HT3728 Ethernet cable ran to iMac works, but doesn't when plugged into TimeCapsule
Need help!!! Time Capsule will not work. Continue to get the blinking amber light, even after a soft and hard reset. I tried to reset the modem and that did nothing to help the problem. I then plugged the ethernet cable into computer and it works fine (thus how I am online posting this).
Any help or suggestions please let me know.
Thanks
I guess you are using cable modem..??
You cannot change over clients without turning off the modem for a length of time that allows the ISP equipment to reset the MAC address of the device that captures the IP.
It can sometimes take, 15min off or even overnight for the modem to reset.
When it turns back on.. you must have only the TC connected to it.. the first device turned on will capture the IP.
So make sure the TC is plugged into modem.. it must be from WAN port.. (next to USB).
Power up the modem after the off time.. then after 2min power up the TC.
If your modem is not cable tell us.
If this doesn't work tell us precisely the modem make and model, and your ISP.
Similar Messages
-
my iphone 4 stopped working.the screen went hazy a few times then white.tried a reset but now screens black and phone makes the charging noise every ten seconds when plugged in. any fixes. oh battery has 3.7volts constant
i solved this myself.a new digitizer and screen fitted .phone now ok..charging noise was to alert you that the digitizer had a fault
-
Hi
I have a IPod touch 32GB, but im having a few problems with it.
When i plug it into the computer its doesn't charge or appear in ITunes and 'my computer'. However when i plug it into the mains it charges!
Any idea what's happening the my iPod?! Any help to save my precious iPod would be very helpful!If the cable works from a wall charger, then I'd try a different USB port, verify your USB ports support USB 2.0 (may be a setting in BIOS), or try a different computer...
For the last test, if the computer has iTunes installed, DO NOT SYNCH your iPod!!! -
My iMac freezes while working but more often when in stand by is.
my iMac freezes while working but more often when in stand by is.
Hi ervinfromgermany,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iMac:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
Cheers,
- Judy -
I used an ethernet cable between my iMac and Time Capsule for the initial backup. Now that initial backup is concluded, can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly. Is this assumption correct?
can I assume I can simply unplug the Time Capsule from my computer without any glitches and Time Capsule will then run wirelessly. Is this assumption correct?
Yes, if the computer will be able to receive a strong wireless signal from the Time Capsule.
I did not disable wireless. So I assume the backups are occurring both with the ethernet and wirelessly.
It is inot possible to have both an "active" Ethernet and "active" wireless signal simultaneously. If an Ethernet connection is established, your computer will default to the Ethernet connection. If the Ethernet cable is unplugged, the computer will revert to the wireless connection.
I also show 2 wireless networks available through Airport. Shouldn't there only be one now?
You have a simultaneous dual band Time Capsule. That means that it will always be providing both a 2.4 GHz and a 5 GHz network.
I named my new network the same name as the old network. This enabled all of our devices to continue with their connection without entering the new network and/or passwords; however, I am afraid this may pose problems in the future somehow. Any input on this issue as well?
Things should be fine. Devices will connect to the best signal.....either 2.4 GHz or 5 GHz....based on their capabilties and location in relation to the Time Capsule. -
my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?
There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.
-
I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.
Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.
-
My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps! -
In Numbers, I copied a worksheet and deleted the contents. The sheet I copied has a header. I can't see it or bring it up when I'm working but it appears when I print the sheet. How do I delete the header?
Hi Cristina,
Headers are not shown in normal view.
Menu > File > Print to open Print View.
Hover the cursor over the Header to see the outline. Click and delete.
Regards,
Ian. -
hi just done some up dates on my i phone three it got half way through sync with my phone then the phone turned of and came back on again with the i tune picture and the end of the usb cable. but my phone is plugged into my computer can anyone help
Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
Then you can restore your phone: http://support.apple.com/kb/HT1414 -
Asked a mo. ago why hot sync appears to work but doesn't--zero responses from Palm so trying again
hot sync appears to work but doesn't transfer info! Options dee20002
Regular Visitor
Posts: 4
Registered: 09-10-2008
Palm Z22
Message 1 of 7
Viewed 449 times
hot sync appears to work but doesn't transfer info! Options dee20002
Regular Visitor
Posts: 4
Registered: 09-10-2008
Palm Z22
Message 1 of 7
Viewed 449 times
I admit, it's been awhile since I synchronized. Just did so, and all appeared right with the world, the handheld made the appropriate noises and showed the appropriate actions and same on the computer (XP, connect as always have through USB). In other words, they appeared to "talk" and said they were synchronizing. But my data (like important calendar entries) is simply not there. Nothing. Nada. Nothing recently added.
I tried repeating it several times. Yes, I have the system set up so that desktop overrides handheld. So what's up? Used this a lot in the past, never had this happen.
Thanks for any help.
Using XP and the original hot sync that came with palm and that I've always used--no changes. Help????
Dee
Post relates to: Palm Z22
Post relates to: Palm Z22
Post relates to: Palm Z22I'm having the same problem though not with the exact same components. I have a Palm Z22 and Windows Vista--things were going great until a few days ago when I noticed that the palm weren't connecting. The Hotsync process proceeds normally, there are no problems noted in the hotsync log, and yet things do not travel from the computer to the palm and vice versa. I've tried pretty much everything: I know the palm is connected to the desktop, not Outlook; I have tried soft and hard resets; I have uninstalled and reinstalled the software multiple times; I know the username is correct.
I suspect the problem has something to do with Vista; when I restored my computer to a previous time it started working fine but this morning it stopped again. The computer may be automatically updating in a way that is preventing the Palm Desktop software (verson 4.2) from working. Version 6.2 seems to work but I really hate it--there's no color schemes or categories. If someone could help me out with this I would really, really appreciate it.
Post relates to: Palm Z22 -
Hello all. My system is Windows 7 64bit. In the past my phone worked just fine, plug it into a usb slot, synced up, updated... but for months now it has not worked. Other Iphones will not work on this PC either with their corresponding cables. But my Iphone will also not work when plugged into other computers.. it will not show up at all.. no charge.. no itunes... no drivers show up in Device Manager. My phone works just fine when plugged into the wall with it's cable.. charges fine everything works.. but it will not charge when plugged into a computer.
So far... I have uninstalled everything related to apple... ran ccleaner.. fixed registry errors. Reboot PC, reinstall all itunes and apple components (all latest software) and nothing.
I have gonet o services and stopped and started apple mobile device. It is set to automatic.
I have hard reset the phone and soft reset it.
The cable obviously works. The Phone works when plugged into the wall.
Other Iphones will not work on my pc, nor will my iphone work on theirs
I have disabled windows firewall along with my Comodo Defense Plus and it's firewall. I have disabled my AV. I have scanned with ad aware plus, Avast, ran hijack this and fixed registry errors. Ran Ccleaner.
My device manager does not have anything related to apple in it.. I have no idea why. My Device Manager has no portable devices detected at all and does not recognize anything related to the phone.
Core 2 duo 6600
2gigs of ram
Windows 7 64 bit
I have checked all the tech support stuff I can find. I am desperate. Apple will not help me on the phone without charging me 30$.Also.... my phone works and can do everything fine when not plugged in.. I just can't get my computer or others to recognize the darn thing when plugged in!
-
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
martinfromdevon wrote:
Warning to iPhone users. Do not start the update of the iPhone software using iTunes.
Nonsense, and very misleading advice. I've updated iPhone 3G, 3Gs,and 4 through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones. Of course, I've never jailbroken my phones either. Hack your phone and have update problems? I've got news for you, the problems are not a result of iTunes or Apple's updates. -
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
As per the forum term of service you can't get help here. Use google.
that's the downfall of jailbreaking your phone. -
I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then plug in the AV cable - no sound. AV first, then earphone - sound. Anyone know why?
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
Maybe you are looking for
-
Looking for a viable docking station for dv7t.
Looking for a viable alternative to the port replicators listed on the HPShopping website for a Dv7t. The reviews of those are horrible. There must be a better alternative.
-
Consolidate ports for multiple managed servers
Hello, say I've got two managed servers on a single machine - A and B. Each is running a different app in its own jvm on separate ports. Now what I'd like to do is be able to access both apps via the same port..just with different context paths like
-
File stays locked even after host instance restart
Hello All, We have a custom adapter build over File Adapter. The extra things done by the adapter are sorting and archiving of file. We have 2 BizTalk servers to receive the input files. The file extension is change to .inprogress when it is being wo
-
Vendor update / generation in source list
Hi, is there any solution that vendor update / generate in source list with reference to info record creation date. standard system behave in a way to generate / update source list on current date of updation. Regards, Ali
-
Screen for 'Additional Data B' of VA01
Hi folks, i want to add one field cusomer no in 'Additional Data B' tab of VA01. can anyone tell me the screen number for 'Additional Data B' of VA01 & the complete process of creating the field & validating the VBAP table? Points will be awarded. R