HT3529 where are you smiley faces and symbols for texting on the iphone 5c?

Where are the smiley faces and symbols for texting?

On the emoji keyboard. Go to Settings>General>Keyboard>Add Keyboard and select emoji. Then you will have a small globe key near the number key on the left side of the keyboard. This will allow for selecting between the regular keyboard and the emoji keyboard.

Similar Messages

  • HT4528 getting popup need to review new terms and conditions for icloud on the iPhone 5s

    Getting a pop up when Iphone is activated that there are new icloud terms and conditions usually happens back to back and if on for a few minutes it pops back up.  Gives options to view terms or not now.  IF view now is selected it takes me to icloud settings but no way to view terms.  Need to figure out what is happening and how to clear from phone. Thanks in advance

    None of these things work for me, I'm so stuck!
    I updated to iOS7 this afternoon, before doing so I backed everything up and cleared off a bunch of photo's so I had space. Everything had been working fine.
    A few months ago I'd updated my apple ID to my new email address and it had worked fine. Now, my old email is my Apple ID and it won't let me rest it (my DOB is apparently wrong and there is no email address it's now connected to). My iTunes is connected to the correct account but the iCloud ID is still the wrong one.
    I've tried the 'find my friends' app and it gave me new T&C's but still, the old apple ID
    I've tried the restrictions, but that didn't work either
    I can't restore the phone until 'find my iPhone' is off, but I can't log in to do that
    IT'S LIKE A TERRIBLE CYCLE OF STUPIDNESS
    Can anyone suggest anything before I thrrow this stupid phone at the wall??

  • I opened iPhoto and it opened as if i just bought the computer. Where are all my photos and how do I get them back?

    I opened iPhoto and it opened as if I just bought the computer. Where are all my photos and how do I get them back? Luckily for the most part, I backed up photos on my flash drive, but I had just imported dozens of pictures from my phone. I reopen iPhoto soon after and the prompt asking how I would like to start iPhoto and all came up. I selected what brought me to the iPhoto I open up to every day only without any pictures.

    Are you in the correct account that contains the iPhoto Library?
    Did you ever move your iPhoto Library to an external drive?  If so, and you disconnect this drive, iPhoto will create a new blank one in the pictures folder.
    Check your computer to see if the "iPhoto Library" was accidently moved to the trash.
    If you still can't locate your images, launch finder, and select "all images" in the source column.  This will display all images on your computer.  Be carefull not to delete, move or modify the images you see in this manner, as it will cause issues with good iPhoto Libraries, however it may help us locate where the images are.
    Once you locate an image, click it once, then in the top menu bar, select "view / show path".  This will display it's location along the bottom of the finder window.
    Once you know where the image is, this should help you launch iPhoto to the correct library.

  • Smg123 where are you?

    smg123 where are you?
    I have a question related to post:
    http://forum.java.sun.com/thread.jsp?forum=31&thread=347231
    Was the dll ever completed and is it available?
    I know smg123 changed usernames last year because of password problems...but I haven't seen that username (smg123NewAndImproved) since December.

    although i still would like to see if that dll was ever made, I was able to do what I needed on my own, creating a shortcut in windows from java.

  • @ Nokia - where are you?

    OK, so as this is the official Nokia Support Discussions forum I'm wondering  where is the input from Nokia addressing all the many, many complaints from disgruntled owners of Nokia devices after this screwed-up Belle 'update'?

    Even if I'm not as satisfied with Belle (yet) as with Anna or previous Eseries platforms, I don't think it's fair to complain so much and blame Nokia for Belle, being "horrible", "non-user friendly", "step backward" and other negative adverbs.
    Belle's been out for 2 weeks and getting used to the new UI takes some time. Some may like it immediately (I do), some need some time, others don't like it. There will always be people complaining. These same people will "not buy Nokia ever again" and will rather buy iPhone. Well, let's wait for a week and they'll login to the Apple's discussion forum asking "how is it possible that my XY app doesn't sync with my WZ software" or "this is much easier to do with Nokia, hey Apple, where are you guys?". Finally, "I overpayed this iStuff and expected it to work. I'll never buy an iPhone again.". That's life.
    Think about - it's a nice gesture from Nokia to offer a FREE upgrade to Belle. It was OUR decision to upgrade, Nokia didn't made us to do it. Perhaps it would be wiser to make Belle payable (couple of euros, make it 20). THEN people should read the specs, what it features and decide if it fulfills the expectations. Making a formal complaint (reclamation) would be reasonable since you payed for it. And Nokia would benefit $$ and could actually pay the SW engineers from this income. But it was for free.
    Personally, I like the interface and overall performance - it's smooth(er), battery life is extended, it's easier to control the BT, 3G, Wifi as some examples. I realized some bugs but am sure they'll fix them. I'm annoyed about Wifi bug, absence of remaining characters in SMS messages, but I think I'll survive.
    I'm sure "Nokia" is following our discussions but releasing fixes every week is not even possible, reasonable nor feasible. Take time, get a buglist not only from 100 non-satisfied users but from larger pool of users and focus on the most important ones. These phones must work in Germany, California, Hongkong, Christchurch, Novosibirsk, Tahiti, Patagonia,... different languages, fonts, mobile network properties, operators -- you know what I mean?

  • Where do you accept terms and conditions on iphone?

    Where do you accept terms and conditions on iphone after adding billing information? 

    Hey natedaniels07,
    Thanks for the question. I understand you are having issues accepting the Terms & Conditions. If you have not already done so, you may want to restart your iPhone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If you are able to access the home screen, make sure cookies are not blocked and private browsing is turned off in Settings > Safari (you can also take this opportunity to Clear Cookies and Data):
    Safari settings - iPhone User Guide
    http://help.apple.com/iphone/7/#/iph3d7aa74dc
    Thanks,
    Matt M.

  • Where do you store documents and passwords on Ipad?

    where do you store documents and passwords on Ipad?

    Usually on the iPad, documents are associated with a particular app, which has its storage area for documents. A good Swiss Army Knife for docs is GoodReader.
    Do a search in the iTunes App Store and you will find scores of password apps.

  • I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use.  I can't see where it is in use and have tried to reboot the computer to no avail.

    I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use.  I can't see where it is in use and have tried to reboot the computer to no avail.  I can delete other files but several XLS files are giving me this message.

    You said it was a network drive.  So is someone else on the network using that same file or may have have left with excel still accessing it on their system?

  • I have a problem with your app store, always I want to update a new app, I want to know what Schiffer and novelty app! Most of my applications are in English, and they write what the improvement and renewal are written in English, and I do not speak the

    Hi
    I have a problem with your app store, always I want to update a new app, I want to know what Schiffer and novelty app! Most of my applications are in English, and they write what the improvement and renewal are written in English, and I do not speak the language! I try to copy the text, color (gray) is not successful, the variance can it, so we can copy the text and translate?
    I thank you for your help, it can help to humanize

    You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
    and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

  • Where can you download NAM 5.1 for windows7?

    Where can you download NAM 5.1 for windows7? it seems that i cannot find it, the ones on the web are all for Linux,
    thanks,
    Han

    Hi,
    Do you mean NAM for Network Analysis Module? As that is a module/appaliance which requires a specialized designed hardware and cannot be installed on Softwares like for Windows/Linux.
    NAM is a Hardware module/appliance that monitors and analyzes the traffic coming/going from network devices. Currently, there are multiple variations of the NAM, software and hardware, such as the NME-NAM for the Branch Integrated Services Routers (ISRs), NAM-1/NAM-2 for the Cisco Catalyst® 6500 Series Switches, and Cisco NAM 2200 appliances. Also, there is Cisco NAM Virtual Blade supported on the Cisco WAVE-574 and WAE-674 appliances.
    For more details please check :
    Cisco Network Analysis Module (NAM) Deployment Guide
    Network Analysis Module (NAM) Products
    Let me know if I did not understood the issue properly and you meant somthing else.
    -Thanks

  • I had purchased Pages, Keynote and Numbers for MacPro from the App store. My computer crashed and I had to reinstall everything and they are not appearing in my Purchased. Please help.

    I had purchased Pages, Keynote and Numbers for MacPro from the App store. My computer crashed and I had to reinstall everything and they are not appearing in my Purchased. Please help.

    You should be able to go > App Store > App store (menu) > store > view my account > sign in.    Where do you vary after following this point.   In between ID summary and Settings should be a section marked iTunes in the cloud and directly below but within that section, the message we are seeking.
    I'm not doubting you, just don't see why you have this problem. 

  • There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report

    When run as a batch program, (currently this is the case), or withT-Code ZJPVCS303 the selection screen is unchanged (except for additional sales area above)
    - When run as T-Code ZJPVCS303_UL (UL stands for Upload) the selection screen is changed.  The unix file option is no longer available, and the user is able to upload a local file (in the same format as the current unix file, but tab delimited) to the program for processing.
    Requirements:
    There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report.
    ->When ZJPVCS303 Transaction is executed, the file is uploaded from the Application
      server to SAP R/3. The selection screen parameters would be:
      Logical Filename:
      Sales Organization:
      Distribution Channel:
      Division:
    ->When ZJPVCS303_US Transaction is executed, the file is uploaded from the Presentation Server
      to SAP R/3. When this transaction is executed, it should not have the 'Logical
      Filename' parameter anymore on the selection-screen. Instead it should only have
      Local File name on the presentation server:
      Sales Organization:
      Distribution Channel:
      Division:
        The same thing is applicable for the other transaction ZJPVCS303. When transaction ZJPVCS303
    is executed, it should not have the 'Local Filename' parameter anymore on the selection-screen. Instead it should only have
    Logical Filename:
    Sales Organization:
    Distribution Channel:
    Division:
    So how should I make these parameters invisible depending on the transaction codes execution.
    I have an idea of using MODIF ID, LOOPING AT SCREEN...MODIFY SCREEN.
    I have an idea of using SY-TCODE.
    EX:
    AT SELECTION-SCREEN OUTPUT.
    IF SY-TCODE = 'ZJPVCS303'.
    LOOP AT SCREEN.
    IF SCREEN-GROUPID = 'GRP'.
       SCREEN-INPUT   = 0.
       SCREEN-INVISIBLE = 1.
       MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ELSEIF SY-TCODE = 'ZJPVCS303_US'.
    LOOP AT SCREEN.
    IF .....
    ENDLOOP.
    ENDIF.
    ENDIF.
    But I am not able to get the output which I require. Please help me out.

    Hello Rani
    Basically the transaction determines whether upload starts from application server (AS) or presentation server (PC). Thus, you will have the following parameter:
    PARAMETERS:
      p_as_fil          TYPE filename   MODIF ID unx,  " e.g. Unix server
      p_pc_fil          TYPE filename   MODIF ID wnd.  " e.g. Windows PC
    AT SELECTION-SCREEN OUTPUT.
      CASE syst-tcode.
    *   transaction(s) for upload from server (AS)
        WHEN 'ZJPVCS303.
          LOOP AT screen.
            IF ( screen-group1 = 'UNX' ).
              screen-input = 0.
              screen-invisible = 1.
              MODIFY screen.
            ENDIF.
          ENDLOOP.
    *   transaction(s) for upload from local PC (PC)
        WHEN 'ZJPVCS303_US.
          LOOP AT screen.
            IF ( screen-group1 = 'WND' ).
              screen-input = 0.
              screen-invisible = 1.
              MODIFY screen.
            ENDIF.
          ENDLOOP.
       WHEN others.
       ENDCASE.
    Regards
      Uwe

  • How can I move all my bookmarks from different Firefox profiles into one area to organize them and then place them into the different Firefox profiles?

    How can I move all my bookmarks from different Firefox profiles (would like to move whole bookmark folders at once if possible) into one area to organize them and then place them into the different Firefox profiles? This is all under one window user account, I am using windows 8.1. Even if you have information on how to do it on a different windows, it may still be helpful. Thanks for any input you have.

    Just a note about the difference between these two things:
    * "export" and "import" use an ancient HTML document format that all browsers can understand. When you import bookmarks, Firefox may place them into an Imported Bookmarks folder, or into Unsorted Bookmarks. This does not displace existing bookmarks, and Firefox does not automatically remove duplicates.
    * "backup" and "restore" use a more comprehensive JSON data file, which contains extra information about your bookmarks (such as tags) not contained in the traditional export file. HOWEVER, a restore completely replaces all existing bookmarks, so the restore feature cannot be used to merge in a set of additional bookmarks.
    Related support articles:
    * [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
    * [[Import Bookmarks from a HTML file]]
    * [[Restore bookmarks from backup or move them to another computer]]
    Some users find the disk-based Windows Favorites folder a convenient way to organize bookmarks. If you do, too, and you do not need to preserve tags on your bookmarks, you could export each profile's bookmarks to HTML and import them all into IE11. Organize them in the Windows Favorites folder, then export from IE11 to HTML and import that file into each Firefox profile. See: [http://windows.microsoft.com/en-us/internet-explorer/add-view-organize-favorites].

  • As we are having a problem explicit with Adobe Reader 11.0.07, we are interested in news and dates for coming updates to Adobe Reader. Can I find information about this anywhere ?

    As we are having a problem explicit with Adobe Reader 11.0.07, we are interested in news and dates for coming updates to Adobe Reader. Can I find information about this anywhere ?

    Hello Claus,
    you could have a look here: http://helpx.adobe.com/security/products/flash-player/apsb14-13.html  and in german language http://www.chip.de/downloads/Adobe-Reader_12998358.html
    In all These cases Google could be "your friend".
    Hans-Günter

  • HT3576 I have many apps where i must swipe down and it constantly brings down the notification screen. Is there anyway to disable this or activate it a different way because this really bugs me.

    I have many apps where i must swipe down and it constantly brings down the notification screen. Is there anyway to disable this or activate it a different way because this really bugs me.

    I don't have that problem.  Perhaps I touch the screen lower when I wipe down?  I don't know for sure but there's got to be some difference in the way that we wipe down.  you might wish to do some experimenting.

Maybe you are looking for

  • An Open Letter To Apple Regarding iTunes' Lack Of Simple Functionality

    Why, when you select, "Convert Selection To AAC," does it not do what it says? It certainly does not convert anything! Instead, it COPIES the .mp3 file and redundantly places it BACK into the library creating an abundance of duplicates (along with th

  • Networking troubles

    I have a Thinkpad 390x, and I'm having trouble getting it connected to the internet so I can download xfce through pacman. I've tried changing some settings in rc.conf (changed it to dhcp, and also changed my gateway). There is an ethernet port on th

  • Hanging Ornaments effects

    Hi, could some, how to make this effect in Motion?. http://vimeo.com/16285916 Thanks

  • Change hostname to registered DNS domain name in URL

    Hi all, We have just new install of IAS 1.0.2.1 Now server is responding on the hostname fe: http://myserver. We have registered name of the domain fe. www.ourdomain.com and we want to apply it for our application server. I know that I have to change

  • Is there way to get lock holder by row id?

    My problem is that sometimes some rows get locked for long time and I don't know who holds lock. Ideally I want query which takes table_name and primary key value and outputs lock holder information. (e.g sql text, how long query is being running, et