amount of open applications that you have up and running concurrently OR install even MORE RAM!
Your year and model Mac can take up to 32 GBs of RAM.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
Unless you are running Kaspersky antivirus software under your Windows setup, completely uninstall this from OS X per instructions on the developer's website.
OS X does not need antivirus software. Antivirus software can slow down the normal operation of OS X and have adverse and negative effects on performance and operation of OS X.
Compleley uninstall CleanMyMac per the instructions on the developer's website.
http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2
Again, you have waaaaay toooo many user startup/login items!
You need to really, REALLY, look at these at determine what you need to have launch at startup or Login.
You really need to whittle this waaaay down!
All of these items launching at startup/login is causing a large part of your Mac slowdowns.
Add or remove automatic items
Choose Apple menu > System Preferences, then click Users & Groups.
Select your user account, then click Login Items.
Do one of the following:
Click Add below the list on the right, select an app, document, folder, or disk, then click Add.If you don’t want an item’s windows to be visible after login, select Hide. (Hide does not apply to servers, which always appear in the Finder after login.)
Select the name of the item you want to prevent from opening automatically, then click Delete below the list on the right.
Google software is ,currently, not 100% compatible/compliant with OS X Mavericks. Especially Google Chrome and Drive.
So, uninstall all Google software per the instructions on Google's website until Google posts an "official" fix/update for these.
If you do not like Apple's Safari Web browser, try using Mozilla Firefox, instead. Mozilla constantly updates FireFox and there is a new update available.
Also, Telestream Flip4Mac plugin is an issue on OS X Mavericks. If there is no Mavericks update for this plugin, then completely unistall this plugin per instructions on the Telestream website. Use the newest version of VLC player, instead.
Completely Uninstall MacFUSE. There hasn't been any updates for this in a couple of years and is outdated and incompatible with Mavericks. Uninstall per instructions on the developer's website, also.
You need to update all of your third party software if there are OS X Mavericks updates that can be applied.
You may need to,ACTUALLY, go to the third party developers' websites if there are no updates through the Mac App Store.
Update all of your Web browser Internet plugins, extensions and add ons, also.
Also, if you have any connected third party devices, like non-Apple keyboards, mice, drawing tablets, hubs, card readers, etc, you need to go to the device makers' websites' and update the drivers for these devices to OS X Mavericks compatible versions, if available, applicable and needed.
Good Luck to you! -
I am trying to figure out how I can transfer my library to my new 2014 honda accord that has an internal 16gb hard drive. The manual for the car says that it needs to be original CD's but I have purchased alot of the albums/songs I have from I tunes therefore not having the original CD. Can someone help me with this as I dont want to load each CD into the player to record and have some albums that I purchased off of I tunes that I would like to be on the hard drive.
Thanks Any Help is appreciated.If Honda says you need the original CDs, you need the original CDs.
-
I accidentally bought the HD version of a movie for my daughter's nano. you can't watch HD on a nano. So I'm trying to figure out how to re-download the SD version. This help screen makes it seem like you can just correct the problem and just "download" the lower version. But when I follow the steps, I basically get to where I'm just having to actually purchase the other version. Do I have to pay to get the lower quality version after I've already paid for the HD version?
When you purchase an HD movie or show, in most cases the SD copy can be downloaded from your purchases area in iTunes. On the main iTunes Store page, go to Purchases under the Quick Links and then select Movies or TV shows as appropraite. Click the "Not On This Computer" button. Uncheck the "Download HD when available" box and you should then see the SD copies of the movies/shows and be able to download them.
Note that with digital copies from a Blu-Ray or DVD, if it comes with an HD copy, you normally cannot get the SD copy as well and have to purchase it separately if you want it.
Regards.
Maybe you are looking for
-
Need help on Adobe Photoshop CS5 Classroom in a Book
Hi, I need to study the book but does anyone know what are the list of concepts, tools, and skills in lessons 1-3?
-
Good evening, I am having trouble sending meeting requests from my iPhone, iPad and Mac computer. If I send the request for 10am, the appointment is received on the blackberry and samsung as 9am (I have not tested other phones). I have tried all the
-
It says Message Trace data is stored for 90 days here: http://technet.microsoft.com/library/jj723162(v=exchg.150).aspx When running the MessageTrace report using the Office 365 Reporting Web Service it only returns the past 7 days, even though it say
-
I do not use Illustrator that often these days but I am NOW starting to use it with my Graphtec cutting machine to cut names out of flex to then heat press onto fabrics. My query is, when I am using the type tool, after clicking onto the page a symbo
-
hi , In my workflow..when ever quotation is created.(suppose USER1 has created quotation)...... Workflow starts and there is an activity with task and rule in task. The rule finds the responible agent and sends the work item to that ID (suppose USER