HT3702 Can I use 2 card holder for purchasing. Other card holder is my brother
Hi. I'm using 2 card holder the is mine other one is for my brother which is in name jalal Twice I purchased in the site. Now I'm getting that I have to visit apple support itune
You will need to do what it says, contact iTunes Support. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
Regards.
Similar Messages
-
HT204587 I can't use touch id for purchasing app from iTunes in India
I can't use touch id for purchasing app from iTunes in India
Hi Love Apple,
If you are having issues with using Touch ID for purchases, you may find the following article helpful:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Regards,
- Brenden -
Can't use Overall Release for Purchase Requisitions
I have two groups, AA and ZZ. Each group has it's own Class.
Group AA uses Cost Center Class (CN) (uses Characteristics Cost Center and Line Amount)
Group ZZ uses Order Class (OC) (uses Characteristic Order)
I have built one and only one Release Strategy for each of these Groups. These Strategies both work successfully when I select the other group to be the group for Overall Release. That is, if I set ZZ to be for Overall Release, then create a requisition, the release strategy for Group AA is applied successfully. However, if I modify the req the strategy for ZZ, does not get applied.
The opposite is true. When AA is set to be for Overall release, then ZZ works. However, if I modify the req, then AA's release strategy does not get applied.
Again, both strategies work correctly when the other Group is set to be the one to use for Overall Release. However, neither strategy works if its group is set to be the one for Overall Release.
What am I missing? I only have two classes, two groups, and two release strategies.SAP Standard system allows only 8 levels of release codes.If client requirement is more than 8 then for excess release codes customisation is done by the technical team (Abapers).Lets take an example of 15 release levels required for a client according to his Business needs then in this case initial 7 codes are customised and remaining 8 release codes are configured in the system.
Release procedure is of two types
Release Procedure without classification
This procedure is applicable only for Purchase Requisitions.
Here PR is released Item by Item only.
Release Procedure with classification
This procedure is applicable to PR,RFQ,Service Entry sheet,RFQ,PO,Contract and scheduling agreements.
Item by Item and Header level releases can be configured
For PR - both item by item and Header level release can be configured
For external purchasing documents - Release is possible only at Header level.
Step 1:
Create Characteristics
In this step we need to create characteristics - conditions to be satisfied for triggering Release startegy.For example client has asked to set release strategy based on 3 inputs.Combination of value, Plant and Purchasing group
1) Total value of PR more than Rs 50,000
create characteristic as "Release_PR_total_value" in transaction code CT04.
Tab - Basic data " Data type --- CURR currency format", "Decimal places - eg. 2 " and "currency eg. INR or USD"
Tab -values key in > 50000 INR
Tab - Additional Data- Table Name "CEBAN" and Field Name "GSWRT"
Tab - Restrictions - class type - 032 - Release strategy
2) Plant
Create characteristic "Release_PR_plant" in transaction code CT04.
Tab - Basic data - Data type - CHAR; Number of chars - 4
Tab - Values - Key in all the plants for which you are required to configure release proc. eg. 1000,2000,3000
Tab - Additional data - Table name CEBAN and Field Name is WERKS.
3) Purchaisng Group
Create characteristic "Release_PR_PurchasingGroup" in TCode CT04
Tab - Basic data - Data Type - char, Number of chars eg. 3
Tab - values - Key in all the purchasing Groups for which Release proc. is to be configured as required by Client.
Tab - Addnl Data - Table Name CEKKO and field name - EKGRP
Step 2:
Define class in transaction code CL02
Menu path SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>Edit classes
Here we assign all the above created Characteristics to a CLASS so that a release strategy to be triggered when all the conditions are met.
Create a new class with free choice of names as "PR_Release_proc" in transaction code CL02.*Key in the class name and select class type as 032 - RELEASE STRATEGY then click on symbol create to enter all the details as mentioned below.
Tab - Basic data - Enter description as "PR_Release-Proc",
status- Released, Same classification - check the push button - Warning Message
Tab- CHAR Enter above created 3 characteristics
1.Release_PR_total_value
2.Release_PR_plant
3.Release_PR_PurchasingGroup
step3:
Menu path is
SPRO>Materials Mgmt>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>set up procedure with classification>
here define
1.Release Groups
Release group 01 is used for Purchase requisitions and 02 for Purchase orders.
Here assign class "PR_Release_proc" against release code "01"
check "OvRelPReq" indicator for over all release (All line items )of document in one shot else it will be released line item wise.
2.Release codes
Release codes are assigned to Release groups, in Workflow these release codes are tagged to users' SAP IDs through which they will be able to approve or reject a PR in SBWP(Inbox in SAP Business workplace.
PRs are released by users in transaction code ME54N.
Eg
Type of user - Level - Release code
PR creator - clerk or Business user -
Approver - Supervisor - R1
Approver - Project Lead - R2
Approver - Asst. Manager - R3
Approver - HOD/General Manager - R4
Release codes R1 to R5 are assigned to corresponding users.Manager R4 can only approve the PR if prior approvals till R3 are completed else not in ideal situation.
For detailed info please refer
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
3. Release Indicator:
Release indicators show the release status of a Purchase Requisition.
For detailed info please refer SAP Help official site
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
4.Release Pre requisites:
These define the order in which individuals or departments release the PR in sequence.
3.Release strategies
Create a new release startegy eg ."A1" or "U1" , write its description PR release for value >1 lakh
Now select release codes according to the Chart of Authority set by your client.
Eg.
Release startegy " A1 - PR release for value >1 lakh"
R1 - Supervisor
R2- Project Lead
R3- Asst. Manager
R4- General Manager
Now click on" Release Prerequisites "push button and check all the boxes in ascending order.Save the document
click on "Release statuses" push button, check release statuses then click on "Continue" push button.
In third push button you can maintain CLASSIFICATION data or later you can directly mainatain in transaction code CL20N for this strategy.
Classification data for example
1. Value - > 100000
2. Plant - 1000,2000,3000 etc
3. Purchasing groups - 101,102,103 etc
By clicking on "Release Simulation" push button you can check whether release is getting affected for configured release codes or not.
In this way you can configure all the required Release startegies.
Now create a PR in T code ME51N with the above conditions then a new tab will appear in PR creation screen at the time of check.Save the document and this can be released by respective users in TCode ME54N.
Tcode - ME54N - For Individual Release
Tcode - ME55 - For Collective Release
For detailed info please visit SAP HELP website
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Regards,
Indranil -
I really don't want a passcode but I love not having to enter my complex password on the small keyboard. Why does this option have to be linked to a passcode? Doesn't make a lot of sense.
From the article:
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
So yes, that's how it's designed. You must have a passcode, though as long as you understand the caveats:
In addition, you will need to enter your passcode to unlock your iPhone in these conditions:
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting
and
You can't use Touch ID for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
you should be able to use Touch ID without needing your passcode. If none of those circumstances is true and you're still being asked for your passcode to make a purchase from the iTunes Store, it would seem that something is amiss with your iPhone.
Regards, -
Can I use touch ID for App Store without using a passcode?
It seems that the ony way I can use the touch ID for App Store and iTunes is if I have a passcode to get into my phone. I don't want a passcode, it get in and out of my phone too often to have to unlock it all the time and I hate manually typing in my password for App I buy. Why can't it do both, isn't the touch ID just as secure for purchases even if you don't have to unlock the phone to get to it??
From the article:
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
So yes, that's how it's designed. You must have a passcode, though as long as you understand the caveats:
In addition, you will need to enter your passcode to unlock your iPhone in these conditions:
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting
and
You can't use Touch ID for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
you should be able to use Touch ID without needing your passcode. If none of those circumstances is true and you're still being asked for your passcode to make a purchase from the iTunes Store, it would seem that something is amiss with your iPhone.
Regards, -
Can I use a mac app store gift card for the mobile app store?
If I purchase an Appstore gift card for the Mac App store, does the credit also apply to itunes, and the regular iOS App Store?
The iTunes Store and Mac App Store use the same user database, so any credit in your account can be used in either place. Gift cards, while they may be labeled as one or the other, are actually identical and can be redeemed though either the iTunes Store or the Mac App Store.
Note, though, that gift cards for the Apple Store are completely different and cannot be used in either the iTunes Store nor the Mac App Store.
Regards. -
i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??
You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.
-
HT3702 can you use a debit card with itunes?
hi, i am wanting to use a debit card from hdfc to make purchase on itunes. when i was living in the usa, making purchases with the debit card went smoothly but here in india despite it being an 'international' card it doesnt seem to go through and is rejected. my card works for many other sites including flipkart and amazon. not sure why apple doesnt accept debit cards
As far as I know debit cards are no longer accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined. Do you have a credit card that you could use instead ? They are generally considered safer when used on sites where the card details are stored. The card also needs to have been issued by a bank in your country and be registered to exactly the same name and address as you have on your iTunes account.
-
Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate
uhm hey guys,
idk where else to get help so ima try here,
i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
do you know what i should install ?
but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
Orrrr could i just go out and get parallels and hope it doesn't get the same problems? -
How can I use this account without specify credit cards, only for free applications ?
How can I use this account without specify credit cards, only for free applications ?
Click here and follow the instructions.
(94222) -
How do you change apple id for icloud if phone is already set up. Need to give each phone in my account their own apple id for icloud so that we dont receive each others messages but can still all use same id for purchases.
Settings-icloud-scroll to the bottom, select delete, if you want to keep the content select keep, otherwise it'll remove it. Then once it is done add the account information for the account you want on that phone. Your apple ID in settings-store will remain the same and each device can still purchase/use content from that account.
-
Can I use an app already purchased for iMac on new MacBook Air?
Can I use an app already purchased for my iMac on a new (yet to be purchased) MacBook Air?
Thanks, Niel. As a follow-up, I need to know if I can also use the same app on a new iPhone and/or a new iPad.
-
when i want to purcahase for first time on itune,,it said this ID have never been used on itune .how can i use my ID to purchase it if this is my first time?
Hi Zannat,
Don't get scared. Cookies are the small file which stores your settings for a website, such as location details, login details, language details and so..
Some sites don't care about your cookies settings but some other sites instructs you to enable cookies in your browser. Enabling cookies is too easy.
Just follow the instructions which explained [[Enable and disable cookies that websites use to track your preferences |here]] .
Thank you!!! -
Can I use store credit for in-app payment ?
Hi There
Can I use store credit for in-app payment or do I have to use my credit card funds?
Although I have enough funds as store credit, everytime I want to make an in-app purchase from my Iphone, it takes me to my credit card and ask to confirm my cc info
Any ways to bypass this process ?
ThanksWell i dont know if you can use store credit.....i was asking that questiob myself, but i guess if you didnt want it to take you to your credit card right away, you could delete your cc info off your apple id. I myself dont have a credit card listed.
-
HT204081 Can i use itunes giftcards to purchase ibooks? If so, how?
Can i use itunes giftcards to purchase ibooks? If so, how?
Hi Mystere,
Click on the iBooks app, select Store, and then either search for the book you want or browse the store. You should be able to then purchase a book, and your iTunes credit should be applied first (like any iTunes purchase that has a gift card credit).
Cheers,
GB -
Can i use my iphone without a sim card as a ipod
can i use my iphone without a sim card as a ipod?
The SIM card is not required to use an iPhone as an iPod or to be used for anything else besides cell phone related services.
For a no longer activated iPhone, the no longer activated SIM card that was used with the iPhone when it was activated must be inserted in the iPhone in order to install an iOS update and for no other reason.
Maybe you are looking for
-
A few weeks ago I had the same issue where items (tv shows) I purchased on itunes would not show using my apple tv on my main television. It gives me an error stating I need to "authorize" the device/account etc. There is no problem with the author
-
Hi all, Can anybody pls help me in this?? I have to generate a report with 1-30 days due,31-60 days etc. How can I achieve it... Thanx in advance
-
Need to setup & installation of SITEMINDER for SAP ITS external
Hi Friend, We installed ITS620 in window server. Now we need to install siteminder & post activities. Need document with details steps for installation of siteminder to use extrenal ITS.
-
Error occurred when view the data from physical layer
Hi , I have created system DSN like "demo1" for excel file. After that i import the excel file into administration tool. after that i want to view the data from physical layer. At that time ,I am getting following error . Please resolve this issue.
-
File Automate features not working
I have a Mac running OS 10.7 and Photoshop CS5, and subsequently CS6, and in each version all the File> Automate features such as Photomerge abruptly stopped functioning. (They did work fine for a while). I upgraded to CS6 to solve the problem with i