HT3546 wifi search indicates my connection is not secure
Wifi search says my connection is not secure
Just to be sure we understand, are you referring to the AirPort icon on the OS X menu bar shows that your current Wi-Fi network does not have a lock icon next to it ... which would indicate that it is an open network?
Similar Messages
-
Wifi says unable to connect, will not connect to any connections.
Wifi says unable to connect, will not connect to any connections. I cannot connect to any WiFi. Using iOS 6.0.1
The links provided work for iPod and iPhone!
Products Affected
iPad, iPhone, iPod touch, iTunes
You'll have to visit an Apple Store next to your place to get it looked at or contact Apple to get it serviced.
Apple - Support - iPod - Repair pricing -
Any suggestions please on how to recover connection of ipad2 to Vizio wifi? (it worked fine in the last few months but the connection no longer exist although other laptops continue to have wifi connection to the same Vizio router.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Ok So I have windows 8.1 with Direct Access Client and it works fine when I am able to check and uncheck proxy settings - which is a bit of a pain and seems unnecessary (I hope). If I take the laptop to a Starbucks I get the error that the proxy server is
not responding so it never redirects for me to "accept" the rules.
If I uncheck my proxy settings it then redirects and connects to their internet wifi and off I go - DA connects and all is well.
I am using a GPO to configure the proxy settings as shown (all options are greyed out for the users)Hi,
Your problem is a classic one when using that kind of proxy settings, unfortunately.
To solve this without the need of user interaction, there are two solutions that will sort this out for you. In your case, if you want to use your corporate connection for internet traffic even over da, I'd opt for alternative 1 or 2 depending on what you are
trying to achieve.
1. WPAD (Web Proxy Auto Discovery protocol http://en.wikipedia.org/wiki/Web_Proxy_Autodiscovery_Protocol) - it actually uses the Automatic browser configuration checkbox on your client and looks for the file wpad.dat on a specific web server that you Pointout
with either dns-record called wpad or DHCP option 252.
2. Auto configuration script (pac script http://en.wikipedia.org/wiki/Proxy_auto-config) - uses the same kind of file as above. The difference is that you get the possiblity, like you want in your scenario to target what users that should get the script.
See this below article for more details on the options you have.
http://technet.microsoft.com/en-us/library/dd361918.aspx
http://techlib.barracuda.com/display/WSFLEXv41/How+to+Configure+Proxy+Settings+Using+Group+Policy+Management
Let us know if you need further assistance!
/Johan
MCT | MCSE: Private Cloud/Server, Desktop Infrastructure -
When I than starting IE the connection will starting en is oké.
You should actually be using Flash 10.3 (11.2 is insecure).[[Flash 11.3 doesn't load video in Firefox#w_solution-2-downgrade-flash|Solution 2: Downgrade Flash]].
Also, is there a reason you are using Firefox ESR? It's mean for organizations, and doesn't include all the security and stability fixes that Firefox latest (15.0.1) has. -
I have 2 ipod touch 3rd generation. Cannot connect to my wifi. One will connect on and off to my neighbor's unsecure wifi but neither will connect to my secured wifi. All my wireless computers connect plus my Ipad connects. They did connect at one time but haven't used them for anything but audio books which connect through Itunes on my computer. It shows my secured network name. When I originally connected them it was another rather with other security but since then I have bought new equipment. My Ipad and my printers just automatically connect. I have put in the Ip information plus but still no luck.
Try :
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
the gmail account is not connecting. The serrver repeorts like this way the connection is not secured some one is temparing the gmail account so it is not connecting
If you got that Java update from anywhere but Oracle's web site, it's almost a certainty you installed a Trojan. If that's the case, there's no telling what it does. Could be a keylogger, back door, etc.
Beyond that, yes, Java is so full of holes Swiss Cheese is envious. Unless there's some trusted site you can't use without having Java on, turn it off and leave it off.
Note that JavaScript has nothing to do with Java. Leave JavaScript on. -
My IPad connects with my hotel wifi, but does not indicate that it is a secure wifi, even though it requires a password to access - no lock symbol appears against the wifi network, hence no password request, hence no internet access - help. My collegue who also has an Ipad can access the same wifi with ease, so it must be something to do with the settings on my machine, although checking the two machines, there appears to be no difference in the settings.
My experience with hotel wifi is that it's an open, and unsecured, connection, but unless you agree to their terms on a launch page, you can't go any further or connect. Sometimes I need to force safari to come up and even make it go to a page, to trigger the auto load of the 'agree to our terms' page.
Unless your machine is work provided so maybe could be blocked from unsecured net access? -
why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router. i go and check over the detail of the network i connected, over the ip address and subnet mask have the numbers, but over the DNS and router don't have any number...isit the problem???? i can online at any other place but just my home cant...y????
Hey confuddled_chica!
Try the steps in the article below to troubleshoot this issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
I have a MacBookPro 5.5 and an iPad 2 32GB 3G; both items are pretty recent.
Today I tried connecting them via blootooth. MBP states "pairing success" (only after NUMEROUS attempts!!!) whereas the iPad seems to be still searching and indicates the MBP as "not connected". That over and over.
Also, the iPad does not seem to recognize ANY bluetooth device in the house (they ARE discoverable since my MBP DOES "see" them) like, for instance, my mini-Mac.
Any help would be appreciated; (I hope the problem lies NOT in the bluetooth antenna, in other words not in hardware.)
P.S. The MBP seems fine since it DID connect to Mac-mini.Hello:
Was the iPad paired with another device? If so, you need to "unpair" it from the previous device. Bluetooth devices may be connected with only one thing at a time.
Barry -
My MBA indicates my connection is timing out. My wifi on other laptops work in the house. Diagnostics indicate wifi settings failed, network settings failed, ISP failed, Internet failed, and server failed. What can I do?
Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC). -
I have an Ipad1 and an Ipad2. The Ipad1 cannot connect to my wifi and indicates the password is incorrect even though I am using the same password for the Ipad2??
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
HP Pavilion Entertainment PC: WiFi works, however, hard wired connection does not work.
Internet via WiFi works, however, hard wired connection does not work.
My software indicates my hardware is working properly.
However, if I connect another computer to the cable I am using, it connects to the internet without a problem.
And, if I connect my comupter to another cable that works with another computer, my computer still does not connect to the internet.
HP Pavilion dv9700 Notebook PC
32-bit Operating System
Windows Vista Home Premium Service Pack 2It could be that the touch pad is broken on the inside and the contact area for the one button is either broken, blocked with an object or the cable going to the mother board is not inserted correctly into the mother board connector. I think in any case the case will have to come off and someone look for physical/connection problems. It doesn't sound like a software problem but there is always a chance.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster. -
WiFi turning off when Ethernet connected, and not coming back on
Since about last Tuesday (possibly when I updated to Safari 7.0.6), whenever I connect my MacBook Air (2011) to ethernet, my WiFi turns off. When I disconnect the ethernet, the WiFi does not turn back on, which makes this an annoying problem. If I try to manually turn it on while Ethernet is still connected, it does the scanning animation a few times, and then turns back off. Without the ethernet, once WiFi is turned back on, it works just fine. I'm using both the Apple USB to Ethernet adapter and a StarTech Thunderbolt hub with Gigabit ethernet, and this happens with both. Everything is up to date, and the only change that coincided with this new behavior is Safari, but I don't remember if I updated it before of after the problem appeared, and I may not have noticed the problem for a few days as I don't often use my mac away from a wired connection.
Is this a known problem? Any known solution? When I search for it, all I find are people looking for ways to make the WiFi automatically toggle opposite the Ethernet, no one complaining that it's happening on its own.Why are you turning cellular data off when you get home? If you have wifi at home, it will connect to the phone. Then, once you leave home and get out of range of the wifi, cellular data should connect automatically, you wouldn't need to turn it back on. Turning wifi off is really not necessary unless you are using it as a battery saving feature. I leave my wifi turned on all the time, as well as cellular data, and my battery lasts for quite a long time.
-
On 3G we cannot send Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine. We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this.Contact whomever supports the email account and get the correct Outgoing email server settings from them.
Maybe you are looking for
-
It was working fine and I put all the video together. I exited, and added a folder to my computer for sound files, and when I opened Premiere again, it no longer worked. It had worked fine for a while and now it stopped. Any idea how I can fix it?
-
How to protect web application from piracy?
I m looking for solution to protect Web application from piracy. I want my application run on web server for which it is built, & it musn't run on any other web server. how can i protect my web application from piracy?. Our .Net applications we prote
-
My daughter has topped up her iTunes account with vouchers for Xmas, she has gone to use them and it has asked for her security questions. This is where the problems starts, she has forgotten the answers! After a few tantrums from her.... and me I do
-
App Store Quits Immediately when trying to open. Recently updated to 10.9.2
When trying to open the App Store on my mac, it immediately shows this. I recently updated to Mavericks 10.9.2 but had no immediate issue. This is an office computer and our IT guy decided to change some accounts and sharing but I am not exactly sure
-
I just bought a new Macbook, my friend has an older macbook. When I try to add her to my buddy list (which was from my AIM) she pops up...then is gone. I also cannot not do a video chat with her. What should I do?