HT3669 which driver should i use for the epson LX300 matrix-dot printer??

which driver should i use for the epson LX300 matrix-dot printer??? I dowloaded all drivers for epson but i didn't find the driver for the LX300.
I bought an i mac not so long ago, can anyone help me about this?

i use parallels desktop 7 because i use a program for work with windows XP. Is there really no solution?

Similar Messages

Which driver should I use for Oracle RAC .....

We are using Weblogic 8.1 sp2 and Oracle RAC (9.x). Which driver , I should
use : i.e.
type 2 Orcle thin driver
or
type 2 Oracle OCI driver
or
type 4 oracle thin driver
or
Jdrivers
or other which is best for this configuration .
Sanjeev

Thanks. I was unaware of that forum.
Joe
Galen Boyer wrote:
On Tue, 06 Jul 2004, [email protected] wrote:
Galen Boyer wrote:
Joe, I have always suggested that people use the OCI driver
unless it won't suffice based on distribution requirements.
How come you choose the thin driver? Oracle will generally
fix the OCI driver before the thin and the OCI driver will
give far superior performance when dealing with LOBs.We have actually had faster response getting thin driver fixes
than OCI-based fixes. Thats interesting. I'll take note of it.
The 10g driver works with RAC, is much faster than previous
drivers, and is easier to install etc. OCI users are often
hopeful about TAF, which is broken and less-than-useless for
active complicated JDBC applications. OCI problems can bring
down the whole JVM and are harder to debug.
These are from reading the results and recommendations of
Oracle Corporation, Tom Kyte and other Oracle professionals.
Have you research to say different? I'd like to see it,
because up until now, I've always suggested OCI first unless
the client doesn't have an oracle client installation
available.Tom does an excellent job from the DBMS perspective, but I
don't see him often in the jdbc arena.His Q&A site is littered with jdbc examples. He also will call
on people in specific expertise to help him answer questions.
Here an example of that where he show the OCI driver to be much
more performant.
http://asktom.oracle.com/pls/ask/f?p=4950:8:9561536906412728184::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:1004630777647,

Which jdbc driver should be used for sqlserver 2000 and where to put it.

hi all,
My odi is 11g. I met the error infor "Could not load JDBC driver class [com.microsoft.sqlserver.jdbc.SQLServerDriver]" when i tried to connect to a sqlserver2000 database.
The questions are:
1. which jdbc driver should be used for sqlserver 2000?
2. which folder to put it in?
3. how to set the physical topological "Microsoft Sql Server" to use this jdbc driver?
failed tries:
i downloaded the driver "SQL Server 2000 Driver for JDBC Service Pack 2" and put it in the following folders:
1. .../oracledi/drivers, and set this path to CLASSPATH.
2. .../oracledi/userlib didn't exist, i created it and put the driver in.
3. .../oracledi/agent/dirvers, in which a readme file exists and told me to put drivers in this folder.
All these works were not useful. when I start odi.sh and try to connect to sqlserver2000 database, the same error infor came up.
my environment is:
os: Linux 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
java: Java(TM) SE Runtime Environment (build 1.6.0_13-b03) Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02, mixed mode)
ODI: 11g, installed in /users/oracle/odi/
please help me,thanks a lot.
jun
帖子经 Jun编辑过

Hi,
You should check which JVM version is required by that version of the driver, I think the 2.x versions require a 1.6 JVM
What error are you getting? If it is the "com.sunopsis.sql.c: No suitable driver", it indicates it can't find the jar file (sqljdbc.jar) for the driver you specify.
Drivers folder in ODI 11g is under
C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers.
if you are using the standolone version
On windwos :
C:\Documents and Settings\<userName>\Application Data\odi\oracledi\userlib
on linux
$HOME/.odi/oracledi/userlib
Have a read of :- http://download.oracle.com/docs/cd/E14571_01/core.1111/e16453/install.htm#CHDBIFAJ
Thanks,
Sutirtha

Which Image should we need for the below model router 2951 to support 4 Byte ASN number ?

Hi All,
Which Image should we need for the below model router 2951 to support 4 Byte ASN number ?
CISCO2951/K9
Cisco 2951 w/3 GE 4 EHWIC 3 DSP 2 SM 256MB CF 512MB DRAM IPB
PWR-2921-51-AC
Cisco 2921/2951 AC Power Supply
CAB-ACSA
AC Power Cord (South Africa) C13 BS 546 1.8m
HWIC-BLANK
Blank faceplate for HWIC slot on Cisco ISR
ISR-CCP-EXP
Cisco Config Pro Express on Router Flash
MEM-2951-512MB-DEF
512MB DRAM (1 512MB DIMM) for Cisco 2951 ISR (Default)
MEM-CF-256MB
256MB Compact Flash for Cisco 1900 2900 3900 ISR
SM-S-BLANK
Removable faceplate for SM slot on Cisco 290039004400 ISR
SL-29-IPB-K9
IP Base License for Cisco 2901-2951
S2951UK9-15501T
Cisco 2951 IOS UNIVERSAL
EHWIC-1GE-SFP-CU
EHWIC 1 port dual mode SFP(100M/1G) or GE(10M/100M/1G)

> Can someone suggest ?
a forum is no realtime-communication ... ;-)
For the ISR G1, it was supported from 12.4(24)T, so I would assume that your ISR G2 has this feature if you are running 15.x.
EDIT: The Feature-navigator says that it's supported starting with 15.1(2)T.

Which listener should be used for JTextArea

Hi,
I need to add a listener for JTextArea particualy when
the text in the jtextarea is changed. I don't think
mouse listener is enough, since the user can use tab to
get to the jtextarea and edit the text. In this case,
which listener should I use. Sample code would be
helpful.
In addition, I have a problem with the jtextarea that
when user uses tab to go to different gui components,
such as jtextfield, jcombobox, jtextarea, jlist, etc, the
tab stays in the jtextarea and keeps appending to it. It does
not go to next component, such as jlist. How can I make it
work?
Thanks in advance,
Pin

It doesn't work. Are you using 1.4 or 1.3? I am using
1.4.
In the 1.4 API, it says that isManagingFocus is
"Deprecated".
Here is what I have:
JTextArea descrptArea = new JTextArea() {
public boolean isManagingFocus() {
return false;
descrptArea.setRows(3);
descrptArea.setLineWrap(true);
descrptArea.addKeyListener(new KeyAdapter() {
public void keyTyped(KeyEvent e) {
// DO SOMETHING
I found the following code which says it will do it.
However, I got the exeception:
java.lang.ClassCastException:
n: javax.swing.KeyStroke
at java.util.TreeMap.compare(TreeMap.java:1081)
at java.util.TreeMap.put(TreeMap.java:459)
at java.util.TreeSet.add(TreeSet.java:205)
Set forwardTraversalKeys = new TreeSet();
forwardTraversalKeys.add(KeyStroke.getKeyStroke('\t'));
forwardTraversalKeys.add(KeyStroke.getKeyStroke(KeyEven
.VK_TAB,
InputEvent.CTRL_MASK));
textArea.setFocusTraversalKeys
(KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS,
forwardTraversalKeys);
Set backwardTraversalKeys = new TreeSet();
backwardTraversalKeys.add(KeyStroke.getKeyStroke(KeyEve
t.VK_TAB,
InputEvent.SHIFT_MASK));
backwardTraversalKeys.add(KeyStroke.getKeyStroke(KeyEve
t.VK_TAB,
InputEvent.SHIFT_MASK |InputEvent.CTRL_MASK));
textArea.setFocusTraversalKeys(
KeyboardFocusManager.BACKWARD_TRAVERSAL_KEYS,
backwardTraversalKeys);
Any idea???
PinI'm not using 1.4 but the class cast exceptions look like they come from : Set forwardTraversalKeys=new TreeSet() etc
try : TreeSet forwardTraversalKeys=new TreeSet()
you cant cast from a Set to a TreeSet because a TreeSet is a Set but a Set is NOT a TreeSet.
hope this helps.

Which operator should i used for loading not matched records

HI ALL,
I am just evluate OWB tools.
and i met a question.
I need to join two tables A and B with Condition A.id=B.id
For example,
A has 1000 records, and B has 100 records,
what i need to do is
(1) to get matched 100 record from B to a new table C,
(2)to get the not matched 900 records from A to another table D.
By the requirement like above, which operator could i use for?
I tried to use joined but can not get the record of (2).
Thanks for your attention.
Regards

Hi,Sutirtha
Thanks for your attention.
because joiner has only one output group.
so what you mean is use joiner operator twice?
One joiner userd to get the matched records,
and the other used to get unmatched records?
Thanks
Rachel

What external Hard drive should I use for Final Cut Pro?

Hi:
I have a Mac Pro and I'm planning to work with HD. What external hard drive should I use?
PD: I have a NVIDIA on a PCI Express graphic slot.
Thanks,
Cabezon

You'll need to be much more specific; there are 20 or 60 different kinds of high definition. Some require nothing, some require superfast RAID, some require specialized hardware support.
bogiesan

HELP - which driver should I use?

Hi,
          We are developing an application using WebLogic 6.0 in conjunction with
          TOPLink 2.5.1 for object/relational mapping (manages the persistence
          layer). We would like to configure our application to use WebLogic's
          connection pools and I would have a few questions regarding the driver I
          should use.
          Here's a short description of our application:
          Our service layer is entirely composed of container managed stateless
          session beans. On the TOPLink side, the transactions are manipulated by
          a UnitOfWork object, which gives the control over the distributed
          transaction to an external transaction controller. Our WebLogic external
          transaction controller uses the UserTransaction interface to manipulate
          a transaction (begin/commit/rollback). So, within an EJB method
          execution we might have several units of work begin and 'commit'
          transactions, but the overall transaction is really committed only at
          the method exit, by the external transaction controller.
          This works, without using connection pools. The problem is, if we don't
          use connection pools for every SQL executed, a new connection is created
          and authenticated against the Oracle Server, which is terrible for
          performance. However, when I tried to configure a WebLogic connection
          pool, it doesn't work anymore (by using the non-XA OCI driver the
          connections from the pool were used, but never released back to the pool
          after the transaction was being committed).
          My questions are:
          1. Given that our transactions are manipulated through JETS, is it
          correct to use the JTS Oracle driver, which comes with the WL6.0
          installation?
          Driver Classname: weblogic.jdbc.jts.Driver
          URL: jdbc:weblogic:jts:myOracleInstance
          2. If we should use the JTS Oracle driver, should I specify the pool
          name in the Oracle URL?
          3. What is the difference between jdbc20 and jdbc? Is the first one
          deprecated?
          Thank you,
          Brenda.
          [att1.html]


Hi Sriram,
          Thank you very much for your help.
          I used the datasource configuration as you suggested and it almost
          works. It is noticeable faster than before,
          but the problem now is that I am getting the following exception when
          loading the sixth object into the database.
          I do not understand why it is the sixth object, because I created the
          Oracle connection pool with a maximum of
          10 connections.
          Here's the exception I get:
          Creating user numbers: from 2461 to 2500
          Create User testuser2461
          Create User testuser2462
          Create User testuser2463
          Create User testuser2464
          Create User testuser2465
          Create User testuser2466
          Caught unexpected exception. Reason:
          weblogic.transaction.internal.AppSetRollbackOnlyException
          at
          weblogic.transaction.internal.TransactionImpl.setRollbackOnly(TransactionImpl.java:403)
          at
          weblogic.transaction.internal.TransactionManagerImpl.setRollbackOnly(TransactionManagerImpl.java:242)
          at
          weblogic.transaction.internal.TransactionManagerImpl.setRollbackOnly(TransactionManagerImpl.java:236)
          at
          TOPLink.Public.JTS.WebLogic.WebLogicJTSSynchronization.rollbackGlobalTransaction(WebLogicJTSSynchronization.java:140)
          at
          TOPLink.Public.JTS.AbstractSynchronizationListener.beforeCompletion(AbstractSynchronizationListener.java)
          at
          weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:500)
          at
          weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:70)
          at
          weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:877)
          at
          weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:1203)
          at
          weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:158)
          at
          weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:203)
          at
          com.imoney.service.userManagement.UserServiceBeanEOImpl.createUser(UserServiceBeanEOImpl.java:478)
          at
          com.imoney.service.userManagement.UserServiceBeanEOImpl_WLSkel.invoke(UserServiceBeanEOImpl_WLSkel.java:114)
          at
          weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
          at
          weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:128)
          at
          weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
          at
          weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:103)
          at
          weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          --------------- nested within: ------------------
          weblogic.transaction.RollbackException: Unknown reason - with nested
          exception:
          [weblogic.transaction.internal.AppSetRollbackOnlyException]
          at
          weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1248)
          at
          weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:208)
          at
          weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:203)
          at
          com.imoney.service.userManagement.UserServiceBeanEOImpl.createUser(UserServiceBeanEOImpl.java:478)
          at
          com.imoney.service.userManagement.UserServiceBeanEOImpl_WLSkel.invoke(UserServiceBeanEOImpl_WLSkel.java:114)
          at
          weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
          at
          weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:128)
          at
          weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
          at
          weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:103)
          at
          weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:17)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          >> This works, without using connection pools. The problem is, if we
          >> don't use connection pools for every SQL executed, a new connection
          >> is created and authenticated against the Oracle Server, which is
          >> terrible for performance. However, when I tried to configure a
          >> WebLogic connection pool, it doesn't work anymore (by using the
          >> non-XA OCI driver the connections from the pool were used, but never
          >> released back to the pool after the transaction was being
          >> committed).
          >>
          >> My questions are:
          >>
          >> 1. Given that our transactions are manipulated through JETS, is it
          >> correct to use the JTS Oracle driver, which comes with the WL6.0
          >> installation?
          >> Driver Classname: weblogic.jdbc.jts.Driver
          >> URL: jdbc:weblogic:jts:myOracleInstance
          >>
          >
          > Don't use the weblogic.jdbc.jts.Driver. The java.sql.Driver interface
          > is getting deprecated in favor of the DataSource interface.
          > Instead, configure the pool and a datasource to "wrap" the pool, as
          > follows:
          > <JDBCConnectionPool
          > Name="testPool"
          > Targets="myserver,server1"
          > URL="jdbc:weblogic:oracle:foo" 
          > DriverName="weblogic.jdbc.oci.Driver"
          > InitialCapacity="1"
          > MaxCapacity="10"
          > CapacityIncrement="1"
          > Properties="user=scott;password=tiger;server=foo"
          > />
          >
          > <JDBCDataSource
          > Name="poolDS" 
          > Targets="myserver,server1" 
          > JNDIName="moneyDS" 
          > PoolName="testPool" 
          > />
          >
          >
          > At run-time, instead of doing DriverManager.getConnection(), call
          > jndiContext.lookup("moneyDS") to get a DataSource object. Call
          > getConnection() on it.
          >
          > This is faster and much more thread-savvy than the DriverManager code.
          [att1.html]

Which driver should I use

I am considering to use a native JDBC driver instead of the JDBC-ODBC bridge. The reason for that is that I need an improvement in performance on select statements. Deletes, inserts and updates are not important.
Does anybody know what kind of improvement in performance I could expect when using a native JDBC driver? I'm using both Oracle 8i and MS SQL Server 2000 as databases, but I'm most interested in the performance improvement for SQL Server.
Has anybody tried for instance Microsoft's "own" JDBC driver?

MSs Jdbc Driver still requires Jdbc-Odbc bridge.
Just go thru the URL,
http://www.weblogic.com/docs/techsupport/faq/jdbckona_m
sqlserver.html#bridge
Hope this helps.
SudhaThanks for the URL, but I think this page does not refer to the beta-JDBC driver which MS has made available recently. For instance it says that Microsoft's driver is a type 2 driver, while in reality it is type 4.
Misja

Which EBO should be used for employee absence data.

Hi,
We have the employee absences records in oracle ebiz which should be polled and send to a file.We have to implement this using AIA.Can anyone please tell me which EBO is used for this purpose.
Thanks.

Hi,
I have the same requirement. Can you suggest which EBO did you use finally?
Regards,
Neeraj Sehgal

Need Help regarding which Material Type to use for the Scenario

Hi,
Here we are configuring the service scenario.
Suppose Electric Switch of customer flat is not working.
Here in this case I will purchase the switch. And along with service order
I will do the delivery of the Material. Then will raise the Invoice to the customer
with service charge as well as material cost.
Here I will have to run the MRP also for that material to raise the PR if stock goes below
the reorder point.
So I will have to maintain the Purchase view, Sales View & MRP view to that Material.
So in this case which standard material Type can I use for this material? Or I have to create
our own material Type for this material.
Regards,
Pradip

ROH is usually a material type that is supposed to be consumed in production.
HALB is a semifinished good, own produced and meant to consumed in production.
Both are usually not forseen to be sold.
A material that you buy yourself and sell to a customer is a trading good, which is HAWA in SAP.

What does the password stored in the JAGENT wallet do, and what JAVA_HOME should I use for the pw_agent_util.sh command?

I am configuring the GoldenGate Plugin for OEM. There is a step to create the wallet. The documentation is not clear about the role of the password supplied. If I run the JAGENT as oracle user, should it match the password for the oracle user, or is this password separate? Also, should I use the OEM agent jdk for the JAVA_HOME setting?
./pw_agent_util.sh -jagentonly

Pat,
Morning. Good to see that someone is working on using the plug-in for GoldenGate within OEM12c.
If you are using the plug-in 12.1.0.2, you will be much better off with reporting on GoldenGate processes. In order to get the 12.1.0.2 plug-in to work, the JAgent 12.1.3.0 is needed and can be downloaded in the Oracle GoldenGate Monitor distribution (Configuring Oracle #GoldenGate Monitor Agent | DBASolved) . If you are using the old plug-in 12.1.0.1, then the JAgent is embedded with the GoldenGate software (Oracle GoldenGAte (11.2.1.0.1 and later) and Oracle Enterprise Manager 12c | DBASolved). I recommend taking the new plug-in!
Now to address you question about the password. The password is stored in the wallet under the GoldenGate home ($OGG_HOME/dirwlt) and is used directly for the JAgent to login to the EMAgent and communicate with OEM. The user name associated the password is configured in the $JAGENT_HOME (different depending on version, look for Config.properties). Then in OEM, the username defined in Config.properties and the password in the wallet needs to be provided before OEM will pick up the GoldenGate targets.
The $JAVA_HOME setting depends on the version of JAgent you are going to run. The JAgent 12.1.3.0 using JDK 1.7 or higher. The embedded JAgent using JDK 1.6.
Thanks
Bobby

Which value should I send for the field "business partner type " in DTW

I need your help. I am trying to create a new business partner using DTW. Please let me know wich possible values should I send to DTW for the field "Business Partner Type" (this label appears on sap-bo when enteringa new BP).
The database field name is OCRD.cmpprivate, so I tried to find the related field in the input file and I found "CompanyPrivate" is this the corresponding field for the "business partner type"?
I have been trying with the following values but the DTW fails with the error "invalid item name in enum BoCardCompanyTypes":
tYES
tNO
cCompany
cPerson
I
C
cI
cC
Thank you for your help
Jorge Manzo

Please note: I use DTW Version 88.1.7; API Version 8.81.319
To set CmpPrivate (it is exactly BoCardCompanyTypes) use following:
cCompany - Card represent a company.
cPrivate - Card represent a private person.
To set CardType see Godon's replay.
A lot of info you can find in "SAP Business One SDK - Help Center" docs.
Thanks,
Grzegorz

Which ID should I use for Family Sharing?

My family has the same iTunes ID (is this now called an iCloud ID??) so that we were able to share music. We logged into iTunes on our computers and our iphones with all the same iTunes ID. We all have different Apple IDs and logged into our computers and iPhones with that ID. How do I implement Family Sharing so that we still have the OLD music and shared app?? And which email address do I send the invitation?

Hi gottalovemymac,
When you join a family, you'll be asked to confirm the Apple ID that you regularly use for making iTunes, iBooks, and App Store purchases. Purchases from this account will be shared with your family members.
That from
Sharing purchased content with Family Sharing
It has more details too on setting up Family Sharing.
You might also want to see
Family Sharing
Best Regards,
Nubz

What criteria should I use for the monthly updates

I am just starting to setup Software Update for SCCM 2012 R2. The configuration is done with the Classifications and Products selected and working. I selected the Classifications:
Critical Updates
Definition Updates
Security Updates
Service Packs
Update Rollups
Updates
Now I am just looking for the criteria to use for my Software Update Groups.
I watched this GREAT VIDEO "SCCM 2012 SP1 and the new way handling Software Updates explained", URL:
http://technet.microsoft.com/en-us/video/sccm-2012-sp1-and-the-new-way-handling-software-updates-explained.aspx regarding the "new way" we are to be doing the groups and updates. The video is
very informative and explains a lot, but it does not say what criteria is used.
This is the breakdown from the video, but again it doesn't say what criteria may be:
• Keep Software Update Groups (SUG) Limited to 1,000 updates
• Don't split products into different SUG's
• Enabled Delta replication for the Software Update Points (SUP)
• Set High priority for the Software Distribution Group
Software Update Groups
• Exceptions group (not to deploy)
• TMG Definition Updates
• SCEP 2012 Definition Updates
• Outlook Definition Updates
• 2003-2010_All Updates
• 2011_All Updates
• 2012_All Updates
• 2013-01_All Updates
• 2013-02_All Updates
Deployment Packages
• TMG Definition Updates
• SCEP 2012 Definition Updates
• Outlook Definition Updates
• 2003-2010_All Updates
• 2011_All Updates
• 2012_All Updates
• 2013_All Updates
Automatic Deployment Rules
• Microsoft Outlook 2010/2013 Definition Updates
  ○ Run after synchronization
• Monthly Updates
  ○ Every Month on day 16 of the month
  ○ Uncheck "Enable the deployment after this rule is run
• SCEP 2012 Definition Updates
  ○ Run after synchronization
• TMG Definition Updates
  ○ Run after updates
I am specifically looking mostly for the Monthly updates and to make sure they are only those needed. Most I have seen use:
Superseded: No
Expired: No
Bulletin starts with "MS"
I don't really know what the "MS" limits things to. Sorry a lot of information and not very clearly laid out.
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

I am specifically looking mostly for the Monthly updates and to make sure they are only those needed. Most I have seen use:
Superseded: No
Expired: No
Bulletin starts with "MS"
I don't really know what the "MS" limits things to.
I use a similar approach, as one part of my routine.
When you filter/search on Superseded=NO, that discards the updates which are flagged as superseded, but this depends totally upon your routine and understanding of the nature of supersedence, and it's also time-sensitive, since CM12 will by default, kill off
superseded updates after a time. A Superseded update *is* deployable, but you'd likely only do that, if the superseding update is unsuitable for your environment for some reason, e.g. it introduces a bug or regression that you can't afford.
Expired=NO, well, again that's to limit your filter/search results. Since an expired update is not deployable, why bother to have it in your results list, if you are building a deployment. It's handy to know that something is, or has become, expired, if
you are troubleshooting or analysing a "why did/didn't xyz happen?", but for deploying, expired updates are just useless clutter.
Bulletin starts with "MS" can be handy to filter out the "non-security" updates, since "security" updates are always issued with an MSyy-nnn bulletin ID.
Note that the bizarre MS definition of "security update" does not mean that security bulletins cover *all* security-related updates, since there are updates that are released, which do provide security fixes, enhancement, etc, but they don't always attract
a security bulletin ID, so it really pays to look at "starts with MS" and also "does not start with MS" - I use both, when searching/filtering, as a way to slice the assessment/analysis task in "half" (not evenly sliced ;).
And also note that some updates (security advisories, hotfixes, rollups) may not fall into the classification you might expect, or, might not be published into the MU/WSUS catalog feed at all..
An example of a unexpected classification, is the recent 2917500, which is classified under "Feature Packs", even though it is an updated set of revoked root certificates (due to yet another compromised root CA cert). [I noted you didn't mention the Feature
Packs classification, you might want to revisit that choice...]
Personally, I'm not yet using ADRs, not because I don't like them, but because our security ops team are being especially painful at the moment and keep changing their mind about stuff, plus, we are undergoing a massive application change cycle and the change/release
team are hypersensitive just now.
One method I also use, is to periodically run the "updates needed but not deployed" report, as it reveals to me where I need to sync a new product, or have overlooked an update or misunderstood/incorrectly assessed as "we don't need that, or that doesn't
apply to us". it also reveals where I have mucked up and not been diligent about taking a templated approach to deployments, e.g. if I forget to distribute to all DPs or whatever.
I find that even though I might take what I consider to be a very generic approach, others in the forums clearly have different environments/operational models to me, and different needs. For patching, I mainly focus on Windows client OS and Office,
and not really on Windows server OS, since somebody else handles server builds and patching in my org.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

HT3669 which driver should i use for the epson LX300 matrix-dot printer??

Similar Messages

Maybe you are looking for