HT3728 My time capsule appears to have died - what's happening?
It doesn't power up and no matter what I do, can't get it to do anything!
How old is it.. ??
Gen 1 and Gen 2 are dying in droves now.. any that missed the 2year appointment with their maker have reached the end of the line.
Google search dead Time Capsule.. you will be dismayed at the number of people.. !!
Just to show even apple discussions has seen plenty of posts about the issue.. these are the two most active threads.. but there are literally hundreds of threads.
https://discussions.apple.com/thread/2129872?threadID=2129872&tstart=0&messageID =10361895#10361895
https://discussions.apple.com/thread/2091667?threadID=2091667&tstart=0&messageID =10357178#10357178
If you TC is a more recent one.. and still covered by warranty or you have applecare on any computer.. ring apple to arrange replacement if possible.
Similar Messages
-
I keep getting 'an unexpected error occurred. Try again.' error message when trying to reconnect to my AirPort Time Capsule. I have soft and hard reset and, eventually, factory reset the device. What do I do to correct the error?
Hi Philjp,
If you are having issues connecting to your Airport Time Capsule, even after a factory reset, you may find the following article helpful:
Apple Support: AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
http://support.apple.com/kb/TS4597
Regards,
- Brenden -
My time capsule green light turned yellow.What do I have to do?
My time capsule green light turned yellow.What do I have to do?
This is not really the correct place for your enquiry. However, here are a couple of links that appear to deal with your question.
Time Capsule amber light: Apple Support Communities
HT3728 My Time Capsule light keep...: Apple Support Communities -
Time Capsule appears twice in Airport drop down menu
Menu Bar > Airport drop-down menu: My Time Capsule's wireless name shows up twice in my list of wifi sources. Once in the group with all the other routers and again in a group called "Devices".
Long story short…
I start with a perfectly functional, WPA/WPA2 password-protected Time Capsule: Over a year old. Two MbP's using it for Time Machine backup. Connected to a 1.5TB MyBook external HD via usb. Doubles as my wifi router. Everything's connected to it, including my wifi-enabled printer. Works great. No issues.
I get this idea in my head that I need to hide my wifi signal. I figure it out and ¡Viola! Hidden. Then I try to add my wifi-enabled printer to the list of allowed devices in "Access Control". I hit a big snag and can't figure out how to get it to connect (btw, don't buy a Brother printer. Pure crap). So, I give up and revert permissions back to visible, password-protected state.
Skipping irrelevant issues that I already resolved, I now have the wireless name of my Time Capsule appearing twice in the airport drop down menu. It appears with all the other wifi sources my machine detects AND appears at the bottom under a new category called "Devices".
All I want is to have things back the way they were and this anomaly in the drop down menu is a constant reminder that I #1 failed and #2 bought a crap printer.
(Long story long, I guess. Sorry.) How do I delete this "Devices" group from the airport drop down menu?Stilts McCoy wrote:
Menu Bar > Airport drop-down menu: My Time Capsule's wireless name shows up twice in my list of wifi sources. Once in the group with all the other routers and again in a group called "Devices".
You might find useful advice in this thread:
http://discussions.apple.com/message.jspa?messageID=12156248
If you want to post a reply, please do so to this thread, not the other one. -
I have a network with two Macs, a PC, a bunch of iPod Touch and iPhone devices, a wireless HP printer, and a Time Capsule on it.
The Time Capsule appears fine as a Time Capsule in the Finder side bar, however, it does on occasion, as it is now, appears also as a PC named "time-capsule". The Time Capsule's name is just "Time Capsule". I can access the HDD just fine through the "time-capsule".
It's not really anything major or bad, it's just a rather annoying problem that I personally don't think I should be having with an Apple product.
Anybody know why it appears like this, or how to fix it?Have some of the laptops changed to Lion? I think there is an issue with Lion and the TC. But it could affect the TC and all the computers.
Not sure what else could affect it but I suspect the issue could just be age. Since it is a fairly vital piece of hardware to your business, do you have other backup strategies in place? Perhaps it would be worth taking the TC into apple genius and see if they can figure out the issue, although it seems to not be immediate which makes it hard to discover. You should have apple care on it with all those laptops.. i hope. -
iMac 10.5.8 ... Time machine died. Bought new Time Capsule2TB. Ordered 10.6 ... Not recommended to install 10.6 w/o prebackup ... Current utility for airport won't do with the new Time Capsule. ... What to do?
You are in the typical catch22.. you cannot use the TC without setting it up.. you cannot set it up without Lion.. so you can install the latest utility.
Do you have any reasonably current iOS devices.. they can run the iOS version of the utility.. that will allow you to set up the TC.
Or invite a friend with a laptop running at least Lion
Or take the TC back and get a plain USB hard drive and backup to that. -
How can I get access to my Airport Time Capsule while I have forgotten my password
The harddisk of my iMac had crashed, lately. After te repair the iMac had to configured again, also the connection to the Airport Time Capsule.
I have my password to connect to Time Capsule forgotten. Is there a way to install the Time Capsule again with a new or without a password.AirPort Utility 6.x- If you forget your base station, AirPort Time Capsule, or network password
-
i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?
You probably can, but this type of configuration is not recommended or supported by Apple.
Two cautions if you want to try this:
1) The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
2) Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule. Two "hops"......even if the computer is located close to the Time Capsule.
If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported. -
i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB
You just need a powered hub.. if you already use one then fine.
Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
Pick whatever size suits.. nowadays 2TB are most economical.
WD, Seagate have goobled up all the minor players.. so pick one.
Whatever suits your budget and asthetics.
NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external. -
My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load
Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility. -
I recently upgraded my OS to Lion 10.7.4. I also just upgraded from a 1st Generation Time Capsule to a 4th Generation Time Capsule. I have an Airport Express (Version A1264) that I formerly used to extend my wireless network. Airport Express no longer connects to my network. I have downloaded Airport Utility 5.6 to try and configure, but with no luck.
TC first gen was not simultaneous dual band. So.. it's probably best to factory reset your extreme and then tell it to extend again.
-
My 'old' files have been backed up onto time capsule (Leopard), I have upgraded to Lion (thro snow leopard) and now checking back to retosre some old files i can't see or access beyond the date I upgraded to Lion? Help please?
Use the manual methods.. but it is possible for TM to wipe the old files in trying to fit into the space.
Try Q16.. but read all the section 14-17
http://pondini.org/TM/FAQ.html -
Time capsule appeared on Finder on both "shared" and "device". now i can't see it on devices
time capsule appeared on Finder on both "shared" and "device".now i can't see it on devices
It will only appear in devices if you mount the drive. This should happen automatically when Time Machine starts.. but you can manually mount the share by just clicking it.
-
Time capsule appears twice on time machine
Hi, since a few days my time machine keeps getting confused because time capsule appears twice. It is the same time capsule and the same backup data but occasionally time machine postpones the backup because it can not connect to the disk. When I hover my pointer over these two icons I see the addresses: The top one appears as afp://xxxx-xxxxx-Time-Capsule.local/Data whine the bottom one (with the wifi icon) appears as afp://xxxx%20;AUTH=SPRxxx%20xxxx%20Time%20Capsule._afpovertcp._tcp.local/Data. Time machine behavior is erratic, sometimes it refuses to connect to the second instance while in other times it does. And this happens also with another Mac backing up on the same time capsule. Any ideas?
Yes please relocate to 10.9 I did not pay attention to the OS version. Now I am using an Apple Time capsule over my home network as I am backing two Macs in it and it has been working flawlessly for almost two years. Having said that it is now working fine switching from one to the other instance (no clue of what drives the selection, I made these two screen captures at a few seconds interval as I was writing this post)
As you can see the "available" disks has changed.
I went back to Time Machine Buddy and pulled up one of the failure reports:
couldn't determine volume-uuid of mount point: /Volumes/Data-1, error: Error Domain=NSCocoaErrorDomain Code=4 "The file “Data-1” doesn’t exist." UserInfo=0x7fdd42714030 {NSURL=file:///Volumes/Data-1, NSFilePath=/Volumes/Data-1}
Failed to get UUID for destination: /Volumes/Data-1
[SnapshotUtilities volumeRefForPath:] FSPathMakeRef failed and returned OSStatus: -43 for path /Volumes/Data-1
Backup failed because the network destination disk was ejected or disconnected unexpectedly!
Backup failed with error 26: The connection to the server was interrupted. -
I have set up Time Capsule to use with Time Machine but when I open Time Machine it 'cannot find' the Time Capsule and I have to 'Select the Disk' each time. In the Next Backup tab it always says "When disk is connected" even though the disk is already connected.
Your pro doesn't matter.. I presume it is happily working.
Your imac setup has got messed up because you changed from a local (my book being USB type I presume) to network drive. Did you do a clean install of Lion?
Did you use the backup from the Pro on the imac? Otherwise I don't see how the Pro shows up in use previous disk. Where is Pondini when you need him??
You cannot download Time Machine as an App and replace the current version. It is built into the OS.. the only way to do it is a clean install. Unfortunately that might be the only way around the issue.
There is a number of issues that Pondini has covered in the setup issues of troubleshooting.
This is the most relevant I think. http://pondini.org/TM/B6.html
But look at the whole section B setup problems.
http://pondini.org/TM/Troubleshooting.html
If it was me, I would store all the info you need.. not using TM but using a straight copy of files.
Then clean install Lion. I doubt any of these issues would exist if you had not installed Lion over existing setup or used a different backup.
See if you can get Pondini to respond.. !!
Maybe you are looking for
-
Ad Hoc Query testing when upgrading to ECC 6.0
Hi, We have a decentralized SAP HR system. Instead of developing custom ABAP reports, we have given permission to superusers to create their own reports using Ad Hoc Query. This has lead to large number of Ad Hoc Queries (>2000). Techincally speakin
-
Installer thinks volume is case sensitve
I have two volumes on my mac. The system volume is case sensitive. I have a separate non-case sensitive volume from which I run CS4. I read the prerequisites before I purchased Illustrator and Photoshop CS5: "2GB of available hard-disk space for i
-
Quantity field to string with units ?
Hello All, i'm moving quantity field to a string . But I want to move with reference unit also. DATA: lv_del_qty TYPE string. CLEAR lv_del_qty. lv_del_qty = itab->del_quantity. I want the unit referece also. How to do this ?
-
Can the node's UID be different when re-joining the cluster?
Let's say that we have a split brain scenario and when both islands meet again one of them is "marked as invalid" and is restarted. Upon cluster restart will the restarted nodes get new UID values? Thanks, -- Gato
-
How to write the SQL for the following
ID PRODUCT LEAD_FLAG SALES_VOLUME 1 A Y 100 1 B N 200 1 C N 300 1 D N 400 2 A N 10 2 B Y 20 2 C N 30 2 D N 40 I need to calculate the incentiv