HT3669 HOW TO ADD NETWORK PRINTER HP LASERJET M1005

HI
HOW CAN I ADD HP LASERJET PRINTER IN MY MAC WHICH WAS ADDED IN OTHER NETWORK PC WHICH IS WINDOW BASE

Hi Vedarajen,
I'd recommend visiting this link:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1 839459&lang=en&cc=us&prodTypeId=18972&prodSeriesId=1839458&taskId=135
Select your OS and download the available drivers. Once they are installed the printer should be available to select from as long as the printer is connected to your network.
Hope this helps!

Similar Messages

How to add hp printer in windows xp which is in a wireless network?

how to add hp printer in windows xp which is in a wireless network?

What printer?
In general, you can download and install the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to configure network printer with Linksys WRT54GL router network

I just bought a Linksys WRT54GL router and I am planning to build the following home-network around it:
1. A desktop computer connected to router via ethernet cable (hard-wired).
2. An HP Network Printer (Color LaserJet CM1312 MFP) connected to router via ethernet cable (hard-wired).
3. A notebook connected to router via Wi-Fi.
I want both computers (desktop and notebook) to be able to share files, and also to share the same network printer.
a. How do I do this?
b. Do I need to install the printer drivers in both computers as if the printer was local for each one?
c. What settings do I need to include in the Linksys router settings (and also the printer settings) to allow all this? I've read on the internet about DHCP configs, IP address, etc. but I hardly understand anything.
A step-by-step ("for dummies") explanation will be extremely appreciated.

You will need to install the printer driver on each computer that will be using the printer. You will need to have a printer driver that is designed to be used on a network. Many of HP's drivers (but not all of them) can be used for either a USB or a network connection.
Usually, when you use HP's printer installation software, it will walk you through the printer installation procedure, and install the printer drivers. This software is normally located on a CD that came with the printer. Some installation software demands that you setup a USB connection first, then switch to a network connection. Other installation software might install a network connection directly. Just follow the HP directions.
There are no special settings in the router. Simply wire (using an ethernet cable) your printer to a LAN port on the router, when the installation software (or instructions) tells you to do so.
Your printer will likely get a different LAN IP address (192.168.1.x ) from time to time. Some printer drivers can handle this and still work properly. Other printer drivers get confused, and cannot find your printer when it changes addresses. If your driver has this problem, then you will need to assign your printer a fixed LAN IP address. This will force the printer to have the same LAN IP address each time you boot up your network. If you need to do this, you will need to enter the LAN IP address directly into your printer (Sometimes this is done using the printer's buttons and display panel, and sometimes this is done using HP printer software). Note that any fixed LAN IP address must be outside your DHCP server range (defaults are 192.168.1.100 thru 192.168.1.149 ) , and it cannot end in 0, 1, or 255. If you need to use a fixed LAN IP address, I would suggest you use 192.168.1.13 , which should be easy to remember by looking at the model number of your printer. If you need to use a fixed LAN IP address, you will also need to enter the Subnet Mask 255.255.255.0, Default Gateway 192.168.1.1 , and DNS Server 192.168.1.1 , into your printer. If you use a fixed LAN IP address in the printer, you do not need to change any settings in the router. The router will automatically find your printer when you turn your printer on. Even if your printer is using a fixed LAN IP address, your computers can continue to get their address automatically from the router's DHCP server.

How to lock the Printer of LaserJet Pro 500 Color MFP m570dw

how to lock the Printer of LaserJet Pro 500 Color MFP m570dw

You can set a control panel lock security level and password for your HP LaserJet series printer. To lock your printer, follow below link:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl03612

HT3500 how to add Hp printer to i pad hp 5510

how to add hp printer 5510 series to i pad 2

Some printers require a firmware update from the manufacturer to enable the AirPrint feature. Check with HP for available updates for your printer model.
You might also want to post in the iPad Community Support area....as this is not a question for the AirPort Extreme, AirPort Express or Time Capsule.
Click Here:
Using iPad

HP Laserjet 2100TN - how to add IP printer in Snow Leopard

I am not a very technical person, so this was quite an ordeal for me. I was very frustrated by the process and almost gave up. I am glad that I did not
I just upgraded to Snow Leopard and after many hours of reading blogs and instructions etc. I finally got my HP LaserJet 2100TN network printer to print in SnowLeopard. I am running a 24" imac.
All of the blogs/support documents tell you that you have to enter the IP address of the printer to set up an IP printer. To obtain the IP address for the printer, you are told to print a Configuration Page. But I had no idea how to do that. So I found a manual online for my printer, learned that if I pressed the Job Cancel and the Go button at the same time that I would print a configuration page. And it did !!!! It was listed under Printer Informations as HP JetSend Address: ip: 192.xx.x.xx. (I left out my IP address as yours will be different.) I then used the Network application located under Utilities, went to PING, entered the IP address and I pinged the printer. The ping was successful. Then I used the instructions provided at the link below to add the IP printer. Here is the info for the add printer info: http://support.apple.com/kb/HT4507.
Here is the link for the LaserJet 2100 manual.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/bpl06466/bpl06466 .pdf
Good luck.

Many, many thanks. This worked for me.
My HP 2100TN is connected to a router and pinging the JetDirect ip address didn't work at first. After many tries and variations under "Print & Scan" sys prefs, the ping did work with the JetDirect ip address and I finished connecting by following your helpful instructions and links.
The HP 2100TN now prints from OSX 10.8.5 on a "late 2012" 27-inch iMac. The HP 2100TN printer drivers were copied to the sys printer folder from a previous computer running OSX 10.5.8 and which always printed sucessfully through this same router to the 2100TN and still does.
An even worse problem was trying to log into Apple Support Communities with the "username" endless runaround. I finally got to a "Find my Apple ID" link and discovered I had an old Apple ID which I didn't know still existed. I changed the password on that ID and then logged into ASC using the old ID. The login took me straight into the forum and displayed my old and long-forgotten ASC username for that ID. Why that worked, who knows?

How to add the Printer to my network with WPS

Hi there, I have a ZTE router, it is a bit old version and doesn't have the WPS button, how can I add the printer manually to the network? Thanks!

Hi,Not any router supports WPS, some have a button and some provide WPS functionality from the router homepage, I suggest referring to yoru router documentation to ensure its capabilities. You may connect it wirelessly via the HP Software, follow the installation by selecting a wireless connection to the printer.Note: the software may require to temporarly connect a USB to configure the wireless settings for the pritner. You may download and follow the software below:http://ftp.hp.com/pub/softlib/software12/COL51559/Im-124825-3/LaserJet-Pro-MFP-M125_M128-series_v12.34.0.dmg Regards,Shlomi

How to configure network printer on solaris 10 intel based

how to configure the network printer in solaris 10
like hp laserjet printer/printers,

Very very easy.
Go to the print manager . (printmgr I believe or in the launch menu under preferences)
select add a network printer
Fill out the info. I find that the hpijs printer driver works better then the suggested foomatic on my hp 4000s. I could not print pdfs otherwise.
Other things to know is the protocol should be BSD (at least it works for me). And add the port to the destination so 192.168.0.1:9600 for example (for hp).
thats about it. To have it show up correctly in JDS you should probably add it to the printer list under the launch->preferences->printer preferences.

How to add a printer

Hi,
How could i add my HP LaserJet 4015n network printer in Solaris 10 & then register through EBS 12.1.1. Please guide.

I have installed the printer and is printing reports, for xml reports and their pdf outputs are not printing. Please guide regarding the pasta configuration. I have changed the printer type to --PASTA Universal Printer Type, but still not printing after bouncing the concurrent services.

Can't add network printer to my PC

I have an HP Color LaserJet 2605dn connected thru a USB port to a 5-year old computer running XP Home Edition with SP-2. The printer is designated a shared computer. I also have a Linksys wireless home network that operates flawlessly in every respect except for the problem below.
When I try to add the printer to my new HP Pavilion running Vista Home Premium with SP-1 (64-bit), I get a message saying the server for the printer does not have the correct printer driver installed. When I pursue the "add printer" process to the bitter end, I get a Printer driver setup error (error Ox800f0214).
Can anyone tell me the name of the driver file that is missing, where I can find it, and how I can install it?

ON the Vista Home Premium x64 system go to Control Panel -->Printer --> select add printer and select network printer. Stop there. Now Click on the driver you downloaded from here. Once you begin the install with the exe file the wizard(that is already running) should see the driver and install it. Alternatively you could browse for it with \\computername\printername (substituting your own relevant network names for the devices)
Have you tried physically moving it and installing the printer at the x64 system and then phyically moving it back to the other system where you already have it installed? I know that beast is heavy.
Another option; Use universal extractor and extract the drivers from the.exe files. Then you can easily see which one will work when you extract themto a folder and browse there when you add the printer and the location of the driver is needed.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to add a printer to the list of available printers?

I'm trying to connect my MacBook to a printer on my Windows Network. Using the Printer Setup Utility I'm able to navigate to the Windows XP computer that is sharing the printer and can select the printer.
However, when I select HP from the Printer Model list the printer (an HP Officejet 6100) does not show up on the list. How do I add more printer models to that list??
I've tried installing the drivers from the HP disk but that hasn't helped. I've also tried selecting some of the other HP printer models from the list but that hasn't worked either. Anyone have any clues??
Thanks,
Mike

You can download and install Gutenprint 5.1.3 printer drivers which contains a compatible driver for your printer.
If you use HP's driver then be sure you get the Oficejet 6100 Universal Binary driver. If you installed the non-UB driver it will not work on an Intel Mac.

Can not add network printer

Hi.
I installed HP Laserjet Pro P1102 on win 7, I checked it for sharing. trying to add it on winxp on same router but is not detected. I d/led file The HP Home Network Diagnostic Utility application "HPHNDU.exe" on pc that printer is attached to, can not find network printer.
Please help - Thanks.
Sinan

It might be possible to do this with an Airport Express. Your AE joins the network and the printer is connected to the AE. If you can get it cheap (g speed is OK).

Add network printer?

i just got a linksys print server (wireless) and it configured without a hitch on my macbook pro, ibook and pc but how do you add a network printer in os 10.2.8?
xelapond

10.2.8 has all the same options in Print Center - just arranged differently (some names are slightly different too). You're going to need to experiment a little - I don't have 10.2.8 handy to refer to.
To get more of the options to show at once, hold the Option key while clicking ADD, then select Advanced from the bottom of the menu.

Windows 7 system cannot network print to LaserJet 1320

Recently our office got a new Windows 7, 64-bit laptop, and for the past three days I have been unable to get it to print though the network to our HP LaserJet 1320. I can connet it via the USB cable and print directly to the printer, however, I recive an "unalbe to connect" error with all attempts to connect to the printer through the network .
The LaserJet 1320 is conncected to an XP system and shared over the network. Three other XP systems and two Linux systems can connect and print to it just fine. Also the Windows 7 laptop has been able to print to a shared HP DeskJet 6980 and an ancient Lexmark 4039 though the network.
It does not appear to be a network issue. I've tried varous versions of the HP Universal Printing driver, but so far not has been able to connect though the network. Is there one in particualr I should try? Does the Universal printing driver not support network printing?
Thanks! Any help with this probelm will be greatly appreciated.

Never mind solved my issue using the specific vista x64 (on windows7) driver rather then using the universal print driver...
Might fix your issue with network shared printer.

Unable to print to a network printer, HP LaserJet 4000n

After much frustrating going in circles, I finally installed the software for my network printer, an HP LaserJet 4000n, otherwise idetified on my 4 other PCs as HP LaserJet 4000 PCL 6. It works well on the others, including an HP Netbook with Windows 7 Starter.
I finally got the printer to show up as HP Universal Printing PCL 6. I can set the Properties from my wife's new HP G72-B60US, running Windows 7 Home Premium (64 Bit). I can click on "Print Test Page," and I get the message that it was sent to the printer. However, it doesn't print. I get an "Error - Printing" message. I tried using the Windows assistant, but couldn't get any results.

Downloaded Microsoft_Fixit Mats_Run.printing.exe from: http//download.microsoft.com
Microsoft Automated Troubleshooting Services Setup
Checking network printer connectivity
Printer HP Universal Printing PCL6 cannot be contacted over the network
Reinstalled printer as HP LaserJet 4000 PCL 6. Printer HP LaserJet 4000 PCL6 cannot be contacted over the network
Contact your network administrator
Windows could no fix the problem. Please contact your network administrator.
Tied: http://support.microsoft.com/kb/980871 Workaround:
To work around this issue, you can click to clear the Render print jobs on client computers check box on the Sharing tab of the Printer Properties dialog box for the printer.
I posted on a Microsoft forum, and received a reply from an MS tech. Tried all his suggestions to no avail. My printer is attached to a desktop PC running Windows XP Professional. Do I need to install some kind of Windows 7 driver on the server?

HT3669 HOW TO ADD NETWORK PRINTER HP LASERJET M1005

Similar Messages

Maybe you are looking for