HT3529 When I press the blue send button nothing happens!
When I press the blue send button nothing happen. What am I doing wrong?
Are you typing your message in the title line then tapping send? You don't need a title but you must have your message in the second line. Seems simple but it confused the heck out of me!
Similar Messages
-
My ipad will not swith on. It was working fine an hour earlier but when I press the power on button nothing happens. I have had it on charge just to be safe but no joy. This is a basic first version ipad. What options do I have?
Try a reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.
-
I updated my ipad to iOS 6 yesterday and it worked immediately after updating my ipad worked as it should. I left and came back in about 4 hours and have a black screen. When I press the on off button nothing happens. Help.
Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep/on/off and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
When I press the buy now button nothing happens. any ideas?,
When I press the buy now button nothing happens. any ideas?,
I do not know the answer but with itunes store which is essentially a website most errors seem to be on the Apple side. Report it to itunes store support
http://www.apple.com/emea/support/itunes/contact.html -
hello, my i phone 4 froze suddenly. before it did, the battery was 80% full. i called it from another phone and i can hear a ringing tone but my phone is completely dead. i pressed the operating button and nothing happens. also i tried connecting it to my mac but nothing happens. i also put it on the charger but nothing happens. any tips please?
Try this yet then.
How to reset your SMC >>
Run fsck.
1. Reboot/Startup holding your Command-S key down.
2. At the command line type the following and hit 'Return.'
/sbin/fsck -fy
3. After it has check/repaired your disk, type 'reboot' and hit 'Return' again. Unit should bootup normally.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
An Apple User Group -
I have uninstalled iTunes and everything related but still cannot download iTunes. When I click in "download iTunes" nothing happens at all. I have plenty of disk space and don't know what else it could be. My laptop is only 2 years old and is fully updated
Hi Kazwa,
Here is an article that has some information on downloading iTunes using Internet Explorer that may help:
iTunes: Downloading iTunes for Windows using Internet Explorer
http://support.apple.com/kb/TS3212
You may also want to try another browser.
You can also try these direct download links depending on your OS:
iTunes 11.0.4
http://support.apple.com/kb/dl1614
iTunes 11.0.4 for Windows 64
http://support.apple.com/kb/DL1615
Cheers!
- Ari -
My iPad will not boot up. When I press the on/off button, nothing black screen. Does anyone have a suggestion?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
How do I delete photos from my iPad? When I push the red delete button nothing happens.
How do I delete photos from my iPad? When I push the red delete button nothing happens.
Which photos are you trying to delete?
You should be able to delete photos in your Camera Roll that have been taken by your device or copied to it from emails, websites, etc.
Photos that were transferred to your device during a sync process are deleted by doing another sync but before syncing deselect those albums you no longer want. -
Hello all,
I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
What I have tried so far to no avail:
Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
Tried this: iPod nano (6th generation): Hardware troubleshooting
Changed the watch face to display.
Recharged the device overnight (without full discharge).
Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
Regards,Hey,
I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
Have you found any solution?
Bah, this is annoying.
//Gubbar -
When I pressed the new tab button, I use to land on google. I downloaded something that changed my new tab landing page. I now land on Yahoo. I hate yahoo!. How do I reset my landing page so I land on google when opening a new tab in Firefox.?
''New Tab button brings up Yahoo, want a different page''
First I would identify everything in about:config that refers to Yahoo.
Then I would remove everything about the Yahoo toolbar that is left that you don't want.
:https://support.mozilla.com/en-US/questions/850287
As a replacement for browser.tabs.loadOnNewTab (Bug [https://bugzilla.mozilla.org/show_bug.cgi?id=269664 269664]), you may have installed: New Tab Homepage [-- https://addons.mozilla.org/firefox/addon/777 --] (7KB), or NewTabURL [-- https://addons.mozilla.org/firefox/addon/2221 --] (47KB). -
When I press the add friend button on game center the screen turns black.
When I press the add friend button on game center the screen turns black and the
application froze.Does that keyboard have a '''Fn''' ''(Function)'' key? <br />
If so, hold the Fn key when you hit the F11 or F12 keys. -
I thought I used to be able to share contact information with another iphone user via messaging. Recently I tried sharing both contact information and "note", but have been able to do so. When I try touching the send button, nothing happens. Can anyone tell me what I'm doing wrong? Or, am I mistaken, is sharing via messaging not an option?
If I send via email from either iPhone or iPad it seems like it has sent but it doesn't. If I send via text message from iPhone it says message failed to send and won't send again no matter how many times I try
-
I have a iphone3GS. It could not be boot up. When i press the sleep/wake button, the apple logo appear and then disappear. The password login screen didnt' come on. When i tried to connect my phone to the itune on my laptop, there isnt this button that i can sync my phone with the laptop.
Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
http://support.apple.com/kb/HT1808
Hope this helps
- Greg -
Right now, I'm stuck in the settings, when I press the sleep/wake button or the home button it doesnt let me. But is not frozen or any thing just the buttons. help me please!!!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My Ipod touch is acting very annoying. When i press the sleep/wake button to turn it on it just turns on with the apple logo and stays there. The screen will then blink white occasionally and the process will start again. Once when it turned white. i pressed the power and home buttons at the same time and then the above process continued.
Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
http://support.apple.com/kb/HT1808
Hope this helps
- Greg
Maybe you are looking for
-
Good afternoon I installed a program from the console and displays an error with DNS, wanted resolve.conf file in the folder / etc and is not. I want to know if this is in another folder on Solaris 10 or What can I do to activate the DNS?
-
Log Exception Message in BPM Alert
Hi all I have a problem I am trying to solve. I have searched through the forum to try find pointers to a solution but haven't found anything yet. I am trying to process an exception branch in such a way that when it throws an alert, it includes in t
-
ECDSA KeyPairGenerator not available
Hello Everybody, I installed JDK 1.5 on my computer and I want to generate ECC key pairs. But when I tried run my utility whith this part of source code: KeyPairGenerator g = KeyPairGenerator.getInstance("ECDSA"); I got this exception: java.security.
-
Underlay section question/error?
Recently upgraded from CR 8.5 to 11.5.10.1263 and am experiencing the following on a report developed in CR 8.5, opened/run under CR XI. I have the Section Expert formatting Group Header 3 to Underlay following sections (box checked). For the first
-
BorderManager and Pix Firewall
Hello, Just implemented NSBS6.5 for a small bank with Pix firewall's inner IP address as my next router on hop.Was able to send mails out but could not receive inbound mails.Also the Bank's web site could no longer be assesible from within the bank b