HT3728 can I rename my time capsule with a soft reset or how can I rename it?

I am trying to rename my time capsule, how can this be done? do I have to perform a reset and if so soft, hard etc.

If you are able to access the Time Capsule using AirPort Utility, you can rename the Time Capsule as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility 6.0
Click on the Time Capsule icon
Click Edit
Click the Base Station tab at the top of the window
Edit the Base Station Name as you wish
Enter the Base Station password...(.if you want to change it)
Verify password
Click Update at the lower right and the Time Capsule will restart in 25-30 seconds with your new settings.
If you want to change the Wireless Network name and/or password, click the Wireless tab before you click Update and make the changes that you need.

Similar Messages

  • How can I use my time capsule with windows7

    How can I use my time capsule with windows7?

    This is asked regularly.
    https://discussions.apple.com/message/10978060#10978060
    Look at the more like this. On the right column next to the post.
    Load airport utility for windows.. which will also load bonjour for windows.
    In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

  • I can't expand my Time capsule with an other airport to support wifi transfer itunes music to my stereo receiver.

    I can't expand my Time capsule with an other airport to support wifi transfer itunes music to my stereo receiver.
    I can see my time capsule in the airport configuration program, but not my airport. Not even when it is cabled.

    On the side label find the model number.. A1084 for example is old. It will not work.
    The new one A1392 and the earlier N wireless A1264 will both work.
    http://en.wikipedia.org/wiki/AirPort_Express

  • Can i connect my time capsule with my router as a bridge ?

    can i connect my time capsule with my router as a bridge ?

    I am a bit lost .. did you work this out?? You are running a second thread.. and answered it with this question.
    The TC can be bridged.. plug it into the main router by ethernet and run it in bridge mode.. that is router bridge.
    Do you mean wireless bridge??
    If you mean wireless bridge the answer is maybe but unlikely.
    If you setup the TC to join a wireless network.. it becomes a dumb client not a bridge.
    So to get it to wireless bridge you need to use another apple router.. that is the only way to get them to work.
    If you want specifics ask specific questions.

  • Can I use airport time capsule with a hotspot network?

    Can I use airport time capsule with a hotspot network?

    Can I use airport time capsule with a hotspot network?
    Very very poorly..
    It can join a wireless network..
    See instructions here.
    https://discussions.apple.com/thread/5719954?tstart=0
    End result is super slow wireless connection to the TC and all packets pass through the hotspot so expect internet to drop to nothing while you are backing up.

  • Can i use my time capsule with virgin wifi hub

    can i use 2tb time capsule with virgin media wifi hub router

    Yes, but it will need to connect to the Virgin router using a permanent wired Ethernet cable connection from one of the LAN <--> ports on the Virgin router to the WAN "O" port on the Time Capsule.

  • Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112). How can I repair it?

    Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112).
    How can I fix it?

    You might want to take a look at Pondini's excellent support document......Time Machine Troubleshooting
    http://pondini.org/TM/Troubleshooting.html
    See # C17

  • When i was in a phone conversation my phone has switch off and began to vibrate. I solved with a soft reset. It can be a bad problem?

    When i was in a phone conversation my phone has switch off and began to vibrate. I solved with a soft reset. It can be a bad problem?

    Is the battery charged?
    By factory reset, do you mean you "restored" the iPhone?

  • HT201274 Can a Sprint Iphone 5 work with T-mobile network? How can one unlock with the MSL code? Sprint is not abiding by the Unlocking Consumer Choice and Wireless Competition Act.  FCC will only enforce if we file more complains.

    Can a Sprint Iphone 5 work with T-mobile network? How can one unlock with the MSL code? Sprint is not abiding by the Unlocking Consumer Choice and Wireless Competition Act.  FCC will only enforce if we file more complains.

    T-Mobile is a GSM network whereas Sprint is a CDMA network. They are incompatible. Sprint is not obliged to unlock a phone that is still under contract. Their phones may not be capable of being unlocked.

  • How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

    My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

    Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
    Click on the Wireless tab at the top of the page
    Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
    Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
    Then, you must power off your entire network...all devices....in any order that you want
    Wait a minute
    Start your modem/router first and let it run a minute
    Start the Time Capsule and let it run a minute
    Keep starting devices one at a time until everything is powered up
    If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
    Open System Preferences (gear icon) on the dock
    Open Time Machine
    Click Select Disk
    Click the Time Capsule to highlight it
    Click Use for Backup or, it might be Use Disk
    Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
    If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

  • Can I use my time capsule with a bad hard drive as a wireless router if I remove the hard drive?

    I have a 500 GB time capsule with a failed HD (i've repalced the whole machine with a new time capsule).  I cannot get past the start up when I plug it in and the light glows a solid amber.  If I remove the hard drive can I use it as just a wireless router to exted my network?

    Yes, although the existing power supply might go bad before long.. you can run the TC as just an AEBS..
    It is a fairly easy job to get the hd out.
    http://www.ifixit.com/Device/Apple_Time_Capsule
    Key to it is using hot air gun or even a hair dryer on really high temp lowest fan and spend enough time getting to glue to soften.

  • Can't Connect to Time Capsule with VMware Fusion

    I'm having problems connecting to my Time Capsule's hard drive with Windows through VMware Fusion. I have Windows installed with Boot Camp, and use Fusion to run my Boot Camp partition virtually. When booting natively(Boot Camp), Windows can connect to the Time Capsule hard drive without any problems. However, when using Fusion, I get the following error message when trying to connect to the Time Capsule hard drive:
    +Unknown user, incorrect password, or login disabled. Please retype the login information or contact the disk's administrator(67)+
    Any ideas as to what the problem is?

    I had the exact same experience as you. I solved it by putting the Time Capsule into Bridge mode. On either Mac or Windows, open Airport Utility and click on Manual Setup. Then click on the "Internet" icon. Near the bottom of the tab you'll see "Connection Sharing". Click on the small arrow and select "Off(Bridge Mode).
    After doing this, the Time Capsule showed up in my virtual XP machine's My Computer as a mounted volume. I have successfully backed up my XP machine running in Fusion 2.0.1 by directing Windows Live OneCare to this network location.
    Bryan

  • HT3728 When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if I redo the factory reset.

    The Time Capsule is not providing a wireless connection.
    When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if  I cancel the Airport Utility app and restart it. I performed the factory reset again, restarted the Airport Utility and received the same error. What are the steps to debug and fix the wireless problem?
    My Time Capsule is connected to my FIOS router and to my Mac Mini. I am still able to connect to the Internet from the Mini via ethernet. It seems that the Time Capsule acts as a bridge for the ethernet connections between Internet to FIOS, FIOS to Time Capsule, and Time Capsule to Mac Mini.

    Which model TC is this? The A1xxx number from the base please.
    Try the setup in full isolation from the network.. so unplug the TC from the network.. and turn off wireless in the mini.. so you have mini--ethernet--lan port TC.. and nothing else.
    Do the factory reset.
    Now check if TC comes up in airport utility..
    If it fails, turn on ipv6 local link.. if you are using 6.3 utility this could be necessary.
    Still fails, try loading the v5 utility.. you will need to plug the computer back into the FIOS to get internet. Then depending on OS.. Lion according to your profile.. you can just down the utility.. ML takes more steps.
    See below.
    Do you have an iphone or ipad.. download the airport utility app and use those for the setup.. that can sometimes work better.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0

  • I have my ipod nano 5th generation and when i plugged it to my computer it is recognized but i cant do anything. On the ipod all i can see is a black screen with the apple sign! How can i fix this?

    I have my ipod nano 5th generation and when i plugged to my computer it is recognized but i cant do anything. On the ipod all i can see is a blackscreen with the apple sign! How can i fix this?

    Howdy Lumagofe,
    I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
    Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
    If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
    If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
    All the very best,
    Sterling

  • Can I use my Time Capsule with a point to point antenna?

    We have a building about 400 feet away that I would like to install wireless cameras.  Can I use a point to point antenna with our time capsule or is there a better option?

    The Time Capsule is too hard to get into. You can do this but the end result will be rather messy and for an expensive unit like the TC that is a waste.
    Get a unit made for this job.. you only need a WAP..
    eg http://www.tp-link.com/en/products/details/?model=TL-WA5210G

Maybe you are looking for