HT3704 change position of image in table

How can I fine tune the position of an image in a table?
I've got two documents. In one I can go to the inspector mode and presicely set the x and y value.
Then I've got the other document, same image, and in the inspector mode, I can't set the x and y value.
What's the difference?
Thanx for your help
Rene

Hi Rene,
From the title of this thread, you have an image in a Table Cell. Select the Table Cell, not the image, and then Inspector > Metrics will allow you to resize the Cell and/or change X,Y of the Cell (and the image will resize and/or move with the Cell).
(Frill-necked lizard in my backyard).
You can also move the image within the Cell using the alignment buttons on the Toolbar:
Regards,
Ian.
Message was edited by: Yellowbox. Oops, screenshot shows whole Table selected, not just that Cell. Still works as described.

Similar Messages

I have just downloaded Mac OS X 10.9 and Pages 5. When I open any pre-existing document in the new Pages the format is zoomed to 125%, the headers are out of position, the margins are changes, and inserted images are also relocated. What can I do?

I have just downloaded Mac OS X 10.9 and Pages 5. When I open any pre-existing document in the new Pages the format is zoomed to 125%, the headers are out of position, the margins are changes, and inserted images are also relocated. What can I do?

Have you tried resetting the SMC ? > Resetting the System Management Controller (SMC)

Images change position and dimension after client edits on admin console!

Hi,
1. After my client uploaded his images onto the site using the admin console they changed position slightly and did not fit exactually into the image frames i had set when i first made the site.
2. When i opened the site on muse and merged changes the images positions and dimensions changed even more than what was being diplayed on the live site? (E.g I originally had two columns of square thumbnails for some slideshows and now i have a single column of rectangle images)
3. I republished to see what would happen it now displays the way it was diplaying in Muse. The site is: www.jacobbuckland.co.uk
My understanding was that when i create an image frame or gallery in muse that any image uploaded via the admin console should fill that frame no matter what the size or dimensions of that image?
Any help gratfully received. Thanks

Our technical team managed to find the immediate cause for the problem, and a solution.
According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
Where <APPLICATION> is the name of the problematic cube.
After that everything is working.

How to onclick an image to get the image and change position?

Hello,
I'm trying to write a small card game for school project and I need help on this one thing. I woud like the user click on a card (image) get the image name and value and then change position by moving it up a little (a way of saying the user selected the card). Any idea?

Lookup the UINavigationItem class. I think you'll need to replace the titleView with your own custom view that includes text and image. You can access this from the UIViewController: self.navigationItem.titleView.
HTH,
- Ryan

Best way to allow user to change text and image

Hi,
A friend wants to change his product images and pricing etc.,
on his static web pages.
At the moment each product is within a cell in a table and
the cell below is where the text for details and pricing is. This
is the only area he will need to be in. Each product and edtails in
each cell of a table on each page.
He does not know anything about web design, Dreamweaver etc.,
but wants to do update himself.
I would like to know the best way for me to go about this
using DW CS3. Maybe there is another script or program that will
allow this.
Thanks
oz

ozstar wrote:
> Hi,
>
> A friend wants to change his product images and pricing
etc., on his static
> web pages.
>
> At the moment each product is within a cell in a table
and the cell below is
> where the text for details and pricing is. This is the
only area he will need
> to be in. Each product and edtails in each cell of a
table on each page.
>
> He does not know anything about web design, Dreamweaver
etc., but wants to do
> update himself.
>
> I would like to know the best way for me to go about
this using DW CS3. Maybe
> there is another script or program that will allow this.
>
> Thanks
>
>
> oz
>
Hi,
You could use....
An easy CMS like -
http://www.cushycms.com/
Contentseed -
http://contentseed.com/
Contribute -
http://www.adobe.com/products/contribute/
HTH
chin chin
Sinclair

Impact of changing positions and Org Unit short text

Hi All..
This is regarding the impact of changing positions and Org Unit short text(SAP name - Object Abbreviation, technical field u2013 hrp1000-short).The new approach we are ging to have is to keep short text same across the business unit.
Example:
All position in US will have short text u2013 USS
Similarly All US Org Unit short text will be COMUS
I was wondering, from SAP best practices point of view, do you see any downside in this approach?
Example: Any problem in searching position or org using search term.
Please pin your thoughts...
Thanks,
Kumar

Hi,
Normally such change will not have any impact in PA module.
Only in exceptional cases it will have an impact in following cases:
1. First and mandatory condition that you use abbreviation as position name in IT 0001. If this is the case parameter PLOGI TEXTC (in table T77S0) should be equal X.
2. Second condition is that parameter PLOGI SPLIT is equal to X. That means that change of object name will lead to record split in IT 0001 in PA.
So if in table T77S0 you don't have setting PLOGI TEXTC = X and PLOGI SPLIT = X you can go ahead with change of positions abbreviations. It will have no impact on other modules.
Cheers!

Store Image on table ??

Hi,
I would like to know which way is much better on handling the image store.
1. Store image on the table OR
2. Store the links on the table OR
3. any new way..
Please advise.
Thanks.

Depends on your requirement.
Just remember, if you store images in database, your database size will grow faster and it may affect your backup and restore time.
Storing images in table guarantees that image would be available, if your sys admin can asure you that files will always be available and path will not be changed, you may consider links as well.
Regards,
Vishal V.

Row is changing position - ON INSERT

Hi,
I have a table.
SQL> select BORROWER_ID,loan_id,PRIMARYBORROWER from borrower where loan_id=24213;
BORROWER_ID LOAN_ID P
46238 24213 F
46239 24213 F
46236 24213 T
46237 24213 F
I inserted the 3rd row first, 1,2,4 th rows. Why 3rd row is changing position on insertion?
regards
Mathew

Is this means there is Row Chaining and Row Migration in database?No.
Whenever you insert a row into a table, Oracle may try to reuse the space from a previously deleted row.
Rows are not stored in the same order that you inserted them. The only way to get an ordered result set is to use an ORDER BY clause in your query. Without it, the order of the result set is undefined.

Change position of a Column in a system matrix

Hi friends
i created a user field in table POR1. then in matrix the new fields is displaying in the matrix. can i change position of the matrix column using sdk
Thanks

so far as changing of position is concerned, there does not seem to be a way with SDK in runtime. see this thread. David has answered there :):
How to change the order of the columns in system matrix?
regards,
Binita

Can a link only change one cell in a table?

I've been learning Dreamweaver from a textbook, but I'm still pretty new to it, and I'm not sure what terminology to use here. I want my site to have a link that just changes one cell in a table when you click the link, rather than having it go to a whole new page. For example, you click a link and a picture changes but the rest of the site stays the same. So far, I've been doing this by just making several duplicates of an html file, and then just changing that one cell in each copy. It works, more or less, but then whenever I want to make a change to my page, I have to make the same change in all the copies. There's got to be a better way, right?
If this is too complicated to explain in a forum, perhaps someone could just tell me if there's a term for what I'm trying to do, and then I can just look for it in my book or search for it online.
Thanks for your help. Oh, and the version I'm using is CS5.

What you are asking for is called a 'disjoint rollover', which means 'something happens over here, and the effect is seen over there'. It's simple to do even manually. Take a look at this page -
http://www.murraytestsite.com/locrian.html
The code on the page is this -
<!doctype html>
<html>
<head>
<meta charset="UTF-8">
<title>Untitled Document</title>
</head>
<body>
<p><a href="#" onclick="document.getElementById('image').src='_img/masthead-logo1.jpg'">link</a></p>
<table width="347" border="1">
<tr>
    <td>  </td>
    <td>  </td>
    <td>  </td>
</tr>
<tr>
    <td>  </td>
    <td>  <img src="_img/masthead-logo.jpg" width="347" height="120" alt="" id="image"/></td>
    <td>  </td>
</tr>
<tr>
    <td>  </td>
    <td>  </td>
    <td>  </td>
</tr>
</table>
</body>
</html>
I used a table because you specifically asked about tables, but I wouldn't recommend using them for anything other than tabular data, and certainly not for general layout. The code could be re-written like this to completely eliminate the table -
<!doctype html>
<html>
<head>
<meta charset="UTF-8">
<title>Untitled Document</title>
</head>
<body>
<p><a href="#" onclick="document.getElementById('image').src='_img/masthead-logo1.jpg'">link</a></p>
<div><p><img src="_img/masthead-logo.jpg" width="347" height="120" alt="" id="image"/></p></div>
</body>
</html>
Better, huh?

How to insert image into table and to in Oracle 9i intermedia?

Mr Lawrence,
I want to ask something:
I use Oracle 9i intermedia
If i use this script:
CREATE TABLE images (
file_name VARCHAR2(100) NOT NULL,
image ORDSYS.OrdImage
then
CREATE OR REPLACE DIRECTORY imgdir AS 'd:/data';
then
INSERT INTO images (file_name, image)
VALUES ('tree', ORDSYS.ORDImage.init('file','imgdir','tree.jpg' ));
I put tree.jpg in directory d:/data in my hard drive.
Is my tree.jpg file had already get in to my images table?
I'm little confuse, because when i check my table with this script:
select file_name, i.image.getWidth() from images i;
it's show that my i.image.getWidth() for file_name tree is empty.. that mean my tree.jpg doesn't get in to my table.. am i correct?
N also i want to ask how to display to screen all of my image from images table?
Is it posible Oracle 9i intermedia to support display image from table?
How?
thanks Mr Lawrence

-- First step would be to create a directory in oracle and map it to the folder where your image resides.
create directory image_dir as *'c:\image_dir';*
Then you would have to use a procedure to insert the image in your table. SO first create a table to hold the image. Note that you have to use a BLOB to insert the image.
CREATE TABLE test_image
ID NUMBER,
image_filename VARCHAR2(50),
image BLOB
Now let's write the procedure to insert the image in the table above.
CREATE OR REPLACE PROCEDURE insert_image_file (p_id NUMBER, p_image_name IN VARCHAR2)
IS
src_file BFILE;
dst_file BLOB;
lgh_file BINARY_INTEGER;
BEGIN
src_file := BFILENAME ('image_DIR', p_image_name);
-- insert a NULL record to lock
INSERT INTO temp_image
(ID, image_name, image
VALUES (p_id, p_image_name, EMPTY_BLOB ()
RETURNING image
INTO dst_file;
-- lock record
SELECT image
INTO dst_file
FROM temp_image
WHERE ID = p_id AND image_name = p_image_name
FOR UPDATE;
-- open the file
DBMS_LOB.fileopen (src_file, DBMS_LOB.file_readonly);
-- determine length
lgh_file := DBMS_LOB.getlength (src_file);
-- read the file
DBMS_LOB.loadfromfile (dst_file, src_file, lgh_file);
-- update the blob field
UPDATE temp_image
SET image = dst_file
WHERE ID = p_id AND image_name = p_image_name;
-- close file
DBMS_LOB.fileclose (src_file);
END insert_image_file;
Now execute the procedure to insert the image.
EXECUTE insert_image_file(1,'test_image.jpg');
Thanks,
Aparna

How to Track the changes made to the custom table field value

I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
Thanks & Regards,
Kranti

Hi Satya,
These are the steps you've to do.
1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
4. You can keep track of the changes made to the table by monitoring these tables.
Regards
Anil Madhavan

How to change recon.account directly in Table with out changing customizing

Hi Gurus,
I want to change Customer reconciliation account but this is not possible any more due to display option for reconciliation account in customizing.
I know I can change customizing and then change the reconciliation account, but there is a better way doing this.
We can change this directly in the table without changing customizing, but I don't know how to do this. Does any one know how to change directly in the table?
Many thanks in advance

Hi there,
The steps that you should take include:
1. go to SE16
2. put knb1
3. on the field selection input the customer you want to edit
4. Execute
5. type to the transaction field /h and press Enter
6. double click to the customer line item you want to change the recon
7. this will navigate you to the debug environment
8. on the debug environment press find/search button -or- CTRL+F to find a keyword code
9. you should see if code = 'SHOW'.
10. now please double click on the word "code" to set the Breakpoint
11. Press F7
12. you will see the program routine will stop at if code = 'SHOW'.
13. Double click on the word 'code'
14. 'code' will appear on the righ hand side with value = 'SHOW'
15. change the value of 'SHOW' to 'EDIT' by double clicking the Edit icon (pencil) and replacing the value of SHOW to EDIT
16. press Enter
17. press F8
18. you can now change the recon field
19. Press SAVE button
20. Double click 2x (or more) on the STOP sign, until your breakpoint is gone
21. press F8 and you should see the message of "Database Record successfully created"
Good luck!
Regards,
Fausto
Edited by: Fausto Jahja on Jul 21, 2009 5:26 PM
Edited by: Fausto Jahja on Jul 21, 2009 5:50 PM

How to change font size in a table?

How to change font size in a table without using the font style of another document? Please show a sample script. Thanks!

Hi Dave,
Thank you so much for the email. I tried every object and method I can
posibly think about such as
myTable.Rows.Item(1).PointSize = 24
myCell.Characters.Item(1).PointSize = 24
I got error message all the time. These objects don’t support PointSize.
All I need is to change point size of the text in InDesign tables created
using VBScript. Could you help me with this? Thanks,
Regards,
Li

How to change default value in a table using ALTER TABLE

Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
Any help will be needful for me
Thanks and Regards

user598986 wrote:
Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
ALTER TABLE test
MODIFY (indicator DEFAULT 'I');
Incidentally, INDICATOR is a keyword in Oracle, so you may have problems using it as a column name. If so, you'll have to enclose the column name in double-quotes, and be careful to use capital letters inside the quotes.
Edited by: Frank Kulash on Aug 26, 2009 11:42 AM

HT3704 change position of image in table

Similar Messages

Maybe you are looking for