HT3669 Why are Dell printers not supported?

I have three printers and a Windows laptop and a Macbook.  I cannot connect the Dell printer to my Macbook due to now drivers from Dell or Apple.  I realize this is more of a Dell issue, but is there another driver I can use for the Dell AIO 944 printer?

http://www.dell.com/support/drivers/us/en/04/Product/dell-944
I see no Mac support for that product.

Similar Messages

  • Why are these Webservices not supported in VC ?

    Hi all,
    I am using NW04s SP9, and I plan to make MDM-Application with VC.
    Therefore I introduced MDM-WebService into NW and defined it on VC.
    but "searchRecords" of "MDMSearchRecords" was displayed with "Not supported"
    in the right frame .
    Mmm...
    So I decided to think from a beginning.
    [http://www.27seconds.com/Holidays/US/USHolidayService.asmx?wsdl|http://www.27seconds.com/Holidays/US/USHolidayService.asmx?wsdl]
    I defined above it on VC and I used "Getholidaydate" .
    Good! .
    However,,, "Getholidaysforyear" was also "Not supported".
    Why are these methods "Not supported" ? .
    and how will come to be usable these methods in VC? .
    Thanx in advance.
    Regards,
    k.sugimoto.

    Hi
    Visual Composer supports Web services that are compliant with the Basic Profile 1 standard of the Web Services Interoperability (WS-I) Organization (http://help.sap.com/saphelp_nw70/helpdata/en/e0/92583ab4da4b9cb524f61ba4267d25/content.htm)
    Best regards
    Vincenzo

  • HT4356 Why are Kodak printers not on this list and how can I print with my Kodak printer

    Why can I not able to print with a Kodak printer

    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • HT203088 Why are CR2 files not supported?  How do I get them to open??

    I don't know if this should go in Aperture or not.  I have some photos that I took with a Canon 5D Mark III that are .CR2 and I CAN NOT get them to open in Camera Raw.  I have updated all of my software with the exception of the adobe products.  How do I get the .CR2 files to open??? 

    Kbrian
    According to Apple the Canon 5D Mark III is supported in Aperture 3 or later
    http://www.apple.com/aperture/specs/raw.html
    I am not a Canon user - but perhaps this model also allows you to save a small  RAW file - perhaps called sRAW?
    This may not be supported by Apple
    Be aware, that although the file has a CR2 file suffix, every RAW file is unique to the model that generates it and has to be individually supported by Apple via a system level update
    Hope this helps
    Brian

  • Why are prepaid customers not supported?  Or charged extra for purchases?

    Why am I punished for being a Verizon customer trying to buy the refurb SG4? I'm on auto pay with the prepaid to double my data. I'm told I have to buy the additional $45 service, or drop the autopay so it will pay which will kill my double data. Why is it I can't get the phone for the advertised price, keep my number, and continue on auto pay without paying anything extra or losing any data?

    Holger Lindner wrote:
    Thanks Chenks. I would subscribe to your point of view if the new AppleTV were an upgrade,
    the new appletv is an "upgrade" in terms of that it is a new device to replace the original appletv.
    it may not be an upgrade in terms of what you wanted, but it still is there to replace the original appletv.
    as an early adopter you should always be aware that something better and cheaper is likely to be around the corner and that your early adopter investment will start to look poor. that's just the way it goes with any device.
    Holger Lindner wrote:
    Just thought of another counter-argument: my 2008 iMac is still running on the "old" platform but iTunes 10 and TV Show rentals work there as well ? How ?
    flawed analogy really.
    itunes 10 is a stand-alone application and has it own refresh cycle.
    eventually you'll find that itunes itself will no longer support PowerPC apple systems, and that's just the way it goes (i'm actually surprised that apple do still support PowerPC for anything!).

  • Why are iphones now not support godaddy email?, why are iphones now not support godaddy email?

    why despite numerous attempts on numerous iPhone, does Apple not longer support Godaddy email accounts? 
    I have followed the proper methods described in Godaddy to no avail.  At this point it is clearly an Apple issue.
    Any help is appreciated. 

    Which "proper methods" have you used exactly?
    These?
    http://support.godaddy.com/help/article/8311/automatically-setting-up-email-on-y our-apple-mobile-device
    http://support.godaddy.com/help/article/3423/iphone-setting-up-email

  • When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

    When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

    TLCMediaDesign wrote:
    I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
    IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
    When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary.

  • Why do iPhones/iPad not support Flash Player/Java and what are my alternatives for browsing sites using these plug-ins?

    Why do iPhones/iPad not support Flash Player/Java and what are my alternatives for browsing sites using these plug-ins?

    There are also iSwifter, Photon, Skyfire, etc., some only support Flash some support Java and Flash.
    Adobe never made a version of Flash for iOS and closed their mobile flash division a couple of years ago. You can get Flash on other personal devices but you will be using a 2 year old version that has not been patched for security vulnerabilities.
    When the original iPhone was released Mr. Jobs said it would never run Java as it was old technology and a security risk. Nothing has changed since.

  • Why are HP Printers disposable?

    I am posting this here to express my concern over the level of quality in the HP printers that I have bought.  
    As the owner of at least 4 HP ink jet printers in the past 5 years, I can assure you that their shelf life is poor.  I have had to replace them all in under 2 years (not to mention 2 from other family members)
    Today, I have finally had it - the final straw!  
    I continue to get Ink System Failure errors despite trying every recommended proceedure to fix the problem.   Not to worry, I will check my warranty on the HP support website.....only to find out that it expired (bought this 2 years ago)!  This leads me to the final option of buying another part which I refuse to do.  It is insulting to buy parts for a product that fails in such a short period of time.  
    The next thing I plan to buy is from the HP competition!
    So, I ask you.....Why are HP Printers essentially disposable?

    You will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work.  HP's web page on the subject is here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Disc Burner. Why are some files not readable or writeable?

    Hello,
    I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
    "The operation cannot be completed because some data cannot be read or written.
    (Error code - 36)"
    Followed by the choices: "Stop" or "Continue".
    I have a bad feeling that my startup disk is too small but I am not sure.
    Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
    Here are the specifications:
    Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
    I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
    I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
    Here is my process (I hope I am doing this right - I am new at this):
    1. I first insert a blank DVD-R
    2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
    3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
    Why would some files not be readable or writeable?
    4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
    "Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
    However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
    Am I doing this the right way?
    Why are some files not "readable or writeable" as it indicates in the error message?
    Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
    Thanks

    To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
    Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
    Thanks Kappy

  • Why are my pictures not sending in imessage?

    Why are my pictures not sending in iMessage?

    Check out this support document http://support.apple.com/kb/ht4221

  • HT1665 Why are my contacts not listed ?  They used to be there.

    Why are my contacts not listed?  They used to be there.

    I had the same thing happen to me.  It's a bug in iPhoto 9.4.2.
    The first time you run iPhoto after upgrading to iPhoto 9.4.2, it "updates the iPhoto library".  This sometimes tickles a bug where iTunes can see all your iPhoto albums, but iTunes thinks they are empty.  Since iTunes thinks all your albums are empty, it dutifully deletes any photos from your synced iOS devices.
    It's easy to tell if this is the problem you are seeing.  Open iTunes and go to the photos sync panel for one of your iOS devices.  If you have multiple albums checked, but iTunes shows a total of 0 photos, then you have the problem.
    I spent an hour with an Apple Genius.  he couldn't find any mention of this problem in their internal support system.  His recomendation was to reinstall the operating the system.  I suspect that this won't solve it.
    The only solution I have found is to restore iPhoto 9.4.1 and the corresponding iPhoto library from your backups.
    I would refrain from upgrading to iPhoto 9.4.2 until Apple has a fix for this issue.

  • I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

    I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

    To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
    Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

  • Why does apple tv not support amazon prime?

    why does apple tv not support amazon prime?

    If you have an iPhone/iPad it may be possibel to 'Airplay' from teh Amazon Prime app on the device - no Amazon Prime in UK so I can't confirm it works.  Check reviews of the app in iTunes.  Airplay is not something I like much as you have to have another device to work with the AppleTV.
    As to why there is no native support for Amazon Prime on the AppleTV itself, we could ask the same for any number of services, but:
    1 - Apple/Amazon are competitors to some extent so they may not want to
    2 - It may simply not feature in Apple's plans for the device
    3 - Rights owners may not allow Apple/Aamzon to collaborate
    .....and dozens more possible reasons I suspect, none of which really make sense to you an I as a consumer...

  • Why the iPod does not support Thai language

    Why the iPod does not support the Thai language? iTunes supports it. If I drag a song with ID3 tags into my iPod the title becomes blank. If I remove the ID3 tags the title displays but the enconding of the characters are inccorect.

    Why the iPod does not support the Thai language?
    The languages supported by the iPod are listed in detail in its tech specs:
    http://www.apple.com/ipod/specs.html
    Hopefully future versions will expand the list to included Arabic, Hebrew, Thai, Vietnamese, Hindi, etc.

Maybe you are looking for