HT3625 is there an adaptor for splitting this port for in/out use?

Where can I get an adaptor to split the mini sound out port for input use?

<http://www.gefen.com/kvm/product.jsp?prod_id=1198>

Similar Messages

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

Xperia z 1 - what is this port for?

anyone have an idea what is this port for (in the red circle)?
Solved!
Go to Solution.

Indeed
http://userguide.sonymobile.com/referrer.php?region=global-en&product=xperia-z1#!Phone-overview---C6...
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?

can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud? in apple tv 3 and 2?
That i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive, i dont want to see then whit the streaming and icloud, or used my laptop o pc for access de movies and stuff.
i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
if i can´t connect a external hard drive, wich others media players divices you know that can see itunes movies?
¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
lo que no quiero es usar la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
y de no poderse conectar que otros dispositivos media pleyer conoces para ver peliculas de itunes en la tv?

Welcome to the Apple Community.
can i connect a external hard drive to apple tv 3 generation
Unfortunately not.

HT5622 Hi, I can't use my apple ID even when down loading free apps there's a prompt saying this Id has not been use in iTunes . What do I need to accomplish? Thanks

Hi, why can't I use my apple ID even downloading free apps there's a prompt message saying " this ID has not been use to iTunes" what should i do?

That usually means that your payment information is incomplete. Even if you want to download free apps, unless you were able to select "None" as your payment option when you created the ID, you still have to enter a credit card.
There is a very specific way that you have to create an Apple ID if you don't want to use a credit card and I am guessing that is what you wanted to do originally, but you didn't do it correctly. The instructions are in this kb article.
http://support.apple.com/kb/HT2534

HT1311 recieved company Iphone 5 back from an employee.... the screen says iphone is disabled connect to itunes. Ive done that with no success. Is there any way to restore this phone for use again

received company iphone 5 back and the screen says iphone is disabled connect to itunes.... I've done that with no success. is there any way to re-enable this phone??

Put it is Recovery Mode then Restore it in iTunes; http://support.apple.com/kb/HT1808?viewlocale=en_US&locale=en_US

Project Server 2010 - Once individual settings are changed is there any way to save this down for each person

A timesheet submitter sets certain filters and "group by", the timesheet is then sorted according to those filters and groups. Once time sheet is saved & Submitted the filters/groups are changed back to the default for any subsequent time
reporting periods. Is there any way to predetermine the Filter=No filter and Group by=Project for all timeperiods.

For specific users not possible, however if you know many people use Timesheet in a specific way you might want to consider generic timesheet view which users can choose.
Hrishi Deshpande Senior Consultant

My mom has an 8 year old imac the kind with the white plastic rectangular housing. It has system 10.4.1. Is there any way to upgrade this? She can't use gmail any more

Is it possible to upgrade this system so my mom can have a modern browser?

We need more details to full yexplore the options. "*Eight yeras old" is very close to hte change from PowerPC to Intel processors. If she has the PowerPC, her options are limited; if Intel she has many more options.
Frr a start, please have her do "About this Mac" from her Apple menu (left end of menubar). The resulting window will describe the processor (second red arrow in the images
here):
Find out which she has and what speed (in mHz or Ghz)--that will be a big help for the Helpers!

When clicking CTRL+Link my new tab opens in the background window, instead of the foreground window I'm using. Is there a way to make this work the way it used to, where the new tab always opens in whatever window I was currently using?

I use a web based software for work. I go to a web page listing all employees as links (Window A). When I click an employee link a new window opens (Window B). Window B contains links, i.e. Add Client, Change Address, Change Phone Number, Change Name, Upload Photo, etc... When I hold CTRL and left click the links in Window B, the new tab opens in Window A. I don't understand why this has changed, as I've been using this method to open new tabs in my current window in both of the previous versions of Firefox.

That didn't work, but thank you very much for the offer of help. I had already tried that option.
To give you an example of what I'm speaking, I found this page that recreates the scenario.
1. Goto [http://www.kirupa.com/developer/mx/centered_popup.htm http://www.kirupa.com/developer/mx/centered_popup.htm]
2. Click the GO in the center of the box on their page (This creates a pop-up window with links to other programming pages)
3. CTRL+left click any of those links. The page opens in the background/original window, not the pop up window where you are currently working. And, with your solution takes me back to that window and the new tab.

Are there any security risks in opening ports for IChat AV?

Hi all,
I'm trying to get the network admin on a primarily Windows network to open the ports needed to get iChat AV working, but he is saying it's dangerous to have those ports open, not knowing what kind of effects there would be on a Windows network.
I am the only Mac user there so as you can see it poses a considerable problem.
Any help or advice or assurance from network admins to confirm that it is OK to open those ports would be of great help.
Thanks in advance.
AW

Andru08:
Don't expect your network admin to open any ports. He won't want to put his job on the line for you, nor should you expect him to.
You MAY be able to route iChatAV over a VPN, although I am still unsuccessful in doing so. I have found that iChatAV works over AIM servers when both source and target are inside the corporate LAN, even though the call registration and setup is initially managed off-net at AOL and Apple (i.e., AOL login and SNATMAP and all that stuff). Theoretically, it would seem like if the outside machine had VPN with the appropriate certificates issued by your network admin (e.g., your home machine if you were wanting to be able to talk work-to-home), the outside machine would act no different than if it was on the corporate LAN.
In real life, I still haven't gotten my home machine to communicate successfully over VPN to/from work, although I can ftp, afp, telnet, vnc, ssh, imap, smtp, etc., with no problem whatsoever over VPN. Just can't ichat over VPN. So, like me, you're probably SOL until a future version of iChat solves the VPN issue, if that is ever even explored by Apple.
In the interim, you may just have to have your work go with yahoo messenger or msn messenger on PCs to AV conference to remote offices -- we use something like that at my work for AV conferencing and it traverses VPN just fine to/from our remote offices -- from user desktop/laptop to user desktop/laptop -- just don't know exactly which package we use or how to set it up on Wintel boxes, though, ...coz' I'm a Mac guy. I suppose I could find out for you, though, if you were interested in a Windoze solution...
If any readers out there have actually gotten iChatAV to work over a VPN, boy, do I (and probably Andru08, too) want to talk to you!

There is example of reading USB port for Labview 6.0

I need examples of reading USB port

There aren't any examples for using the USB port as a very high-speed serial port. What are you trying to communicate with?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

HT3702 Please refund confirmation issue with Creation TM for iPhone, this app for iPad what app I've already bought and paid for, please check the amount of 14.99 €, Thx, Jordan Sent from cockney rebel iPad.

Please, stopped purchase ...

No one here can do anything.
We are all itunes users just like you.
Click Contact Us at the bottom of the page to contact Apple.

Hi I am a keen photographer and I have just bought you SD card reader for ipad. This works well but was winding if there is an app that I can view the images on the SD card full screen without having to import them to the iPad or is there a way to do thi

Hi
I am a keen photographer and I have just bought you SD card reader for ipad. This works well but was winding if there is an app that I can view the images on the SD card full screen without having to import them to the iPad or is there a way to do this on the iPad
The reason for buy this was for when I was out and about to get a better view off my images.
I have a iPad 2 16gb
Hope you can help!
Thanks

A couple of weeks ago, (after reading a review in TUAW) I bought a wireless hub/ SD card reader called RAVPower. its app comes with a built in viewer, so you can load it up, and see the pics full screen.

Error : There was a problem reading this document (109).

hello, i have a lot of PDF Files that become corrupted ! i dont know why
and i receive this error message when i open the pdf file:
" There was an error processing a page. There was a problem reading this document (109)."
im using adobe acrobat 8 prof. also acrobat reader.
please can any one help me to solve this big problem.

When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice.

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1: Is there any way of fixing this? I've tried

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
Question 2 (related):
This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
Thanks for reading this.
el7

Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7

HT3625 is there an adaptor for splitting this port for in/out use?

Similar Messages

Maybe you are looking for