HT3728 How is the extended network with Time Capsule Airport 2013? (802.11ac)

I have a Airport Time Capsul 2013. wireless network does not extended. All updates ok. Please help me..

Apple's "extend a wireless network" feature appears to be proprietary to Apple.....and as far as we know....will only work when the Time Capsule connects wirelessly to another Apple wireless router.
So, it would be extremely unlikely that that the Time Capsule could extend the signal from your cable/modem wirelessly.
Instead, to allow the Time Capsule to extend the wireless signal coverage, you will need to establish a permanent wired Ethernet cable connection from your modem/router to the Time Capsule. 
Then, configure the Time Capsule to "create" a wireless network using the same wireless network name, same security settings and same password as your modem/router network.
As a final step insure that the Time Capsule is configured to operate in Bridge Mode to work correctly on the network.

Similar Messages

  • Best configuration to extend wifi with Time Capsule & Airport Express

    In my house I have a Fritzbox wifi router on the ground floor as my primary internet access.  I have an ethernet cable going to the 3rd floor study where the Fritzbox signal is relatively weak.  I purchased a Time Capsule as a backup device, but also wanted to extend the Fritzbox wifi network by plugging the ethernet cable in to the TC.  I was not successful in extending the network, so I had to create a new network.  When moving from downstairs to upstairs, my iphone keeps the connection to the (now weak) wifi network and I have to manually change to the (stronger) TC wifi network.
    Additionally, I used to be able to successfully extend the downstairs wifi using my Airport Express (and also managed to have my speakers plugged into this for wireless usage), but do not want to additionally complicate my set-up.
    So, what is the best way to connect the following equipment, ideally with the same network name, to ensure I always use the strongrst signal automatically:
    Third floor:          iMac,    Macbook,   Time Capsule,  Airport Express
              Ethernet cable from ground floor to 3rd floor
    Ground floor:     Fritzbox wifi connected to internet

    You must configure the Bridge Mode setting as the very last step before you Update the settings, otherwise the setting will change automatically. 
    In other words, you can change the setting to Bridge Mode, but if you make any other changes before you click Update, the Bridge Mode setting will not take effect.
    Or, if you see any error messages about DHCP conflicts or Double NAT....the AirPort is not in Bridge Mode...even though you might think it is. Check the settings again.
    will I still be able to set up an additional 5GHz network in parallel?
    Yes

  • How can i extend a wireless network with time capsule

    How can i extend an existing wifi verizon wireless network with time capsule? the router is connected on the bottom floor. want to boost the signal to a home office on the top floor, four flights up. connect time capsule via ethernet cable to iMac on 4th floor? Do I have to start a second wifi network or can I set it to just boost the one I have? thank you

    How can i extend an existing wifi verizon wireless network with time capsule?
    It all depends on what you mean by "extend".
    If you plan to "extend" by connecting the Time Capsule to the Verizon router using a wired Ethernet cable, this can be accomplished.
    If you were hoping to connect the Time Capsule to the Verizon router using wireless only, unfortunately the Time Capsule and Verizon products are not compatible for that purpose.
    Check with Verizon to see if they offer an "extender" or "repeater" that could be located very close to the Time Capsule.
    This would provide both more wireless coverage and also allow you to connect the Time Capsule using an Ethernet cable from the "extender" or "repeater".

  • I'm trying to extend my wifi network with time capsule but it can't find the existing wifi network

    I'm trying to extend my wifi network with time capsule but it can't find the existing BT wifi network even though it is there with a good signal strength. The Time Capsule is connected to a Netgear router via ethernet.

    You will need to start over on the setup of the Time Capsule as follows:
    Disconnect any Ethernet cables that might be connected to the Time Capsule, but leave it powered on
    Hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. The reset button is located next to the AC power socket.
    Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
    Connect the Ethernet cable from a LAN <--> port on the Netgear to the WAN "O" port on the Time Capsule.  The Ethernet cable must remain connected at all times.
    Click the WiFi icon at the top of the Mac's screen
    Look for a setting of New AirPort Base Station
    Click on Time Capsule
    The example below shows an AirPort Express. You will see Time Capsule on your screen.
    That will get the setup wizard going. It will take a minute to analyze the settings, then display a screen that looks like this, except you will see a picture of the Time Capsule
    Network Name..........Type in the exact name that the Netgear wireless is using
    Base Station.............Type in a name that you want to call the Time Capsule.  Use something short and simple. Mine is TC, for example
    Password..................Type in the exact password that the Netgear wireless requires
    Verify.........................Verify the Password again
    Click Next
    The setup wizard will configure everything for you automatically.  When you see the message of Setup Complete, click Done.
    That's it.  Now you have one big "extended" network.  Technically, this is called a "roaming" network.

  • Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad "/Volumes/Data/MacBook Pro de Carlos.sparsebundle" ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.

    Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad “/Volumes/Data/MacBook Pro de Carlos.sparsebundle” ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.

    Try Here  >  http://pondini.org/TM/Time_Capsule.html
    Perhaps P 2  >  Time Machine could not complete . . . sparsebundle could not be accessed. (Error 109).

  • Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

    Hello -
    I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
    I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
    I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
    Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
    Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
    Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
    Thanks a lot,
    -TM
    AirPort Exteme:
    Time Capsule:

    Hello JuliaApple. Welcome to the Apple Discussions!
    You have several ways to configure both base stations for what you are trying to do.
    The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

  • Slow network with Time Capsule

    Hi There!
    We have a network at home consisting of a Time Capsule (to provide wireless to the house as well as to hold all of our iTunes content and use as a file server), two Mac Pro towers, a MacBook Pro, an iMac, and two Windows-based notebooks, and an Apple TV. We are NOT using the Time Capsule for backup.
    The problem we're having is that the network is incredibly slow. Trying to copy a large file over the network can take hours when it should only take minutes. And we can't stream shows/movies in iTunes from the Time Capsule because it pauses every one or two seconds to catch up. We also have business grade cable modem service but we can't do iChat videoconferencing without the audio/video completely dropping.
    We tried purchasing an Airport Express to extend the range of the signal (and even purchased a second one!) but those didn't help, either. The firmware on all devices it up-to-date. And the network is closed (no one is leeching).
    Are there any tools, either built in to OS X or another source, that can help us diagnose what's wrong with our network? What other things can we try to diagnose the slow network?
    Thanks!

    First of all, be aware that the more devices you connect to a wireless network, the slower it goes. In addition, if you have devices that only work at B or G speeds, all devices on the network slow down to the slowest device.
    For example, when you have a 300mbps N device and a 11mbps B device connected to the same network, they'll both go at a maximum speed of 5.5mbps. You are limited to 11mbps because of the B device and then further limited to 5.5mbps because there are two devices sharing the total (11mbps) bandwidth.
    As far as testing out your current connection, try these:
    1. On a mac, you can hold down Option and click on the airport/wireless icon. This will show transmit rate and other information. The maximum transmit rate for N devices is 270, G: 54, B: 11. If the transmit rate is very low, this indicates a poor wireless signal
    2. Change the wireless channel used by your time capsule to something else. Try them all to see what gives you the best wireless signal
    3. In the airport utility, select the time capsule, go to manual setup, go to advanced, click on Logs and Statistics, then click Wireless Clients. This shows the transfer rate, noise, and signal for each device connected to the time capsule.
    4. Download iStumbler. This mac application will show other wireless networks in the area and what channel they're using. It is typically not good to set your network to use the same channel as others in your area.
    5. Download some sort of application that shows transfer speeds (like iStat Pro). Test transferring large files between computers to see how fast it goes with different setups.
    There's a few things you can do to improve wireless performance when bogged down with too many devices:
    1. Turn off any wireless devices not in use. If it's on, it's using bandwidth space even though it's not transferring data.
    2. Use multiple routers or a dual-band router to create separate networks. For example, you can make the time capsule make a 802.11N-Only network which will only the new N devices will connect to. Plug an express into it and make it create another network (G-only or B/G-only). Keep plugging in additional routers and make new networks as needed.
    3. Replace older B/G devices with N devices if possible.

  • How to Sync iPhone/iPad with Time Capsule (wirelessly)

    Hi - I am wondering if there is way to sync my iPhone or iDevices with Time Capsule wirelessly.  Please let me know if there is and how?
    Thanks in advance..

    The iOS devices....iPhones, iPads, iPods, etc.....sync to iTunes on your computer or to iCloud.
    See this Apple support document:
    http://support.apple.com/kb/ht1766
    It is not possible to sync iOS devices directly to the Time Capsule.

  • IPad2 in network with Time Capsule

    will i be able to use the time capsule for a iPad as a external memory and transfer file from one to the other?

    No, the iPad only connects to the internet sharing option of your network router (Time Capsule) through wifi. All other features of your router can't be accessed by your iPad. I have both also, so it would be nice. Try making that suggestion to Apple in the support section of the website. Who knows? We might get lucky. If this answer is satisfactory, please consider marking it as answering your question.
    Thanks

  • Creating wireless network with Time Capsule

    hi, I just have couple of questions before installing the time capsule;
    so far I have been using cable DSL modem, so my question is - is it possible to set time capsule as a wireless router, or does time capsule still have to be connected with DSL modem and then act wiresly with iMac?
    I was thinking if i could replace cable DSL modem with time capsule
    thank you

    The Time Capsule has to be connected to your DSL modem. Otherwise you won't be able to connect to internet.

  • Setup a wired network  between Time Capsule, Airport Extreme and Express

    I currently have a Time Capsule, Airport Extreme N and an Airport Express N. They are currently connected wirelessly via the "extend network" mode. So I do have wireless connection throughout my home but I notice that it is slow especially compared to gigabit Ethernet. I now like to do the same but then connect the three devices over Ethernet as I have on each floor also Ethernet connections available that are connected via a wired switch.
    How can I configure the three devices in such a way that they use the gigabit Ethernet wired connections as their "backbone" and then give wireless access to each floor as if it is one wireless network, and where I can connect other wired gigabit devices via the time capsule and airport extreme Ethernet ports?
    I have one Internet connection that comes via Ethernet from my cable modem. This is now connected to my time capsule who creates the internal network and assigns internal IP addresses.
    Can anybody advise how to configure each device? And to which ethernet port I should Airport Extreme?
    Thanks
    Alexander

    Welcome to the discussion area, Alexander!
    +How can I configure the three devices in such a way that they use the gigabit Ethernet wired connections as their "backbone" and then give wireless access to each floor as if it is one wireless network, and where I can connect other wired gigabit devices via the time capsule and airport extreme Ethernet ports?+
    You will be setting up what is known as a "roaming" network using the etherent backbone for your network. This will produce the best possible bandwidth on your network for both ethernet and wireless connections.
    _On the Time Capsule_
    Open AirPort Utility - Click Manual Setup
    Click the Wireless tab below the row of icons
    Remove the check mark next to "Allow this network to be extended" (This is only checked if you are extending your network using wireless only and you will be using ethernet to connect your devices, not wireless).
    Update to save changes and the Time Capsule configuration is complete.
    _On the AirPort Extreme_
    Connect an ethernet cable from one of the LAN <-> ports on the Time Capsule to your ethernet switch. Then connect another ethernet connection from the switch to the WAN (circle icon) port on the AirPort Extreme.
    Open AirPort Utility - Click Manual Setup
    Click the Wireless tab below the row of icons
    Wireless Mode = Create a wireless network (Not extend as you might think. Extend is only used if the Time Capsule and AirPort Express are connecting using wireless only)
    Wireless Network Name = Exact same name as your AirPort Extreme wireless network
    Radio Mode = Same setting as your AirPort Extreme
    Channel = Automatic
    Wireless Security = Exact same setting as your AirPort Extreme wireless network
    Wireless Password = Same password as your AirPort Extreme wireless
    Confirm Password
    Click the Internet icon
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Update to save changes and configuration is complete
    _On the AirPort Express_
    You can connect an ethernet cable from the switch..or..from one of the LAN <-> ports on either the Time Capsule or AirPort Extreme, whichever is easier.
    Set it up exactly the same as the AirPort Extreme above and update to save changes.
    Power off the Time Capsule, AirPort Extreme and AirPort Express for a few moments. Then power up the Time Capsule first and let it run a moment, then power up the AirPort Extreme and then the AirPort Express.
    If you have a laptop running Leopard or Snow Leopard, you can move your computer around and check to see which device it is connecting to for wireless. Hold down the option key while you click on the fan shaped AirPort icon at the top of the screen and look for the BSSID. That is the AirPort ID of the device to which you are connected at the time.
    To get the AirPort ID of each of your Apple routers, open AirPort Utility and click on a device on the left. On the right, you'll see the AirPort ID for that device.
    For ethernet connections, you can plug into an available port on the switch, the Time Capsule, or the AirPort Extreme.
    You should be all set. Please post back on your progress.

  • Will time capsule support Airportextreme 802.11ac and an external hard drive on my iMac (late 2011) with Yosemite?

    I want to set up a new Airport extreme 802.11ac with an external drive as a wireless back up for time capsule. I have an iMac (late 2011) running Yosemite. Will this work, and if so, what are the recommended external hard drives that work the best.
    The rationale for not buying a time capsule is that I have had 2 hard drive failures and replacements on both my iMacs and I am afraid if the time capsule drive fails, it will be yet another apple hard drive that has failed on me. I currently back up on G drive external drives.

    Apple does not make hard drives. They may be using the same drive that's in your G-Drives.
    You can backup to an external drive connected to the newest AEBS via USB.

  • New MacBook/Time Capsule not accessing 802.11ac

    I have a new Time Capsule I am using as a base station.  I have a new MacBook Pro.  Both were purchased this week.
    I also have an old MacBook Pro from 2008.  Both MacBooks connected via wi-fi to the base station.
    When running upload and download tests, the old MacBook is slightly faster than the new MacBook.  Since the Time Capsule and the new MacBook are supposed to be accessing 802.11ac, and the 2008 MacBook Pro can't, there is obviously something wrong.
    How can I check to see if the Time Capsule and new MacBook are using 802.11ac correctly?
    Thanks.

    When running upload and download tests, the old MacBook is slightly faster than the new MacBook.
    This is not a valid test.
    Upload and download tests to the internet.. are totally constrained to the internet speed.
    Test copying a file to the TC hard disk.. even that is not a great test but better than internet.
    If you clearly have issues with speed on the new Mac.. even copying file is the same speed as the old ..
    Hold down the option key and click on the wifi fan on the upper menu area.
    It will then show more details of the connection.
    By default the Mac will connect to the strongest signal.. not fastest.
    Since even one room away 2.4ghz is generally stronger signal than 5ghz it will tend to use 2.4ghz.
    The simple solution is to name the two wireless bands differently so you can FORCE it to join 5ghz.

  • Problems wirelessly extending 5Ghz network with Time Capsule

    Summary:
    My Time Capsule wirelessly extends a 5Ghz "n" network provided by my Airport Extreme, but the Time Capsule frequently fails and stops providing Internet access to connected computers. I'm not sure if the problem is with the Time Capsule or with the Airport Extreme it's connecting to.
    Setup:
    Airport Extreme (dual band) connected to cable modem. It provides a 5Ghz "n" network and a 2.5Ghz "b-g-n" network. This is in the bedroom.
    Time Capsule (non-dual band) joins the 5Ghz network and extends it. This is in the office, maybe 40 feet away, line-of-sight. There is a laser printer connected to the Time Capsule via ethernet.
    My MacBook is set to join the 5 Ghz network, and since it's in the office, it ends up joining via the Time Capsule. This is the desired behavior, as connecting through the Time Capsule seems to result in the fastest possible backup speed.
    There are no wireless devices, such as cordless phones, in the house. The microwave is NOT in use when the problems arise.
    *The Problem:*
    Frequently, the MacBook loses its Internet connection, though it is still connected to the 5Ghz network through the Time Capsule. When this happens, it can only see the Time Capsule it's connected through (and other devices that are connected to it) but no other devices on the network.
    When this happens, other devices that are connecting to the 5Ghz network through the Airport Extreme can no longer see the Time Capsule or any devices connected to it, such as the laser printer or my MacBook. This includes the living room computer, which has never been able to complete a backup due to this problem.
    The Time Capsule's and the Airport Extreme's indicator lights both stay green.
    If I change the Macbook's connection to the 2.5Ghz network, it can see the devices connected to the Airport Extreme, but can no longer reach the Time Capsule.
    *Unsuccessful Solutions:*
    This was happening in a previous incarnation of the network, when I had a non-dual band Airport Extreme providing the main network, the Time Capsule connected via 5Ghz, and an Airport Express connected via ethernet to the Time Capsule to provide a b-g network.
    I replaced the Airport Extreme with a new dual-band unit to simplify the setup, but it did not solve the problem.
    Since the Time Capsule seemed to be the weak link in the network, I reported the problem and got the unit replaced, but the problem still persists.
    I've reset both the Airport Extreme and the Time Capsule to their factory settings numerous times, and set them up again from scratch (no imported settings). I've gone in and made sure that there were no WDS settings leftover from the earlier configuration, as the 5Ghz network does not need it to extend itself.
    *Plea for help:*
    Is anyone else experiencing a similar problem?

    Update
    The other day, I modified the setup so that the Time Capsule doesn't extend the wireless network wirelessly, only through Ethernet (so the attached printer will work, but the computers will connect directly to the AEBS. The Time Capsule stayed connected long enough for me to do a full backup (125GB) from the downstairs computer.
    I thought I had it "solved" (though extending the 5Ghz network would be preferable so the office computers can have faster backup speeds.)
    But yesterday, I went to print to the Ethernet-attached printer, and it got only one page out before it disappeared off the network again, and the print job failed. I noticed it did it again, today.
    So the problem is not tied to wirelessly extending the network.

  • I would like to extend my network with time capsule

    I have and airport extreme. I just bought a time capsule. I would like to keep the airport connected to the modem and use the time capsule to extend my network range and backup. The reason I want to set up my network this way is so I can "hide" the time capsule in another area of the house. Just in case of theft. I would rather have my back-up not located on my desk with all of my other equipment.
    When I was setting up the time capsule, it looked like it was doing exactly what I wanted it to do. Then it got to the last step, restarting. The device restarted, the green light came on, but it never showed up in the airport utility dock again. I had to reset it and start over. I ended up setting it up off network and connecting my computer with an ethernet wire and doing my back-up. Now, I have to get it set up wirelessly today. Otherwise, I just bought a very expensive hard drive and would not get the benefit of the wireless back-up.
    The guy at the store said this should be easy and it appeared like it was easy, but, something just isn't right.
    Any suggestions? Thank you

    In order for the Time Capsule to "extend a wireless network", the AirPort Extreme must first be configured to "Allow this network to be extended".
    Did you remember to enable that option on the AirPort Extreme before you tried to configure the Time Capsule to "extend"?
    Check your settings on the AirPort Extreme as follows:
    Open AirPort Utility, select the AirPort Extreme and click Manual Setup
    Click the Wireless tab just below the row of icons
    Make sure that you have a check mark entered in the box next to "Allow this network to be extended"
    Update to save settings on the AirPort Extreme
    Then, configure the Time Capsule to "extend a wireless network"
    Post back if you need more tips on this.

Maybe you are looking for