HT3771 How do I get my computer to recognize my printer and print both Windows7 and Safari?

I added Parallel software to my MacBook Pro 10.6.8.It was printing fine then asked me to connect usb.  I was just choosing esc.  I think I chose connect Windows.  Now won't print some things.  How do I get it to print all things on both sides?  Thanks for your time

You need to connect your printer to your WiFi router wirelessly - maybe by using the printer's front panel (if it has one) or maybe by using a Windows (usually) PC connected to the printer with a USB cable.
Once that's done, you can disconnect the USB cable, and print wirelessly.  From your description, I'm not sure you've done this required first step.

Similar Messages

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • My ipods are no longer recognized after I installed my Iphone I have 2 ipods that I have music on and still want to use them so how do I get the computer to recognize the ipods again?

    I recently got an Iphone and after I installed it on my computer my 2 ipods are no longer able to sync to the computer how do I get the computer to recognize the 2 different ipods so I can still use them?

    Since you already had two iPod before getting the iPhone, what exactly did you need to "install" to use the iPhone?  Doesn't it use to the same iTunes installation you already used with the iPods?
    So, I guess my question is, what changed on the computer when you started using the iPhone?
    What happens now when you connect the iPod?  Is the iPod still seen in Windows device manager?

  • How do i get my computer to recognize my computer

    how do i get my computer to recognize my computer

    Hi, edwin5095. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the issue persists, try all remaining steps in the article below. 
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Cheers,
    Jason H.

  • How do I get my computer to recognize my iPod touch? I have tried all the steps already.

    How do I get my computer to recognize my iPod touch? I have tried all the support steps online already.

    Did you do everthing here including removing and reinstalling all the the Apple software using the instruction within?
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    Then try another computer to help determine if the problem is a compter or iPod problem.

  • How do I get my computer to recognize my external hard drive

    How do I get my computer to recognize my external hard drive?

    Turning the power on definitely helps!

  • I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    iPod not recognized in 'My Computer' and in iTunes for Windows

  • HT201269 when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resett

    when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?

    What version of iTunes are you running on your computer? You need to update to the current version.

  • How do I get my computer to recognize my shuffle

    I am having a hard time getting my computer to recognize my shuffle--can anyone help me

    Have you carefully worked through each and every suggestion in this Apple support document yet?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • How can I get my computer to recognize the canon eos digital rebel

    I have not used this camera for more than 2 years.  I now have a laptop with windows 7.  This computer will not recognize this camera when I plug it in to usb to download pictures.  I have tried everything except what is going to work.

    Do you happen to have the original discs?  Or, was EOS utility previously installed on that computer?  If not, you need to do a bit of shinanigans to get around Canon's protection (which I still don't understand, either you own a Canon, or the software is no use to you).  It's not hard, but you have to rewrite a registry file to make the software think it was previously loaded on your computer.
    Go here (providing you're in the US) to download EOS utility:
    http://www.usa.canon.com/cusa/support/consumer
    It's an "updater".  So again, you need to have had a previous version on your computer or it won't install.   Once it installs all you do is plug in your camera and turn it on and a window pops up offering a couple different options like File Transfer or Tethered Shooting.

  • HT1386 How do I get my computer to recognize my I-touch?

    When I connect my I-touch with the cord it came with to my computers usb port, my computer shows my I-touch as an internal storage device. I-tunes is also not recognizing my I-touch. Does anyone know how to fix this???

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • How can I get my computer to recognize my i-pod?

    I have been syncing the i-pod to my computer with no problems until the past week.  Now my computer does not recognize it.  I use Windows 7 and own an I-pod touch version 4.3.5   I am unable to transfer anything from my computer back to the i-pod.  It is very frustrating

    maybe this can help you
    http://support.apple.com/kb/TS1363

  • How do i get my computer to recognize my iphone and download itunes?

    When i plug my iphone up to my laptop it recognizes it but never pulls up itunes and when i take it to the other computer that has itunes already on it that itunes does not recognize it. what do i do?

    If your phone is not appearing in iTunes see either http://support.apple.com/kb/TS1538 (windows) or http://support.apple.com/kb/TS1591 (mac) for troubleshooting steps.

  • How do I get my computer to recognize multiple ze

    My computer has the vista operating system - and it was with great difficulty that we were able to get either of the zen's to work. Now we don't have any of the software that originally came with the zens because there was something on the XP driver CD that vista did not like. I have a 'zen v' and my daughter has a 'zen v plus'. I installed mine first, and vista recognizes it and put the zen icon next to it. My daughter's has a generic icon. When I open windows media player to sync, it lists my zen, but not my daughters. When I tell it to refresh the devices, it doesn't even see that the zen v plus is plugged in. In order to put music onto my daughter's zen, I have to put it onto mine, then copy it onto hers. My younger daughter has a Sansa Shaker MP3 player and it works just fine (like mine).

    - Start here.  It is normal and expecedt for the computer open the an image program wehn an iPod is conncted since that is how one syncs saved photo from the iPod to the computer.
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - You can try disabling the camera program from opening and see if that helps:
    http://support.apple.com/kb/TS1500
    - Have you installed a camera or scanner program or simlar recently and is that when the current problem started?  If so uninstall that program.

  • How can I get the computer to recognize my email and password? I have an exchange on my printer.

    HP D110 series.  Windows 7 -64-bit.  My printer was exchanged for the same model and I can not get connectivity to the computer.
    My email and password are not accepted.  What do I do to connect?
    {Personal Information Removed}

    hi Darryn
    Hope you are doing well and sorry to learn that you are having this issue.
    Taking into consideration the security of your data and your own, every time that email is reset is locked for 6 months.
    I see how that can an inconvinience in your situation but remember the purpose of that in my modest opinion is to protect data that is send to you and you to that email to print, A good example.
    You changed the email a week ago told your relatives and they forgot and they sent  information confidetial or private information met to you but I choose the email you had last week and I get a hold of this information.
    This is why I think HP make the decision of Automaticly locking the old email as soon is changed.
    What you can do to keep it as close as you can you from the one that you had previously is to add a number or another lettter to the old one and communicate the changes to your allowed senders.
    Hope this gives you a good explanation and an alternative;
    RobertoR
    ▼ 
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Maybe you are looking for

  • Converting Object Arrat to double array

    public double average(Object ... object)           double avg=0;           int count=1;           for (double d: object)                count++;                 avg +=d;           return (avg/count);      }I wanted this code to get compiled with out

  • Ibase Data Download from CRM 5.0

    Hello Gurus, I want download the following data from CRM 5.0 in a text file ( tab delimited ) :- IBASE_HEADER -- can be obtained from FM CRM_IBASE_GET_DETAIL IBASE_COMPONENT -- can be obtained from table IBIN IBASE_TEXT IBASE_PARTNER IBASE_ADDRESS IB

  • N8 - Headphones (awful design)

    I am delighted with my N8. However, I think the headphone design is awful.  I cannot imagine why on earth the designer has decided to have the lead from the controller to one earpiece shorter than the other.  All that happens is that you finish up wi

  • AWR & ADDR Report

    Hi , any one know how we cane read AWR report any basedline to comper ?? below some resuilts how can we now it's good or not . Finding 2: Commits and Rollbacks Impact is .02 active sessions, 10.04% of total activity. Waits on event "log file sync" wh

  • CRM Questionnaire Results Edit In-House Repair Fields

    I am new to CRM and I want to make the results of a questionnaire automatically edit the fields of an in-house repair on the WebGUI in SAP CRM 7.0.  After looking into this issue I think I have to work with the BADI CRM_MKTCA_SVY_PAI and the IMG path