HT3669 This article doesn't tell me what the new software adds to my printing capabilities. Does anyone know why there's a software update and what it does?
Does anyone know?
Not specific to Lion. Most of those printer updates state:
This download includes the latest printing and scanning software for OS X Lion and Mac OS X v10.6.
However, you'll not find out what's been improved, added, or fixed.
Similar Messages
-
I recently got the iPhone 4S and for some reason the Settings button for the home screen has a little red 1.If anyone know why their is little red number1 and what I have to do it would be fantastic! Thanks :)
Hallo. I did it this several times and I have the latest update to iOS 6.0.1, but still the red mark 1 at the Settings icon. Do you have any other idea?
Thank's. -
I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?
Zach Doody wrote:
itunes says i cannot update the phone as it is in recovery mode.
That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
Restore it. You don't have a choice at this point. -
I installed new software updates, and now when I try to open up pages it tells me "Pages cannot be opened because of a problem." does anyone know what I can do?
1)Copy this below from --{code} to --{code}
--{code}
set p2l to "" & (path to library folder from user domain)
set the_cache to p2l & "Caches:com.apple.iWork.fonts"
tell application "System Events"
set maybe to exists disk item the_cache
if maybe then delete disk item the_cache
end tell
if maybe then
display dialog "I deleted the file :" & return & the_cache
else
display dialog "The file :" & return & the_cache & return & "was unavailable !"
end if
--{code}
2) Than open Applescript Editor in your applications and paste it
3) Than select "Compile"
4) Than select "Run" -
How do you close apps you hve looked at with the new software update?? You used to have to double click the home button and the apps would come up to delete bu that doesn't happen anymore.
The apps in the multitaskbar should appear like pages on the whole display. To close them, just swipe from the bottom to the top. you can select single apps for closing, when you swipe them like you would swipe your homescreens.
-
What is going to be on the new software update?
what is going to be on the new iphone software update?
nathanfromwarrington wrote:
what is going to be on the new iphone software update?
Whatever Apple announces at WWDC.
Per the terms of use we agreed to when signing up for these forums, speculation is not allowed. -
Hi, thank you for helping me! Every time I plug it into the USB port of my computer, there is an image on my iPod touch that shows a USB cord and tells me to plug it into iTunes, but it is completely unresponsive. I have tried holding the home and power buttons simultaneously for 15 seconds, and that does not do anything either. Any ideas? Thank you so much!
Do you remeber the exact (or close to it) wording of the error message?
Try manually placing the iPod in Recovery mode and then try to restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have an iPod or computer problem. -
My IPOD touch 4th gen screen does not display. The software seems to be working and itunes recognizes the device. I have restored it and reset the IPOD several times but the screen is still black. What can I do to fix it? your help is very much appreciated. I do not have access to an apple store since I am stationed in Afghanistan.
If you restored to factory defaults/new iPod (you did not say the type of restore your performed) and are still having the problem that indicates a hardware problem. An appointment at the Genius Bar of an Apple store is in order..
-
downloaded ios7 & now cannot add events to my calendar, they do not appear on screen. SIRI tells me that they are there but I cannot see them. Advice pls?
In your calendars app, click the calendars button below and check if all the calendars are selected. Also click the search button on top(magnifying glass) and see if the events are listed.
-
I am trying to hook up my iPhone 5 to my Onkyo TX-8050 receiver and it is not recognizing the phone. It recogized my phone prior to software update 7.1.2 and I can use an iPhone 4 and iPad with no issues. Is there a setting I need to apply for the reciever to recognize?
Im presently on the Phone with Apple the Lady Im talking to understands its the id and not the password. I finally got somebody that listened to me. Wow and she is plesent to talk to.
-
i need to know whether or not i will still be able to get my contacts back if i reset my phone to factory specifications
If they are synced to iCloud and appear on icloud.com, they will reappear on your phone when you sign back into your account. As a precaution, you could use an app like My Contacts Backup to back them up before you restore if you wish. I would also recommend as a precaution that you import your camera roll photos and videos to your computer before restoring, as explained here: http://support.apple.com/kb/HT4083.
-
help
"You can call 1 800-MY-APPLE and order it. They will then email you a redemption code that you can redeem in the App store. The price is the regular 29.99 which is a bit cheaper than the USB installer."
https://discussions.apple.com/thread/4136680?start=0&tstart=0 -
Everythig looks fine when i charge the battery but when it goes to the Apple icon it blacks to either a black screen or a blue screen. I just want it to get fixed asap. thank you
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?
Dear Lawrence Finch:
If you're still around I hope you see this message, as you're the FIRST person (after reading every link, thread, other sites, apple support articles, etc.) to mention JB may be causing this iTunes popup window to REPEATEDLY occur:
"The iPhone software update server could not be contacted."
No, I did not hack anything (are you kidding? Grannies don't hack!), but I unknowingly bought a 3Gs iOS 3.1 from ebay that was not advertised as JB. Since it is like brand new, I was going to keep it (because my old backup is iOS 3.1.2) & was trying to simply restore & update, which (I thought) would remove the JB (that's what everybody says at forums, etc).
Instead, after "erasing all settings/content" (inside phone's Settings to get the prior person's name out of there), it is now stuck in White Apple Mode.
Put it in DFU/Recovery Mode & connect to iTunes but that stupid above message keeps appearing & I have already read/tried EVERYTHING to get rid of that message, starting with:
1. OLD phones (3Gs) with OLD iOS 3.1+ should work FINE with OLD Mac (iBook) with OLD OSX (Tiger 10.4.11) with OLD iTunes (9.2.1[5]). So that can't be the problem.
Here's all the other things apple & others say to check which I already checked:
2. USB ports are FINE, both work FINE, so that's not the problem.
3. No "extra USB devices" are connected, ONLY a mouse, & then the phone (yes, I tried it w/o the mouse connected but that didn't help).
4. No "usb hubs."
5. Latest iTunes for this OSX has already been DL'd (iTunes 9.2.1[5]). If you know of a newer one for this OSX, please advise.
6. No antivirus software.
7. No security software.
8. No routers; only 1 comcast modem, period. Wired Ethernet.
9. No wifi gadgets, no wifi at all.
10. No firewalls, except what is on iBook in the SHARING/System-Prefs. section. It's turned OFF.
11. Did the hosts/terminal thing sudo nano whatever it was. There were only 3 lines, NO gs.apple.com:
xxxxx local host
xxxxx broadcast host
xxxx local host
Oh, & btw, ATT officially unlocked this phone (after I filled out their online forms) but I can't finish the process via iTunes to get their Confirmation that "Device is Now Unlocked," so I can use T-Mo.
So that's it. If you have any other ideas of what to do from here, since from your comment, maybe it's the stupid JB on this phone that is causing the problem (???), please advise.
Many thanks! -
Brand new Mac Pro, downloading new software update and the loading bar turned grey (from blue) and stopped loading hasn't moved in an hour. What do I do?
It's been over three hours since anything has happeend. Is this normal for a software update? Can someone please help. Do I restart?
Maybe you are looking for
-
Repeated Charges for auto-renew
Hello, Let's try this again. I have been charged 8 times today for autorenew @ $10 ea. I checked with PayPal and the charges are real. How do I contact Skype to get this reversed? I don't see anywhere to do it from within the app or the Web site.
-
Sent or replied to emails are not being saved in mailbox
My sent emails or the replies to emails sent to me are not being saved in my mailbox. The "sent" box is empty. What is happening and where can I find a copy of the emails I sent and the replies I sent? Thanks.
-
Why are some of my websites not loading all the way after loading 7.0.1?
I upgraded to 7.0.1... CNN, eBay, webemail, banjohangout.org (modal windows script needs files from widget) and some other websites do not open properly . I am running XP 32. I upgraded Radeon x1600 video drivers upgraded to v. 8.593 (10.2). Troubles
-
Flowable form not flowing to second page - flowing to top of first page
The content on my Dynamic flowable form flows to the top of my initial, first page, instead of the second page. I have created a form where the subforms are set to flowed, flow direction is either Top to Bottom or Western Text and the "Allow page bre
-
Content vendor is not defined.
Hi, all. When I try to create a Delivery Unit from the Quick Launch in the Information Modeler, the following error message is shown: Cannot create Delivery Unit as content vendor is not defined for this system. Then, I found the 'content_vendor