HT3529 Problem in message box

I am facing a new problem in message box i.e, some messages are showing in list but while viewing them they are being blank & deleting... This issue is after updating iphone4 with iOS 6.0 please give solution

it's not working yaar. I'm getting one errror while using "this" instead of "null"

Similar Messages

I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

JackieMars71 I would recommend reviewing your installation log files to determine if there are any errors during the installation process. You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

Problems installing plug-ins (and even Adobe updates) to Photoshop CS5 Extended on a new Win7 64-bit laptop.Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document."

Problems installing plug-ins to Photoshop CS5 Extended on a new Win7 64-bit laptop. (Same CS5 and plug-ins installed OK several years ago on a Vista laptop. Now I'm just trying to migrate everything over to the new laptop.) Even some Adobe updates won't install. Instead, a message box pops up on the CS5 screen saying "could not complete your request because it is not the right kind of document." Any solution?

CS5's automatic update mechanism is broken, perhaps because it is no longer updated and can't cope with the newer ways of updating.
So this means you will have make a list of the updates that failed, go here: Product updates
and manually download/install from there.
Gene

"1 item" and pointed finger inside message box. Is there a fix for this problem?

When I'm in e-mail, I get a hand with the pointed finger and a message box saying "1 item". The hand and box follow my pointer around the screen but I can't open up any e-mails. The only way out of it is to go up to Hotmail on top, select it and them select "In-Box." This only occurs in Firefox. Internet Explorer works fine and I never have the problem.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Execute query and Message Box Problem!

Hi,
I have a procedure to built undo function :
declare
ls_row varchar2(55);
ls_item varchar2(55);
begin
go_block(:parameter.l_current_block);
ls_row := :m_form.rowid;
execute_query;
if ls_row is null then return; end if;
loop
exit when :m_form.rowid = ls_row;
exit when :system.last_record = 'TRUE';
next_record;
end loop;
end;
This procedure working fine.
When I have edit some data and want to undo, then I pressed undo button. It's always display the message box "Do you want to save change you have made?".
I don't know how to make this message box can't display and being the execute_query work directed.
It's urgent, please help!
Thanks,
Leny

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by lenyhu:
Hi,
I have a problem again........
If the item have a when-validate-item trigger. When I run undo function, how can I do to skip this validation and just do the undo function?
Leny <HR></BLOCKQUOTE>
set_item_property ( item_id, item_is_valid, property_true );
undo_function
set_item_property ( item_id, item_is_valid, property_false );
hope this helps.

I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is click event message box will not working correct

I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is button click event message box or popup window will not working correctly. Please any one suggest me the steps to overcome this not responding or slowness in the responding problem of Button click event.

Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
'''about:config'''
# In the address bar, type "about:config" (with no quotes), and press Enter.
# Click "I'll be careful, I promise"
# In the search bar, search for "javascript.enabled" (with no quotes).
# Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
To Re-enable JavaScript, repeat these steps.
'''Add-ons'''
You can alternatively install an add-on that lets you disable JavaScript, such as
*[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
*[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
Thank you and I hope this helps!

Timeout PJC - Problem exiting when Message box or LOV is displayed.

I'm trying to integrate the Timeout PJC into my Oracle Forms. During testing, I noticed that although the timeout expires and Form A displays an expiry message, Form B will not exit if a Message Box or LOV is present requiring a response by a user. Once the user responds and these windows are closed, the user is returned to Form A and the timeout works as expected.
All the code for the Timeout PJC including the Java Bean is in Form A. On Form
B, I'm using the WHEN-TIMER-EXPIRED, WHEN-WINDOW-ACTIVATED and
ON-ERROR triggers to handle the problem with the error message 41355
(Cannot navigate to Form ...) which works fine. Any suggestions will be greatly appreciated.

Does anyone have any suggestion to my question below?. Is there a way to exit a Form when the Timeout PJC expires and a Message Box or List of Value (LOV) requires a response by the user. I would like to exit the form and the application when there is no activity after a specified time but I'm having this issue. Thanks for you assistance.

Problem Installing Oracle Linux 6.3 - 'Disc not found message box'

I'm trying to install Oracle linux on a old laptop. Single disk drive.
I downloaded V33412-01Oracle Linux Release 6 Update 3 Boot iso image for x86_64 (64 bit)
burned it as an ISO image on a CD.
Inserted the CD,started the system, cd booted and the installation started.
Skipped the verify media (I verifed it during another installation try)
selected English
selected US
When prompted for installation method, I tried selecting 'LOCAL CD/DVD' since that's where my CD is at. I get a 'Disc not found message box'.
I've also tried to select the /dev/sda1, which the installation accepted, only to fail later saying it can't find the ISO image.
I also tried putting the ISO image and unzipping the contents of the file onto a USB stick and selcting this during the install - same error.
I tried putting V33413-01 onto the USB stick and selcting that - its too big to burn on a CD, that didn't work..
Any ideas here? Though this was a easy installation but I'm scratching my head as to how to continue?

Not very clearly - for me at least.
Not sure - and not sure where to find instructions on how to do this.
It mentions that you don't need the source CDs
Oracle Linux Release 6 Update 3 source DVD 1 V33413-01 3.1G
Oracle Linux Release 6 Update 3 source DVD 2 V33414-01 1.7G
Not sure what to do with these anyway.
Installation
To install Oracle Linux 6.3 from DVD media, follow the following steps:
1. Download the compressed binary DVD images
Download Oracle Linux 6.3 DVD from the Oracle Software Delivery Cloud.
You do not need to download source DVDs to install Oracle Linux.
2. Verify the downloaded media
Verify the downloaded file by comparing its sha1sum or md5sum with the published
sha1sum or md5sum.
3. Write the DVD image to DVD
Use your favorite cd burning software to write these images directly to DVD.
You should not simply copy the files onto the DVD. You must use a DVD burner
that can accept an ISO image as input, and which can create a bootable DVD
from it. To test if you have burned the images correctly, insert a burned
DVD and ensure that multiple files and directories are visible.
6. Insert the DVD, and boot
Insert the DVD into your system, boot from DVD, and follow the on-screen instructions
to deploy Oracle Linux!

Missing Message Box after Skin Copy in IC Agent

Hi,
I copied the default skin in a customer z-skin (and added a logo).
Everything works fine, even the company logo is visible.
Now I have the problem that for the role "IC Agent" all the three message boxes have disappeared and that behind the SAP logo, the "Interaction Center" is smaller then before.
Is this a problem in the process of the copy? Or is the mistake somewhere else?
Thanks for your help
Tim

Hi Tim,
We are facing exactly the same issue with our skin. we tried to copy 'NOVA' into a new custom skin and the three message boxes have disappeared.
Also we get a warning on UI when we use this new custom skin saying "Communication management software system is not configured".
Please can you extend help on this one. This is important for us.
Many Thanks
Priyanka

How to cancelling email submission after user clicks "yes/no" button of message box?

could some one tell me, how can i cancelling the submission event after one user clicks "yes/no" button of message box? The scenario is the following:
After data input in a dynamic form clicks the user send mail button. Before the email submit, the user has to decide going back to the form and validate the input or continuing to submit email.
In case of going back to validate input the submission event must not solve. So, how can i implemente it in java and/or form calc script?
Thanks so much for your help in advance and i am very glad to hearing from you soon!
Djinges

Hello,
The most easy way to solve your problem is to add two buttons, the first should be regular button and the second is submit by e-mail one. Set the
'presence' property of the second to 'hidden' and add to it your email address. To the first button on 'click' event add the script like this
form1.#subform[0].Button1::click - (JavaScript, client)
var answer = xfa.host.messageBox("Send e-mail?","e-mail",2,1);
if(answer==1){
EmailSubmitButton1.execEvent('click');
Hope this helps.

My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery." My question is: how to fix this?

My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery." My question is: Why is this happening and how do I fix it? (I'm losing battery power precipitously). Thanks in advance for any assistance with this question.

Thanks Kilted Tim, you solved the problem. I'm mightily impressed at the simplicity of the solution!
Jaded Kane

How to display a message box in a UIX JSP page?

I've a UIX JSP Application with BC4J developed with JDeveloper RC.
The problem is that when the user mistakes in the insertion/updating, I'd like to help him displaying a message box or a modal dialog window.
In particular, I've the following code:
<%@ page errorPage="errorpage.jsp" contentType="text/html;charset=WINDOWS-1252"%>
<%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %>
<%@ taglib uri="http://xmlns.oracle.com/uix/ui" prefix="uix" %>
<%@ taglib uri="http://xmlns.oracle.com/uix/ui/bc4j" prefix="bc4juix" %>
<%@ page import="oracle.jbo.JboException" %>
<%@ page import="CdssPackage.*" %>
<%-- Define Application Module and DataSource--%>
<%-- Define Application Module and DataSource--%>
<jbo:ApplicationModule configname="CdssPackage.CdssPackageModule.CdssPackageModuleLocal" id="app1" username="scott" password="tiger" releasemode="Stateful" />
<%
//Check the mandatory fields are not null
if ((cod_comm.compareTo("")==0) || (nome_ruolo.compareTo("")==0)){
throw new JboException(Errors.ERR_REQUIRED_FIELD);
//Now, the errorpage.jsp is displayed, while I'd like to display a message box or a modal dialog window
%>
How can I do it?
Thanks in advance.

Michele-
You can use javascript to send a message window in the http protocol.
Hope this helps,
Lynn
Java Tools Team

How can I desactivate an "-3 error" message box?

Hi everyone,
The last time I ran my program I got the error message : -3 at an unknown place (see .png).
I had already run it several times (for something like 40h each time) without any problem.
I have only connected and configured the error messages/boxes in some places in my program but not everywhere.
Could someone tell me if this kind of message can pop up when you haven't connected and configured all the messages/boxes? If so, I suppose I just need to configure all of them to avoid this kind of pop up?
Or could I get this kind of message anyway? If so, is there a way to desactivate this kind of pop up window message so that my program doesn't stop (although I understand there has been an error somewhere on the line)
Labview 10
Thanks,
User
Solved!
Go to Solution.
Attachments:
Forum error message.PNG ‏14 KB

Hey!
You can disable error handling dialog box. Tools > Options > Block Diagram
See attached picture!
Paul
Attachments:
disable error dialog.png ‏37 KB

My Message Box Code Is Not Doing What I want It to Do Visual Basic

Hi Good People
I have Written Code To Show A message box "Saying The Address Already Exists" If the Addresses are already in my Database But if the Address is not in My Database then It gets Saved To my Database. (All works Ok so Far)
The Problem I have is, I want to put an If statement inside another if statement.. Because On the Message box I also have A message Saying "Or are you Updating This Address" with yes and No Buttons. And If I chose No Button then Nothing should
happen But If I chose the yes button then three text boxes are enabled so I can make changes to the record if needed. ie change of price or change of Address.
When I change any Details on the Form and click save Nothing is Updated either in the datagridview or on the form. I must be missing code somewhere. Here is all the code i have ......
Public Class frm_AirportFares
Dim AirportFares As New AirportDataContext
Private Sub AirportFaresBindingNavigatorSaveItem_Click(sender As Object, e As EventArgs) _
Handles AirportFaresBindingNavigatorSaveItem.Click
Try
Dim Airport = From AirportFares In AirportFares.AirportFares _
Where AirportFares.PickupAddress = Me.tb_PickupAddress.Text _
AndAlso AirportFares.DropAddress = Me.tb_DropAddress.Text
If Not Airport.Count = 0 Then
MsgBox("The Address " & tb_PickupAddress.Text & " To " & tb_DropAddress.Text & " Already Exists" & vbCrLf & _
vbCrLf & "Or are you Updating this record", MsgBoxStyle.YesNo)
Dim res As MsgBoxResult
If res = MsgBoxResult.No Then
'Nothing Happens
MsgBox("Your Record Has NOT Been Altered")
Else
If res = MsgBoxResult.Yes Then
'Here I want to save any alteration made
Me.Validate()
Me.AirportFaresBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.BookingsDataSet)
Me.AirportFaresDataGridView.Update()
MsgBox("Fare Has Been Saved Successfully")
End If
End If
End If
Catch ex As Exception
End Try
End Sub
second Picture with Message box
Can anyone tell me what i have done wrong please
Kind Regards
Gary
Gary Simpson

You did not assign a value to the message box. You needed to do:
res = MsgBox(etc.)
However, it is preferred to use the MessageBox.Show() method rather than the legacy MsgBox() function. Notice the difference in the output of ans with each of these boxes.
Here is some sample code using both:
    Private Sub btnMsg_Click(sender As System.Object, e As System.EventArgs) Handles btnMsg.Click
        Dim ans As Integer      'can NOT declare as DialogResult
        ans = MsgBox("Did you pass the test?", MsgBoxStyle.YesNo, "Yes or No")
        If ans = DialogResult.Yes Then 'same as: If ans = 6
            MsgBox("OK", , ans.ToString)
        Else                '7 is same as No
            MsgBox("Failed", , ans.ToString)
        End If
    End Sub
    Private Sub btnMessage_Click(sender As System.Object, e As System.EventArgs) Handles btnMessage.Click
        Dim ans As DialogResult     'can also Dim ans As Integer
        ans = MessageBox.Show("Did you pass the test?", "Yes or No", MessageBoxButtons.YesNo)
        If ans = DialogResult.Yes Then 'same as: If ans = 6
            MessageBox.Show("OK", ans.ToString)
        Else
            MessageBox.Show("Failed", ans.ToString)
        End If
    End Sub
Solitaire

Error message boxes on duplicate drag in Flash CS5.5

Hi I wanted to report a problem I've been having with Flash CS5.5 on MacOS 10.5.8
When I drag an element (usually a line or shape) with the alt key pressed (in order to create a duplicate on the stage) sometimes I get a couple of message boxes appear that say "Panel x could not be created removing it from the list" where x is a number like 7 or 9. After I click through these the swatches panel appears in the middle of the screen.
This is quite annoying and holds me up as I have to click through these boxes & then close the swatches panel.
Hope you're able to address this error in future builds.
Cheers
-Tom

These are primarily user to user forums. USe the following if you have a bug to report:
Adobe - Wishlist & Bug Report
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

HT3529 Problem in message box

Similar Messages

Maybe you are looking for