HT3699 only left speaker playback when narrating with USB mic

When I record using my USB mic, the audio only comes out of the left speaker; how do I fix this ????

Applications > Utilities > Audio MIDI setup > Audio Devices > Audio Output:
both channels 1 & 2 should be set at value = 1 (sliders all the way to the right)
and that mute is not checked on any channel

Similar Messages

Sound only plays in Front left speak on Windows 7 with Xfi Extreme Music??

I have Xfi Extreme Music (SB0640). In installed the lastes drivers for windows 7 (<a rel="nofollow" href="http://forums.creative.com/t5/forums/postpage/board-id/#]Creative Sound Blaster X-Fi series driver 2.8.003 [/url]), When I run a speaker test all 6 speakers work, however when I use media player, media center etc. Only the front left speaker works.
Do I need to install creative Alchemy?
Console Launchers does not load on boot
Any asistance will be appreciated
Thanks in advance

NRe: Sound only plays in Front left speak on Windows 7 with Xfi Extreme Music? You will need to have the Creative Console Launcher which will let you have CMSS-3d or Creative Multichannel Surround Sound. You can find the newest version for your card here......
<a rel="nofollow" href="http://support.creative.com/downloads/download.aspx?nDownloadId=094"]http://support.creative.com/downloads/download.aspx?nDownloadId=094[/url]
Honestly though, dont bother with just that. Get Daniel K.'s X-FI support pack which is updated with the newest drivers and applications for your card. Plus, he tweaked those with fixes for installation/integration? under operating systems other than XP.
That can be found here.......
<a rel="nofollow" href="http://rapidshare.com/files/234436040/XFI_SupportPack_2_0.exe"]http://rapidshare.com/files/234436040/XFI_SupportPack_2_0.exe[/url]
And the link is still good.

HT2995 Only one speaker works when playing music. Is this normal?

Only one speaker works when playing music. Is this normal?

This being the Mac mini forum, I naturally presumed you were asking about a mini. But in any case, there's only speaker in an iPhone as well.
Regards.

Get "using too much power" message when charging with USB

I have a 4th gens iPod Touch that appears to have a number of issues:
1. get "using too much power" message when charging with USB
2. can't re-boot
3. unable to access iCloud Backup, Ignore and Settings button inactive
4. unable to unlock unit when using the Home button to turn the unit on

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Will not recognize the Lucid LG when connected with USB

My Dell will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately. After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?

That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port. Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5
Keep us posted on any additional information/details about your issue.
Thanks,
MikeS_VZW
Follow us on Twitter @VZWSupport

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

MSi Dragon Editon 2 problems booting with usb mice

Hi to all people. I have a problem with my laptop. If i update my BIOS with versions newer tan E1763IMS.50V the laptop doesn´t boot with usb mice connected. I think i answer this in the past but with not solution and now i ask again thinking some people have a solution now.I have checked with differents EC versions and BIOS E1763IMS.50V and with all versions works fine. If i update the BIOS E1763IMS.50V with other newer BIOS the problem appears. When the pc is started and Windows 8.1 is charged i can connect the mouse and works fine too. I have checked with various mices and with all the problem appears. The only BIOS that works fine is E1763IMS.50V.
Thanks a lot for your help

I borrowed a GT70, plugged my SteelSeries Rival optical mouse and flashed with the same 50V version to the laptop. It boots & works normally.
And then I flashed to 518 version. It still boots & works normally.
So maybe your problem is not on the mouse?
Did it boot up if unplugging the mouse?

Zoom H4n Stereo Audio Plays Only Left Speaker - How to Double It?

Hello Everyone,
I've been working on a few projects and noticed that the audio captured by the Zoom H4n will preview in both speakers (and before I drag it to the timeline I can right click -> Modify ->Audio Channels and get all the options there as well as hear it from both speakers) but as soon as I drag it onto the timeline it will only play through the left speaker.
Any ideas of either where I'm going wrong or how I can double the audio? It's all already cut together so I'm hoping there's a fix that is semi-time efficient to apply lol. Thanks so much for your help,
-Karl

Glad that helped! Next time, you can use the Modify > Audio Channels command to handle this before editing. If you only have audio on the left channel of your stereo source clip, or don't care about what's on the right, you could set the stereo audio to be treated as dual mono. When you put the mono source tracks into a sequence with a stereo master track, the mono source will automatically be routed to both stereo output channels. You can then use the Pan knobs in the Audio Mixer to position each sequence track in the stereo spread. This has to be done before you use the source clip in a sequence, however.

Only right speaker working when doing audio on iChat...!

Hello,
I just got the new MacBook Pro and when I use the audio features of iChat the audio of the person I am talking to only comes out of the right-hand side speaker! Other sounds come out of the right and left, such as message alerts, and my speakers otherwise are working fine. Only when I engage someone in an audio chat does the sound from their end come out only on my right speaker...
Any ideas anyone?!
Chris M.

Hi CM!
That is normal when video conferencing with the Macbook pro. The microphone is located on the left hand side, and to reduce feedback the left speaker is muted when conducting a video chat.
This also may help: http://manuals.info.apple.com/en/MacBookPro15inchTechOverview.pdf
Enjoy your MacBook Pro!

Speaker noise when open with Sibelius

Hi guys, wondering if you could shed any light on this problem
I am using a 2011 15" MBP with a Focusrite Saffire Pro audio interface (firewire) and I am using it to record into Logic Studio 9. The only problem is that when I have both Logic Studio and Sibelius running at the same time, my MBP's speakers start issuing a strange hissing/swirling noise.
Neither programs are doing anything, and the sound doesn't go away no matter what I do (other than close either of the programs).
Is anybody able to shed some light on what is causing this problem? Cheers

It's a poor implementation of power saving for the sound hardware. Even if you turn off playback of the feedback sound, the hardware still turns on every time you press the volume keys. The effect I was getting was that it would only turn on for a second, meaning it would click every time you hit the volume keys. This shouldn't happen when you are plugged into AC power, but I can't be sure that I haven't had it happen at least once when plugged into AC. Did you try opening sound preferences to see if it did it after you had adjusted the sound volume from there? This seems to fix mine for awhile so that it will not do this. I also don't seem to be having this issue nearly as often as I did before. I can't think of anything that I have changed, other than putting in more RAM memory which I wouldn't think would have any effect on this.

Left Speaker Squealing When Mouse Not Moving

I have just bought a zalman mouse and i just plugged it in to find that when i left it still, there would be a squeal coming from my left speaker on my dell speakers I use.
Please can someone tell me why this is and how to stop it
Thanks

Yes, once when I first noticed it, and each time I tried both the pram reset, and when I did the other reset (holding down p&r and the other two buttons before the grey screen, and waited for it to reboot from there). Can't remember what that reset was called

Recording Narration With Computer Mic?

Hey,
I am trying to record a narration. I bring up the window, but it does not seem to register my computer mic, although my computer mic is working.
Do you have to attach another mic to the computer to record?
The screen just doesn't light up. I can't press the record button or anything. Even when I click the mic source button, nothing comes up.

Bill is correct that I can narrate with my Logitech Webcam Pro 9000. But it 'just worked' from the moment I plugged it in (and that was to a hub, not directly to the PC) so the only tip I can offer is to check your camera vendors site to see if they have updated drivers. You could even try installing an older driver as sometimes the one vendors include in their supplied software can be faulty.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Hi I'm trying to install an HP C4180 printer as net printer through Alicegate router (Thompson technicolor). Printer works ok when connected with USB to Macbook air, but cannot be seen on the printer installation configuration. Mac OSx 10.7 (Lion)

Hi folks.
From this morning I'm trying to "see" an HP printer C4180 connected on the USB port of the wi-fi router (TIM Alicegate ADSL2 Wifi+N, manufacturer Technicolor).
I installed latest drivers and checked everything is ok and works fine until printer is connected directly with USB to my Macbook Air.
Then I connect the USB to the router and try to find the printer.
On Alice help suggest to find it by ging to system preferences, then printers, add printer with "+", select "windows" sheet. There I can see - not always in reality, but sometimes - the "workgroup" in the left column, select, "alicegate" in second column, select, and here instead of finding the printer list there is a pop up saying that "the server version you are trying to connect to is not supported".
Reading other forums, it may seem that the problem is Lion not yet supporting this kind of connection.
Here a photo of the situation when the message occurs:
Help..
Thanks and regards
Luca

anchio ho lo stesso problema con Mas Os x 10.7.4
con il sistema 10.5 funziona perfettamente
credo sia un problema del sistema
ho provato con 10.8 stesso problema
ciao

How can I stop iTunes from dropping my iPhone 5 when connected with USB cable? It sees it and start a backup and then it drops and tells me cannot find phone.

My HP notebook 64 bit Windows 8 after the last iTunes update will detect my iPhone 5, sync and when finished with thy sync I start a backup to my computer. It runs fine for a bit and then gives me message I have changed settings on my iPhone 5 and asked me if I want to update. I OK the question and runs a bit more and then drops the connection telling me cant find my iPhone 5. I can restart iTunes and start over and does the same thing.
ITunes update 11.1.1.62 had difficulties with the updates on 64 bit Windows 7 and 8.1 causing an error on boot other trouble. I found solution on research that insturcted to Remove iTunes, Bonjour, Apple Support and Apple Update and reload iTunes old version. I simply reloaded the new version becasue did not have the old version of iTunes. I have been working fine with the old version. I know problem is a simple setting somewhere but it is NOT SIMPLE to me since I dont know where the find the simple setting.
Will someone tell what to do. I appreciate all you smart guys.

My apologies...the version is 11.1.4.62 not as stated aboive in my problem description. I'm trying again and it just finished syncing fine and my iPhone 5 is still connected to iTuns physcially with USB lightening cable and is displaying the iPhone icon top right. I clicked on it and iTunes is now "hung' or locked up. Shows to be an active running application but can't get back to it so willl have to kill with task manager. There is some kind of problem going on with the latest version of iTunes and Wndows 7 and 8.1 or something. My iPhone 5 now has a new feature that it is now asking me if I "Trust" this computer. iTunes just came "unhung" after several minutes while I was typing this. Now I am going to start the backup to this computer HP Winsows 8.1 and iTune 11.1.4.62 and see what happens. Says it is Backing up Jerrys iPhone but the Barber Pole progress bar is not turning an iTunes is hung again and I cant get back to it from this page I am typing on. Maybe it will eventually release as it did a moment ago.

Timecode error when capturing with USB in Premiere Elements 7

When trying to capture video from my DV I get an error "\src\Timecode.cpp-955" and PE7 crashes.
I upgraded from PE2 to PE7, and I just checked that it still works in the old version.
I'm using a USB cable, so the Device Control is set to USB Video Class and split scenes are set to content. The camera is a Panasonic NV-GS300 and I'm on Win XP Pro with SP3, Celeron 2.8 Ghz, 2GB RAM.
Any ideas?
Will a firewire solve my problem?

I would not recommend capturing over USB in Premiere Elements -- even though it supposedly works with USB Video Standard 1. The results are too inconsistent and problems, at least in my experience, are common. It's really a pretty obsolete video capture method.
Try it with FireWire and you'll likely see the problem go away.
But it still might not hurt to make sure everything is updated on your computer -- that you're using XP SP3 and that you have the latest Quicktime and firmware for your graphics card.
http://www.adobeforums.com/webx/.3c057647

HT3699 only left speaker playback when narrating with USB mic

Similar Messages

Maybe you are looking for