HT3669 Failed printer setup, bonjour via airport express on 10.8.3, unable to download drivers?

Trying to install a Samsung SCX-4500 printer over bonjour via airport express. My Mountain Lion machine sees the printer and I've manually installed the latest Samsung drivers, it says it can't find the software on Apple's servers. I just downloaded the latest drivers from Samsung directly, it did not resolve the problem.
I am unable to select printer drivers manually for the 4500; even if I manually select the 4500W drivers it still attempts to download software (unsuccessfully). It works perfectly on 2 Lion machines and a PC, unsure what the deal is.
I'm having trouble even getting the post message' button to work now, it isn't my day...

Link to Apple supplied print drivers:
Samsung Print Drivers
You can also try resetting the print system:
Reset Printing System

Similar Messages

No printing from XP via AirPort Express

We're using AirPort Extreme. A Windows XP machine is connected via Ethernet cable to the AirPort, and a Mac iBook is connected wirelessly. Both machines can access the internet without any problems.
Also connected to the AirPort (via USB cable) is a Canon PIXMA iP4200 printer. Printing from the iBook works fine, but we are unable to get the XP machine to print.
I've downloaded and installed the most current driver from Canon's website. (The printer works fine when plugged directly into the XP machine -- it's only through the AirPort that it won't work.)
I followed the instructions on p. 54 of the "AirPorts Networks for Windows" documentation -- creating a port with an IP of 10.0.1.1 when adding the printer. I've tried disabling the XP firewall, but that had no effect.
The printer showed in the XP "Printers and Faxes" window. It said "Ready" (not "Offline"). When we sent something to print, the job appeared in the queue. But then it would eventually time out with a message that the printer is either busy or there's some other error.
To complicate matters, I deleted that printer from XP's "Printers and Faxes" in one of my repeated attempts to start over. Now when I go through the process, it tells me that port 10.0.1.1 is already in use, so I can't even get it to show.
This is XP Home Edition, Service Pack 2.
We tried calling Canon support, but they don't support networked printers.

Also, I'm unable to repeat them now because it fails
at the step, "...if the IP address of the AEBS or
Airport Express is 10.0.1.1, put "10.0.1.1" and let
it generate "IP_10.0.1.1" as the port name."
This no longer works because XP says that that port
is already in use.
At the "Up will come the "Select the Printer Port" screen" rather than create a new port, use the drop down box to select the IP_10.0.1.1 port which already exists.
iFelix

Can't print Canon Pixma via Airport Express

I am at my wits end. I can't print to my Canon Pixma 830 when the usb is connected to the aiport express (I can print when plugged directly into my ibook). I upgraded my base station to v6.3 from 6.2, and did all basic troubleshooting (restart, unplug/replug, etc.) and still no luck.
Any suggestions?

The Canon UFR2 and CAPT printer drivers for OS X do not work when the printer is connected to the USB port of an Airport device, or even a 3rd party print server. This has always been a limitation of the Canon UFR2 and CAPT for OS X.
FWIF - The Canon inkjets work fine with the printer connected to the Airport USB port.

USB printer setup on an Airport Express extended from an Airport Extreme

Not sure how to set this up.
I have a USB Printer connected to my Express, which is set up as an extension of my Airport Extreme base station.
The Express shows the printer connected on the setup - printer screen, but how do I get access to it from my wirelessly connected laptops.
When I checked the box to connect to the printer through a WAN network, it gave me a problem to resolve, which somehow required me to set up a host name for publishing to the internet. not sure this was going down the right path.
The Airport extreme manual mention using bonjour, but i don't see that installed on my laptop, which it said it would be.
any ideas?

The express can only support one band at a time. The phones only can connect to 2.4, while ipads and computers can connect to both bands.
Looks like your express is set to use the 5 Ghz band.

Trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple

trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple (although it says that the software is available from Apple)

Rfh723-
You are technically way ahead of me, so I can't argue with what you did.
How about an even simpler WiFi network consisting of only the AirPort connected by an Ethernet cable to the printer? If the iPad still can't find the printer when connected to this network, then something is broken!
(Also try a different Ethernet cable.)
Fred

Cannot print via AirPort Express

I bought Airport Express a few days ago and have connected the ethernet cable and have wi-fi running. However I cannot print wirelessly (the printer is connected to AirPort Express via USB) and everytime I try it fails to locate the printer. This is because the settings are old (I used to hav my iMac as a base station but now the printer is not connected to the iMac and is now connected to AirPort Express). Could somebody tell me how I can fix this problem.
Thank you in advance

Thomas I did find this on HP's Web site. But beside this you may want to look for other (GIMP printer drivers that may accomodate the wireless compatibility).. HP does state:
Is my All-in-One product supported via the Rendezvous/Bonjour protocol?
NOTE: Bonjour is the new protocol for Mac OS X v10.4.
ANSWER:
HP does not offer support for any All-in-One product via Rendezvous/Bonjour, however some products might work when plugged into an Airport Basestation via USB. These products might work with the print functionality only. See the list below for such products.
PSC 1100 series
PSC 1200 series
PSC 1310 series
PSC 1350 series
PSC 1600 series
PSC 1400 series
PSC 1500 series
PSC 2100 series
PSC 2170 series
PSC 2200 series
PSC 2300 series
PSC 2400 series
PSC 2500 series*
PSC 2600 series*
PSC 2700 series*
Officejet 4100 series
Officejet 4200 series
Officejet 5500 series
Officejet 6100 series
Officejet 6200 series
Officejet 7200 series*
Officejet 7300 series*
Officejet 7400 series*
LaserJet 1220
LaserJet 3200m
LaserJet 3030
LaserJet 3300 series
NOTE: Printers marked with an * have built-in networking allowing them to connect to an Airport via either Ethernet or 802.11b wireless without the need for a USB connection. These products also have full functionality when connected via one of these connection types.

Unable to print to my Oki C3200 via Airport Express

Hi
I wish to print wirelessly via Airport Express using my Oki C3200 printer. I have followed all the recommended install procedures.
I am using a Windows Vista Home Premium 32 bit PC, have configured the printer with Bonjour for Windows, and still cannot print.
The printer works fine if connected by USB direct to the PC.
Any help appreciated.

Yes, my iMac is hooked to my Airport Extreme through it's ethernet port.
No, I don't have AIM.

Epson Aculaser CX11NF printing via Airport Express

Well today has been an interesting day...
Connected printer to airport express usb port - had problems printing via this in the past but since I'd moved the printer so I could plug it into the usb port on a computer and then share it that way I thought I'd give it another go.
Macbook 10.5.2 prints perfectly first time
Powerbook 10.4.11 can see it and connect but won't print
Toshiba XP laptop) can't see it
Check out the net, try out the info I find and hey presto! Toshiba XP laptop sees and prints perfectly
Share printer via Markbook and Markintosh and Powerbook prints fine but still won't print directly via airport express.
Feels wrong that an xp book can print via an apple airport express easier than an apple laptop...
Anyone have any thoughts?

Hi,
Thanks for all your replies. I tried repairs pewrmissions in disk utility again and got slightly excited when printer utility automatically selected a generic post script driver but my printer just printed jibberish.
I've just run repair permission in pinter setup repair and this is my log:
The file /System/Library/StartupItems/PrintingServices/PrintingServices is missing!
The file /private/etc/cups/classes.conf is missing. This file is deleted when using the Reset Printing System option.
The file /private/etc/cups/ppds.dat is missing. This file is deleted when using the Reset Printing System option.
The permissions for the file /usr/libexec/cups/filter/rastertodymo are incorrect!
They are lrwxr-xr-x, but should be -rwxr-xr-x
Repaired.
Recreating symbolic links...
Done.
Verification complete.
2075 files examined. 1 problem was found and repaired. It is recommended that you verify the permissions again to make sure the values are correct.
3 missing files/directories found during the verification process. They may be responsible for certain printing problems. Printer Setup Repair cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
Does it mean anything to anyone?

Share printer with Windows 7 via Airport Express?

I would like to share a printer with a Windows 7 Laptop via airport express. The Windows 7 Pc does not detect the printer whereas printing from the Macbook Pro works fine. Any ideas?

Hi, I was searching for the same (my colleague has a windows PC; everyone else here has mac). I have not tested this, since I am working on mac, but it seems like you need to install "Bonjour" for windows.
http://support.apple.com/kb/ht2586
Hope this helps (though it's a bit late)
/W

HP printer not printing via Airport Express

I have a HP DeskJet D2330 printer that I am trying to use via Airport Express. The issue is that while the printer is detected in the Airport Utility, and is detected in System Preferences as a Bonjour printer, I can't print to it. Documents sent to the printer appear in the queue and then disappear but no pages come out of the printer.

Hi - similar problem. Mine talked a little (test page would print about ~1 inch then grind to halt). No luck with escalated apple network tech. Problem (apple sez) is with HP. HP is quiet but has list of printers "likely" to work with Airport Extreme , but dated (indicates rendezvous with extreme vice bonjour). FYI, my printer works fine when USB direct to mac. Also Works fine from Mac or PC as ethernet-connected printer on home network (with Linksys/N Giga router) as network printer (also sets up as "bonjour" printer for what that is worth). Also problem exists with imac connected to Airport extreme via wireless or wired. So...problem seems to be pretty specific to talking via airport extreme USB. Havent tried to use ethernet yet, but need the slot for other equip.
Anyone else having any luck?
Also anyone have proven good printer hookup? I need photo quality printer.
mpw

Very slow printing from Konica connected via Airport Express

Hello folks,
I have a very strange problem with erratic printing to a network printer, connected to an Airport Express via ethernet.
The Network:
- Draytek modem/router hosting DHCP
- Time Capsule connected to Draytek. It's in bridge mode, and runs the WiFi network
- Airport Express 1 in "Join a Network" mode, ethernet clients allowed
- Konica Minolta Magicolor laserjet printer connected via ethernet to AX1
- Airport Express 2 in "Extend a Network" mode elsewhere in the office
All client devices on the network are getting IP addresses in the correct range etc. I have fixed the IP of most devices at the router level, so they don't change.
Client Macs print directly to the printer using IPP (or might be LPD, I can check if relevant) using apparently a correct driver and IP address.
WiFi network is very strong throughout, and the distance between Time Capsule and AX1 is just a few feet.
Here's the problem:
At the start of the day, the printer works just fine. Fast.
Then, inexplicably, you send a document to it and the print queue reports "Spooling....xx%" which increases painfully slowly compared to when it's working normally.
This happens randomly with both small and large files. A modest photo can take over an hour to fully spool and print when it's doing this.
Turning the printer off and on again tends to make it work properly, until the above happens again.
This is driving me mad. Is there a problem with:
(a) The WiFi network or airport hardware
(b) The printer
(c) The drivers
(d) The printing protocol
(e) Me
(f) All of the above
Any insight would be most welcome. The Konica tech reckons it's working, but I think he didn't spend long enough sending print jobs to it for the problem to manifest.
P.S.
One of my main questions is, when the print queue says "spooling", is this the process of progressively sending the file over the network? Or does spooling occur when the data is either already fully arrived at the printer, or hasn't left the Mac yet?
Could the printer's unwillingness to accept data cause the slow spooling? Why might this happen?

It should work. Enable Printer Sharing via System Preferences -> Sharing. The Mac does need to be turned on.
P.S. Try to just post one thread on your question instead of crossposting over several forums.

Can we print with a non-wifi printer via Airport Express?

Is it possible to print with non-wifi printer via Airport Express?

Read through this previous thread for answers: https://discussions.apple.com/message/21994667#21994667

Printer Spooling via Airport Express...

My G4 is connected via Airport Express to a printer. It has worked fine, in the past, but now when trying to print, it appears to connect but then a message reads, "spooling" and hangs without ever printing. What should I do to correct this, please?

Have you tried posting this in the "Airport Express" Category of the Forum?
If not, I'd suggest that as you may get more help there.
http://discussions.apple.com/forum.jspa?forumID=1011

Trouble printing to Epson Workforce 435 via airport express network

We have an Epson Workforce 435 printer that connects wirelessly to our home network via Airport Express. After we switched to AT&T, we could no longer print from our Windows 7 PC connected to the network via Airport as well. Our Macbook air works just fine. The printer's network status sheet says it is connected, but it's like our computer can't find it on the network. Can't ping the printer's IP address either.

Okay, I have checked the settings on the AX - it is set up to be 802.11b/g compatible, so that doesn't appear to be the problem.
I had a friend come over with her macbook - she was able to detect the wireless network, but wasn't able to connect to it, even when I gave her the password. Does this help diagnose the problem?
Here is additional information about how the AX is currently configured:
In the Airport tab in AirPort Utility:
Wireless Mode: Create a wireless network
Radio Mode: 802.11b (802.11b/g compatible)
Channel: 1
Wireless security: WEP
MAC Address Access Control: Not Enabled
In the Internet tab in Airport Utility:
Connect using: Ethernet
Configure IPv4: Using DHCP
Ethernet WAN port: Automatic
Connection sharing: Off (Bridge mode)
I have tried turning wireless security off, but that didn't help the problem. I have also tried turning MAC Address Access Control to Timed Access, inputted the MAC address of the printer, and gave it permission to access the network all day, everyday, but this didn't work either. I have looked at changing the connection sharing settings, but I don't really understand what I'm doing here, so I am reluctant to mess with things much. This seems like the most promising potential solution?
Thanks!

Printing with Epson 3800 via Airport Express

I'm trying to get my Epson 3800 printer working over a Airport Express connection (3800 -> USB on Airport Express). The printer is showing up fine, however when I get to the print dialog I don't have all the advanced controls as I do when printing directly connected to the computer (printer settings and advanced media control).
What do I need to do to get those working?
OSX 10.6.3 with the current 3800 driver (6.11) and firmware (o02179_q).

Hello Jeff,
There could be one of two things causing this.
1. The print dialog is not expanded. When you select to print, if you only see the Printer name and the Presets menu, then you need to click the triangle next to the printer name. This will expand the print dialog view and show you all the menu options.
2. If the print dialog is expanded but the menu options are different, then you may have created the print queue for the Airport connection using the Gutenprint driver. If you open Print & Fax and select the 3800 queue for the Airport connection, in the right hand pane you can see what driver is being used in the Kind section. If this shows Epson 3800 - Gutenprint v5.x.x, then you have created this print queue using the Gutenprint driver rather than the Epson driver. The Gutenprint driver usually provides most of the functions you would require, they are generally just located under different menus. So you can choose to keep using the Gutenprint driver or delete this queue and create it again, ensuring you select the correct Epson driver.
Pahu

HT3669 Failed printer setup, bonjour via airport express on 10.8.3, unable to download drivers?

Similar Messages

Maybe you are looking for