HT3728 I need to reset the name of the network because the name was too long. What do you suggest?

I have a fully functioning Air Port Express. The only item which does not cooperate is my printer. When I insert the network name, all letters are on the same line except for one letter. I think this is causing the problem. I think if I shortened the network name that would solve my problem. Any suggestions?

Remove any spaces that you have in the name at this time. Otherwise, shorten the actual name to fit the requirements. "Wireless" certainly works if you are not sure how to name the network.

Similar Messages

"Copying Music failed. The filename was too long or invalid." for Mac

I'm getting this error when attempting to move itunes libary to new HD (Drobo FS)
"Copying Music failed. The filename was too long or invalid."
Are there any Apps or scritps i could run to locate these files to correct/delete?

Unconsolidated should now give you a much shorter list, presumably the difficult track will be either first or last in this list...
I've written a script called DeDuper which can help remove unwanted duplicates. See this thread for background. You'll probably have to disable the progress bar again.
It only works on files connected to iTunes that have identical tag info. If you're not certain it might pay to make sure first using iTunes Folder Watch to scan for files that are in the media folder but not in the library. It also has a "scan for dead tracks on startup" option with detects missing files.
tt2

"Copying Music failed. The filename was too long or invalid."

I've been trying to 'consolidate library' inorder to get all my music held and managed under Itunes so I can delete it from other places on my computer & avoid holding multiple copies (in line with Chris CA's guidance in this thread https://discussions.apple.com/thread/2812666?start=0&tstart=0)
All goes well until I get to the 'consolidate library' step, it starts off copying files & seems to be going alright, then at some point I get the error message :"Copying Music failed. The filename was too long or invalid."
This error message doesn't help me much as I've no idea where to go from here. I've tried consolidating library twice now and got the same message each time.
I'm assuming there must be some way to either fix it or identify the file causing the issue?
Thanks

Unconsolidated should now give you a much shorter list, presumably the difficult track will be either first or last in this list...
I've written a script called DeDuper which can help remove unwanted duplicates. See this thread for background. You'll probably have to disable the progress bar again.
It only works on files connected to iTunes that have identical tag info. If you're not certain it might pay to make sure first using iTunes Folder Watch to scan for files that are in the media folder but not in the library. It also has a "scan for dead tracks on startup" option with detects missing files.
tt2

I have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?

i have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?

Does the regular Firefox 8 release version work or does the version crash as well?
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I want to change the show window of Labview, what do you suggest?

Hi..............................
I saw Labview doesn't have much controls to make the show window beautiful .am I right ? if So, what do you suggest to improve this show window (Front Panel)?
I heard there is a good program works on changing show window which is (active-x) .Is it right, Is it compatible with Labview 7.1.1, where I can find to download it and if you can give me some examples to know how to deal with it ?
If I am Brazilian, I will not pride that we achieved five world cup or we are the lonely team that never absent from world cup, I will just pride that ronaldinho is Brazilian.

You do have the ability to create good user interfaces with LabVIEW.
The main problem is what do you, or your customer consider a good user
interface.
The first thing I would suggest is to start using the "Dialog Control"
controls for your front panel. This set of controls pick up their style
from the operating system, so they will match the rest of the system
applicaitons.
Another thing is limit the use of color on the front panel. One persons
idea of a nice shade of blue can be another person eyesore. Instead,
use the decorations for grouping of controls.
I would stay away from ActiveX. It's interface is quirky at best and there is a lot of overhead involved.
Just to show it's possible, the attached images are screen shots of
user interfaces I've designed with LabVIEW. The first two use the
Dialog Controls, and the third uses standard controls and color at the
customers request.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
DMI_Tester.gif ‏73 KB
DIIDatalogger.gif ‏102 KB
Trackerr.gif ‏115 KB

Hard drives not showing up need to reset the access??? how do you do that

i have an internal hard drive & an external hard drive and in the info section of both it was changed to no access. I tryed to change it back to read & write but when i close it out and go back in the info it still says no access. I tryed restarting the computer but no the 2 drives aren't showing up on my desktop. how do i change those permissions so i can get access to my hard drives??? please help

Choose Go to Folder from the Finder's Go menu and enter /Volumes/ as the folder's location. Next, open the Terminal in the /Applications/Utilities/ folder while keeping the Volumes folder open. Type the following into the window:
chmod 755
followed by a space. Drag one of the volumes in question into the Terminal window and press Enter; repeat this with the second volume. Log out and back in.
(10922)

HT3964 I am getting the error message "No AirPort card installed" Restarting my iMac desktop does not solve this (Apple help says I need to reset the SMC this way, but nothing changes. Can somebody advise, please?

I am getting the error message "No AirPort card installed" Restarting my iMac desktop does not solve this (Apple help says I need to reset the SMC this way, but nothing changes). Can somebody advise, please?

Thanks for the flag J.K. - they contaced me and solved my problem. On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!

I deleted my old email address and now I can't acess icloud because I can't remember my password to the icloud account. It is not allowing me to log in obviously and now my old email is showing under the settings now do i need to reset the iphone?

I deleted my old email account and when i went to change everything on my iphone it still shows the old email even though i created a new apple id. I also can't remember the password and now can't access icloud. Do i need to reset the phone?

If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

I have a problem. My Apple ID is not my icloud email address my Apple ID is my msn account, but I need to reset the password for my icloud email because I can't remember what it is. How do I do that?

I have a problem. My Apple ID is not my iCloud email, my msn is my Apple ID, but I need to reset the password for my icloud email address because I can't remember what it is. How can do I reset my iCloud emaill password when it's not my Apple ID??

Your iCloud and @icloud.com login ID is an Apple ID. Go to http://appleid.apple.com and sign in with the ID you use to sign into iCloud (you can check this by going to http://www.icloud.com and signing in there).
Click 'Password & Security' in the sidebar and you will be able to change the password.
HOWEVER
Before you do this you must turn off 'Find My iPhone/iPad/iMac' if you have it enabled on any of your devices, otherwise you will land yourself in difficulties.

My 3G unlocked iPhone is not syncing mail or contacts from my mac book pro, using Lion. I am able to get a calendars and music, only. I get the message that I need to reset the password which I have done 3x's on the phone and on the Apple server.

My 3G unlocked iPhone is not syncing mail or contacts from my mac book pro, using Lion. I am able to get a calendars and music, only. I get the message that I need to reset the password which I have done 3x's on the phone and on the Apple server.

Good to know that, but what can I do to get the mail and contacts downloaded from Icloud onto my Iphone? I am told that the password needs to be reset and I have erased and reset it 3x's already? Should I Restore All Settings or Restore Network Settings or will that result in a situation where I have to have it re-unlocked again? GRACIAS!

After I hv upgraded os 6 on my iPhone 4, iPhone hung up at least one per day. After u press "End" 2 times( i used to do this in the old os) or when u slide to unlock - the screen suddenly enlarge . I need to reset the phone whenever this happen. Pls help

After I hv upgraded os 6 on my iPhone 4, iPhone hung up at least one per day. After u press "End" 2 times at fast speed ( i used to do this in the old os without problem) or when u slide to unlock - the screen suddenly enlarge . I need to reset the phone whenever this happen. Pls help

I Have fumbled all day to this resolved, I'll run the battery down and see what happens afterwards. This is not good !

Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work. Any ideas without needing to reset the ipod?

Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work. Any ideas without needing to reset the ipod?

- Have you tried when connected to other networks? Maybe the router is blocking the ports used by Safari and the other apps.
- What kind of network are you using? a personel or bussines?

I was downloading updates for ipod touch 2nd gen and twice when I was to processing files stage it clicked off. There was no message on whether it was done or what I was to do next. I needed to reset the ipod. Now what do I do?

I was downloading updates for Ipod touch 2nd gen and when the process was to the processing files point the screen changed and I wasn't given any idea as to whether the process was complete or not and if it was what was to be done next. I needed to reset the Ipod and now I am wondering what to do . Spend another Hour downloading and whatever amount on processing files and end up where I am now . Whats the next step in finding out what to do? This was the second attempt to do this with the first try happening the same except I am not sure how long the processing files part was.. Any suggestions as to what to try will be greatly appreciated.. Thanks

Likely a batter problem since high temperatures destroy a battery. I wold make an appointment at the Genius Bar of an Apple store to see what they say. It is free except for your time.

I am selling my sons ipod and i need to reset the ipod from the itunes account because there is a password that no one remembers

I am selling my sons ipod and i need to reset the ipod from the itunes account because there is a password and no one remembers it. I am not an expert ( or even close) on the itunes stuff so I have tried everything I can see.

If you have a passcode to the screen lock that you've forgotten and your device is running iOS 6 or earlier, restore the device from the computer to which the device is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034
If your device is running iOS 7 and you set up Find My iPhone (iPad/iPod), however, then it has the Activation Lock on it and you'll need to enter in your Apple ID and password after erasing to be able to restore the device:
http://support.apple.com/kb/HT5818
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

I need to reset the confirmed quantity in the schedule line

Hi all,
i have this requirement:
with VA01 / VA02, in the schedule line, I need to reset the confirmed quantity, for that rows which have delivery date 30 days
over today.
Does anybody know if I can use the routine no. 101 (vofm -> Requirements -> Subsequent functions -> Reqs. availability) and give me an example to di this ?
I also tried to implement the user exit move_fields_to_vbep in mv45afzz, but not succeed to obtain my goal.
I thank you in advance.
Regards.

Settings/iTunes and App Store. Tap on the ID you see there and sign out then log in with the new ID

HT3728 I need to reset the name of the network because the name was too long. What do you suggest?

Similar Messages

Maybe you are looking for