HT3669 lexmark x6500 can scan page from mac

can not scan page from laptop, always prompt connecting to the printer. Did any one face same issue.?

Try to uninstall the driver then download an updated driver online for your Lexmark X6575. You can also check this article: Macintosh OS X 10.4,5,and 6: Unable to Download (Scan-to-PC) Application List and Cannot Print or Scan

Similar Messages

I can't download Pages from Mac App Store

I have been having some trouble in dowloading Page from Mac App Store.
I had dowloaded and used before, but recently I reinstalled the Mac OS.
When the download reachs amost 10MB, it restarts a few times and gives me the message: "Pages failed to download. Use the Purchases page to try again."
I tried both two following methods:
1 - open $TMPDIR/../C* and deleted com.apple.appstore
2 - Quit App Store.
Open Terminal.
Execute this: defaults write com.apple.appstore ShowDebugMenu -bool true
Launch App Store.
At the Menu bar, there should be a "Debug".
Click on that and press "Reset Application"
Restart App Store.
But none of them worked for me.
Can anyone help me?
Cheers.

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.
Step 2
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.

Can't download from mac app store. error7

for the past few days I can't download from mac app store. new apps & updates.
every time I try I get the message: 'We could not complete your request. There was an error in the App Store. Please try again later. (7)'
anybody know the solution?
thanx
Neta

Hi there, I am having the same problem, but with Error 13 instead. I can see apps I've downloaded in my purchased apps, but when I try to install them that's when I get the error message. See attached image!

How can I upgrade from MAC OS 10.4.11 TO LION

How can I upgrade from MAC OS 10.4.11 to Lion? My processor is only Intel Core Duo.

No core duos sorry.
OS X Lion, will only on 64 bit Intel processor Mac's.
The following Mac's that have 32 bit Intel “Yonah” processors that won't run OS X Lion.
iMac 4,1 Early (Jan-Sept) 2006 17"
iMac 4,1 Early (Jan-Sept) 2006 20"
iMac 4,2 Mid (July-Sept) 2006 17"
Mac Mini 1,1 (Feb-Sept) Early 2006
Mac Mini 1,1 (Sept-Aug) Late 2006
MacBook 1,1 13" (May-Nov 2006)
MacBook Pro 1,1 15" A1150 (Jan-May 2006)
MacBook Pro 1,2 17" A1151 (Aprl-Oct 2006)
MacBook Pro 1,1 15" A1175 (May-Oct 2006)
There is a difference between “Intel Core Duo” and “Intel Core 2 Duo” processors.
Apple Menu > About this Mac > More Information.

I keep getting my browser is no longer supported. how can I upgrade from mac os x 10.6.8

I keep getting my browser is no longer supported. how can I upgrade from mac os x 10.6.8 . Any help would be appreciated

Open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(124406)

Can I upgrade from mac os x 10.6 to Mavericks ?

can I upgrade from mac os x 10.6 to Mavericks ?

If you have previously downloaded Mavericks, and if your computer is compatible: see http://support.apple.com/kb/HT5842
Otherwise, Mavericks is no longer available for download.

Can I upgrade from mac OSX 10.6.8 to 10.8?

Can I upgrade from mac OSX 10.6.8 to 10.8?

Same list as stedman1, but uses model numbers which is slightly more accurate.
Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better)
8 GB or more of available space
Check to make sure your applications are compatible. Application Compatibility
If you have applications that you want to use that aren’t compatible, you can retain Snow Leopard and create a new partition to install Mountain Lion on or you can run Snow Leopard server in a virtual mode.
If your computer isn't compatible, you might be able to upgrade to Lion. Computer Compatibility - Lion
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again.

HT1338 Can i upgrade from mac os x v10.4.11 to snow leopar or do i have to buy leopard

Can i upgrade from mac os x v10.4.11 to snow leopar or do i have to buy leopard

If your Mac meets the System Requirements for Snow Leopard you do not need leopard.
Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...

Can't print from Mac to Windows printer

I have a wireless network of 3 computers and a printer. One is a desktop running XP with the printer attached. The other is a laptop with XP. And the last is a MacBook with 10.4.11.
I can print from both computers running XP but I can't print from the Mac. The Mac sees the printer and I can add it and try to print from it. When I try to print I get the error message:
NTSTATUS_NOMEMORY
I later get the "Unable to connect to SAMBA host, will retry in 60 seconds" message too.

Be sure the printer name assigned in Windows is not more than 11 alphanumeric characters. Long names with punctuation and the like are known to cause problems.
Look at:
Mac OS X 10.4- Can't print to a printer shared by Microsoft Windows;
Mac OS X- Cannot locate a shared Windows printer;
Mac OS X- How to manually add a Windows shared printer;
Setting up to print to a printer shared by a Windows computer via SMB;
And finally this:
Monday, July 24 2006 @ 11:00 AM PDT
Tutorial: Resolving common printer problems
Mac OS X offers a robust printing system with built-in support for hundreds of devices from a wide body of manufacturers. It's not without flaws, however, and printers often become unrecognized or non-functional after a significant Mac OS X update. Printers connected through hubs or AirPort base stations can also exhibit some frustrating issues.
Below is a run-down of the most generally successful printer workarounds. Keep trying until one of them sticks.
Use Printer Setup Repair This tool lets you verify properties of the root user, the Printing Services (lp) user, and Print Operators (lp) groups, reset the printing system, perform CUPS maintenance and more. Run through its set of maintenance tasks before delving into further printer troubleshooting. See how to use it in this article.
Re-install CUPS If you are experiencing printer issues after applying an incremental Mac OS X update, problems may have occurred with your CUPS installation during the update process.
The file is available from this Web site: http://www.cups.org/software.php, and is labeled cups-1.2.1.dmg
Delete then re-add printers/Reset printing system Open Printer Setup Utility, located in Applications/Utilities and look at the "Printer List" Highlight and delete all entries.
Alternatively, go to the "Printer Setup Utility" menu at the top of the screen and select "Reset Printing System".
Click the "Add" button and re-add your printer(s).
Gutenprint and usbtb Some users have been able to resolve printer communication issues by installing the excellent open-source Epson printer drivers available as part of the Gutenprint package (formerly known as Gimp-print) and usbtb, a CUPS back-end for USB printing.
Remove non-required drivers Removing extraneous drivers from /Library/Printers(name of manufacturer) can sometimes resolve printer issues. Remove files that are for other models than your own.
Re-install drivers Re-installation of printer drivers from original media or from a Web download (either directly through the manufacturers site or via a search by model/manufacturer on VersionTracker) can resolve some printer issues.
Try disconnecting from network In some cases, LAN-connected printer, seemingly broken by the Mac OS X update can restored to normal operation by simply disconnecting the device from the network then re-connecting it.
"Communicator Error" -- try power cycling If you receive a "Communication Error" message when attempting to print after updating to Mac OS X 10.4.5, the first workaround you should try is power cycling the printer, as well as disconnecting then re-connecting it to the Mac.
Connecting directly to the Mac If you are having printer problems and are using an external USB hub, try connecting the printer directly to your Mac.
One reader who had success with this method writes:
"Unfortunately the update to Mac OS X 10.4.6 has eliminated the ability to use my Lexmark Z600 series USB printer on my iMac G5 20" iSight (rev C).
"I resolved the problem via the following: I unplugged my external USB hub and plugged the printer directly to my computer."
Disconnect from AirPort and reset For those who are using printers connected to an AirPort Express, Extreme or another wireless device with USB connections, you might want to try the following:
Disconnect the printer from the AirPort unit (or other router)
Wait a few minutes
Plug it back in
Restart the base station unit
Check for your printer to appear in AirPort Admin Utility (located in Applications/Utilities)
Print one copy In some cases, using print one copy instead of the standard print command can result in elimination of crashes that occur during printing.
Try IP printing instead of AppleTalk Some Macs are unable to see AppleTalk printers that are located on the local AirPort (or other wireless) network. Several users have been able to workaround this issue by using IP printing instead of AppleTalk.
Last resort -- Archive and Install As a last resort, try performing the somewhat tedious Archive and Install process, then re-upgrading to Mac OS X 10.4.7. This has solved some otherwise inexplicable printer issues for MacFixIt readers.

Can't print from mac book pro to Ricoh Aficio MP C4500

Hello, today i started working in a new office, that uses a Ricoh Aficio MP C4500 printer and everyone in the office uses windows computers. I have a Mac Book Pro 2.26 GHz Intel Core 2 Duo, on it, I am running Mac OSX 10.6.6.
When I have tried to print several different file types such as .pdf, .doc, .txt, etc. the printer prints out usually 20 pages that are all coded or blank and nothing similar to what i printed out. I'm guessing this is due to the printer not understanding the language of the data i send to it.I know that i am successfully connecting to the right printer.
I've visited several webpages that discuss how to fix the issue but none of them have worked.
I have tried downloading the mac osx 10.5 drivers from the Ricoh website(they didnt have 10.6) that didn't work and when i printed i still got all blank/coded pages.
Next I went I tried typing the the printer IP address to my browser url... that didn't help.
Next I went to the apple website and downloaded all of their mac osx 10.6 ricoh aficio drivers and when i printed i got all blank/coded pages again.
next i went and downloaded the "ghost script" "footmatic" and "pxlmono" and when i printed i got all blank/coded pages again.
all of the other webpages gave no other advice. Also, when printing each time i tried all of the different protocols, that didnt make a difference.
if you can advise, it would be much appreciated! Thanks!
-Nick

nnelson10 wrote:
When I have tried to print several different file types such as .pdf, .doc, .txt, etc. the printer prints out usually 20 pages that are all coded or blank and nothing similar to what i printed out. I'm guessing this is due to the printer not understanding the language of the data i send to it.I know that i am successfully connecting to the right printer.
It sounds like the printer does not have the optional PostScript module installed.
Next I went to the apple website and downloaded all of their mac osx 10.6 ricoh aficio drivers and when i printed i got all blank/coded pages again.
The drivers that are available from the Ricoh web site or are available from Apple only work when the PostScript module is installed.
next i went and downloaded the "ghost script" "footmatic" and "pxlmono" and when i printed i got all blank/coded pages again.
After you downloaded and installed the Ghostscript, Foomatic-RIP, and pxlmono drivers, did you delete your existing Ricoh print queues and create new print queues? Did you choose the driver that had pxlcolor in the title?
If the pxlmono/pxlcolor drivers do not work properly for you, you will need to have the IT person tell you what printer languages the printer can use. Alternatively, you can print a configuration page from the printer keypad that will print a sheet telling you what languages it can use.

Can't print from MAC on network

HP PSC 1410 connected to a Lenovo running Windows Vista. Printer is shared on the network. Print job from MAC gets into print queue on Vista machine. Status goes from Spooling to Printing but then goes to Error - Printing. Can print from other Windows machines on the network.

Hello @jerseyjim119!
Thank you for posting on the HP Forums!
From what I understand it sounds like you are trying send the print job from the Mac to the printer shared through the Vista computer. From what I can find you can only share the printer with a Mac on the network using USB into a AirPort Express or AirPort Extreme Base Station. Do you have your printer plugged into one of those Base Stations? Here is a link regarding Setting Up Your HP Printer on a Network with Apple AirPort.
I am unable to locate any other way to share this printer on the network through a Windows operating system to a Mac computer and I am not too sure if that connection is supported. For any further assistance I recommend contacting our phone support. Please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

HT1338 can I upgrade from MAC OS 10.5 to 10.6 ?

I have an apple desktop from 2007-2008 (I think) and need to upgrade from MAC OS X Version 10.5.8 to 10.6 Anyone know if I can do this?

http://support.apple.com/kb/SP575
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
You may need to change the country.

Can't Print )@*$ from Mac and CS3 ...

But can print perfect from my PC. Does anybody have even a general idea of what's going on here?
If I print from Corel on my PC all photowork comes out perfect ... if I print from Adobe CS3 Illustrator or InDesign from my mac to the same printer I get all these lines coming through. I don't even know where to begin to fix this.
Any help at all will be appreciated - Thanks in advance -Charlene

But can print perfect from my PC. Does anybody have even a general idea of what's going on here?
If I print from Corel on my PC all photowork comes out perfect ... if I print from Adobe CS3 Illustrator or InDesign from my mac to the same printer I get all these lines coming through. I don't even know where to begin to fix this.
Any help at all will be appreciated - Thanks in advance -Charlene

Can I upgrade from Mac OS X 10.0 directly to 10.4 on my iMac G3?

can i go from 10.0 directly to 10.4 on my G3, and will the install affect the 9.2 that coexists currently w/10.0? i have a hp inkjet working under 9.2 that i don't know will work w/10.4 and i would like to continue to have it available(i do have the mac install disc from hp which i believe will work w/osx).

You will need at least 256mb of RAM to run Mac OS X 10.4 (512mb or more is better). You'll also need sufficient free space on the hard drive. Be sure to install any required firmware before doing the update; I don't know your specific G3 iMac model, but here's a list.
http://docs.info.apple.com/article.html?artnum=86117
Going from 10.0 to 10.4, it may be better to use the "archive and install" option rather than upgrading the existing installation. This gives you a fresh Mac OS X 10.4 System, rather than updating the existing System. Existing data, including the 9.2 System Folder will be preserved. It should not affect your ability to restart from that Mac OS 9.2 System Folder.
As a precaution, you should do the following. Back up your critical data. When you start up from the 10.4 Installation Disk, at the first Installer screen, go up to the menu and run Disk Utility. Use both the Repair Permissions and Repair routines (First Aid tab) on the internal drive.

Can't Print from Mac 10.9

I was able to print from my Apple computers to a networked HP DeskJet 3050a until recently. Now the computers cannot find the printer. I can still print from a windows computer on the same network. I have ran software updates and am current on everything. Does anybody have any ideas here or any updates from HP or Apple to solve printing to HP networked printers?

Try restarting your router. If that does not work, reset the printing system:
- Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT3669 lexmark x6500 can scan page from mac

Similar Messages

Maybe you are looking for