HT3669 Epson printer driver update for 10.8.5

Apple lists "software available" to update my Epson Artisan 50 printer driver to version 9.0. However, when I do an Apple software update the printer is not listed and does not update. Epson website says all updates must be done through Apple. I just recently got a new iMac with Mountain Lion and switched the printer from my old 10.4 iMac. It no longer prints colors accurately so after going through all the standard "fixes" with Epson I hoped a driver update would help. Any ideas?

sorry - it is HP Photosmart D110a. the HP website says that there is no additional software other than the Apple update:
"With the release of OS X 10.8 Mountain Lion, HP is providing updated print drivers and software for your printer. These updates are available through Apple Software Update . You do not need to download a driver from HP to use your printer with Mountain Lion."
source:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03379337&cc=us&dlc=en&lc=en &os=219&product=4023246&sw_lang=
What functionality is available in the HP driver update through Apple Software Update?
Depending on the printer functionality , one or more of the following software components might be included in the HP driver update for Mountain Lion:
HP print driver
HP fax driver
HP Utility
HP scanning files compatible with Apple’s Image Capture and Preview applications

Similar Messages

Problem with Latest Epson Printer Driver Update

I installed the Epson printer driver update that came out today, but it made absolutely no difference. My Epson printer is still using a the same old Epson driver plus Gutenprint. There is no other option. I don't get it. What's the point of installing the update if the printer is still stuck with Gutenprint? My printer (Epson Stylus Photo R340) is supported according to Apple's list.

alansky1 wrote:
Thanks for that tip, John. I found the "Epson SP R340 series" driver by searching for it as you suggested.
Happy to help Alan.
HOWEVER, I cannot print with this driver. I get the following error message when I try to print:
Error: Library/Printers/EPSON/InketPrinter2/Filter/rastertoescpll.app/Contents/MacOS/r astertoescpll failed
This seems common with the Epson drivers, there are several posts here with that problem. Some users have had success deleting the printer from Print & Fax Prefs and adding it again using the Epson (non-Gutenprint) driver. Others have had to delete the <hard drive>/Library/Printers/EPSON and /Library/Caches/Epson folders, re-download the update, then re-add the printer.
I would try the first one first since it's the easiest and you already have the update installed. If that doesn't work, the second should.
Hope this helps.

Epson Printer Driver Update 2.18 and Stylus Photo 1400

My Mac Mini was unable to communicate with my Epson Stylus Photo 1400 printer, after installing the recent Epson Printer Driver Update 2.18. I am running Mac OS 10.7.5. Reinstalling the original driver from the Epson CD got me back on track, but, a test print from the installer did not work without additional software from Apple's servers. Avoid Update 2.18, if you are using similar equipment.

Since updating to EPSON Printer Software Update 2.18, I have not been able to print to my EPSON Stylus DX6000 (under OS X 10.6.8 Snow Leopard). The printer dialog box says
Error:/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpll.app/Contents/ MacOs/rastertoescpll failed
Using Time Machine, I restored rastertoescpll.app from a time before I upgraded to the 2.18 drivers, but that didn't work. I then restored the entire EPSON folder from
/Library/Printers/
from a time before I upgraded to the 2.18 drivers, and that still didn't work.
I was not able to find the Update 2.17 on the Apple site, but I was able to find it on the www.techspot.com site.
I downloaded EPSON Printer Software Update 2.17 from
http://www.techspot.com/drivers/driver/file/information/16158/
This downloaded EPSONPrinterDrivers2.17.dmg
I dragged the EPSON folder to the Trash, and emptied the Trash. I then ran the installer for the 2.17 drivers. After switching the printer off and on again, I was finally able to print.

Epson print driver update

Running S L.
When installing accidentally updated Epson print drivers.
Does anyone know of how to remove this update - as now use Canon printer.

For some reason the +Epson Printer Driver Update+ and +HP Printer Driver Update+ seem to be 'sticky' in the Software Update list under Snow Leopard. They often remain in the list even after you install them.
When you run Software Update, just uncheck them so you don't re-install them.
And BTW, turn off automatic software updates. Do them manually & selectively.

Software Update printer driver update for HP causes an extra page to print that just has "2345X" printed on it.

A few days ago, Software Update showed a printer driver update for HP so I installed it. Now, after everything that I print, I get an extra page that just has "2345X" printed on it. I tried reinstalling the driver update but still get the extra page. Anyone know how to get stop this extra pgae from printing?

Hello charliemun,
What I suggest is to reset the print system, click the link below to proceed:
http://support.apple.com/kb/HT1341
Once you have reset the print system please make sure you are selecting the HP Driver and not the Airprint driver (see picture below)
Please let me know if this has resolved the error of the extra page with the numbers on it, or if you require more assistance.
Thanks,
**HevnLghHP**
I work on behalf of HP

Epson Printer Driver Update 2.3.1

Software Update just informed me that this update is available; for now I've chosen to ignore it because a) my AIO printer functions flawlessly and b) I thought I'd read that the new update tends to result in problems.
Has anyone installed it and experienced any problems?

Barbara Daniels1 wrote:
Has anyone installed it and experienced any problems?
see this thread: http://discussions.apple.com/message.jspa?messageID=11477461#11477461.
JGG

Installed Epson printer driver from two places..

I recently upgraded to a new MacBook and Snow Leopard. I use an Epson printer & scanner, and an HP all-in-one at work. I didn't realize that 10.6.2 had built-in drivers and installed the Epson and HP drivers & software from the company websites (not apple.com). Then I saw the December Epson printer driver update on apple.com and downloaded that...
Do I now have a bunch of repeat installs?
Thanks!

Hello Elise:
Welcome to Apple discussions.
Do I now have a bunch of repeat installs?
Short answer - maybe.
If the printers are working properly, I would not be concerned. If they are not, you could do a "find" (include system files in the search) and see what you have. You could also reinstall OS X 10.6 over your current system and then run software update. I would not do that (time involved) unless you are having problems.
Barry

Epson Perfection 2400 Scanner issue with Epson Print Driver 2.4.1 Update

After the Epson Print Driver 2.4.1 update, my scanner quit working with Image
Capture, which hangs during the overview scan. The scanner makes a pass over
the document, but Image Capture just sits for a while saying "Overview Scan..."
and then fails with a generic error message.
I tried the suggestion in [11993273|http://discussions.apple.com/thread.jspa?messageID=11993273&#11993273 ], but that did not work for me.
Any other ideas?

Thank's for the suggestion, but no help.
It is not straight-forward to uninstall the driver because Apple installer
does not offer an uninstall option. I resorted to
sudo find /Library -iname "epson" -print -exec mv {} ~/Desktop/epson \;
in the terminal. Reboot. Ran EPSONPrinterDrivers.pkg. Ran Disk Utility's
Repair Permissions. Reboot. Added scanner back in the System Preferences.
Opened Image Capture, the overview scan started and a few minutes later
*Scanner reported and error*
An error occured during scanning.

10.7.5, MacBook Pro Why can't I update many things including my Epson printer driver?

10.7.5, MacBook Pro Why can't I update many things including my Epson printer driver?

Not sure. I'd have to be sitting in front of it to tell what is really going on. Do you have a valid internet connection?
Make a note of the updates then go to the Apple Download website and download one or two of them and then try to install them.
You have to do a search for them.
http://support.apple.com/downloads/

Epson Printer Driver/Apple Update Conflict?

The Apple Epson Driver 2.15 update (Snow Leopard) was in conflict with the installed Epson Printer Driver on Epson WF-2530 causing a permanent printing failure. Epson reported that "their staff was working with Apple Staff" to eliminate the conflict. Epson Technicians warned not to install 2.15 or I would lose printing capability again. Recently an Apple Epson Driver download was announced (2.15.1 @30.9 MB). Does that eliminate the problem? Should it be downloaded?

If I were in your position I would not rush to download the new update. Presumably it was intended to address the conflict, but if you restored your printer to operating condition and it is now working acceptably, I'd be inclined to let others be the guinea pigs.
Determining the reason for the update will be difficult or impossible. Apple generally provides a brief, though not necessarily complete, list of problems OS X updates are intended to address, but such information is not generally provided for printer driver updates: http://support.apple.com/kb/DL1398
You might try an Epson user support site.

I installed the Epson Printer Software Update 2.15 and now I get a rastertoespll crash whenever I try to print

I installed the Epson Printer Software Update that appeared in 'Software Update"' this morning and since then I get an error :
Process:
rastertoescpII [47217]
Path:
/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII
Identifier:
rastertoescpII
Version:
Code Type:
X86-64 (Native)
Parent Process: cupsd [15]
Date/Time:
2013-08-09 11:30:46.469 -0400
OS Version:
Mac OS X 10.6.8 (10K549)
Report Version: 6
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
whenever I try to print anything. I tried repairing permissions and downloaded the update manually from Apple and ran with the same results. I am running OS X 10.6.8 on a 2.53 GHz Intel Core 2 Duo Mac mini and printing to an Epson WorkForce 630

Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
Reinstall the driver directly from Epson's website. If you are still having problems after the reinstall, you should contact Epson tech support for a solution and/or work-a-round.

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

Epson printer software update 2.14 killed my printer

On Mac OS X 10.7.5 - after epson printer software update 2.14 my 9890 started printing images "smeared" out of register across the page.
Over an hour with Epson tech ended with trashing the /Library/Printers/EPSON folder and downgrading to the previous driver. This fixed the 9890 but left my R1900 disabled. R1900 software is no longer available as a stand-alone install - only through Sofware Update. But that will kill my 9890.
Epson tech said it's Apple's fault and they need to fix it.
Apple, where's the fix?

I had the same problem and after untold hours working with Apple & Epson we got to the problem with the Apple software update 2.14. I was told I had to decide if I wanted my 9900 to work or my office printer (Workforce 610) to work. I was incredulous that I would be forced to make this choice but of course chose to get my 9900 back up and running. This fix was given to me 3 weeks ago tomorrow and we still no resolution from Apple / Epson? Are you kidding me? I am considering throwing my Epson 610 in the trash and buying another brand of office printer so I will have no conflict with my 9900. Seems like a pretty stupid solution I must admit.
I called Epson back again on Friday and got a horrible run-around. The guy from the Pro Graphics group (techs for the professional series printers) insisited I needed to talk to the consumer printers group. Once I got to them it was clear they had no clue about this issue. I left the phone totally frustrated and angry. I ended up emailing a very capable guy from the Pro Graphics group I had worked with 3 weeks ago and he was nice enough to reply. The answer however was there is still no fix to the Apple update. At t his point I am not sure how to know if the update has been fixed. The message I get from Epson is just keep checking back. The problem is that it seems few at Epson are aware of the problem so you have to go through a long explanation only to hope you find someone that is aware.
Nothing like running a printing company and telling your customers you cannot print their invoice because your printer doesn't work! Thanks Apple for the quick fix on this!

How do I remove Epson Printer Software Update 2.15.1?

I have two Epson Perfection 1670 Scanners. Epson Printer Software Update 2.15.1 installed today on my new MBP, and both scanners immediately stopped working. A hard reboot does not solve the problem. I had the same trouble on two other Macs running OS X 10.7 after similar software updates. The scanners still work on computers without the software updates, and on computers [including a G4 iMac] with earlier versions of OS X.
The symptom is this: I try to import a scan from Preview, and the scanner light starts, but the motor stalls at the start of a scan, and I receive the message 'Scanner is warming up', and then nothing more happens. If I try re-starting the scan, I have a message telling me that the scanner reported an error.
How can the software update be removed, and the previous software be restored? Will Time Machine do it? If so, then what needs changing, please?

I was told by Epson:
If you have a Time Machine setup and a restore point saved for your computer that is earlier than the day you performed the update, Time Machine should take care of the problem. It is meant to restore your computer to the way it was at the time of the restore point. If you have any more detailed questions about time machine, I would suggest contacting Apple support.
Another option is to install an older version of the ICA driver. If you would rather do this, reply to this message and let us know so that and we can have the file uploaded and then send you a link to download it.
I opted for the second solution (the previous ICA driver) and they sent "ICA v530". This too didn't work.
What DID work was manually replacing the current driver (version 5.6) with a version of the driver from my other computer. . . this computer had version 5.11 of the driver.
To find the driver:
go to Library -> Image Capture -> Devices. Go to file name EPSON Scanner. THIS is the driver.
"Get Info" will tell you what version you have.
What is interesting/odd is that all my computers are updated by Apple's "Software Update". Yet only one computer (attched to the scanner via USB), had the problematic driver version 5.6.
Hope this helps.

HT203343 Epson printer driver

Is there a specific printer driver for Yosemite/Epson

There is not one specific printer driver - there are multiple, different drivers for different printers.
In general, Yosemite should automatically download and install printer driver software for any attached printer, providing there is a driver available - you can find the list of auto-supported printer drivers at: OS X: Printer and scanner software available for download - Apple Support
The exception to this is if you upgraded from a previous OS version where you had manually installed printer drivers. Mac OS X won't auto-update manually installed drivers, so you might be stuck with old (incompatible) drivers which could cause a problem.
My suggestion is to first check the list to make sure your printer is supported. If it is, disconnect it, and remove the printer reference from System Preferences -> Printers & Scanners. Then re-connect the printer. When you try to add it in System Preferences the OS should detect it and load the appropriate driver.
If your printer isn't on the supported list, check with Epson to see if they have an updated driver you can install manually - just remember that the OS won't update manually-installed drivers and you'll need to look out for any updates yourself.

HT3669 Epson printer driver update for 10.8.5

Similar Messages

Maybe you are looking for