HT3728 I do not need another wireless network but want to use the airport express for printer access only.  Can this be done and how?

I do not need another wireless network but want to use the airport express for printer access only.  Can this be done and how?

You can configure the AirPort Expess to "Join a wireless network" and enable the Ethernet port so that Ethernet devices will be able to connect.
In order to print from the iOS devices, you will need to have an application like Printopia installed on your Mac. The Mac must be active when you want to print.
More details here: Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
There is a free trial available for Printopia, so make sure that it will work before you buy the AirPort Express.

Similar Messages

  • TS1315 I have just purchased the new iPad with the camera connection kit. I just want to bewant to be able to insert my SD card into the Pad and only view my photos, not import them to the pad.  Can this be done and how do I do this.  Please advise.  Thaj

    I have just purchased the new iPad with the camera connection kit.  I just want to be able insert my SD card into the Pad and view my photos, not import them.Can this be done and how?  Please advise.  Thank you.

    See this article: iPad: Using the iPad Camera Connection Kit
    No, this canot be done, afaik. When your camera or card is connected, you will see the thumbnails in the camera pane, but not full size preview. So to browse your photos on the iPad you will need to import them to your camera roll. But you need not delete them from the camera or card after importing, so you might simply import selected photos to your camera roll from the camera grid and then delete them again from the camera roll after importing and browsing, without removing them from the card/camera.
    Regards
    Léonie

  • I have just purchased the new iPad with the camera connection kit.  I just want to view my photos from my SD card, not import them to the iPad.  Can this be done and how is it done?  Please advise.  Thank you.

    I have just purchased the new iPad with the camera connection kit and want to be able to view my photos full screen and not import them.  Can this be done and how?  Please advise.  Thank you.

    When connecting the Camera Connection Kit to a camera or SD card all you see are the thumbnails of the photos. I suggest you review those, select the photos you might want to see full screen, then import them to your iPad. After viewing them you can always delete them if you no longer want them on your iPad.
    I also suggest Keeping the photos on your camera or SD card until you import the to your computer and back them up to at least one other location.

  • How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

    Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

    Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

  • I want to use the Airport express to have wireless music through a home amp and speakers.

    My problem is that I have a wireless router (from Telstra - Australia) on one end of the living room and then the stereo amp at the other. It is my understanding that the only way to connect everything is to have the wireless router plugged into the airport express and then the amp connected to the airport express my the rca cable. Is there another way as I do not want a rca cable running the length of my living room.
    What i am trying to say is can the wireless router (from Telstra - Australia) talk to the airport therefore meaning I can have the airport sitting behind the stereo out of sight with no massive cables in my living room?
    Help please..

    Yes, simply have the Express "join" your existing wireless network in client mode.

  • I have 220 photos on my camera. I want to create 6 different folders for a download. Can this be done? I need instructions on how to do this.

    I have 220 photos on my camera to be downloaded to Lightroom. I want to organize them in 6 different folders. Can this be done?  I need instructions to do this.

    You cannot direct a single Copy Import operation from your card into multiple folders, but you can either import multiple times, selecting different photos each time from the Import grid, and specifying a different destination, or you can import everything into one folder, then use drag-and-drop in LR with different selections of photos into various folders you create within LR’s Library module folder panel.  As long as you do the folder creating and photo moving within LR then LR will know where the photos have been moved to.
    What I do is move the photos into multiple folders on the card, itself, outside of LR, using Explorer’s thumbnail previews to guide me, then drag-and-drop those folders to their final destination on my hard drive still outside of LR, then do an Add Import, by dragging and dropping those folders onto LR Library’s central area, so that’s another way.

  • Can I use The Airport Express as a router only. Need your help

    Hi there,
    I need to get some help from anyone for a good wireless router for a MacBook Pro. I want to know if anyone had a Airport Express as a router only of some help in this matter.
    Hope to get your feedback. Thanks
    From Samantha Kellar

    Can you explain a bit more?
    The Apple Express is a router. The new Apple Express has a LAN port so you can have a device on a wired connection.
    Are you talking about removing the modem and only having the Airport Express?

  • Do I need to connect to a modem to use the AirPort?

    Do I need to connect to a modem to use the AirPort Express? I currently have a PC and thinking about getting a Mac.

    To use WiFi only (means as a wireless local area nework only), you do not need a modem but as most of us do, you need to connect it to some type of modem (cable, DSL or fiber optic) in the ethernet port at the bottom to share the Internet connection using WiFi.

  • I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    See if the iPad will accept the password after you restart it. It's worth a try.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    You could also try a reset as well.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Using the AirPort Express to Join an existing Wireless Network

    Hello,
    I am hoping you can provide me with some help on this... I recelty acquired a PowerMac G4 with a 450 MHz processor, CD-RW/DVD-ROM drive, Zip Drive, 1 GB RAM, and two 40 GB HD... The system has OS 10.4 installed, and it is has built-in Ethernet...
    I was told I could use the Airport Express to connect to an existing wireless network, so I purchased an Airport Express base Station... Thing is, to e honest, I am having a bit of a problem getting started...
    - First, to connect from the AirPort Express to my G4, do I need a special kind of Ethernet cable, or will the usual kind do?
    - Second do I need to istall the software first, or have the Airport express connected to the G4 before I do?
    How would I go about setting this up, step-by-step?
    Any information would be appreciated...
    Thanks for your time...

    OK, thanks. Hopefully, the Netgear is creating a wireless network using WPA/WPA2 security. That will make it much easier for the AirPort Express (AX) to join the wireless network. It can join networks with using WEP security, but password issues almost always arise using WEP.
    Since you must enter the exact security settings and password for the wireless network, it would help tremendously to know this in advance. Otherwise, it's going to be a series of "trial and errors" and likely frustration, later on.
    When you have a moment, check the security settings on the Netgear router.
    It might be one of the following: WPA2 Personal, WPA/WPA2 Personal, WEP 128, WEP 40.

  • Can I use the Airport Express to create a secure wireless network in a wireless-only hotel?

    Can I use the Airport Express to log onto an unsecured hotel wireless network, without an ethernet cable, to create a secure wireless network for my MacbookAir, IPad, IPhone, etc.? If so, how is that done?

    will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
    The bottom line with a single AirPort Express is no.
    The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
    As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
    In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
    However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

  • Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
    If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

  • I now have internet thru AT&T Uverse with their wireless router.....do I still need to use my Airport Express for my 2 MACS or can I just unplug it?

    I now have internet thru AT&T Uverse with their wireless router.....do I still need to use my Airport Express for my 2 MACS or can I just unplug it?

    You can just unplug the express and use the Uverse wireless or ethernet directly to it.

  • How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

    How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
    What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
    Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

    FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

  • √using successfully airport express for internet/ when hooking up new airport extreme light glows green, but does NOT appear in devices seen????airport wifi devices

    using sucessfully airport express for internet
    when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
    wanting to use extreme at base and express in another part of the house

    How is the express getting internet? What modem is it plugged into?
    How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
    IPv6 is also needed.. turn on local link.

Maybe you are looking for

  • New Infinity & BT Vision customer - but no connect...

    Hello I am a new customer who joined BT to receive the full Infinity broadband, phone line and full BT vision for £40 pcm + line rental paid in advance. The engineer came to install the service on 19/4/11 and did get all the equipment installed but s

  • Can't Install WAAS in WAVE 574

    Hi, When I turn on WAVE 574, it said "No system disk/ disk error" (something like that). So I assume, there is no OS installed in the disk. I downloaded WAAS 4.4.1 rescue CD, and after a while, It said, "Can't determine boot device! Platform initiali

  • Something strange happening with my fonts

    Hi there, Please see the link to this pdf. http://mssociety.ca/bc/pdf/2012_Footnotes_1_print.pdf The PDF is supposed to have all the fonts embedded, but page 1 is showing up wonky - sometimes. Some of the fonts on page 1 are incorrect. They should al

  • Installing and Starting the Application Designer

    Hi, I am trying to integrate peoplesoft FSCM with oracle IPM. 1. I have installed the "PeopleSoft VM Templates for FSCM 9.1 Release Media Pack for x86 (64 bit)" successfully by following the instructions in [http://docs.oracle.com/cd/E29416_01/psft/a

  • Doubts in the following program about return

    class a public boolean methoda(String ab) String k; k = ab; System.out.println(" methoda in class a " + k); return true; class b extends a public void methoda() System.out.println(" methoda in class b "); public boolean methoda(String he) System.out.