HT3737 I need to find out why Izoom in on a page when using my mouse and how do I zoom out?Any help?

Were can I find the info on what cause my mouse to zoom in on a page when viewing Safari. How do I zoom out?

Also check, System Preferences > Accessibility > Zoom > uncheck enable access...

Similar Messages

Hello , I need to find the serial number of my programs . Would anyone know where and how to do it? The programs are installed on PC Thank you

Hello , I need to find the serial number of my programs .
Would anyone know where and how to do it?
The programs are installed on PC
Thank you

Find your serial number quickly

Why does Safari refresh the page when using the back button?

Safari didn't use to do this.
Even on these forums, when you hit the back button to go back exactly where you were at, if there are new posts, the entire page may have changed. I knew exactly the next post I wanted to look at before the page was refreshed. Now, I can't even find the post I wanted to read unless I scroll through the entire list again.
I need to be able to go back to the page I was just on and not have it refresh.
I need to go back exactly where I was.
Safari can't even go back properly as it wants to go back near the top of the last page I was on.
I need it to go back exactly where I was at.
I have no idea what the engineers are thinking about this one.
FireFox works properly when going back to the prior page.
I have long lists on pages I work with.
For example:
1. through 1,000.
If I am on reference number 500 on the previous page, when I hit back, it goes all the way back up to around 20 in the list.
I have to then scroll manually page down to 500 where I was at.
This is tedious, cumbersome and unnessesary.
Safari was much better before it was updated to this horrible behavior.
I don't know of any preferences you can change to change this odd behavior.
Anyone know of anyway to stop this horrible behavior in Safari?
This is like reading a book, but when you go back a page, the entire page may have changed and I have no idea where I was at.
Pretty $iss poor in my opinion.

Yes, that is correct.
However, you can also use the mouse or trackpad to swipe back a page and it still refreshes the last page.
Safari never did this back in Snow Leopard and maybe some versions of Safari in Lion.
However, Safari in Mountain Lion always does this.
It is very cumbersome using the "open link in new window" or "open link in new tab".
It was much better just being able to click the back button or swiping to get back exactly where you were on the prior page.
Hopefully more people will send Apple feedback on this.
Thanks for sharing.

Why does Firefox keep opening a separate Firefox tab along with my home page when I start it, and how do I stop it.

When I click on the Firefox icon, it opens my home page, but in a separate tab it opens a Firefox page. I only want my home page to open when I click the icon.

Firefox can store multiple home pages, make sure the other sites are not listed as home pages - https://support.mozilla.com/kb/How+to+set+the+home+page

Why does Firefox Support Home Page open automatically as my second tab, to right of home page, when I start Firefox, and how do I stop this?

I have newly installed Firefox 4 on my computer as part of re-installing my OS. Firefox now opens with 2 tabs: my specified home tab and, to its right, a Firefox Support Home Page tab. I suppose I did something to cause this, but how can I undo it?

Reset your homepage and make sure that only one tab is open when you set your homepage.
http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically. Can some one out there help me?

I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically.

Update automatically under which circumstances, exactly?

Need to find out how to lock a point in a path that will not allow the rest of the path to rotate or move around it

Hello,
I am having some trouble with using shape layers and paths to create a solid, flat 'hair' effect in a cartoon animation.
I have used a semicircle shape layer as the hair on the head itself and then a path with a stroke of the same width as the semi circle to be the long part of the hair.
Unfortunately when I move/rotate the bottom point in the path it causes gaps to appear further up where the stroke is rotating around the point at which the stroke is supposed to "connect" to the semi circle.
I have included a couple of screenshots of me rotating the hair opposite ways so you can see.
- imgur: the simple image sharer
- imgur: the simple image sharer
I need to find out if there is a way to lock the top point in place where it joins the semi circle blond hair which will stop this part from moving at all, even rotating around the point.
But the bottom needs to move freely and obviously the part between the two points will move fairly naturally.
If you can imagine how a girl with long hair has her hair attached to her head, it does not move at all, but the bottom moves freely. It needs to be like this.
If you can provide any assistance it would be greatly appreciated.
Thanks!

That is perfect thank you so much!
Can't believe I didn't think of that but you da real MVP!

TS1646 We have several apple devices in our family who use my debit card for itune charges. I need to find out which device (itune account) these charges are coming from. Can you help?

We have several apple devices in our family who use my debit card for itune charges. I need to find out which device (itune account) these charges are coming from. Can you help?

You can't tell which device a purhcase was made on, but if your family members each have their own iTunes account to which your card is linked then you can check the purchase history on each of those accounts via the Store > View Account menu option on your computer's iTunes - that should have 'purchase history' section with a 'see all' link to the right of it

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues). And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

I need to find out the list of outbound made it to the vendor

I need to find out if the attached list of outbound made it to the vendor.
and i have list of all IDOC numbers that i need to check. Could you please assist? how to check?
Please do needful.
Thanks in advance.
Regards,
PIneeder.

Hi,
If you want to check it in XI/PI check first:
- in the abap stack transaction:
              - sxmb_moni and filter for your sending system and idoc type
                     or
              - idx5 fill in the date when the idoc was sent and the idoc number from the sending system and through double-clicking you will get to the same message as in sxmb_moni
- in the runtime workbench (only if the communication with the partner is done via a java based adapter (all except xi,http and idoc) go to the runtime workbench and then click on message monitoring and filter for your messages. If the status there is succesfull then you can safely assume that the message was delivered to the partner. Note: it sometimes happens that a PI server also has one or more decentral adapter engines. In this case you need to check if your communication channel is deployed on any of them (you can check that in the Integration Builder) and then select the corresponding one in the Runtime workbench -> Message Monitoring -> Message from Component.
Hope this helps,
Horia

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send scree

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?

If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
Download a free trial or buy Adobe products | Adobe downloads

My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

The cost is $149 for all the phones except the iphone 4S that one is $199. Apple does not cover any acidental damage

Need help with getting images to look smooth (without the bitmap squares) around the edges. When I transfer the image from pictures, it sets itself into the InDesign layout, but with square edges. I need to find out how to get it to look smooth?

Need to find out how to get my images transferred into an InDesign layout without the rough edges, as with a bit map image, but to appear with smooth edges in the layout. I can notice it more when I enlarge the file (pic). How can I get it to appear smooth in the finished layout. Another thing too that I noticed; it seems to have effected the other photos in the layout. They seem to be
pixelated too after I import the illustration (hand drawn artwork...)? Any assistance with this issue will be greatly appreciated. Thanks in advance.

No Clipboard, no copy & paste, as you would not get the full information of the image.
When you paste you can't get the image info from the Links panel, but you can get resolution and color info either via the Preflight panel or by exporting to PDF and checking the image in Acrobat.
Here I've pasted a 300ppi image, scaled it, and made a Preflight rule that catches any image under 1200ppi. The panel gives me the effective resolution of the pasted image as 556ppi. There are other workflow reasons not to paste—you loose the ability to easily edit the original and large file sizes—but pasting wouldn't cause a loss in effective resolution or change in color mode.

Need to find out how many users are using Siebel Application

Hello all,
I need to find out how many users are using Siebel Application?
Is there a way I can find out?
Thanks.
yasun

Hi,
Read the following:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor30.html
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor17.html
For full information about server status and statistics red:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor.html
T.Abed

Need to find out how much % of query completed from OEM

Need to find out how long will a query take to run or when I am running the query where can I check to see that X% of my query is complete.
Is that % shown on OEM --> Performance --> Top Activitity?

Under OEM/GC of release 10g you won't be able to see how long the query will take neither how much % of a query are already finished.
I know that this functionality was given in the old release of the OEM (javas based GUI with ll the databases on the left side). I'm missing
that old functionality, too...

HT3737 I need to find out why Izoom in on a page when using my mouse and how do I zoom out?Any help?

Similar Messages

Maybe you are looking for