HT3702 I pay four a sing that il cost 0,99€ and apple it take from my credid card 1,98€. Its corect?
I pay four a sing that il cost 0,99€ and apple it take from my credit card 1,98€. Its corect?
If you added or changed your card details on your account then you have received a temporary store holding charge( €1.98), as described on the HT3702 page that you posted from.
Similar Messages
-
I pay $3.99 a month for 200gb storage and in my settings it says I have 166gb left, however I keep geting popup messages on my iphone5 that im out of storage and I cant take pictures etc, any suggestions?
The money you are spending is for iCloud storage. The warning you are getting is in reference to storage on the iPhone. You cannot increase the storage on the iPhone except to delete content on the device. If you want to take more pictures, you need to remove some content from the device to create room on the iPhone.
-
My iPod touch 4th gen. Won't charge with a enercell charger that I've used since December. It will only charge with the apple USB cord that came with it. And even the takes it about 6 sec. To realize its charging. Help me fix this?
Yes, I've been using it for months. And I can charge other devices with it. (my iPhone) but something weird just happened..... I kept on pluging it in the iPod and sometimes it would start to chàrge then sometimes it won't charge. Charges every time with the iPhone though.
-
So I need to buy a TV series on my family's account, and we want it just to charge the credit card and not the money from an iTunes Card that's already on the account. Is there any way to do this?
I am pretty sure it will always use the credit card unless payment method is set to none.
That has been my experience anyway.
They already have the money from the gift card so would rather collect from your credit card. -
Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
--- End of inner exception stack trace ---Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
iPhoto 11 doesn't show the photos that I just imported from an SD card, but says its importing to library 15 min after SD card is removed. The import seemed to start normally, I went to mail to check messages, came back to iPhoto & the usual prompt about wanting to delete the photos on the card never came up. The photos didn't show up in events or the library & the device icon wasn't showing so I tried to import again. A prompt then came up saying that I needed to wait until the import was done!
Hi, this problem is also happening to me also. I just took some pics of my daughter on my nikon d3100 and imported them from SD card to iPhoto. It says 'preparing to import' but during the process i do not see the photos being imported. After it was done, there was a new event album, i clicked opend it to see my photos but all of them were blank. I forced quit and re-launched iPhoto but it didnt work, i even re-imported, not to no avail.. Please help. Earlly 2011 13' MacBook pro 10.7.2
-
Yesterday I purchased credit from App Store in "maaii app" 4.99$, that credit is not come in maaii credit balance and deducted the amount from my credit card, Where is that balance?
Hello there, jobymk.
The following Knowledge Base article shows how to report an issue with your App Store purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
itunes is saying that my security code is incorrect on the back of my debit card, but clearly its correct! i do not know what else to do!
Is the address on your iTunes account exactly the same (e.g. spacing and format) as on your credit card bill : http://support.apple.com/kb/TS1646 ?
-
Is there actually a way to talk to a service person at Apple where you don't have to shell out money? I downloaded an app that cost $9.99 and when I tried to use it I get a message that says there is compass interference and to move away from the interference or wave the phone in a figure 8 pattern. Well, now I have a sore arm from constant waving out in the middle of a field and it appears that is going to cost $29 to talk to a person. Does anyone have any idea why this is occuring? As a side note, I can use a normal compass with no issues so it is the phone. From a customer perspective, this is poor customer service.
First of all, an idle threat is one that a person has no intention of carrying out. In the past 16 months that I have had this phone I have become less and less satisfied and found that it is like much of today's technology....over rated and under performing. The one thing that I have never been accused of is not wanting, or not giving help but when a company makes itself unavailable to resolve issues and leaves it to forums run by users helping users, it speaks more about the company than anything else they could do. As I said, I do not make idle threats and I did not threaten you in any way. Guess I'll call this topic done with as it is not and was not the intent to get a war started
-
I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?
The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD -
Any ideas as to how I can update an older version of iTunes to at least version 10.7 given the problems I'm having with "bonjour" and the "software update"?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
Next, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time? -
the billing info keeps saying my security code is invalid and when i use a different debit card it says my bank records dont match WTH
Pease dont' waste your time with that useless article. Carolyn has been warned many times before to stop posting that and waisting people's time.
This error is a little generic at times and there are a few things that could be happening here. Please put in a ticket here for an advisor to check into details:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
There is no need to keep frustrating yourselfs at the moment. -
I am trying airplay one thing from my computer to my apple tv, but at the same time work on something else on my actual computer screen.
Such as airplay a movie to the apple tv but use my computer to work on something else.
Is this possible/will this in future updates.That was a new feature added with Mavericks (OS X 10.9).
http://www.apple.com/osx/whats-new/features.html#displays -- see "AirPlay Display" in the right column. -
Report with data that is present in cube and not in ODS from a multiprovide
Hi Friends,
I have a multiprovider with one cube and one ODS. I have a requirement to create a exception report. This exception report should have records that are present in cube but not in ODS. If cube has a record which is present in both infoproviders then report should not display that.
I hope I am clear on my question.
Thanks and regards,
BalarajThanks Timur,
But this is going to give me all the data present in that selected cube. I want to the report to display data only if it is present in cube but not in ODS.
ODS data
Material............Component...........Amount
10001.................30001................100
10001.................30002................200
Cube Data
Material....................Amount
10001.......................100
20002.......................200
My report should display
Material................Amount
20002...................200
It should not display 10001 as it is present in ODS.
I hope I am clear this time.
Thanks and regards,
Balaraj -
The installer didn't find the hard drive at first, but disk utility was able to find it. So I repaired the disk, and permissions, then quit utility.
The installer was then able to locate the hard drive so I went ahead and reinstalled leopard in hopes that I could use the computer.
However, half way through my reinstall, it froze. So I tried booting it back up from the disc, yet now neither the installer or the disk utility can locate my hard drive.
Is there anything I can do at this point other than buying a new hard drive?Its starting to sound like a failed hard drive. If disk utility can't find the internal hard drive, it probably dead.
Maybe you are looking for
-
HP dv6-6188ca windows 7 pro 64b amd chipset 8G locks up copying files to/from external usb drive
When ever I try to copy a large (>2G) file to or from a external usb drive the computer starts the copy but gets stuck. It has to be powered off and the battery removed to get it to work again.
-
Are all the materials and videos going to be removed after July 13th?
Hello, I would like to know if the whole lessons' material (videos, tutorials, homework, ecc.) will be removed from the course pages after the quiz deadline (July 13th). It would be great to have it accessible in the future for further learning. Than
-
Airport express / Time capsule wi-fi & network speed measurements
I am trying to figure out the best way to connect up my LAN, how to get the best out of the gigabit ethernet devices on it, as well as 5GHz wifi. I have a mac mini as a media server and I want to maximise the speed, as well as improve time capsule a
-
Help on peculiar connection timeout
I've recently been unable to connect to a site (www.bdm.nsw.gov.au) that I used to access all the time. Now I always get a connection timed out message. The problem is independent of the browser I try to connect with: firefox, chromium, w3m, lynx, al
-
Packaging materials in Delivery(Stock update)
Dear all, Iam maintaining packaging goods stock in FG-Storage location. when ever iam doing the Packing in Delivery ,Plant and Storage location determining based on packaging material type and it is comming as Line item in Delivery ... My req: it sh