HT3529 my iphone 5 apple logo keeps flashing

my iphone 5 apple logo keeps flashing

abj1953 wrote:
my iphone 5 apple logo keeps flashing
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup...  Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Similar Messages

  • My iPhone 4s apple logo keeps flashing.

    I have to have my iphone 4s connected to the wall or my computer in order for it to do anything. The apple logo just keeps flashing on and off and doesn't go to the home screen . My home button doesn't work so i can't reset it, should i just go to apple. Would it be a mother board problem, or battery problem ? thanks

    Hey Melrobb1!
    Here is an article that I believe will be helpful for this issue. Perform the steps suggested in the article as a step of normal troubleshooting for issues similar to this:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • My iPad mini keeps turning itself off and then the apple logo keeps flashing constantly, i have charged it fully and restored it many times. what can i do?

    My iPad mini keeps turning itself off and then the apple logo keeps flashing constantly, i have charged it fully and restored it many times. what can i do?

    If you have restored to factory settings and started as new, there is nothing more that you can do on your own. Make an appointment at an Apple Store and ask them for help. You might have a hardware problem and the Apple Store techs will be able to determine that.

  • Apple logo keeps flashing and i cant restart because power button is broken

    My apple logo keeps flashing on my phone for about 10 seconds at a time. I know most of you will tell me to hold the power and home button but the problem is my power buttons broken. Also, plugging it into my wall and laptop won't do anything. I'm not sure what else to try, any advice is appreciated.

    There really isn't anything to do.  You'll need to bring your phone to Apple for replacement.

  • Apple logo keep flashing every 5 seconds

    Why do my iphone 4 logo keep flashing and cannot be restored?  Tried many menthods but still it can't be restored. Please advise.
    Thanks!

    Hello pollyinmypocket,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Best of luck,
    Mario

  • I plugged my phone in to charge and the apple logo keeps flashing up what does this meen?

    i plugged my i phon einto charge and the apple logo keeps popping up and the phone wont come on, what does this meen?

    Hey alixwilliams,
    It sounds like you are experiencing a software issue with your iPhone that requires a restore. You might want to try the method for restoring your phone found in this article to help you address this issue:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht1808
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • HT201412 My iphone keeps repeating unclean shutdown.  Cant get to my screen to do anything. The apple logo keeps flashing on and off.  Can I restore or is phone done.

    I cant get my iphone to turn on. The apple logo goes on and off intermittently.  Avery small line of words stating error'unclean shutdown.  It ssms like it is frozen or locked.  Is there something I can do to restore my phone screen? I recently updated to IOS 6.

    What happens when you try to restore?

  • My iPod generation 5 was working fine then it turned it self off and it won't switch on or anything and when I put on charge the apple logo keeps flashing on and off. It

    Lastnight I was just playing away on my iPod and next thing it just went off, it was fully charged and everything. Now it won't come back on and when I plug it into the wall the apple logo just keeps flashing on and off. I have tried to reset it by pressing the on and off button and home button but nothing. How can I get it working again.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • HT201412 apple logo keeps flashing

    the apple logo on my iphone keeps flashing and its been doing it for two days after i tried to uptade it to ios6 ive tried everything and it still keeps f;ashing what do i do.

    Did you try to connect in recovery mode and restore again?
    iOS: Unable to update or restore
    Has there been modified software installed prior to the update?
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • My ipod wont turn on, it keeps dying even if i leave it in charge the whole night and then after it dies it wont turn on the apple logo keeps flashing on and off and it also doesnt let merestore

    My ipod touch 5th gen wont turn on. it keeps dying sometimes it would die even if it was in charge, once it dies it doesnt turn on it keeps flashingthe apple logo and so i put it to restore and while it was restoring it said that there was an error and that it couldnt restore my ipod so i took it out of chrage and put it back in and it showed that my ipod was dead so then after a while it turned on and it showed the connect to itunes sign i connexct it to itunes but itunes doesnt let me restore or update. so i took it out of the usb that was plugged to my laptop and it showed that it was charging but it was dead, i left it in chrage for 3 hours and i dont know what happend but now it completly wont turn on

    You said "while it was restoring it said that there was an error ".
    What was the wording of the error message?
    Also:
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    If you can’t charge your iPhone, iPad, or iPod touch
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Does the apple logo keeps flashing on and off while restoring

    My ipad fell in water and went blank i tried restoring it would show a hardware problem.I got that fixed but it kept showing not charging sign then i forgot my pasword and tried restoring it to the factory setting but mid way it said ur ipad cannot be restored but the restoring process kept going on with the apple icon flashin one too many times in between. please advise.

    Try and force iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Upgrade to ios 7 on my iphone 4s. apple logo keep coming up trying to off it. plug in the charger and can get it to off it

    cannot get the phone to off it. plug in the charger and it work

    I just encountered this problem for the first time and stumbled upon this forum to find a solution.  I played around with it a bit and it seems that if you slide your finger from the bottom up, you will come upon that new screen that will allow you to do various functions with your phone (put it in airport mode, lock, etc.), you can select your Airport from this screen and play your music wirelessly from your phone; at least this was my experience. Hope this helps!

  • Hello, my iphone 4 has just stopped working it has gone blank..i plugged it into my laptop and it the apple sign keeps flashing it wont connect to itunes either :/ HELP!!!

    hello, my iphone 4 has just stopped working it has gone blank..i plugged it into my laptop and it the apple sign keeps flashing it wont connect to itunes either :/ HELP!!!

    Try the following:
    1. Reset
    Hold the Sleep and Home button down until you see the Apple logo
    2. Restore:
    http://support.apple.com/kb/HT1414
    3. Recovery:
    http://support.apple.com/kb/HT1808

  • I restored my iPhone 5 to IOS 7.1 on computer and tried to restore from icloud back up. It says "restore completed" but Apple logo keeps popping up every 5 seconds. It restored only contacts and sms. I can access the phone but have to stop if logo pops

    I restored my iPhone 5 to IOS 7.1 on computer and tried to restore from icloud back up. It says "restore completed" but Apple logo keeps popping up every 5 seconds. It restored only contacts and sms. I can access the phone but have to stop if logo pops

    Hello khanhlinh98,
    I would recommend performing the following steps in order to stabilize your iPhone.
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see the battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • HT201263 I Have an iPhone 5 runnig ios 7.0.4. It wont start as the apple logo keeps on blinking when i connect to wall charger or itunes. I even tried to restore it but an error 21 is being displayed. Any one can help me in this situation

    I Have an iPhone 5 runnig ios 7.0.4. It wont start as the apple logo keeps on blinking when i connect to wall charger or itunes. I even tried to restore it but an error 21 is being displayed. Any one can help me in this situation

    Read http://support.apple.com/kb/ts3694#

Maybe you are looking for

  • Changing the column definition in a view

    Dear all, i have a problem in view , i searched first but i couldnt find any thing. assume i have two tables and they have one field with type number, i want to make a view, and in this view, i want to redefine this number field as follows : number(3

  • Pre-Populate AD Groups upon Provisioning of AD User

    I've been trying to figure out how to auto-populate groups in AD for users based on a single attribute in the OIM User Profile. For example, if a user's geographic code on the OIM User Profile is TX and he has an Administrator title, then I want that

  • Adding custom fields in QA32 header

    Need to add custom fields in QA32. So I have implemented exit  'QPL10004'  which is having function module exits for screen data processing and custom inclueds to add custom fields in table QALS. I have had added fields in header data, so the calling

  • IMac 20" Aluminium sound not working through headphones on Windows 7 32bit

    Okay, so here's my problem. I have Windows 7 Home Premium 32bit and after installing boot camp and all the updates and stuff my audio didn't work. So, I went to realtek and downloaded the driver that people said to. When I installed it normally, it d

  • HTMLDB_ITEM.CHECKBOX  p_checked_values Length 4000

    Hi, I am using the HTMLDB_ITEM.CHECKBOX and the values that are checked by default is dynamically generated. Once the length of p_checked values crosses 4000, I get the following error. ORA-01704: string literal too long Please suggest if there is a