HT3669 after updating lost network connection to my HP6310

An Apple HP Driver Update came out on Jan 10 2013 after installing the update I can no longer find my printer on the network (HP Officejet 6310 All In One). I know it's an older printer but it still works worked just fine. Can anyone tell me how to fix this? I can plug in the USB and it works but that's not practical with a laptop.

Similar Messages

Fascinate lost network connection after last Froyo update.

Anyone know how to fix this issue. After updating to the knew froyo upate last month my sons phone lost network connection and won't connect. It doesn't even show up in the settings for him to be able to connect. He can still make calls and connect but nothing data wise. Plus he still gets missed calls so that update never worked for him either. Please help and thanks.

I understand how frustrating this must be. My personal device had this problem and I found a solution that worked for me. Hopefully it will work for you as well.
1. Put the device in Airplane mode (hold power button and select airplane mode)
2. Wait 3 minutes for changes to take effect. You should see the airplane icon in the notification bar as well as the airplane lock screen.
3. Power the device off and wait 15 seconds.
4. Power the device on. Once sense loads, turn airplane mode off.
5. In the settings>Wireless & Networks Menu, check the box entitled "Mobile Network"
6. Everything should re-provision and data should be restored.
If the steps above do not resolve you issue you may want to try a master reset. Resetting the phone deletes all data, including downloaded applications, and resets the phone back to its initial state—the state before you turned on the phone for the first time.
Important: Make sure to back up important data you have on the phone before you reset your device.
Master Reset:
From the home screen, touch Menu
Touch Settings
Touch SD & phone storage
Touch Factory data reset
Tap Reset phone
Tap Erase everything
Reset may take anywhere from 1 - 10 minutes for reset and restart depending on amount of data on device.
I hope this information has been helpful.

Lost network connection after standby on Satellite P200

Hi
Laptop Satellite P200
OS VISTA 32
When I stop working with laptop I usually close monitor and when next time open laptop computer lost network connection.
Then I have to renew IP config and internet start working.
Does anybody know why and how to avoid this?
End I still want to use standby options.
Tnx for any idea
Sandi

Hi
In your case I recommend updating the BIOS and to enable the option Wake up on LAN in BIOS and in the Vista.
In Vista you can enable this in device manager -> LAN card properties -> Advanced tab
Additionally a LAN driver update would be advisable.

Lost network connection HELP HELP HELP

hi there i have big problem and i see it in first time from 5 years the problem is i upgrade to ios8 and after i complete the last step when he ask me to chosse backup i select the last one and the last one isbefor just one dayfrom the software that mean the backup from IOS7 after it i wait to restoring setting for i cloud then its appear to me massage that i lost network connection
and i tried more than 3 wifi connection and diffrent connection and the same problems
please help i looked in google and in internet for this problem and i didnt see any solution and apple didnt give any solution for this just say u have to connect to good network and plug the phone to ac power and i do these things and the same problems
Last back up in 17/9/2014
backup without problems

is there a problem with this link of mine...hv already done half of it now....wat do u say...
or shud i stop it and try urs....
http://appldnld.apple.com/iPhone4/041-9618.20111012.Zxb22/iPad2,1_5.0_9A334_Rest ore.ipsw

Removed ip access-list & lost network connectivity

An access-list was removed to edit and replace. Once the access-list was removed we lost network connectivity to the remote router. This list is an extensive one. But when we remove on other remote routers network connectivity remained. Can anyone tell me why? Is this a typical of access-list, and good practice is to wait until after business hours?

No problem.
I am sure that we have all had experiences of looking at things we have written, or questions answered, and realized that what we wrote was not quite what we were thinking as we created it.
Your main point is well taken that it is good practice to remove the access-group before removing and changing the content of access lists.
Sometimes I take a slightly different approach: I will build a new version of the access list using a different number (if I am changing access list 101, I may create list 102) which is the modified version of the list. I then change the access-group to reference the new version of the list. This may have a couple of advantages including the fact that the interface is always protected by some access list. Also it makes backing out changes easier if we discover that there was some flaw in our list modification.
HTH
Rick

Lost network connectivity to LOM

Hi,
We lost network connectivity to the LOM interface card. Does someone know if there is any way to restart the LOM remotely? I have access to the server by ssh. Server is a SunFire X4200

Hi.
Not sure that is possible.
Try read docs about ipmitool
Regards.

Chat Windows are closed on lost network connection

Hi,
Lync seems to behave a little bit differently from the Communicator regarding lost network connectivity.
As soon as Lync looses the connection to the server (e.g. by switching from LAN to WLAN) it logs off and
closes all chat windows - which is the main annoyance.
Can this behaviour be changed somehow so chat windows stay open and their content isn't lost?
Due to legal restrictions automatic saving of chat history is disabled - so that's no alternative to access the lost chats.
Any help/ideas appreciated.

Hi,GGerlan,
Unfortunately,As soon as Lync looses the connection to the server (e.g. by switching from LAN to WLAN) it logs off and
closes all chat windows this is by desgin,however you can check the conversation history when you switch from Contacts windows to Conversation windows in Lync client control panel and then click on the contacts to open the conversation windows
with missed conversation history.See below screenshot
Also if you deployed Exchange and you can check the conversation history in your outlook conversation history folder.
B/R
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

App says "Lost network connection, restart app"

my banking app comes up with "Lost network connection. Please tap home below and restart app"
I've tapped home twice, slide up the app and tried again - no luck.
Please help.

This issue can most likely be solved by contacting the developer of the app. That information in is the information about the app in the App Store.

Indesign Lost network connection of open database

good day
The Indesign is stopping with this error.
Lost network connection of open database
How to solve this problem?
Message was edited by: jcnet

Hi, I discovered in (Win 7 & 8 I assume) that if you go into your network adapter settings and click 'Configure' then go to the 'Power Management' menu there is an option to 'Allow the computer to turn off this device to save power'. I unchecked this and now no more crashing with the network connection lost error. Not sure it will work for everyone but might be the solution for some.

Lost Network Connection | Safari & iMail | AppleTalk & TCP/IP O.K.

Lost Network Connection | Safari & iMail | AppleTalk & TCP/IP O.K.
Well ... all of a sudden my iMail and Safari will not connect to the internet.
I can see other Macs on the network.
I can use the same iMail account settings on other Mac's O.K. and other Mac's can browse the internet O.K.
So it's a sudden local Mac problem, not a network or SMTP thing.
Any ideas anyone?
Has Safari or iMail suddenly broken and one effects the other?

Turns out the 'node' on the hub had failed completely, ethernet cable was OK.

Lost network connection after SW update

First time poster, relative newbie to Mac. I blindly updated to 10.4.11 and then found that my Mini had no network connection, yet my Ministack external FW HD and WinXP (thru BootCamp) will still connect wirelessly to my Westel router which has not been touched throughout this ordeal. My network is still shown and even offered to me for use during boot, but fails to connect. I have thrown every switch I can find in sys prefs to no avail. I have been asked for a WEP password, but security is switched off (in prefs and router), and I never used a PW before. I've spent hours Googling this topic, but can't find an exact match to my situation. I don't have the Mac knowledge to undo the update, or even know if it can be done. I can't understand how the bootable external HD can share the connection, but the "host" computer can't use it. Gotta be a setting wrong somewhere, eh? Please help.

A warm welcome to the forums!
Tons of similar posts, but not too many with the same cause fix.
If you haven't done regular maintenence like Disk validate/repair, Permissions fixes, etc, ete.
Then you Might give a try with Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.

Lost network connection after update

I waited a little long to update (~4 months) and am paying the price. The recent update broke X as well as my network connection (and who knows what else!). When I type ls /sys/class/net/, all I get is lo@. I'm a little rusty with Arch as I was really really busy with school. Do you have any suggestions for fixing this? Here is my rc.conf if it helps:
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="NO"
HARDWARECLOCK="UTC"
TIMEZONE="US/EASTERN"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
MODULES=()
UDEV_TIMEOUT=30
USEDMRAID="NO"
USEBTRFS="NO"
USELVM="NO"
hostname="srv"
interface=
address=
netmask=
gateway=
NETWORK_PERSIST="no"
DAEMONS=(hwclock syslog-ng network netfs crond gpm bitlbee dbus sshd)
Anything else I should post? Thanks for your help!

I was on vacation for a week, but now I'm back.
kandrews wrote:
Unfortunately, I cannot paste in these directories because it appears that usb is completely shot as well and I don't have a floppy drive (nor a floppy for that matter). At least, I believe so because I stuck in a stick and ran:
dmesg | tail
and didn't see anything about a usb being registered by the system.
Neither ifconfig or ip are installed. So that is also a considerable issue. Is all hope lost other than getting a live CD of ubuntu, spending a day copying files off of the hard drive and reinstalling?
Sorry, I must have been really tired when I typed this. Both programs (ifconfig, and ip) are in /sbin/. I'm betting I tried 'sudo su' and they weren't on the path and being out of it, I assumed the wrong thing. I'm going to try and mount a usb again to see if I messed that up as well...
I still don't have an eth1 or eth0. But maybe all hope is not lost.
Update:
No device nodes are created in /dev/ for usb drives, and my computer won't even power them unless I do it at boot. I also noticed that my keyboard doesn't work at all during grub.
ewaller wrote:Does the kernel referenced in the output of uname -a have a corresponding directory in /lib/modules ??
I am wondering if the kernel on the boot partition somehow did not get upgraded when we moved up to 2.6.2939
Yeah it does. So no luck there.
Last edited by kandrews (2011-06-24 16:44:41)

TS1398 After updating to iOS 7 my iphone 5 won't show any wifi networks or connect to any wifi even after resetting the network connections. HELP!

After updating my iphone 5 to iOS 7 my phone won't show any wifi networks or connect to any. I reset the network connections and still nothing.

I Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
IT shoulldnt erase everything, bt it might, so back up just in case
should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer

Satellite Pro U400 - Lost network connection after suspend

I have a Toshiba Dynadock. My network is connect directly in dynadock.
When suspend my Satellite Pro U400 and after restart for continue working I lost my network connection. Then I shutdown my computer and disconnect/connect Dynadock I can continue working.
What's the problem?
Version software Dynadock is 2.0

Hi
I see you have switched from Vista to XP.
First of all I recommend updating the BIOS.
As Im not mistaken you should find a newer BIOS version on the Toshiba European driver page.
Then you have to update the Win XP to the latest state!
The XP should be up to date and all service packs, patches and MS fixes should be installed in your notebook.
Then access the device manager and mark in every USB root hub you have to disable the option called Allow the computer to turn off this device to save power
You can find this option in properties -> Power management tab

Lost Network Connections after installing new version of "Access Connection"

Few days ago, I downloaded through Lenovo System Update, the latest “Access Connections” for my X60. Since then unfortunately I lost all my network connections (i.e.: Wi-Fi and Ethernet connection) to the laptop. Can anybody help me restoring my connections?
I tried to Roll Back the Driver for 3945ABG but to no avail.
Any help will be appreciated.
Thinkpad X60
Windows XP Prof
Garokay

garokay, welcome to the forum,
if I understand your problem correctly, nothing showing in network connections, please have a look at the following link to an MS tip, it may hold the solution.
How to troubleshoot missing network connections icons in Windows Server 2003 and in Windows XP
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

HT3669 after updating lost network connection to my HP6310

Similar Messages

Maybe you are looking for