HT3669 How can I enable scanning over WiFi with Epson PX-504A?

I have driver 9.00 (9.11?) installed. I am trying to get access to the scanner through wifi.
It seems I can print over WiFi, but the scanner is not connecting.
This works in Linux by installing a network driver and using the Image Scan! software.
How does it work in MacOS?

Hope this is helpful to someone. I have an Epson Xp-300 connected to my MacBook Air through AirPrint/ wifi. The printer doubles as a scanner. When you open up the 'Printers & Scanners' function on the MacBook, you can choose a tab to either print or scan. If you choose scan, you can then choose 'open scanner'. That cranked up the scanner and opened a dialogue box to process the scan. I stuck my photos on the glass, chose 'save to iPhotos', did an 'overview' to make sure all was well and then hit 'scan'. The scanned photos then appeared via wifi in my iPhotos application. Haven't gone past that yet and am still feeling my way but hopefully I'll work out how to stream them to others.

Similar Messages

  • How can i switch my att wifi with time capsule

    how can i switch my att wifi with time capsule

    Sorry I have no idea what you mean.. switch off, switch on, swap over.
    Bridge the TC and use same ssid (wireless name), security but different channels..
    Or just turn it off.
    Please write a question that is a sentence and has sense.

  • How can i use facetime over wifi on my iphone 4?

    how can i use facetime on wifi on my iphone 4?

    iPhone User Guide (For iOS 4.2 and 4.3 Software)
    iOS: Using FaceTime

  • How can i enable mcafee site advisor with fire fox v 5.0 the latest update

    i have your latest version which is v 5.0 but mcafee site advisor hasbeen disengaged ... how can i enable site advisor ... thank you alex [email protected]

    I have found that firefox is better than internet explorer but has many more hickups like this with mcafee siteadvisor... why is it that internet explorer does not have this problem can anyone tell me alex

  • HT1695 How can i connect to a wifi with my Iphone 4s when it searches for wifi but never finds any signals anywhere available?

    My Iphone 4s can not scan for wifi signals. My phone was jailbroken and it was working fine until one day, my phone began to have problems searching for wifi signals. It connected and took longer to do so, however the next day it didnt pick up any wifi what so ever. I tap settings>wifi>on> and its an endless search in places where there is wifi.I saddly lost my hard drive where i kept a back up for my iphone, so restoring it from a back up wont do. I plugged it in on another
    computer which i had to set restore as a new phone. I did and i still hasn't worked, i am open to suggestions and the following i am aware of:
    It hasnt been dropped
    condensation/humidity (which i dont want it to be because it has been raining a lot and its never been wet)
    Thank you in advance!

    - Reset the iPod. Nothing is lost
    Reset iPod: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Setting>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connection
    What encryption our you using? Try changing the encryption, icluding using no encryption for test perposes.

  • How can I get data (not wifi) with my new iPad in Iceland. Thanks

    How? If I can can't find a wifi spot?

    I assume that you need to find a cellular provider for your iPad. See if this is what you need.
    http://www.icenews.is/index.php/2012/07/16/vodafone-offers-prepaid-sim-cards-and -prepaid-3g-for-visitors-in-iceland/

  • Can't access email over wifi with iPhone 5, iPod Touch, or iPad

    All was working fine, then suddenly stopped.  Get message "Cannot Get Mail The connection to the server failed.", followed by "Cannot Get Mail The mail server "imap.yahoo.com" (or "imap,gmail.com) is not responding. Verify that you have entered the correct account info in Mail settings." message.  Email works on cellular connection on iPhone; not an option on iPad or iPod Touch.  I've tried verifying settings, resetting all devices, deleted and reinstalled email accounts (yahoo and gmail).  No luck.  Any suggestions?

    I got this error for my Gmail, and Hotmail accounts but not for my Exchange account at work. It seems to be a problem on Apple's side since it affects multiple mail systems.

  • How can I enable synch without losing my apps?

    Hello,
    I read the forums and I cannot find a solution to my unique situation.
    I have a 2nd gen iPod Touch and synced apps and music with iTunes and everything was mostly great. The only problem was the slowness of iTunes so I started using MediaMonkey instead to transfer music. I also downloaded apps exclusively through wifi, so I never bothered to sync my iPod with iTunes for months. Then I upgraded the harddrive, did a clean install of Windows, and sold my old harddrive. It was not possible to sync my iPod anymore and I didn't care because MediaMonkey/Wifi worked perfectly for my needs ...
    Until I installed firmware 3.1! Now MediaMonkey crashes and I can't add/remove songs from my iPod. So I was going to wipe my iPod and give the new version of iTunes another try, but now I am worried about losing all the apps I've downloaded over wifi. I've logged into iTunes and I cannot find a record of apps that I have downloaded/purchased. *Which brings me to my question: How can I enable synch without losing my apps?* I'm particularly worried about the apps that were free when I got them but they now cost money.
    Thank you for your time,
    bougatsa

    The "File -> Transfer Purchases" option didnt work at first, but then I clicked around and managed to get this new computer image added to the new Home Sharing feature. Now all my iPod apps have been transferred to my local iTunes apps folder, thank you Julian!
    And Anna, thank you (tack?), I believe you that it works but now that I have my apps locally I won't try I'm sure you'll understand.
    I had bad thoughts of ditching my iPod for something else but I won't now! This forum rocks! Thank you all again
    Bougatsa

  • How can i use my apple ID with the itune store over my windows laptop

    how can i use my apple ID with the itune store over my windows laptop

    If you don't have iTunes installed on your laptop then you can download and install it from here : http://www.apple.com/itunes/download/
    You can then log into your account on it via the Store > Sign In menu option (on iTunes 11 on a PC you can get the menus to show via control-B) :
    And you can then select the Store on the left-hand sidebar (you can enable the sidebar via control-S), and then browse items in the store and buy them by clickin on their price.

  • How can i connect ipad mini wifi celluar to 2g internet plan, how can i connect ipad mini wifi celluar to 2g internet plan

    How can i connect ipad mini wifi+celluar to 2g internet plan

    Hello Sir!
    After weeks of testing, i found the solution of my question. It´s quiet simply!!
    1º iPhone (3G Internet acess) connected to Mac mini by USB or BlueTooth or WiFi.
    2ª in Mac mini must be activated in "Preferencias", "Compartir", the option "Compartir Internet",
         "Compartir Conexión desde":   iPhone USB  or  Bluetooth PAN
         "Con otros Ordenadores vía":  Ethernet
    3º Ethernet cable must be connected from Mac mini to Time Capsule !!
    4º In Time Capsule "Internet":  connect by:  DHCP
                                 "Network": bridged
    Nothing more!!!  Sooooo simply!!
    After this, Windows XP SP3 connect without problem over TC´s WiFi or Ethernet to the Internet!
    Also other Devices like IPad, or other iPhone, etc.
    Of course it can be a created a WiFi connection (PPP) between the iPhone and the Mac
    and it´s working to.
    But ALWAYS, by changing the connection mode, must be changed the Thethering mode.
    In- and Out-Going!
    Thank you for your help, no I made me a "small" TC expert...lol 

  • How can I enable the Special Stock Indicator in the source list?

    Hello Gurus,
    How can I enable the Special Stock Indicator in the source list? This can be found in the Maintain source list detail screen, source group and beside the order unit. Even I am in the create or in change mode, still the indicator can't change
    Thanks!

    OSS note 668764 explains that the special stock indicator field is a display only field and cannot be changed in the source list. it is only taken over from a scheduling agreement.

  • Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

    Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Can't get email over wifi at home, but can at work.

    Okay, I think this is a problem with settings on my time capsule, but I can't figure out what. On my iPhone 5 and wife's iPad I can get email over the cellular network and over wifi at work. I can't get email over wifi at home, get a can't connect to server error. Also had a friend, who uses the same ISP, try with his android phone - same error, but works over wifi at his house. Since I can get email over cellular and wifi at work, I'm fairly confident that I have the server settings correct. Any ideas?
    Thanks.
    Rob

    Was facing a similar issue with my friend's iPad (Latest one). Forcing the DNS Server to 8.8.8.8 (I think Google's DNS servers) fixes this issue. I had faced something similar on my iMac a long time back. Something a little strange about how Apple products do a DNS lookup? Not sure if it is an issue with the response time of the DNS servers as well..
    In any case, the good news was changing it to 8.8.8.8 worked.. Luckily the iPad's network configuration tool allows you to navigate to the pane where you can see the DHCP supplied IP addresses and just go to the DNS field, delete what was present there and force it to this address.
    The difficulty in coming to this conclusion was the fact that the browser works fine for all the sites we had tried. It is mostly the apps that had trouble, and the App store also was inconsistent in reporting details..

  • How do I get my iPhone to sync over wifi with my new hardrive?

    I had to replace my hardrive in September. I plugged in my iPhone and it says it's waiting to find the name of my old hardrive before syncing over wifi with it. How do I change the name of the computer my iPhone is looking for to sync with? Or, if it would be better, how do I change the name of my new hardrive to make iPhone happy? (It's been so long I can't remember.)

    You have to turn on Wi-Fi sync again. See > http://support.apple.com/kb/HT1386

  • How can I enable embedded pl/sql gateway to run on port 80

    I have a new 11G install on OEL 4.0, database created. I would like to be
    able to access the instance using the pl/sql gateway. Works fine with
    port 8080, the default. How to I enable it to run on port 80?
    I found this statement in the following docuementation:
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb22pro.htm#ADXDB2500
    Using HTTP(S) on Nonstandard Ports
    By default, HTTP listens on a nonstandard, unprotected port: 8080. To use HTTP(S) on
    the standard port, such as 80, your DBA must chown the TNS listener to setuid ROOT
    rather than setuid ORACLE, and configure the port number in the Oracle XML DB
    configuration file /xdbconfig.xml.I have root priviledges on the box.
    I've tried setting the listener file permissions:
    chown root:dba /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
    chmod 6775 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
    Also put root in the dba group.
    The permissions turn out like this:
    -rwsr-sr-x 1 root dba 830854 Jun 17 21:04 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
    I stopped the listener, bounced the database, and started the listener again.
    But it still shows the process being owned by oracle:
    oracle 29682 1 0 21:08 ? 00:00:00 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr LISTENER -inherit
    Changing the port is easy:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port FTP-Port
    8080 2100
    At this point, I can access the apex home page with the following url:
    http://hostname:8080/apex/f?p=4550:10:1454849288245548
    I can than change it to port 80:
    SYS>begin
    dbms_xdb.sethttpport('80');
    dbms_xdb.setftpport('2100');
    end;
    2 3 4 5
    PL/SQL procedure successfully completed.
    SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port FTP-Port
    80 2100
    When I try to access apex with the following url:
    http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
    I get the following:
    Failed to Connect
    Firefox can't establish a connection to the server at hostname.com.
    Though the site seems valid, the browser was unable to establish a connection.
    * Could the site be temporarily unavailable? Try again later.
    * Are you unable to browse other sites? Check the computer's network connection.
    * Is your computer or network protected by a firewall or proxy? Incorrect settings
    * can interfere with Web browsing.I can set the port. Just can't talk to it.
    This is the entry from the listener log:
    <msg time='2008-07-03T15:40:09.741-06:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='hostname'
    host_addr='xxx.xxx.xxx.xxx'>
    <txt>TNS-12546: TNS:permission denied
    TNS-12560: TNS:protocol adapter error
    TNS-00516: Permission denied
    Linux Error: 13: Permission denied
    </txt>
    </msg>
    So this looks like an permissions problem. But where? I posted
    this on the apex forum here:
    Re: How can I enable embedded pl/sql gateway to run on port 80
    They suggested asking here.

    No, that thread did not provide the information that I need. Some more data:
    I have the port set to 8080:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port FTP-Port
    8080 2100
    At this point, I can access the apex home page with the following url:
    http://hostname:8080/apex/f?p=4550:10:1454849288245548
    I can than change it to port 80:
    SYS>begin
    dbms_xdb.sethttpport('80');
    dbms_xdb.setftpport('2100');
    end;
    2 3 4 5
    PL/SQL procedure successfully completed.
    SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port FTP-Port
    80 2100
    When I try to access apex with the following url:
    http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
    I get the following:
    Failed to Connect
    Firefox can't establish a connection to the server at hostname.com.
    Though the site seems valid, the browser was unable to establish a connection.
    * Could the site be temporarily unavailable? Try again later.
    * Are you unable to browse other sites? Check the computer's network connection.
    * Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
    I can set the port. Just can't talk to it.

Maybe you are looking for