HT3669 iEPP, Easy Photo Print, App not 'detecting' my Canon MX870 printer/scanner.

Downloaded the iPod Touch iEPP Airprint app for printing wirelessly to my approved, Canon MX870 printer/scanner and the app can't detect it.
Thanks

I have been having the same issue with the Canon iEPP app not detecting the printer using an iPhone 4S, 5S and iPad Air.  I was on the phone with Canon IT support and the devices and apps can communicate with the printer when I type in the printer IP address in the Safari browser.
I have Comcast Xfinity for interner and have a Linksys Wireless-G router.
I tried about 5 different free app which support my Canon MX870 printer and none can detect the printer.
Any suggestions?

Similar Messages

  • InDesign black ink is printing grey not black on Canon MP470 printer

    Just installed a new IMac computer. I have two printers available. Canon MP470 connected via USB port and a HP Photosmart 6510 connected via WI-FI. When printing InDesign documents on the Canon printer all colors print a weak color (black is grey etc.). The same document printed on the HP Photosmart 6510 black prints as black and other colors appear normal as designed. Illustrator documents printed in black on both machines print black. Have I messed up a setting?

    I have had the following Preferences set:
    On Screen: Display all Blacks as Rich Black
    Printing/Exporting: Output all Blacks as Rich Black
    and have also checked to activate:
    Overprint [Black] Swatch at 100%

  • Need to connect my wi fi printer to my tablet . Canon MX870 to HP slate 10 HD

    How do I print from my tablet.  It says my printer in not connected.

    Hi,
    "Canon MX870" printer is from Canon, Please try the following suggestions:
         http://www.justanswer.com/printers/4jxhp-just-purchased-canon-mx870-wi-fi-printer-want-connect.html
         http://www.askmefast.com/How_do_i_connect_my_galaxy_s3_to_canon_printer-qna4062561.html
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Photo Downloader does not detect Thunderbolt connection. Help!

    I am using Bridge CS5.1 on MacBook OSX 10.8.3. I bought a Seagate Thunderbolt Adapter which works with 2.5" eSATA hard drives (Seagate Backup Plus). Instead of connecting a 2.5" eSATA to this Thunderbolt Adapter to my Mac, I am doubling this thunderbolt connection as a CF card reader by swapping the eSATA portable drive with a CF to eSATA Adapter instead. Photo Downloader does not detect anything connected through thunderbolt!?
    When the CF card or portable drive is connected via the TB adapter, it appears in Bridge and Finder. The Canon's Image Browser (Memory Card Utility) detects only the CF card (not the portable drive) as a Camera and downloads the images from the CF card via the thunderbolt adapter with no issues. I would prefer Bridge to download the images due how the folder names are created by Bridge. (I have been using Bridge for few years now and dont want to change the naming convention. Can't seem to find a way for Canon to name it exactly the same as Bridge. It does YYYY_MM_DD amd I cant get rid of the underscores in Canon's software)
    How can I get Photo Downloader (File: Get Photos from Camera...) on Bridge CS5.1 to detect the Thunderbolt connection as a Camera?
    Excuse my messy desk, here's a pic of the set up with the CF card plugged into the CF to eSATA adapter : and onto the Seagate TB Adapter. and the TB cable goes into the Mac

    It works perfectly well. My issue is getting Adobe Bridge 5.1 to recognise the CF card via thunderbolt in photo downloader.
    Despite having bought a MacPro just a few months ago I still have no Thunderbolt connection so i can't confirm this.
    I do know Photodownloader has not changed a bit since it was presented long time ago and definitively needs a lot of improvement.
    It is very possible that Photodownloader is not capable detecting thunderbolt connections and Canon software doing so does almost proof APDL does not do so.
    You can try to dive in the user library (by default hidden, use menu Go and press option to reveal it) and in the folder preferences find and delete the Photodownloader plist file manual.
    restart photodownloader and try again.
    The other option is to use a USB 3.0 or Firewire (both also pretty fast).
    The third option is to use Bridge itself for renaming the files you imported manual. Using the sort order creation date and batch rename use the option for shot date (yymmdd-number or other info) and either organize with stacks or create folders.
    There is also a nice app (not free but cheap called 'big mean folder machine" from the same team that offers 'A better finder rename'.
    Both offer plenty of options that makes life easier, such as producing folders with specific naming and order in no time

  • HT4356 Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

    Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

    It sounds like the features are working through the USB connection rather than the wireless connection since it is still not seeing the networks.
    Everything points to a hardware failure since the steps provided through the private message did not work and the wireless test showed it had failed.  Sorry.
    You do have some options at this point.
    If it is under warranty, either standard or extended, you can contact HP support at 1-800-474-6836 to have it serviced under warranty.
    If it is out of warranty, you can still contact HP support to find out all the options and the cost of each option.  However, it is my opinion that this money would be better spend being applied towards a new printer. 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • My printer will not detect the alignment page and prints out poorly?

    My printers scanner will not detect the alignment and prints our poorly? Help!

    Please read this post then provide some details.  What printer model? What operating system? Are black and color properly printing on the alignment page?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My printer is not taking hold between two print ? What Do i do ?

    Hello Sir ,
    I have Hp Laserjet 4200n Printer.Operating System installed is Windows XP,But this printer is not taking hold between two print ? What Do i do ?
    Regards
    Vishal Bhadle
    09922222700
    [email protected]

    It depends on exactly what printer you have.  For example, if you have an old Epson printer that is not AirPrint compatible, there is an iPad app called Epson iPrint that will allow you to print from certain selected programs (e.g., Safari, photos).

  • Report printer was not valid, switching to default printer.

    We are using a Crystal Report viewer in Tomcat. Everything works but sometimes in the Tomcat log we get the following error:
    ERROR com.crystaldecisions.reports.reportdefinition.ReportDefinition - Report printer was not valid, switching to default printer.
    Is there a way to stop this error from being reported? If not, is it safe to ignore since everything appears to be working fine?

    Generally safe to ignore, unless of course you want to print to that printer
    Just means report was designed connected to specific printer which is not available where you are now publishing report. YOu could try going into printer set up and selecting No Printer.
    Ian

  • Can i use my new I pad with the Canon MX870 printer?

    Can I use a I PAD 2 with me Canon MX870 Printer?

    The Canon MX870 is not on Apple's AirPrint list of supported printers:
    AirPrint basics
    So you would have to find some Canon app or some third party app in the App Store to do some limited printing from iPad.

  • Cannot print from my ipad to canon air printer

    Cannot print from my ipad 2

    Thanks to searching the community I have got a result. Power off and reboot (press front home button together with top right button) = air print is now recognising my Canon air printer. This reboot is useful for clearing similar types of problems.

  • Photo & iPhoto libraries not detected on iTunes

    I can't sync photo libraries created on new Photo app & iPhoto app to my iDevices. iTunes not detect libraries.
    Tried creating new library with few photos, still iTune can't detect it.
    OSX: 10.10.3 / iTunes: 12.1.2.27 / Photos: 1.0 / iPhoto: 9.6.1

    Do you have iCloud Photo Library enables on your iDevices? On your Mac?

  • Easy-Photo software will not save file!

    Help! I have been using Canon Easy-Photo software for several years now, but in the last few months it has developed a problem where it will no longer save my files. When I finish and print a DVD, then SAVE, it comes back with the error "Failed to Save the File."
    I have uninstalled and reinstalled the software several times, but this does not solve the problem. I just today installed it again (after uninstalling), this time from the disc that came with my new MG7120. Same problem! I went online and downloaded what should be the latest version (4.5) and installed that one - still won't save.
    Any ideas?
    Solved!
    Go to Solution.

    OOOOOhhhhhh! The problem must have arisen around the time I updated to WIN 8.1 - not that the program has problems in 8.1, but because I finally got around to changing my normal user profile into a non-admin type profile. If I run the software as an administrator, I can save files. 
    Well, maybe the problem will happen to someone else and this will help them!

  • Canon MP560 Printer is not detected by System Preferences

    Hi everyone,
    I am using a 2010 Macbook Pro with OS X Version 10.7.5, I have had this Canon MP560 Printer for about 2 years now and it has been working perfectly until lately when it starts to keep on returning "a communication error has occured" whenever I tried to print something.
    I have read through the forum and noticed that people have experienced the same thing as me.
    So for me, I have tried the following solutions:
    1. Checking if the LAN connection is working and printing the LAN test page from printer. It does print ad says that wireless LAN is enabled an active.
    2. I deleted the printer and scanner from System Preferences and try to re-add it
    3. Update my software
    When I tried to re-add it, there is no printer detected. I tried doing the step-by-step that PAHU recommended that worked for some one but unfortunately it does not work for me. My printer still does not appear when I tried to look up a printer.
    (Here is the step by step that I followed:
    The printer component of the MP560 can take longer to appear than the scanner component. The scanner uses Bonjour to advertise itself on the wireless network, while the printer component uses a proprietary protocol called "canonijnetwork". If you select to add a printer and have the Default Add Printer view open, you will see the MP560 as Bonjour Scanner in the Kind column. But if you wait at least 15 seconds more, the printer should appear showing "canonijnetwork" in the Kind column.
    If this printer component does not appear after 30 seconds maximum then it would suggest a problem with the printer driver installation. So open Finder and navigate to HD > Library > Printers > Canon > BJPrinter and trash the contents of this folder. Then download the latest MP560 driver via this link and run the installer. With the installation completed, try to add the printer again.)
    Since I have tried these suggestions but still is not successful I wonder what's wrong with my Printer/Macbook and if there's any other way to add printer (using IP address for example ). If anyone could help me, I would really appreciate it.
    Thanks!

    Yes I can Ping the IP address from Network Utility.
    Before, my Macbook couldn't even recognize the scanner, but now I can add the Scanner from System Preferences.
    However, my printer is stll not detected. I am missing some sort of an application or something?

  • HP Wireless G Print Server not detected during installation

    I have HP2101 wireless g print server to connect to my HP officejet 6210 and I have an HP computer using windows 7. when i put the dvd into computer, follow install instructions, it tells me to connect print server to the computer and wait for the pc to find it, nothing happens, it is not detected. the power cord is in, the mini usb is connected to pc and print server and thre is a green steady light on the power icon, but it does not detect. Help!

    To the TOP!

  • HP Officejet 8600 Cannot install software because printer is not detected on the wireless network

    Hello,
    recently I faced an issue with my new HP Officejet N911a: when trying to install software & drivers, I get an error "printer is not found on the network". Here is my setup and what I tried already:
    - printer is connected to home wireless network (there is solid blue light on the printer etc). It has an IP address 192.168.x.x
    - Windows 7 (64-bit) Lenovo laptop is connected to the same wireless network
    - I don't have any MAC filtering
    - I broadcast my SSID and have WPA-PSK
    - I have default Windows 7 firewall
    I was installing the latest drivers from HP website, but when it comes to installation, software never "sees" my printer on the network. I'm able to ping it and access from Windows explorer (by typing printer's IP address \\192.168.x.x).
    I can install the printer via "Add printer", and wireless printing works fine, but in this case I'm unable to scan (error message is "Scanner communication cannot be established"). So I assume, that for scanning, I definitely need HP software.
    If I connect the printer via USB to my laptop, software installs and I can scan without any issue. However, I would like printer to work wirelessly...
    Does anybody have any suggestions?
    Thanks!

    Hi,
    I don't have a similar printer to check but for few models the default scan to computer is Disabled, please don't ask me why. And we, users, have to enable this by:
      Double click printer icon on desktop,
      Click Manage Scan to Computer,
      Click Enable
    You may want to tick the last square too.
    New software update may remove this option, please use HP Scan from All Programs > HP > HP [your printer] > HP Scan
    Hope this helps. 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Standard text printing missing on Smartform

    Hi All, I am using standard text in Smartform. Standard text contains 'terms and conditions' hence it's used for printing in second page. For printing standard text one window other than Main window has been created in second page. Now when I am taki

  • Fetching data from timesten to oracle 10g database

    Hi Folks, Please provide me the steps to fetch a table data and load in to oracle database table. I need to do feasibility study on this connectivity. kindly do the needful. Thanks, PR

  • Sony PMW-EXI.  Does this work with Final Cut?

    I have heard great things about this camera but it does not appear on the approved hardware list for Final Cut. Is it too new to have been approved? I would like to find a camera that compares to this one that will work with FC. Thanks, Les

  • Record desktop with split audio tracks?

    Is there some program that can record the desktop, as well as multiple audio channels? I need to keep the audio channels split, so I can later individually mute them and edit them when I need to. If there is no such application available for Linux, I

  • Losing System Audio

    Here's a summary of the last 24 hrs for my Mac: -> Safari stops playing any sound, as well as Opera, Firefox, OmniWeb and Camino. -> FCE is fine. -> Audio Hijack stops recording, but works again after i follow their instructions to chnage my Midi set