HT3706 Can't update the EFI firmware.
When trying to update the EFI firmware, I get the message: 'This computer does not need this update.' even though my firmware is out of date.
My firmware version is:
Model Name: Mac mini
Model Identifier: Macmini3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MM31.00AD.B00
SMC Version (system): 1.35f1
Serial Number (system): YM9381HS9G5
Hardware UUID: 4366F0EE-B742-5F78-B3C2-01C6D0DAD36F
and Apple recomends:
Mac mini (Early 2009)
Macmini3,1
MM31.0081.B06 (EFI 1.2)
Is the 00AD part of the version number in Hexadecimal? in which case it is a higher version and does not need the update.
The reasons for my confusion is that I'm trying to install new memory modules, which are either failing due to incompatability or due to firmware versions, so I'm simply trying to rule something out....
Thanks
Thanks,
Was just double checking, before I returned perfectly compatible RAM.
The RAM I tried was indeed "PC8500 DDR3 1066MHz 204 Pin", but I guess there are more subtleties than that...
So, for anyone wishing to avoid my problems, then it was:-
Kingston RAM
Part No: M51264H70
and this was the most info I could glean about them:-
Speed: DDR3-1066 / PC3-8500
Technology: DDR3 SDRAM
ECC: No
Unbuffered
Voltage: 1.5V
Form Factor: 204-pin SO-DIMM
None of the above conflicts with what apple recommend.
I had located the Crucial ones before posting, so I'll probably go with them as they are based in the UK.
Thanks
Andy
Similar Messages
-
Update the EFI firmware (1.5)
A beginner question ... My Mac mini (Mid 2010) is running under 10.6.8. For practical reasons, I installed OS X 10.8.3 on an external hard drive, which allows me to start on one or the other of the two systems. Mountain Lion in the App Store offers me to update the EFI firmware (1.5) of my Mac mini. However, on the download page, the requirements are the 10.7.2 system. If I perform this update, can I boot and work normally under Snow Leopard? Thank you for your possible answers.
That update enables the internet recovery option for
Lion and Mountain Lion and also some stuff with booting
after a power interruption. Since the machine is running 10.6.8
and ML is on an external drive, if you kept a copy of the
ML installer around you really don't have any need for
the update. And if you don't have a copy of the ML installer,
you can always redownload it and put it away for safe keeping. -
How can i update the FPGA2 Firmware
I tried to install the Flexmotion 5.1.xf4 Patch
but it is not posible to load the 7344.fp2 FirmwareThe normal procedure to update the firmware is to right click on the firmware folder in MAX and select "Update All Firmware Sectors". What error are you seeing?
Regards,
Brent R.
Applications Engineer
National Instruments -
Can't update the firmware of my GT70 2OC (Problems with your firmware)
I can't update the last firmware of GT70 2OC, the guide says run file ecwin.bat as administrator and it will automatically choose which folder of (352x & 353x) is the right one for my notebook and it will run automatically.. well it doesn't do that and it show me this
And this is what inside the firmware.zip
So, which folder is the right one for the GT70 2OC ? (352x or 353x) ?
Because I can just run the winflash.exe from anyone of them.
BTW Norton removed "Autoflash.exe" it detected it as a medium risk and bad reputation -_-Quote from: Omar Os on 28-January-15, 17:41:27
The problem is I think I installed the wrong one last time :\ because they made the same mistake and the same error appeared -_- so I may have installed the wrong one from the 352x or 353x .. and the touch buttons didn't work since then I think.. maybe that's why !
if you are sure that you reflashed to the wrong one,
then reflash to correct one, there are 2 choices only
ie: if your current is .7xx and you have issues some keys not working or other not working stuffs, then reflash to .5xx
and opposite
Quote from: Omar Os on 28-January-15, 18:11:49
BTW Norton removed "Autoflash.exe" it detected it as a medium risk and bad reputation -_-
turn off/disable Norton before flashing -
How to specify the EFI bootloader path in the EFI firmware?
I want to single boot Ubuntu on my MacBookAir. I've deleted the HFS+ partition and replaced it with a EXT4 and installed Ubuntu 10 with grub EFI. I thought the EFI firmware would automatically look in /boot/grub/efi... but it doesn't... How can I configure the EFI firmware? Or even where is the EFI firmware stored? When I boot while pressing option it doesn't show up the efi screen.
The MacBook Air is great hardware but I don't like the MacOSX and HFS+You should look at the Ubuntu MacTelSupportTeam pages here:
https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation -
i have a mac mini early 2009 and i want to install 8 gb ram but it doesn,t work.
it says on the OWC site that i have to install the EFI firmware 2.1 update but it won,t let me,it says(the mac mini)that i don,t need this update.
my kernel is 32bit but my EFI is 64 bit,how can i install 64 bit so i can use the 8GB cause with 32 bit i can,t use more than 4gb ramCheck your computer's EFI Boot ROM version;
1. From the Apple () menu, choose About This Mac
2. Click More Info Under Contents
3. Select Hardware
If your Mac mini's Boot ROM version is the following or more recent, then you do not need the update to use 8 GB of RAM;
Boot ROM Version: MM31.0081.B06 -
How can I update the firmware all at once
I'm a tech support in a school, approximately our school has over 500 laptops, how can I update the firmware on all laptops at once?
Apple Configurator is the software you want - and it's free from Apple. However, I'm dubious that firmware can be updated all at once.
http://help.apple.com/configurator/mac/1.4.1/ -
My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?
Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
Tried to update the EFI on Macbook Pro 2011 & Crashed?
Hey all
So this is my new Macbook Pro 2011! FIrst apple producct ever!
I installed a bunch of updates to my mac before & they worked fine- without issue
but i recently tried to install the Macbook Pro 2.3 Firmware Update & the thunderbolt firmware update but something went horribly wrong
The mac was plugged into the wall and the magsafe charger was lit green- and the update downloaded & seemed to have installed- but on reboot i got a horrible single beep & the HDD went out...
Then after that it tried to reboot on its own 3 more times b/ci heard the fan- but it was without a display [just a black screen but no picture] & but the HDD kept getting cut off...
I held down the power button for 7 seconds & it finally booted normally after a prolonged apple logo screen
& now it seems to be working fine...
can you guys tell me what the heck just happened? My macbook crashed? :[ /?
btw system prefrences says the update is installed- but system update still says its avialable?? O_OHey Pennyboy24,
I have an early 2011 Macbook Pro and I also just updated to the Macbook Pro 2.3 EFI Firmware Update. Mine updated fine but when the MBP restarted, it also made that single long single beep and it was slow to restart. Once it restarted, everything seemed to be normal but now my System Updates don't work. Everytime I click on System Updates, I get an error that says it crashed. Since your System Update says the EFI Firmware Update is still available and my System Update now crashes, I'm thinking the update messed up something with System Update. I've just spent weeks trying to get my OS X Lion working so this really ***** to have the EFI Firmware Update cause me another problem. Anyone with suggestions? -
Can I update the software on my MA002LL IPOD Classic 5th Generation?
Can I update the software on my MA002LL IPOD Classic 5th Generation?
If it’s running version 1.3 of the firmware, it’s up to date. Otherwise, click here and follow the instructions.
(115305) -
GE60 0ND-412XTR - I can't update the BIOS
Hi guys.
I'am living Istanbul, Turkey. And I know very little English.
If the My problem is not being able to update the BIOS on my laptop.
I did the following steps one by one.
m-s-i-.-c-o-m-/files/pdf/Win8_UEFI_BIOS_Update_auto_en.pdf
Therefore, I can not update the BIOS.
What to do?
Thank you.
SYSTEM FEATURES
MSI GE60 0ND-412TR
Core i7-3630QM
8GB 750GB
GTX660M 2GB
15.6" Full HD
FreeDos
MY UPGRADES
120GB Kingston mSATA
Installed: Windows 8 Prox64
IN ADDITION TO
Although SSD drive installed takes about 40 seconds to see the Windows logo.
AND THE BIOS SCREEN
i-.-i-m-g-u-r-.-c-o-m-/6TN2bLF.jpgQuote from: Essometer on 01-July-13, 05:05:50
So you can´t update an GE60 with freedos to UEFI, is that right?
I have Windows 8 on my GE60 freedos und the problem that my GPU won´t boost.
Will this bug be fixed anytime soon?
You cannot update the GE60 that came with FreeDOS to UEFI, correct.
The GE60 does not have a GPU boost function like other models do. It does have a built in GPU boost that is regulated by the GPU, and this was fixed with a recent firmware update (roughly 3 or 4 months ago). You should update to the latest FreeDOS/Win7 bios if you have not yet. -
I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?
I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?
-
How can I update the thumbnails in the slide panel when a slide has been changed?
When the text in a slide has been changed, how can you update the thumbnail in the slide panel to reflect this change?
We translated slides, but the slides in the slide panel are still in English.
Thanks for your help.the slides should update automatically as you type
are you using a theme you created yourself, or one you have added for this show?
when you play the show, does the slides show correctly? If they are OK you could still show the presentation.
also what Mac are you using and what graphic crd is installed? -
How can we update the last synchronization date and time..on SUP in sccm 2012 R2
Hi,
Can you any one please guide me how can i update the last synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log
"Wakeup for a polling cycle " and " Wakeupby inbox drop" and "Wakeup by SCF change"
Thanks
Balaji KYou'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
Have you reviewed wcm.log and wsusctrl.log?
Jason | http://blog.configmgrftw.com | @jasonsandys -
I can't update the apps in my ipad once I try it update it says this update not for this Apple ID . I need help plz
Help please any one ?
Maybe you are looking for
-
Optical drives reads but wont write after swap
hello everyone, I bought an iMac G3 450MHz that had had a 'superdrive' fitted. It both read and wrote CD's and DVDs. I tested it out and it worked just fine, I even made a back up copy of my Tiger DVD with it. I wanted to put the optical drive into m
-
How to place push button on right corner of a screen
Hi, I am creating push button on application tool bar of a screen using set pf-status,usually the push button is created on left hand side of the screen. But I want to put this push button on right hand side of the screen.Is it possibe.....? Regards
-
Dear All, Our client is using SAP88. Is there a way for SAP to automatically generate a 5% markup to the total sales amount on items paid for by credit card or a specific term for payment? Please advise. Thanks. Regards, Yuka
-
16gb micro SDHC on E90 - data loss
Hi there, My 16gb Sandisk Micro SDHC which I was using on my Nokia E90 was alright till yesterday. This morning when I browse my memory card, I cant see any of my data on it. All I can see is the default folders "Documents, Images, Other, Sound clips
-
Program Crash when entering a Caption in Organizer
Hi Forum I am using Elements 9.0 with patch to level 9.0.3. When attempting to create a caption for an image the program consistently crashes, the details of the crash are as follows, is anyone else experiencing this problem? Any suggestions welcome.