HT3529 I downloaded iOs 7 on my iphone 4 and now the typing is delayed 15 seconds.  How do I fix this?

I downloaded iOs 7 on my iphone 4 and now the typing is delayed 15 seconds.  How do I fix this?

Sounds like you have something running that is taking up quite a bit of your CPU power.  Try shutting off your apps and potentially shutting off your bluetooth and wifi?

Similar Messages

  • When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

    When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

    Glad you found the answer.  But something seems wrong.  FCP should be able to assign the scratch disk to your startup drive.  It's not advisable, but it should be possible.  You might want to try and figure out what's going on before what ever's going on cause other problems.

  • I've just updated to iOS 5.0.1 and now the ipad is not recognised, how do I correct this?, I've just updated to iOS 5.0.1 and now the ipad is not recognised, how do I correct this?

    I've stoped and restarted the AMDS but no change (this worked when I had the same problem with the iOS 5.0 upgrade), what should I do next?

    I had this symptom but adding +1 to telephone numbers nor the *228 reprogram worked. I found the solution in a kb article and documented the solution here:
    How to sync Contacts after iOS 5.0.1 update
    ..Mike . Silver Spring, Maryland, USA

  • My ipad 3rd gen is on ios 7.0.4 and its slow as ****....how do i fix this?

    My ipad 3rd gen is on ios 7.0.4 and its slow as ****....how do i fix this?also there these apple people are not upto releasing ios 7.1 soon...i ve seriously lost all my fun in using this ipad.....what should I do?its lagging a lot...thanks in advance.Sorry for my English....

    Hi Chinmaypaseband,
    Welcome to the Support Communities!
    iOS 7.1 was released on March 10.  Here is some information about it:
    iOS 7.1
    http://support.apple.com/kb/DL1732
    For general Wi-Fi troubleshooting, try the steps in this article:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628?viewlocale=en_US
    Cheers,
    - Judy

  • The volume control has disappeared from the music app on my iPhone and i can't play any music how do i fix this?

    The volume control has disappeared from the music app on my iPhone and i can't play any music how do i fix this?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.

  • I have recently updated my CC programs to the latest version and now all of my files wont open by default into their respective programs, only if I open the program and go to file open and open the file from there. How can I fix this?

    I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
    I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anyway

    On Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
    But there is a plugin for ID that makes this possible. Never tried it myself.
    https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

  • TS3274 i dropped my ipad and now i have a "green screen" how do i fix this?

    i dropped my ipad and now i have a "green screen" how do i fix this?

    If it's an iPad 2, it's old enough to be out of warranty. Courcoul's suggestion to trade it in for a new one is ok if you are in the market. If not and you want to take a risk - and possibly a big one at that - others have reported a pretty extreme solution to this problem. Slap it on the back.
    I know, I know. It's sounds crazy, but there are several threads here claiming it works.
    Here is just one of them. You can do a search to find others.

  • I upgraded my mac to os x mavericks and now I have no sidebars. How do I fix this?

    I upgraded my mac to os x mavericks and now I have no sidebars. How do I fix this?

    Open General preferences in System Preferences. Make you sidebar selection via the option buttons.

  • I lost my iphone and activated my number with an old phone. Problem is people with iphones are now sending me blank texts. How do I fix this?

    I had an iPhone 4s but left it on my car and drove off.  Now I have activated a temporary phone my mom had on hand (Lotus) while I save up for a new iPhone.
    Is there a list out there in cyber space somewhere that lists all the iPhone numbers because now people who have iPhones send me blank text messages?  I have been able to isolate this down to only happening when they send me an "iMessage" but I don`t understand why I keep getting them?  Even people I had never texted with before losing my phone are sending me these blank messages.  How do I fix this?

    If you registered you iPhone with Apple you may want to try unregistering it by:
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on ">" to the right of the phone listing
    Click "unregister"
    This may help unregister you iPhone with the iMessage server, allowing texts sent to you from iPhones to be sent as normal SMS/MMS rather than iMessages.

  • My Safari did updates and now it will not open. How do I fix this?

    My computer did updates about a week ago and ever since then the internet will not open. It says it downloaded safari 5.1.1, when I try to open safari it comes up with a message saying the community toolbar does not support the version I am using.
    How do I fix this so that I can have internet?

    This may help you What you can do if Safari quits unexpectedly

  • Installed FF4 and now my TouchPad no loner works, how do I fix this?

    I installed FF 4 on my Lenovo ThinkPad T61 and now my TouchPad & TouchPoint cannot be used to scroll web pages (they do however work on other programs). I installed the latest driver for the TouchPad & TouchPoint but it did not fix the problem. I also restarted FF in safe mode with Add-on disabled and this did not help either. I can scroll using the arrow key or with the curser, but it's VERY annoying not being able to use the TouchPad & TouchPoint. How can I fix this?

    Confirm that you have the latest drivers for the Spyder, 4.5.6. The release notes state that earlier releases had a problem with color cast on some systems. Then run the calibration again. If you continue to have problems, you may want to take this issue up with Datacolor technical support; it's possible that your calibrator is defective, or they may have tips.
    Regards.

  • Just did a sync and update after about a year and a half...all my contacts from the last 2 yrs are gone as well as texts. and an old email account and all the contacts are showing up. how can i fix this?

    Just did a sync on my phone after 2yrs. all my contacts are gone and so are the texts. also old contacts from a former email address are in there now. how can i fix this?

    you can't fix this bcz after 2 year u sync your mob now everything gone before and after the sync

  • My imessage was working for a few days and now it wont work please help how can i fix this

    my i message worked the first few days after i hooked it up and then it wouldnt work for a day at a time but now its not sending or receving at all and its been about a week how can i fix this??

    Make an appointment at the nearest Apple store and see what they can do for you. Some Apple Stores can replace the screens onsite so that may be an option.
    The damage will not be covered by warranty so you will have to pay to have the phone serviced or replaced entirely.
    ~Lyssa

  • HT5824 i dont know what happened but ALL my photos and videos from my computer just uploaded to my iphone and i have no memory left! how do i fix this?i think its the phot stream?

    ALL of my photos and videos have uploaded via icloud or photostream on my iphone now i have no memory left. how do i delete all these off my phone?

    Photo stream doesn't sync videos unless they are short videos added to a shared stream.  If not, you must have synced them to your phone or took them on the phone itself.
    Did you sync them to your phone using iTunes?  If not, are you running a Mac that is signed into your iCloud account and running iPhoto?

  • I removed my /Applications/Safari.app/Contents/Resources/.VideoCaptureFactory.* files and now Safari will not open. How do I fix this?

    Hi,
    In a stupid attempt to "fix" my computer, I removed my /Applications/Safari.app/Contents/Resources/.VideoCaptureFactory.* files (one was a .png and the other was a .xls).
    I followed these steps:
    Manual Removal Instructions
    1. Run the following command in Terminal:
    defaults read /Applications/Safari.app/Contents/Info LSEnvironment
    2. Take note of the value, DYLD_INSERT_LIBRARIES
    3. Proceed to step 8 if you got the following error message:
    "The domain/default pair of (/Applications/Safari.app/Contents/Info, LSEnvironment) does not exist"
    4. Otherwise, run the following command in Terminal:
    grep -a -o '__ldpath__[ -~]*' %path_obtained_in_step2%
    5. Take note of the value after "__ldpath__"
    6. Run the following commands in Terminal (first make sure there is only one entry, from step 2):
    sudo defaults delete /Applications/Safari.app/Contents/Info LSEnvironment
    sudo chmod 644 /Applications/Safari.app/Contents/Info.plist
    7. Delete the files obtained in steps 2 and 5
    8. Run the following command in Terminal:
    defaults read ~/.MacOSX/environment DYLD_INSERT_LIBRARIES
    9. Take note of the result. Your system is already clean of this variant if you got an error message similar to the following:
    "The domain/default pair of (/Users/joe/.MacOSX/environment, DYLD_INSERT_LIBRARIES) does not exist"
    Is there a way to update my db to not look for this or did I remove something crucial to the functioning of Safari? I feel like an idiot.
    Thanks for any help.
    Sincerely,
    Sterling MacNay

    You installed a variant of what’s commonly called the “Flashback” or “Fakeflash” trojan, although the names are obsolete.
    If you’re certain you know when that happened, and you back up with Time Machine or something similar, you can save yourself a lot of time by restoring your whole system from the most recent snapshot taken before it was infected. Then take Steps 7, 8, and 10 below.
    How can you tell when the infection took place? All you can be sure of is that you were infected some time before the problems started. You may have visited a blog that prompted you to install some kind of software, or a “certificate.” You entered your administrator password when prompted. If you remember doing that recently, mention it in a reply, but don’t post a link.
    If you don’t know when you were infected, there's no easy, reliable way to remove the malware, because it's constantly changing. There are differences of opinion on this site as to the best of course of action, so you should do your own research before deciding how to proceed.
    I suggest you take the following steps:
    1. Back up all data to at least two different devices, if you haven't already done so.
    2. Boot from your recovery partition (if running Mac OS X 10.7 or later) or your installation disc (if running an earlier version of the Mac OS), launch Disk Utility, and erase the startup volume. This action will destroy all data on the volume, so you must be sure of your backups.
    3. Install the Mac OS.
    4. Reboot and go through the initial setup process to create an account with the same name as your old one. Don’t import anything from your backups at this stage.
    5. If running Mac OS X 10.6.x or earlier, run Software Update. You may have to run it more than once to fully update your system.
    6. Restore the contents of the top-level subfolders of your home folder except “Library” from the most recent backup. The Library folder may contain components of the malware. It’s best not to restore anything from there. If you must do so, restore only files, not whole folders with all their contents, and only if (a) they’re visible in the Finder, and (b) you know what they are, and (c) they haven’t been altered. Don’t restore anything in the home subfolder Library/LaunchAgents, if it exists, or any hidden files or folders, no matter where they are.
    7. If you’re running Mac OS X 10.5.8 or earlier, launch Safari and select Safari ▹ Preferences… ▹ Security from the menu bar. Uncheck the box labeled Enable Java. Because of known bugs, Java in those OS versions is unsafe to use on the Internet. (Note: I’m not referring to JavaScript, which is unrelated to Java, despite the similar names.) If you’re running Mac OS 10.6.8 or later, you should still disable the Java web plugin unless you really need it. Few websites have legitimate Java content nowadays. If you encounter one that does, enable Java temporarily.
    8. Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Take this step only after you’ve secured your system in the preceding steps, not before.
    9. Reinstall your third-party software from fresh downloads or original media, not from backups which may be contaminated.
    10. If you use any third-party web browsers, disable Java in their preferences. As with step 7, this step is mandatory if you’re running any version of Mac OS X older than 10.6. Otherwise it’s optional, but recommended.

Maybe you are looking for

  • Photos look great edited in LR 3 but extremely grainy when printed

    I said I would take photos at a friends wedding and now I just want to cry. I edited raw photos in LR3 - they look great in LR. I export them to a folder and they still look great on a large screen. But then I sent them off to print. It wasn't so muc

  • My InDesign program is printing my placed images lighter than illustrator.

    I am trying to print a colour logo in Indesign with black type on my inkjet printer.  The colours are appearing fine on screen and so is the black but when I print everything is washed out.  I tried just printing a black box and it appears black on s

  • Consignment Issue Invoice

    Dear Friends, The user has created one sales order (401001) for the consignment issue for the total quantity of 8,888,165 lbs. After raising the invoice, the user found that the invoice has been created only for 626,695 lbs. In the document flow of t

  • Reading filenames

    Hello, I am making a program that requires me to read in all the filenames that are in a certain directory and output them into a file. I think i will be able to output them no problem, but how do I get the names of the files? thanks, evan

  • Help with Photoshop CS 5

    I hope someone can help me.  I have photoshop cs 5 extended and would like to save a file in a .png format.  But it does not give me that option . I have Photoshop 7 too, and there I do get the option to save a file in a png format. In the help, it s