HT3728 What is the follow error code????

I have a new Time capsule that has been working ok for the last coouple of months, no problem.  I'm now getting the following message when it tries to backup.
The backup disk image “/Volumes/Data/Malcolm's Computer.sparsebundle” could not be accessed (error -1).
What does it mean and how do I stop it from happening again??

As you have been told in the other threads this is
SQL Developer (Not for general SQL/PLSQL questions)
Copy and Paste of text (even sourcecode) works for most users, so can you specify what
> because this wbesite doesn't work
means?

Similar Messages

  • Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235

    Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235
    Fans are running permanantly and this is the error I get when running apple hardware test.

    SNS is a sensor error. The sensors read actual temperatures at several points inside the Mac chassis to decide when things are heating up, and which fan or fans speed up to improve cooling.
    Some of those sensrs are just a thermal-sensitive transistor mounted to a surface that conducts heat, and replacement does not run into big money. Disconnected wires are sometimes a possibility, especially if things were changed nearby, e.g., new heatsink.

  • Hi can someone explain what the following error code mean and how i can recifty to download a copy of ebook purchase Error getting License. License Server Communication Problem: E_ACT_NOT_READY

    Hi can any one help
    I keep getting the following error code when I try and down a ebook which I have purchase
    Error getting License. License Server Communication Problem:
    E_ACT_NOT_READY
    can someone advise me what this means and how I recifty the problem to enable me to read the ebook purchase?
    Thanks

    I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
    I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
    Error getting License. License Server Communication Problem only mine says  Bad Device key after.
    Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
    i hope someone answers this soon.

  • I have recently restored everything on my iMac after getting a new hard drive. When i try to use Elements, i get the following error code   ERROR  150:30. Any ideas?

    I have recently restored everything on my iMac after getting a new hard drive. When i try to use Elements, i get the following error code   ERROR  150:30. Any ideas?

    Did you use migration assistant to copy over programs, documents, and settings? You can't do that with PSE. Elements is not a tidy package in accordance with the apple developer guidelines. The installer strews stuff all of your hard drive in place the migration assistant isn't programmed to look and you can never hope to find all h the bits. You must always install PSE from scratch on a new machine. By attempting to copy it you have made a lot of trouble for yourself.
    You will need to download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    and then you can go around and manually remove what you can reach. Look in applications, your hard drive>library>application support>adobe, your username>library>preferences. In the user library also delete any saved application states for PSE.
    Then you can reinstall from scratch.

  • Hi, I keep getting the following error code : U43M1D207 when I try to install the latest updates.

    Hi, I keep getting the following error code : U43M1D207 when I try to install the latest updates. Im trying to load the RAW conveyors for the Nikon D810 but so far pretty well frustrated.
    Any help would be greatly received.......
    Regards
    Apple

    Can you please try the solution suggested at error code U43M1D207 ?
    Thanks
    Andaleeb

  • I keep getting the following error code message:  We could not complete your itunes store request. An unknown error occurred (-9808).  Help!

    I keep getting the following error code message:  We could not complete your itunes store request. An unknown error occurred (-9808).  Help!

    Try:
    iTunes Store: "An unknown error occured (-9808)"

  • Zenwsreg returned the following error code: 404

    L.S.
    I'm having problems importing workstations. I've already configured a
    number of networks, and only on this one I'm having problems.
    The problem in short:
    Workstations don't get imported. On the prompt I get:
    Zenwsreg returned the following error code: 404
    The problem more elaborate:
    The network:
    Netware 6.0 SP5
    Zfd 4.01 SP6
    Workstation
    XP
    Tree:
    I would like to import workstations is a separate container.
    I made a server policy package, in Policies, Netware I defined a
    workstation import policy, In this policy I put containers and in
    platform, and in platform general I put allow importing, selected
    container, one of the containers I defined earlier.
    Still I get:
    Error on the XP-DOS prompt:
    Zenwsreg returned the following error code: 404
    Then I put logging on. I got this error line:
    Error line in
    Leaving HTTPUtil::SendMessage, returning 404
    Any help?
    Thanks
    (There is no one at [email protected])
    Complete zenwsreg.log:
    Friday, December 02, 2005 10:29:25 -- -- Entering ZENWSREGRegister
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    ZenLiteTree::ZenLiteTree()
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    ZenLiteTree::ZenLiteTree()
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    ZenLiteTree::InitZENContextIfNeeded
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- About to call
    ZENContextInit(ptr, REMADM)
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    ZENContextInit
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Returned from
    ZENContextInit(<REMADM><2><switact.rsg1><0>, REMADM, 1)
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Leaving
    ZenLiteTree::InitZENContextIfNeeded, returning 1
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    ZenLiteTree::ZenLiteTree(zenContext)
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Leaving
    ZenLiteTree::ZenLiteTree(zenContext)
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    NDSTree::WhoAmI()
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- WhoAmI()
    returning switact.rsg1.
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Leaving
    NDSTree::WhoAmI()
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    NDSTree::GetTreeName()
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister --
    NDSTree::GetTreeName() returning REMADM.
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    NDSTree::GetTreeName()
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    Registrar::Register
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Created
    Mutex.
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Got Mutex.
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    Registrar::Update
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Leaving
    Registrar::Update, returning 1
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    Registrar::Import
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    GenerateImportDoc
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- User Tree =
    <REMADM>
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- User DN =
    <switact.rsg1>
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Login count =
    <1>
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    ZenLiteTree::ZenLiteTree()
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    ZenLiteTree::ZenLiteTree()
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- ConnType = 2
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Encountered
    Winsock error 4294967295 when trying to scan the IPX address.
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    ZenLiteTree::ZenLiteTree()
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    ZenLiteTree::ZenLiteTree()
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- ConnType = 2
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Leaving
    GenerateImportDoc
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Entering
    HTTPUtil::SendMessage
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- HTTP server =
    zenwsimport
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Loaded
    wininet.dll
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- About to
    create an HTTP connection.
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Connecting to
    server <zenwsimport> port 8039.
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- hConnect =
    13369352
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- hRequest =
    13369356
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- Finished
    opening request. hRequest = cc000c.
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- About to send
    the following request:
    Friday, December 02, 2005 10:29:25 -- ZENWSREGRegister -- <?xml
    version="1.0" encoding="UTF-16LE"?>
    <new_ws>
    <computer>DAVINCI-A750EDC</computer>
    <cpu>PENTIUM 4</cpu>
    <dns>davinci-a750edc.adm.noa.davinci.local</dns>
    <subnet_mask>255.255.255.0</subnet_mask>
    <ip>192.168.30.41</ip>
    <ipx></ipx>
    <mac>00:13:20:83:25:66</mac>
    <os>WINXP (5.1 Service Pack 2)</os>
    <server>FS_NOA_ADM1</server>
    <user_tree>REMADM</user_tree>
    <user_dn>switact.rsg1</user_dn>
    <login_count>1</login_count>
    <auditing_version>4.0.1.53</auditing_version>
    </new_ws>
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- Last error =
    12029
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- Error: Kan
    geen verbinding maken met de server
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- Leaving
    HTTPUtil::SendMessage, returning 12029
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- Entering
    HTTPUtil::SendMessage
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- HTTP server =
    zfd_mts
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- Loaded
    novinet.dll
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- About to
    create an HTTP connection.
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister --
    InternetSetOption returned 1
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- Connecting to
    server <zfd_mts> port 80.
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- hConnect =
    33619969
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- hRequest =
    50397185
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- Finished
    opening request. hRequest = 3010001.
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- About to send
    the following request:
    Friday, December 02, 2005 10:29:26 -- ZENWSREGRegister -- <?xml
    version="1.0" encoding="UTF-16LE"?>
    <new_ws>
    <computer>DAVINCI-A750EDC</computer>
    <cpu>PENTIUM 4</cpu>
    <dns>davinci-a750edc.adm.noa.davinci.local</dns>
    <subnet_mask>255.255.255.0</subnet_mask>
    <ip>192.168.30.41</ip>
    <ipx></ipx>
    <mac>00:13:20:83:25:66</mac>
    <os>WINXP (5.1 Service Pack 2)</os>
    <server>FS_NOA_ADM1</server>
    <user_tree>REMADM</user_tree>
    <user_dn>switact.rsg1</user_dn>
    <login_count>1</login_count>
    <auditing_version>4.0.1.53</auditing_version>
    </new_ws>
    Friday, December 02, 2005 10:29:27 -- ZENWSREGRegister -- Finished
    sending request. Result = 1
    Friday, December 02, 2005 10:29:27 -- ZENWSREGRegister -- Leaving
    HTTPUtil::SendMessage, returning 404
    Friday, December 02, 2005 10:29:27 -- ZENWSREGRegister -- Entering
    Registrar::Import
    Friday, December 02, 2005 10:29:27 -- ZENWSREGRegister -- Import
    failed. Error: 404
    Friday, December 02, 2005 10:29:27 -- ZENWSREGRegister -- Released
    Mutex.
    Friday, December 02, 2005 10:29:27 -- ZENWSREGRegister -- Leaving
    Registrar::Register, returning 404
    Friday, December 02, 2005 10:29:27 -- ZENWSREGRegister -- Leaving
    ZENWSREGRegister, returning 404

    L.S.
    Thanks. Problem solved. For who wants to know, read on
    > ok... the zenwsimport dns is not resolved..
    Aargh! This is "by design" in my workstation deployment strategie .....
    but only up to some point. I was forced to troubleshoot a not very well
    deployed image (when will people read my instructions).
    The workstation at this state had a line in the hosts file to prevent
    registring the workstation. This should be deleted in the final state
    of the workstation but hadn't.
    >
    > that's why he is going for the middletier server..
    >
    > from where the 404 is comming from..
    >
    Well, i'll read that one as soon as I need this.
    > troubleshooting Middle Tier authentication
    > http://support.novell.com/cgi-bin/se...?/10073537.htm
    > --
    >
    Thomas Roes
    there is no one at [email protected]
    www dot switact dot nl (not yet a very mature site)

  • What does the "Copy error code files" option do in the build spec properties

    I have the "Copy error code files" checked for my application build specification but when I run my EXE on a different computer and call the simple error handler, I don't get the custom error from my computer's
    C:\Program Files(x86)\National Instruments\LabVIEW 2012\user.lib\errors\User-errors.txt file. Instead I get the "this error code is undefined" explaination.
    I've also tried including that file in the "always included" section of the build spec but that didn't work either. Am I missing something?
    CLD (2014)

    Infinite,
    Check out this link:
    http://www.ni.com/white-paper/3209/en
    Specifically this paragraph:
    "When building an executable (EXE) or shared library (DLL) with the Application Builder, make sure to add the custom error file as a support file (under the Source Files tab). For an executable, the custom error file will be saved in the <executable destination directory>\user.lib\errors directory. For a shared library, the custom error file will be saved in the National Instruments\Shared\LabVIEW Run-Time\<version>\Errors directory. When distributing a shared library, make sure to install the custom error file in this directory."
    James K.
    National Instruments
    Applications Engineer

  • Zenwsreg returned the following error code: 2

    I have imaged a lab from a workstation that is registered, but I cannot
    register any of the imaged lab workstations because of the above error
    code. I cannot locate the error code on the internet or Novell's support
    site. Any ideas on how to remove the error on the imaged computers?

    On Tue, 22 Mar 2005 18:20:29 GMT, [email protected] wrote:
    > Any ideas on how to remove the error on the imaged computers?
    HKLM/Software/Novell/zenworks/zenwsreg/Loglevel = 2 (String Value) which
    will create a log file in c:\program files\novell\zenworks
    Marcus Breiden
    Please change -- to - to mail me.
    The content of this mail is my private and personal opinion.
    http://www.edu-magic.net

  • Hello..Does anyone in this community know what the following error code indicates   0x8002006E   I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player.

    I was trying to burn a DVD from files in a burn folder. They were pictures from my Nikon camera. I can play videos and movies from the same dvd player.    Thanks for any help you can offer,

    Thanks for your reply:
    I did find an error log related to the error code and tried all suggestions on the list of recommendations, still no luck            
    I definitely am running OS X10.5.8 (hopefully will be updating later on this month)
    I tried several brand new discs from the same box, still no luck.
    My last option is to go out and try a different brand, guess I'll go with Verbatim this time but I think I'll poke around some more before buying 20 more new discs.

  • ZWSReg returned the following error code: 2

    We've been forced to start using the zen4 because the 3.2 version
    suddenly
    stopped working, but when we start zwsreg.exe it exits with error code
    2 and
    doesnt create anything.
    The only way i can get it to make a new workstation is by using
    the -zenimportserver none and either specifying a custom new object or
    by
    specifying the policy, which messes up also by not naming the
    workstation
    propperly.
    We've got it set up with Username-OS-Mac in the users container, when
    i
    specify the policy it generates the object with UsernameMac, it does
    however
    put it in the user container.
    I also tried getting some logfiles in the workstations but its not
    generating any, even after adding those registry keys mentioned in
    TID10068910.
    Shouldnt it just grab all its settings from the nds like wsreg32
    withouth
    having to specify any command line parameters ?
    This is with the zen4 agent from zfdpatch3.
    Arjan

    The message appears when i try to start zwsreg. I did some messing
    around
    and pperantly this reg problem only appears on windows XP...
    I managed to get the following on a win2k station.
    Wednesday, April 23, 2003 15:43:25 -- -- Entering ZENWSREGUnreg
    Wednesday, April 23, 2003 15:43:27 -- -- Entering ZENWSREGRegister
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Entering
    ZenLiteTree::ZenLiteTree()
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Entering
    ZenLiteTree::ZenLiteTree()
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Entering
    ZenLiteTree::InitZENContextIfNeeded
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Entering
    LoadZenLite
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Leaving
    LoadZenLite, returning 1
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- About to
    call
    pZENContextInit(ptr, GEMDAN)
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Returned
    from
    pZENContextInit(<GEMDAN><ffff><><0>, GEMDAN, 1)
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Leaving
    ZenLiteTree::InitZENContextIfNeeded, returning 0
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Entering
    ZenLiteTree::ZenLiteTree(zenContext)
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Leaving
    ZenLiteTree::ZenLiteTree(zenContext)
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Entering
    NDSTree::WhoAmI()
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- WhoAmI()
    returning
    AMelein.
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Leaving
    NDSTree::WhoAmI()
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Entering
    NDSTree::GetTreeName()
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister --
    NDSTree::GetTreeName() returning GEMDAN.
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Entering
    NDSTree::GetTreeName()
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Entering
    Registrar::Register
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Entering
    Registrar::Update
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Leaving
    Registrar::Update, returning 1
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Entering
    Registrar::Import
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Entering
    GenerateImportDoc
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- User Tree =<GEMDAN>
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- User DN =
    <AMelein.>
    Wednesday, April 23, 2003 15:43:27 -- ZENWSREGRegister -- Login count
    = <1>
    Wednesday, April 23, 2003 15:43:28 -- ZENWSREGRegister -- Entering
    ZenLiteTree::ZenLiteTree()
    Wednesday, April 23, 2003 15:43:28 -- ZENWSREGRegister -- Entering
    ZenLiteTree::ZenLiteTree()
    Wednesday, April 23, 2003 15:43:28 -- ZENWSREGRegister -- ConnType = 2
    Wednesday, April 23, 2003 15:43:28 -- ZENWSREGRegister -- Leaving
    GenerateImportDoc
    Wednesday, April 23, 2003 15:43:28 -- ZENWSREGRegister -- Entering
    HTTPUtil::SendMessage
    Wednesday, April 23, 2003 15:43:28 -- ZENWSREGRegister -- HTTP server
    =
    zenwsimport
    Wednesday, April 23, 2003 15:43:28 -- ZENWSREGRegister -- Loaded
    wininet.dll
    Wednesday, April 23, 2003 15:43:28 -- ZENWSREGRegister -- About to
    create an
    HTTP connection.
    Wednesday, April 23, 2003 15:43:28 -- ZENWSREGRegister -- Connecting
    to
    server <zenwsimport> port 8039.
    Wednesday, April 23, 2003 15:43:28 -- ZENWSREGRegister -- hConnect =
    13369352
    Wednesday, April 23, 2003 15:43:29 -- ZENWSREGRegister -- hRequest =
    13369356
    Wednesday, April 23, 2003 15:43:29 -- ZENWSREGRegister -- Finished
    opening
    request. hRequest = cc000c.
    Wednesday, April 23, 2003 15:43:29 -- ZENWSREGRegister -- About to
    send the
    following request:
    Wednesday, April 23, 2003 15:43:29 -- ZENWSREGRegister -- <?xml
    version="1.0" encoding="UTF-16LE"?>
    <new_ws>
    <computer>AMelein</computer>
    <cpu>PENTIUM 4</cpu>
    <dns>AMelein</dns>
    <subnet_mask>255.255.254.0</subnet_mask>
    <ip>10.254.160.3</ip>
    <ipx>00000002:00080217</ipx>
    <mac>00:08:02:17:37:F6</mac>
    <os>WIN2000 (5.0 Service Pack 3)</os>
    <server>SERVER2</server>
    <user_tree>GEMDAN</user_tree>
    <user_dn>AMelein.</user_dn>
    <login_count>1</login_count>
    <auditing_version>4.0.1.4</auditing_version>
    </new_ws>
    Wednesday, April 23, 2003 15:43:30 -- ZENWSREGRegister -- Last error =
    12029
    Wednesday, April 23, 2003 15:43:30 -- ZENWSREGRegister -- Error: Kan
    geen
    verbinding maken met de server
    Wednesday, April 23, 2003 15:43:30 -- ZENWSREGRegister -- Leaving
    HTTPUtil::SendMessage, returning 12029
    Wednesday, April 23, 2003 15:43:30 -- ZENWSREGRegister -- Entering
    HTTPUtil::SendMessage
    Wednesday, April 23, 2003 15:43:30 -- ZENWSREGRegister -- Aborting
    SendMessage. Server address is empty.
    Wednesday, April 23, 2003 15:43:30 -- ZENWSREGRegister -- Entering
    Registrar::Import
    Wednesday, April 23, 2003 15:43:30 -- ZENWSREGRegister -- Import
    failed.
    Error: 2
    Wednesday, April 23, 2003 15:43:30 -- ZENWSREGRegister -- Leaving
    Registrar::Register, returning 2
    Wednesday, April 23, 2003 15:43:30 -- ZENWSREGRegister -- Leaving
    ZENWSREGRegister, returning 2
    Arjan
    "Shaun Pond" <[email protected]> schreef in bericht
    news:[email protected]...
    > Arjan,
    >
    > so, let me understand this - if you enable logging, you get a
    message
    > saying you don't have rights to the registry? At what point does
    this
    > message appear?
    >
    > --
    >
    > Shaun Pond
    > Novell Support Connection SysOp
    >

  • Why is it that the 2nd-13th episodes of "Justified" (Season 3) downloaded without a problem, but the 1st episode triggers the following error code: err= -50

    See above.

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • I keep receiving the following error code: 1025 Duplicate Folder Name [Gmail]/Drafts/√ Orders/Books/Books/eBooks (Failure)

    Duplicate folder name [Gmail]/Drafts/√ Orders/Books/Books/eBooks (Failure)
    (/[Gmail]/Drafts/&Iho- Orders/Books/eBooks/)

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Need a solution for the following error code on AIR-AP1231G-A-K9

    Dec 1 10:05:46.243: %DOT11-7-AUTH_FAILED: Station 0018.de89.d720 Authentication failed

    Hi
    Here you are the explanation:
    The specified station has failed authentication.
    The most common reasons are the user has entered the wrong password or the radius server maybe unavailable.
    Hope this helps

  • I receive the following error: (Error code: ssl_error_renegotiation_not_allowed) which worked fine with previous version of firefox and current safari

    Trying to get to secure website (Login site for IRB at Ochsner). Worked fine with previous version of Firefox and continues to work with safari. I receive the following error code:
    (Error code: ssl_error_renegotiation_not_allowed)
    Any Thoughts?
    Thanks,
    M White New Orleans

    Here's one solution from last year: http://dotomaz.tumblr.com/post/786443743/firefox-4-0b1-and-ssl-renegotiation

Maybe you are looking for

  • Cache and/or Connection problems under load

    I have a Kodo web app that's been running just fine in production for many months now. However, recently the web traffic has shot up by a huge amount, literally overnight. But unfortunately, it's caused the app to fail very ungracefully under the str

  • Problem displaying PDF in Firefox 4 browser

    Since installing Firefox, I cannot download a PDF file larger than 5MB and get it to display in the browser. A file of 4.9MB works OK. If I disable the Adobe Reader plug-in, I can download the larger file and it will display in Adobe. Same issue with

  • PDFs have strange, blurry streaks

    When I try to save a pages document as a pdf (from the print menu--> save as pdf) they end up looking really, really strange. On my computer, everthing looks fine, but when I send them to a friend or open them on a pc to print, the text is warped and

  • HT201412 I have an iPad mini that won't even go into Recovery Mode

    iPad mini won't power on.  (It belongs to a young lady in my Bible study group so I don't know what OS it has installed.)  I've tried all of the advised restore & recovery tips.  It will not boot into Recovery Mode at all.  I've held down the Sleep/W

  • Getting Multiple Recordsets using A Single Connection using jdbc-odbc

    I have a java application which uses sql 7.0 database server. I want to have multiple recordsets created using a single connection using jdbc-odbc bridge. Kindly let me know the procedure.