HT3669 What about Epson Stylus C42?!

I can't locate a download for my old, but good, Epson Stylus C42.  It's not on the Apple List, but also not on the list of drivers not available.  Am I missing something or just need to give up and get a new printer?  Thanks!

Based on the page below, it looks like Epson stopped supporting this printer for the Mac a long time ago.
Given that, and given Apple's lack of support, I suspect it's time ...  as you suggest.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 14403&prodoid=21643927&infoType=Downloads&detected=yes&platform=OSF_M_X8

Similar Messages

  • HT3669 What about Kodak printer/scanners?

    I see nothing on the list of supported printers/scanners for Kodak products. What's up with that?

    The list is just the drivers that Apple has been provided with from the vendor so that they are available via Software Update. It is not a "only these printers are supported" list. So you probably just need to check the Kodak web site for a supporting driver for your particular model.

  • My epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

    my epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

    Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
    Credit for this solution to ASC user Yuengdog1983.

  • What the *+ৠis wrong with my Epson Stylus SX100?

    It was working fine in Snow Leopard up until a couple of hours ago.
    When I tried to use it a few minutes ago it suddenly won't print any more.
    It makes like it's about to print - the driver starts up etc, but then shuts down again without printing.
    What's gone wrong ? Don't tell me to delete the printer in System Prefs and then select it again. I did that already. Don't tell me to reinstall the driver. I did that too. Don't tell me to reboot, run scripts, etc. Did all that.
    FWIW here's what the Console says:
    Nov 23 16:00:27 unknown-64-b9-e8-ba-88-00 sandboxd[968]: rastertoescp(960) deny file-write* /private/var/spool/cups/Library
    Nov 23 16:00:28 unknown-64-b9-e8-ba-88-00 PrinterProxy[962]: .sdef warning for argument 'FileType' of command 'save' in suite 'Standard Suite': 'saveable file format' is not a valid type name.
    Nov 23 16:00:28 unknown-64-b9-e8-ba-88-00 PrinterProxy[962]: Error loading /Users/MY NAME/Library/ScriptingAdditions/YouHelper.osax/Contents/MacOS/YouHelper: dlopen(/Users/MY NAME/Library/ScriptingAdditions/YouHelper.osax/Contents/MacOS/YouHelper, 262): no suitable image found. Did find:\n /Users/MY NAME/Library/ScriptingAdditions/YouHelper.osax/Contents/MacOS/YouHelper: no matching architecture in universal wrapper
    Nov 23 16:00:28 unknown-64-b9-e8-ba-88-00 [0x0-0x55055].com.apple.print.PrinterProxy[962]: PrinterProxy:
    Nov 23 16:00:28 unknown-64-b9-e8-ba-88-00 [0x0-0x55055].com.apple.print.PrinterProxy[962]: OpenScripting.framework - scripting addition "/Users/thomasmuirhead/Library/ScriptingAdditions/YouHelper.osax" declares no loadable handlers.
    Nov 23 16:00:29 unknown-64-b9-e8-ba-88-00 EPSON Printer Monitor[969]: Initializer-based scripting additions have been deprecated. Please update this addition: "/Users/MY NAME/Library/ScriptingAdditions/YouHelper.osax"
    All offers of help accepted !

    (later)
    I had a brief online chat with the guy at Epson and then he sent me an email, which said....
    *START OF WHAT THE EPSON GUY SAID*
    In response to your query if you are having communication problems, firstly I suggest to check the cable connections and ensure the printer is connected directly. Also please ensure that the data cable is no longer than 1.8m. Next try deleting the printer from the Print Centre. Reinstall the printer driver from the CD that came with the printer. Restart the Mac.
    Then you will need to add the printer to the printer list, selecting Epson USB as the printerport. Click Page Setup, choose All. Please try printing again.
    If the issue is not resolved I advise you to try the printer on a different computer to see where the fault lies.
    *END OF WHAT THE EPSON GUY SAID*
    I did all of the above (allowing for the fact that the Epson guy was using "Windoze" language.
    It still won't print.
    The annoying thing is that it was printing fine a few hours ago.
    So maybe you're right, Peter - maybe I just need to leave it off for a while and see what happens!!! I can't think of any other options.
    Has anyone else experienced anything like this?
    It appears to be something in the coding in Snow Leopard. Every time I hit the "Print" button I get a console message that says
    sandboxd[1700]: rastertoescp(1696) deny file-write* /private/var/spool/cups/Library
    Can any of you Unix gurus interpret this piece of code and tell me what's wrong please?

  • I use the Epson Stylus Pro 3800. What is the printer profile to use in the "color management" tab?

    I use the Epson Stylus Pro 3800. What is the printer profile to use in the "color management" tab?

    See http://forums.adobe.com/message/4483587#4483587

  • HT3669 how do you get your epson stylus photo r 2400 to work on 10.8.3

    how do you get your epson stylus photo r 2400 to work on 10.8.3?

    According to:
    https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=54861&infoType=Dow nloads&platform=OSF_M_X8
    Description: The latest Mac OS X printer driver for your Epson product is available only via Apple's Software Update. Here's how to get it:
    Connect the printer to your Mac and power the printer on.
    Select the (apple) menu, then Software Update.
    Follow the on-screen instructions to install the available updates.
    Note: Software Updates may find multiple updates for your system. You may choose to install all or some of the updates by clicking on Show Details.
    Compatible Systems: Mac OS X (v10.8.x)
    If there is no software to update try adding it manually
    System Preferences --> Print & Scan  --> Click Button --> Select Printer
    Let me know if this works -

  • The part "scanner" of my all in one printer epson stylus photo PX 720 WD is not on duty and no driver ready to use some informations about drivers epson and mavericks ?

    some news for drivers os x mavericks and epson stylus photo px720wd ?
    the part "printer" is ok
    the part "scanner" is of duty because no driver found
    thanks

    Try using the pre installed Image Capture app in your Applications folder.
    Connect the scanner to your Mac whether Wi-Fi or USB.
    Launch Image Capture.
    Click the very small black box bottom left side of the Image Capture window.
    You'll see this pop up menu:   Connecting this (device) opens:
    You can select a default app to scan (Image Capture) and select a folder from the Imort To pop up menu on the right to save scanned files to.

  • Printing in LR4: what printer profile must be use when using an Epson Stylus Pro3800?

    Please help. Thank you.

    The printer profile should be something like <Epson Stylus 3800 Epson Ultra Photo Paper Luster>; in other words the profile has to be specific for your printer AND the paper you are using for this specific print.
    Your printer came with several profiles for Epson paper. If the paper you are using is not among them, or if you are using a non-Epson paper, you have to download the icc profile for this paper from the paper manufacturer's website, and after downloading it you have to install it. Some profiles are compressed files; these have to be un-compressed (un-ZIPPed) before installation.

  • What's the best driver for an Epson Stylus Photo R260 printer?

    After the last couple of driver updates for Mavericks, my printer won't print just black although it is using the black ink to shade colors darker. I previously used another driver but didn't buy it after the trail period was up but now I'm getting desperate. Unfortunately, I can't remember that driver's name. Does anyone have a suggestion for a driver for an epson stylus photo r260 inkjet?

    How are you trying to set the print to just black? Are you setting the color to Grayscale under Print Settings in the Print window?
    Should be the same for the 260 as the 280. 

  • Can't scan with Epson Stylus DX4450

    Hi everybody.
    I'm trying to configure my Epson Stylus DX4450. Printing works like a charm, but scanner is not. I tried to configure it as it was suggested on various websites. I've installed sane, xsane, iscan (from http://repo.archlinux.fr/i686) also I've downloaded iscan-plugin-cx4400 from Avasys website, extracted it with rpmextract ant put the library to /usr/lib/iscan.
    When I try sane-find-scanner it shows:
    # sane-find-scanner will now attempt to detect your scanner. If the
    # result is different from what you expected, first make sure your
    # scanner is powered up and properly connected to your computer.
    # No SCSI scanners found. If you expected something different, make sure that
    # you have loaded a kernel SCSI driver for your SCSI adapter.
    found USB scanner (vendor=0x04b8 [Language Error], product=0x083f [Language Error]) at libusb:002:010
    # Your USB scanner was (probably) detected. It may or may not be supported by
    # SANE. Try scanimage -L and read the backend's manpage.
    # Not checking for parallel port scanners.
    # Most Scanners connected to the parallel port or other proprietary ports
    # can't be detected by this program.
    # You may want to run this program as root to find all devices. Once you
    # found the scanner devices, be sure to adjust access permissions as
    # necessary.
    When I try scanimage -L it's idle for about a minute and then it shows:
    No scanners were identified. If you were expecting something different,
    check that the scanner is plugged in, turned on and detected by the
    sane-find-scanner tool (if appropriate). Please read the documentation
    which came with this software (README, FAQ, manpages).
    But when I try it again it shows:
    device `epkowa:libusb:002:010' is a Epson flatbed scanner
    Then if I try sane-find-scanner again it will show no language errors:
    found USB scanner (vendor=0x04b8, product=0x083f) at libusb:002:010
    xsane will check for available devices for some time, then it shows a message, that no device is available. iscan shows a message "Could not send command to scanner. Check the scanners status". Sometimes iscan will launch, but I can't scan, because it will show me the "Could not send..." error message.
    Device usually turns off when I try xsane. Two times xsane launched, but Epson turned off right after it. It also turns off sometimes when I try sane-find-scanner second time or when I try to launch iscan.
    I read that there can be a conflict between sane and gphoto, moved /etc/udev/rules/54-gphoto.rules and restarted udev - still didn't work.
    /etc/sane.d/dll.conf:
    # enable the next line if you want to allow access through the network:
    net
    abaton
    agfafocus
    apple
    avision
    artec
    artec_eplus48u
    as6e
    bh
    canon
    canon630u
    #canon_pp
    cardscan
    coolscan
    coolscan2
    #dc25
    #dc210
    #dc240
    dell1600n_net
    dmc
    epjitsu
    #epson
    #epson2
    epkowa
    fujitsu
    #gphoto2
    genesys
    gt68xx
    hp
    hp3900
    hpsj5s
    hp3500
    hp4200
    hp5400
    hp5590
    hpljm1005
    hs2p
    ibm
    leo
    lexmark
    ma1509
    matsushita
    microtek
    microtek2
    mustek
    #mustek_pp
    mustek_usb
    mustek_usb2
    nec
    niash
    pie
    pint
    pixma
    plustek
    #plustek_pp
    #pnm
    qcam
    ricoh
    s9036
    sceptre
    sharp
    sm3600
    sm3840
    snapscan
    sp15c
    #st400
    #stv680
    tamarack
    teco1
    teco2
    teco3
    #test
    u12
    umax
    #umax_pp
    umax1220u
    v4l
    # The following backends are not included in the sane-backends distribution
    # If you want to use them, download them from their webpages and read their
    # documentation
    # HP OfficeJet backend homepage: http://hpoj.sf.net/
    # Uncomment the following line if hpoj is installed:
    #hpoj
    hp_rts88xx
    #hpaio
    /etc/sane.d/epkowa.conf:
    # epkowa.conf -- sample configuration for the EPKOWA SANE backend
    # Copyright (C) 2004 Olaf Meeuwissen
    # See sane-epkowa(5), sane-scsi(5) and sane-usb(5) for details.
    # SCSI scanners can be configured simply by listing the path to the
    # device. For example, if your system claims to have a /dev/scanner
    # SCSI device, all you have to do is uncomment the following line:
    #/dev/scanner
    # In the interest of maintainability, most installations would have
    # /dev/scanner sym-linked to the real SCSI scanner device node.
    # An alternative way that works for many operating systems and is a
    # little bit more generic, is to have the backend probe for your SCSI
    # scanner with the following configuration command:
    #scsi EPSON
    # On systems with libusb, the following line is sufficient to get the
    # backend to recognise your USB scanners. It presumes, however, that
    # the scanner---more precisely, it's USB product ID---is known to the
    # backend.
    # For all USB scanners that are officially supported by this backend,
    # this presumption is true. A list of such scanners can be found in
    # sane-epkowa(5).
    usb 0x4b8 0x83f
    # For any USB scanner not known to the backend (yet), you may, at your
    # own peril(!!), force the backend to recognise and use it via libusb.
    # You can do so by the following configuration command:
    # usb <USB vendor ID> <USB product ID>
    # SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes). In order
    # to find the USB product ID, use lsusb(1) or, on Linux systems, peek
    # at the information in /proc/bus/usb/devices.
    # A sample configuration for the Perfection 1650 (GT-8200), which has
    # a product ID of 0x0110, would look as follows:
    #usb 0x04b8 0x0110
    # When not accessing your USB scanner via libusb, you may need to use
    # one of the configuration commands below or commands that are almost
    # the same. These commands typically access the scanner via a kernel
    # scanner module.
    usb /dev/usb/scanner0
    usb /dev/usbscanner0
    usb /dev/uscanner0
    # Linux had a scanner module until version 2.6.2. As of version 2.6.3
    # libusb is your only option. Linux' scanner module can be loaded via
    # the modprobe(8) command like so:
    # modprobe scanner vendor=<USB vendor ID> product=<USB product ID>
    # If the scanner module already knows the vendor and product IDs, you
    # do not have to specify them. If you want to have this done automa-
    # tically every time you boot, you can add the above line, except for
    # the modprobe command itself, to your /etc/modules file.
    # Although not tested with this backend, parallel port scanners should
    # be usable. You can configure them as shown below, but I do not know
    # much about the details. Information is welcome.
    #pio 0x278
    #pio 0x378
    #pio 0x3BC
    /etc/udev/rules.d/53-sane.rules (shortened):
    # This file was automatically created based on description files (*.desc)
    # by sane-desc 3.3 from sane-backends 1.0.19 on Fri Mar 7 06:29:43 2008
    # udev rules file for supported USB devices
    # To add a USB device, add a rule to the list below between the
    # LABEL="libsane_rules_begin" and LABEL="libsane_rules_end" lines.
    # To run a script when your device is plugged in, add RUN+="/path/to/script"
    # to the appropriate rule.
    # The following list already contains a lot of scanners. If your scanner
    # isn't mentioned there, add it as explained above and mail the entry to
    # the sane-devel mailing list ([email protected]).
    ACTION!="add", GOTO="libsane_rules_end"
    ENV{DEVTYPE}=="usb_device", GOTO="libsane_create_usb_dev"
    SUBSYSTEM=="usb_device", GOTO="libsane_rules_begin"
    SUBSYSTEM!="usb_device", GOTO="libsane_rules_end"
    # Kernel >= 2.6.22 jumps here
    LABEL="libsane_create_usb_dev"
    # For Linux >= 2.6.22 without CONFIG_USB_DEVICE_CLASS=y
    # If the following rule does not exist on your system yet, uncomment it
    # ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0664", OWNER="root", GROUP="root"
    # Kernel < 2.6.22 jumps here
    LABEL="libsane_rules_begin"
    # EPSON Stylus CX4300 | EPSON Stylus CX4400 | EPSON Stylus CX5500
    # EPSON Stylus CX5600 | EPSON Stylus DX4400 | Epson Stylus DX4450
    ATTRS{idVendor}=="04b8", ATTRS{idProduct}=="083f", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"
    # The following rule will disable USB autosuspend for the device
    ENV{libsane_matched}=="yes", RUN+="/bin/sh -c 'test -e /sys/$env{DEVPATH}/power/level && echo on > /sys/$env{DEVPATH}/power/level'"
    LABEL="libsane_rules_end"
    Can anyone help with this?

    Almost solved.
    First I've copied files extracted from iscan-plugin-cx4400.rpm from /usr/lib/iscan to /usr/lib/sane. Didn't work.
    Then I've checked version of iscan with yaourt and it appeared that aur have newer version than the one from archlinux.fr repo. I've built it, moved epkowa.conf.pacsave to epkowa.conf and it worked once.
    sane-find-scanner output was the same, with language errors, but scanimage -L showed that it found my scanner (don't have the exact output - it was different than before). xsane still didn't found the device but I managed to preview and scan to file printer test page with iscan.
    When I tried it for the second time, sane-find-scanner output was the same, but scanimage -L didn't recognised the scanner. iscan didn't work. Tried to restart the device - still the same.
    Tried to turn off the scanner, restart udev, start scanner again. Didn't work.

  • I can't get good prints from my Epson Stylus Color 1160 now I have OS10.4.4

    My previous Mac was a PowerMac 8600/250 with OS9.1. Since I have had the new iMac G5 the prints I get from my Epson Stylus Color 1160 (which was working OK with OS9.1) have a poor colour match with the on-screen image and are too dark. The printer interface offers far less options than were available with OS9.1. I have downloaded the latest driver from Epson. I even found an alternative driver on the internet called GutenPrint 5.0.0bz2. When I tried to install that I was told that a newer version was already installed. I have tried all variations on the driver settings but none of the results are anywhere approaching satisfactory. I have spoken to Epson but they were not able to solve the problem. I mainly work in Photoshop CS2 so I spoke to Adobe about the problem but it still wasn't resolved. Does anyone have any suggestions of what else I can try?

    When you were printing in OS 9, did you print in CMYK or RGB profiles?
    If your printing directly in Photoshop, try, I think its "RGB 1956" profile. Good luck and let me know if this helps.

  • FIX for EPSON Print CD V2.02 - EPSON Stylus Photo R200 - MAC OS 10.5.9

    I thought I'd post this ridiculously long info sheet on what finally got my R200 to work with EPSON Print CD and 10.5.8 just in case it might help someone else BEFORE they spend days searching for a solution.
    Check the printer driver information in System Preferences, Print & Fax. If it says anything other than EPSON SP R200 Series, you’ve likely located the problem. My system showed the Gutenprint v5.1.3 and /or CUPS/+GIMP... I originally replaced the Gutenprint driver file with the CUPS... file thinking this would solve the Gutenprint driver problem. But, as I continued to look into what was going on, I think I found out that both driver files are actually considered Gutenprint driver files.
    1. Select the hard drive where the operating system is located.
    2. Select Library/Printers.
    3. Select the Epson folder and delete it and then Empty Trash to make sure it’s gone.
    4. Select Library/Preferences.
    5. Select the Epson folder and delete any files that are there.
    (Steps 4 & 5 might not be necessary, but I’m listing everything that I did.)
    6. In System Preferences, select Printers and Fax. Control click in listing area and select Reset Printers.
    7. Load the Leopard Installation CD and select Optional Installation.
    8. Select Printers and select Epson. This will reload the printer drivers for all the EPSON printers that are included on the install CD.
    9. Go back to the System Preferences, Printers and Fax window. Click on the + sign to add a printer.
    10. There will likely be a listing with Printer Name as EPSON Stylus Photo R200, Kind as USB.
    11. Click on an arrow in the Print Using: box and select EPSON SP R200 Series. The printer icon changed dramatically at this point, with a rainbow of colors on the document shown coming out of the printer.
    Note: **Working within the Print & Fax app seems to be key to getting the settings corrected.** Someone else pointed out that they also found this necessary. However, I couldn’t get the proper “Print Using:” option to appear until I cleaned out the Library/Printers/Epson folder, “Reset Printers”, and reloaded the EPSON printer drivers from the Leopard installation CD.
    I had previously done the “Reset Printers” and reloaded the printer files, but as was advised against in the post I mentioned, I selected the “More Printers” option. That’s where I found the EPSON Stylus Photo R200 listed with the CUPS+Gimp ... and the Gutenprint driver listing options. Selecting what appeared to be the Gutenprint alternate printer driver didn’t help at all. I’m not sure if the EPSON SP R200 driver file was missing from the original listing of printer drivers or if I just missed it. I certainly would have looked for it if I had known it was the one that’s needed.
    12. Open the EPSON Print CD V2.02 app. Although I had already installed the Easy Print update, I got a message saying that the application needed the update to work. So, I reinstalled the Easy Print update.
    13. After reinstalling the Easy Print update, I reselected Update Printer Information. Much to my amazement, I got a message and a progress indicator showing the Printer Information was being updated to reflect the EPSON Stylus Photo R200 printer.
    14. When the Update Printer Information process had completed, I clicked on Print and suddenly found that I was able to choose Select Printer and pick the EPSON Stylus Photo R200 and CD/DVD wondrously appeared in the Media Type.
    After this point, all the other instructions that are provided from EPSON seemed to work just fine.
    Hopefully, there’s enough information in here somewhere that people with other operating systems and printers might at least be able to get a clue . . .

    I dug around on the Epson site and found this which seemed to address the exact problem so they obviously know about it. Unfortunately even these rather drastic steps failed to solve the issue for me.
    http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-Photo-2100/D rivers-Support?target=article&extn=.html&articleId=3798

  • Photoshop elements 10 not printing to Epson Stylus 9800

    I am running photoshop elements 10 on a windows 8 computer and trying to print to my Epson Stylus 9800 and everything is coming out almost black. I can print color graphics from the web perfectly but no luck with elements. Does anyone have any ideas about what I can do to fix it?

    Did it ever work properly?
    Do you have the latest drivers for the printer?
    Try to print a test page from the printer itself to check that all colors show up.

  • Epson Stylus Photo RX680 with Bluetooth Photo Print Adapter 2 won't pair

    This post describes my problem, but I couldn't reply since it has been archived:
    http://discussions.apple.com/thread.jspa?messageID=7882399&#7882399
    I am having the same issue with an Epson Stylus Photo RX680 and their Bluetooth Photo Print Adapter 2. I go to System Preferences -> Bluetooth -> Set Up New Device, click Continue, select Printer, and click Continue. At this point, the Bluetooth Setup Assistant sends me to the Print & Fax System Preferences window. I can add the printer under the Bluetooth heading. It finds the drivers and adds the printer to my printers list, but a test page (or anything else) won't print. The job is added to the queue, but it stops trying to print after a few seconds. If I go to the Bluetooth System Preferences, I can see the printer listed (for a while), and I notice that it is connected but not paired.
    If I run the Bluetooth Setup Assistant and select Any Device instead of Printer, I see the printer in the list and can view the Passkey options. It is set to "Use a specific passkey", which is what I need. I have tried changing it to a different option and then changing it back, but it does not seem like this has an effect on how the printer is paired. I have never been asked for a passkey when attempting to add this printer, and I suspect that this is why I cannot print to it.
    I have also tried enabling and disabling Bluetooth sharing, and this does not seem to have an effect, whether "require pairing" is checked or not. Isn't there some place where I can choose "Pair this device" once it has been discovered? I find it strange that I can connect to it but have no option to pair afterward (at least that I can find). To make the matter more complicated, the printer disappears from the device list in the Bluetooth System Preferences after about 30 seconds, so I have to remove the printer and reinstall it in order to see the it in the list again.
    I am able to print to this printer using bluetooth from a Windows XP machine, so I don't think that there is a problem with the adapter. I am also able to print to this printer using USB, so I don't think that there is a driver problem. I believe (though I certainly could be wrong) that the issue is that the device is not paired. Can anybody help?
    Thank you.
    -Kyle

    I was trying to find a way to use the Epson drivers because the Gutenprint drivers don't support duplexing or feeding out of the front tray on this printer, but at least this got bluetooth printing working. I downloaded the latest Gutenprint drivers (5.2.2), ran the uninstall program first to get rid of the old drivers, and then installed the new ones. I added the printer through the bluetooth heading in the Add Printer dialog, and I selected the RX680 Gutenprint driver (which was not available with the default OS X 10.5.5 installation). Once again, the printer showed up as connected but not paired in the Bluetooth System Preferences, and it disappeared from the device list after a few seconds, but printing works now. The print quality for this printer is much improved by the new drivers as well.
    Bluetooth setup is mentioned in the user documentation. It's kind of a joke:
    Macintosh computer: Double-click Bluetooth File Exchange in your Utilities folder and follow the on-screen instructions.
    That's it. I have been disappointed with this printer on a number of occasions. If you are going to connect directly through USB, then it's probably fine. If you want to use any form of network connectivity, you had better be running Windows on any machine involved.
    I'll talk with Epson support to see if I can get any further with their drivers. Since it's supposed to work, I'd like to see if I can get it to happen. Otherwise, I'll return the adapter and share the printer through a spare desktop.

  • Illustrator cs4 and Epson Stylus R2880 printing problems

    I am having printing problems.  I am trying to print from my cs4 to my epson stylus photo printer r2880 and am having problem with my picture getting cut off on the left side when I print.  The print screen looks perfect but when I go to print, it always cuts off the left edge and the bottom.  I tried playing with the x and y's but have no idea what I am doing.  Does anyone have this combination of cs4 with the R2880 printer and can help me solve my problem?

    Hi Wade,
    I have tried playing around with that but I am not sure what I am doing.  Here's what it is set at.
    On my drop down print screen, i have the size set as US Letter (Sheet Feeder Borderless (retain size).
    When I check the 'fit to page' button it actually puts a bigger white boarder around it.  The fit to page number says (96.4706%).  Shouldn't it say 100%?  If I leave it as do not scale I still have a small border around it.
    I am not sure about the xy settings.  When I have it to 'fit to page' it is:
    Top left corner (0,0)  Top right corner (0,0)
    Bottom left corner (0, .1632)  Bottom right corner (0, .1632)
    If I have do not scale button clicked:
    Top left corner (0,0)  Top right corner (0,0)
    Bottom left corner (0, -.225)  Bottom right corner is (-.3, -.225)
    Do these settings look correct?  If not, what should my setting say and how can I set it without the setting changing back everytime I open this window.
    Thanks for responding,
    Celeste

Maybe you are looking for