HT3697 Keynote Printing Tabloid

I am in keynote and trying to save a presentation to print as pdf for tabloid...11" x 17"....any clue how we can do this?

If you have already created the Keynote, File > Export > PDF
When printing, in the Print Dialogue box, set the paper size to 17 x 11 ins and scale to fit.

Similar Messages

Indesign CS3 & Epson r2400 not printing tabloid paper

Indesign CS3 & Epson r2400 not printing tabloid paper. MAC OS 10.5.6. Have tried all configurations of page set up 11 x17 and 8.5 x 11 spreads, custom page sizes and default paper set up. The print comes out cut off. Epson says it's an Indd problem. Very inconvenient. Got any ideas?

I'm having the same problem with IDCS3 5.0.4 and an Epson Stylus PRO 3800 on Mac OS X 10.5.6 with version 6.11 of the Epson driver. I have a 17x17 document in InDesign that I am trying to print on 17x22 paper. The paper spools a little less than half-way down and the print begins, but it prints about 1/4 of the image--it is as if it cropped at 8.5x11 at the top right corner of the image.
I have had to resort to saving the file as a high-res jpeg and printing from Preview as a workaround. Unreal.

Epson 2400 - Can't print tabloid

Having a problem in our studio right now ...
Recently installed Leopard on one of the G5's. Went to print this morning on our Epson 2400 and we cannot print tabloid - the page contents will clip at letter size. Same problem no matter what application we use ... InDesign, Acrobat, etc ...
We are using the latest driver from Epson.
Is there something we're missing here or is this a bug? TIA.

Try this!
Q: Since I upgraded to Macintosh OS X 10.5 Leopard, some printer driver options are missing. What should I do?
A: Make sure you’re not using the Macintosh OS X 10.5 Gutenprint driver. Follow these steps to check if you’re using the Gutenprint driver and change it if necessary:
From the Apple menu, select System Preferences.
Click Print & Fax.
If necessary, click once on your printer’s name in the Printer list. (You don’t need to do this if only one printer driver is installed).
If you see Gutenprint next to your printer name, go to step 5 to change the driver. (The Epson Stylus Photo RX620 appears in the example below, but you’ll see your printer or all-in-one name instead).
If you see only your printer’s name, you’re using the correct driver, and you can skip the remaining steps.
Turn off the printer.
Click the button to remove the printer from the Printers list, then click OK.
Go to the Macintosh Leopard Support page and select your printer or all-in-one from the appropriate list.
After you select your printer or all-in-one, the web page will either inform you that the driver for your model is included in Mac OS X 10.5 or give you a description and download option for an Epson driver for your printer.
If the driver for your model is included in Mac OS X 10.5, go to the next step. Otherwise, download and install the Epson driver for Mac 10.5 before continuing with step 8.
From the Apple menu, select System Preferences. If necessary, click Print & Fax.
Turn on the printer. Your computer should add the printer automatically.
If your computer does not add the printer or if it adds the Gutenprint driver again, contact Apple for assistance. You may need to reinstall the Epson drivers provided with Macintosh OS X 10.5.
Note: To check ink levels, click the Utility button, then click EPSON StatusMonitor. The Supply Levels button will not show remaining ink levels for your Epson printer.

I can't print tabloid 11x17 on my 9650 deskjet, help!

need complete install software for hp9650 that works with windows 7, I cant print tabloid 11x17 help

Hi,
A Windows 7 full software is not available for your product.
As described below, you should use the Deskjet 9800 as alternative driver according the provided steps:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01796821&lc=en
*If the printer is connected by USB, make sure to set the port as USB001 and not as LPT as mentioned above.
By adding the driver, i could verify a Tabloid paper size is available within the 9800 options.
If you facing any unique behaviour while trying to print with this media size, please clarify the exact response.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can't print tabloid on Canon iR C2620 printer...

Here are my specs:
I have a 24" iMac (purchased about a month ago) running the latest version of Leopard and the Adobe CS3 Suite.
I am printing to a Cannon iR C2620 ImageRunner networked printer.
I can no longer print tabloid sheets on this printer from the CS3 Suite (Acrobat, Illustrator, InDesign, Photoshop)
I can, however, print tabloids to a Phaser 7300 color printer from CS3.
Makes no sense. I could print everywhere fine when I was on 10.4, so I assume this is a Leopard issue, but I wanted to post here to see if this had been encountered by anyone else. It's a huge inconvenience and I have no idea how else to troubleshoot.
The Canon drivers all stop at OSX 10.4, and Leopard has a new way of handling printers (supposed to be easier...) so again, I'm stuck.
Any help/ideas would be greatly appreciated.
Thanks.

afryrear wrote:
Ok, I do have the imagePASS. I downloaded drivers for it (I think) but now I don't see them in the list of available drivers to choose from. Do I need to set it up as an Apple Talk printer?
You don't have to use AppleTalk. In a mixed environment I would recommend you use IP. The imagePASS support LPR and Port 9100, which the Windows machines will use as a default. To create the printer, select IP Printer and change the menu to HP JetDirect. Then enter the ip address of the copier, the queue will be disabled, and then for Print Using, change this to "Select a driver..." and in the search menu type 'Canon iR'. You could see the iR C3220/2620-C2 v1.x. Select this and click Add.
When I create the Apple Talk queue it selects Generic PostScript Printer for me.
Sometimes this can occur even when the driver is installed. But it could also indicate that the driver you installed doesn't match the printer/RIP you are connecting to. You can either print a config from the imagePASS to check what you actually have or opens its web page by typing its ip address into your browser.

Xerox Phaser 7300dn will not print tabloid

I have a user with an 20" iMac running 10.6.4 and Adobe CS4. In that office they have a Xerox Phaser 7300dn color laser printer. The user cannot print to tabloid paper. Everything prints on 8.5x11 paper regardless of settings. Happens in Illustrator, Photoshop, whatever. There are two older white iMacs on that same printer that are running 10.5.x, and they have no problems printing to tabloid on that same printer. I've uninstalled and reinstalled the latest drivers from Xerox. I've updated the firmware on the printer. All the options show up in the print dialog boxes. This has to be an issue with 10.6 since the other Macs running 10.5 and a PC running Windows XP don't have this problem. Anybody else experience this issue? Any fixes? I'm getting desperate.
Thanks.

I used to be able to collate just fine on my Laserjet 5000, but no longer. I, too, found that it made no difference whether I checked the box or not. Is this still another bug in 9.4.5? And yes, it is highly irritating.
David

Keynote Prints off the Page

Since upgrading to the latest version of iWork apps, Keynote now prints off the left side of the page. I've noticed that there's no place to set margins. Is there anything I can do to get them to print normally? The current work around has been to shrink it until it prints the whole thing on paper but that just looks funny with all the extra white space on the top, right and bottom.

This issue has been reported in the discussion many times, we have to hope Apple are working on a fix.

Problem printing tabloid size

Just a bit of information first:
• I'm running CS4
• Printer: Canon ImagePress C1
• Printing on a network printer, it's called Canon iPR Server Q2 V2.0 in Printers & Scanners (not sure if that's helpful)
The issue at hand:
I recently installed Mavericks. Since then, I'm not able to print from Photoshop. I could print from Illustrator (but now I can't, I'll get to that in minute). In my attempt to fix the issue, I removed the printer from 'Printers & Scanners', and readded it.
I still can't print from Photoshop (the software freezes and then quits). And if I try to print from Illustrator, I don't have any of my 11x17 (or tabloid) options. I've tried adding a custom size through Page Setup. It looks like the size shows up in my print dialogue menu, but when I print the printer chooses Letter size. I'm guessing when I removed the printer initially... some of my printing preferences/options were also removed. Is there a way for me to add these back in? Or am I looking at probably having to call a tech support/print technician? I can print the standard media sizes from Illustrator.
I've included some screenshots of what my print window in Illustrator looks like.

I'm a detailer|draftsman, using Autocad and this effects my way of earning a living. I have to spend extra time printing check drawings. I loose a lot of time with the mechanics of printing.
I have the same exasperating problem with my Deskjet 9650 (with Deskjet 9800 drivers) HP doesn't have updated drivers for the 9650. It's been a few years since I found out I couldn't use the Deskjet 9650 on MY computer.
That computer died and I now have Win7x64 on a 64 bit machine. There is still no relief!!
I use my husband's XP-Pro 32 bit machine. the only drawback is tranferring files to his machine so that I can print.
It is not a satisfactory situation.
I've come to the conclusion: NEVER to buy another HP product!

Canon Pro9000 no longer prints tabloid on Snow Leopard

Just got new 2 new iMacs w/ Snow Leopard. My partner installed software and latest drives for Canon Pro9000 on his computer. Now, when I'm on my computer and in InDesign CS5 and I try to print a tabloid size paper. However, the Indesign file prints the wrong orientation (landscape instead of portrait).
I've tried changing the Page Setup and also within the InDesign print dialog. No matter what, the file prints incorrectly.
Also, my partner tries to print a #10 envelope on my computer (Canon iP4500), the orientation is also incorrect on that.
Any thoughts on this? Printing 8.5 x 11 on either computer is not a problem. It's just when the orientation must be changed that we run into trouble.

You mention that the Pro9000 is connected to the other iMac and that when you print from ID CS5 you get the orientation issue. If you print from ID CS5 on that iMac, or if you connect the Pro9000 directly to your iMac, does the symptom still exist?
Yes, it also appears that it has to do with InDesign. I've been able to print out PDFs to my partner's printer on tabloid paper w/o a problem. My partner can print out the correct orientation from his computer to his printer.
Also, in reverse, it sounds like when the other iMac attempts to print to the iP4500 connected to your iMac the orientation issue exists. But if you print the #10 ENV, is the orientation okay?
Yes, if I print a #10 env to my printer from my computer, it is okay.
Just trying to determine if the symptom is only present when printing to the shared printer - not the direct printer.
Yes, it looks as if when the printer is shared and using InDesign CS5.

PDF's Exported from Keynote Printing Very Slowly

My team and I created a text presentation in PPT, imported it to Keypoint, and made a really nice presentation.
We have a simple BG slide, 4 graphs, a few shapes, and mostly text on 39 pages. We've exported it to a PDF that is 1.1 MB, and distributed it to clients.
We've received reports from everyone that it takes 20 minutes to print. There are long delays between each page on seemingly all printers.
Does anyone have any suggestions on how to fix this?
Thanks,
JJ

Illustrator patterns create very complex vectors. Unlike images, they cannot be compressed.
However, there you can sometimes remove some size in the PDF using Acrobat Pro's Optimizer feature. Sometimes Illustrator data that is not needed in the PDF can be removed. In Acrobat XI, that is File > Save As Other > Optimized PDF. You can use the Audit Usage to view where the PDF size comes from (which requires some experience to utilize). In the Discard User Data on the left, check Discard hidden data of other applications, and resave the PDF file.

Print tabloid size document on several letter size papers (tiling)

officejet pro 8600 on Mac 10.6.8
Can't seem to find the option to tile print.

When you press "command p", the print dialog should pop-up with a the option in a pop-up menu to select the "layout" screen which should have an sub-option to set the number of Pages per Sheet. Then you can specify how many pages you want your print out to title on.
Working for HP and here to help!

I can't get my documents on Numbers, pages, and keynote to print on a wifi printer without airprint. Any suggestions?

How would I go about making my documents in Numbers, Pages, and Keynote print on a printer that is not airprint compatable?

Either get a air printer that works with this feature or use iCloud or email. Email it to an email and print it off from a computer. Or option 2- if you have your ICloud setup, go to iCloud.com. Hit iWork. Your documents will be there to print off.

New keynote (6.5.2) produces zero-byte document when printing to pdf

I want a pdf version of a 30-slide Keynote presentation. Using the latest version of Keynote, print to pdf generates an output pdf file that is zero bytes in length. It does this whether I print all 30 slides, just one slide, etc. This is on Yosemite 10.10.1.

Hi Ben and thanks for your reply.
Just to clarify a couple of things:
Unfortunately, as I mentioned, for various reasons to do with our print profiles etc we are currently required to print to pdf rather than export. Hopefully this will change soon, but for the moment it's unfortunately not an option.
Also, MathType only allows you to save equations as either eps or gif files and, seeing as we need them to be editable in case of revisions (not to mention quality of image rendering) eps is clearly the preferable format of the two.
Essentially, we don't have a choice about these two issues, so I'm really wondering if anyone out there can shed any light on what the cause of the error may be - particularly as it's only become an issue since upgrading to CS5 and MathType 6 (from CS2 and MathType 5).
Thanks
R

Network printing slow after updating to Tiger, InDesign from OS 9 PageMaker

Sorry for the "old" OS talk, but this is "new" to this shop (a small newspaper). Long overdue, I upgraded our 8 G4s to Tiger from OS 9. They're all networked to a G5, where all files are stored (graphics mostly). This G5 was installed a year ago with Tiger and served as a file server, connected via Ethernet (and SharePoints), to the OS 9 Macs. The printer is a color copier, an Océ cm2520, and DID a great job printing tabloid pages from PageMaker 7. The pages are comprised of mostly ads saved as PDFs, and some text. The pages range in size from less than 1mb to upwards of 10mb. The printer has 500mb of storage plus a 40gb HD built-in.
With OS 9 & PageMaker, tabloid pages would come out in less than one minute, the largest might've taken 3-4 minutes (big graphics & color). Now, with Tiger & InDesign CS3, the same pages take at least 15 minutes apiece to print! And even much longer when more than one page is sent at a time. The spooling part goes very quickly, but the printer takes forever to process the jobs. Nothing else has changed other than the OS and ID CS3. I did reinstall the printer with the current-most driver but no difference. I tried PDFing the pages and printing those, and that cut the print time about in half, which is still way too long and not practical on a "production" day. Small ID files still print quickly, but these PDF-ridden tabloid pages are ridiculous.
I first thought it was ID, but now am wondering if it might have something to do with how/where print jobs are spooled in OSX. Can anyone shed some light on where print files go once the Print button is hit? Is there a secret cache/print queue that might need cleaning out? Do the spooled jobs reside on the sending Macs or on the file server? I can't imagine that this one-year-old Océ printer just went bad coincidentally at the same time as the software upgrades.
Thanks for any help with this problem!

With no insight whatsoever from the manufacturer of the copier, I reformatted the internal hard disk. Life is back to normal! Apparently these HDs get fragged just like any other, so a periodic reformatting may take care of sluggish performance. Either that or the original formatting of the internal HD wasn't "compatible" with OS X.

Need hardcore postscript help! - printing to 11x17 using psutils

Hi Archers!
I need some serious postscript help.
I'm trying to layout a document using psutils into a booklet format on 11x17 paper.
There's a laserjet 8550 here that prints tabloid 11x17.
I print the doc from openoffice to a pdf, then psbook it and psnup it into the correct format with this script:
pdftops ~/cups-pdf/job_565-RockCreek.pdf rc-pdfto.ps
psbook -s24 rc-pdfto.ps rc-book.ps
psnup -Pletter -ptabloid -2 -l rc-book.ps rc-nup.ps
Everything looks good in gv (once i set page and orientation). However I think the wrong default page and orientation in the ps file is what is causing the problem.
When I print to the printer or to a pdf it comes out on a letter size peice of paper instead of the needed 11x17 8-(
Even though I psnup -ptabloid the printed pdf still has letter:
[johnea@recube Mark]$ pdfinfo page4-11x17.pdf
PARSING /usr/share/poppler/nameToUnicode/Thai
PARSING /usr/share/poppler/nameToUnicode/Bulgarian
Producer: ESP Ghostscript 815.04
CreationDate: Sun Sep 2 09:44:03 2007
ModDate: Sun Sep 2 09:44:03 2007
Tagged: no
Pages: 1
Encrypted: no
Page size: 612 x 792 pts (letter)
File size: 599235 bytes
Optimized: no
PDF version: 1.2
Can anyone advise me how to MAKE this REALLY go on to tabloid paper?
Or perhaps even aim me at some industrial strength postfix forum somewhere?
Thanks for any help!
Arch Rocks!
android

Hello,
OpenOffice should also be able to print to a .ps-file directly, without creating a pdf-file. I don't know if this helps, but please give it a try.

HT3697 Keynote Printing Tabloid

Similar Messages

Maybe you are looking for