HT3774 I have tried all of the above.

Hola:
I have checked all of the settings in this support thread listed for wake on demand and they are correct.
Apple TV 2.0 with current software, Airport Extreme with 7.6.1 and current firmware, iMac running Lion 27 inch, late 2009 (3.06 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3).
If I leave itunes open and my imc is asleep, operating the apple TV to computer dows NOT wake. I have to enter office, wiggle mouse and then can use Apple TV normally.
Help. All wake on demand settings check out.

Delete your old Firefox Profile and create new one
*http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
Backup and Restore your profile data's
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Profile_backup

Similar Messages

  • HT201412 I have tried all of the above and still can't get my ipad to respond

    I have tried all of the above and still can't get my ipad to respond

    Everything? Did you see the very last part about restoring the iPad and did you notice that there is another link in that step in case you cannot restore the iPad?
    Symptoms
    Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of the symptoms listed below.
    Resolution
    If any of these symptoms occurs, follow the steps in this article to resolve the issue. The device:
    Does not return to the Home screen after pressing the Home button
    Does not wake from sleep after pressing the Sleep/Wake button
    Does not turn on (or power on) when pressing any button
    Appears frozen or unresponsive
    Is unable to "Slide to Unlock" or "Slide to Power Off"
    If a single application is not responding or freezes when it opens, you can force it to close
    Press and hold the Sleep/Wake button until the red slider appears. When the red slider appears, release the Sleep/Wake button.
    Instead of dragging the red slider, press and hold the Home button for six seconds.
    If the device does not return to the Home screen, see the steps below to restart.
    If the device is unresponsive or certain controls aren't working as expected, try restarting
    To turn off the device, press and hold the Sleep/Wake button until the red slider appears.
    Slide your finger across the slider to turn off the device.
    To turn on the device, press and hold the Sleep/Wake button until the Apple logo appears.
    If the device remains unresponsive or does not turn on (or power on), try resetting
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
    If there is no video, verify that the device has enough charge to turn on
    If you are using an iPad, ensure that it's connected to the 10W USB Power Adapter.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Home button to attempt to wake the device.
    If the screen displays a red battery icon, let the device to continue to charge until it turns on.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane.
    If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    Additional Information
    Ensuring that your iOS device is kept updated to the latest software should minimize the occurrence of these issues.

  • TS1362 I have tried all of the above "fixes" and the cd that I just downloaded won't play properly. It says that the song is 3:33 long but only 1:40 of it plays before skipping to the next track

    How do I fix a cd that did not download correctly. I have tried all of the above fixes, but the songs either stop halfway through, or won't play at all.

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • I have tried all of the above solutions and I am still getting repeated crashes or messages interrupting anything I am trying to do

    At first the messages and crashes were only happening if I tried to play a game (Farmville) on Facebook. Then after a week I started getting the crashes and messages on Facebook. Now I get interrupted and crashes and messages on my Hotmail, Facebook and anything else I try to do. I have done all of the solutions on your site but none of them have stopped this. It did work a bit better when I downgraded the Flash to 10.3. But that only lasted a couple of hours and then I was right back to the way it is now. It makes it very frustrating to try to type an email, answer a friend, check my facebook and god forbid I try to play my game. I have actually gone two days in a row not even being able to get on to the game never mind play it. The message I keep getting is: Shockwave Flash might be busy or it may have stopped responding. You can stop the plug in now or you can see it the plug in will continue. If I don't click the wait button soon enough, then it crashes. If I click the wait button, I might get the same message over and over for almost ten minutes minutes before I can continue. Not only does it freeze the game, but it also freezes the computer. I can't get off, I can't go open another tab, if I have my emails open doesn't matter because everything freezes and I can't continue with anything until it stops. I am really sick and tired of this, its been going on for so long but it used to happen once maybe in half an hour, now what used to take me an hour to do on the computer can take upto 8 hours and thats only checking my game, email, etc., once. I used to be able to go on in the morning for an hour and then back on a night for an hour or so before bed. Not now. Please help, I don't know what else to do

    Delete your old Firefox Profile and create new one
    *http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    Backup and Restore your profile data's
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Profile_backup

  • HT204291 I seem to have tried all of the above, but still cannot find the airplay symbol on my Ipad 2. Any suggestions ?

    I cannot find the airplay symbol on my Ipad 2. I have tried all suggestions in te troubleshooting guide, but still no success. Please help.

    Have you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life.  By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
    iPod won't turn on
    B-rock

  • HT1320 i have tried all of the above to reset my 30gb ipod but its still not working, please help

    Hi, i have a ipod classic, it now wont turn on or do anything, i have charged it, toggled the HOLD button and tried all the suggested press and hold, but nothing. Ive tried conecting it to the computer via a USB cable again nothing, its not even showing on my Itunes account when thats turned on.
    Any one got any ideas, TIM

    Have you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life.  By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
    iPod won't turn on
    B-rock

  • HT203171 My curser pad is not working and the curser is going crazy.  I have tried all of the above but it still does not work

    My curser pad is not working and the curser is going crazy.  I have tried everything and it still does not work?

    I don't know what other solutions you've tried but on mine it was like a "Ghost in the Machine" (moving around and clicking on things on its own) and all I did to fix it was to lightly dampen a cotton ball with window cleaner (evaporates) and clean firmly around the inside edge of the pad and to also click it firmly quickly and many times to clean out ANY kind of dust or debris that has fallen into the cracks. worked GREAT for me , so far!!???

  • TS3694 My Ipod could not be restored error occured (3014) have tried all of the above?

    My itunes will not recognise my Idop Touch, I asks me to restore it when I do I get error message ipod could not be restored and unknown error occured (3014) have been on trouble shooting web site have done all they have said but no luck!

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • HT1414 i am unable to switch on the wifi on my iPhone 4s? I have tried all of the above ways.

    I am unable to switch on the wifi on my iPhone 4s.
    I have tried restart, restore, update etc.
    But its still not working.
    Please help

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • TS1398 I have tried all of the above and am still unable to connect to my home broadband, the pc is fine and so was the itouch up until yesterday, any help would be gratefully received.

    Yesterday my wifi would not work on my itouch, it has been fine since purchasing.  Today I have tried everything mentioned by supporters including restoring the itouch, but just get the message "unable to join the network". Anyone have any more tips?

    Are you positive you are entering in the correct password?  Have you tried rebooting the router by unplugging it from power for about 30 seconds or so?
    What happens if you head to Settings -> General -> Reset, tap Reset Network Settings, and then try to reconnect to your home Wi-Fi network.
    B-rock

  • TS1702 i have tried all of the above troubleshooting resolution to no avail. please help me with "MY HOURS" app

    hello all i have an issue with my hours app on my iphone4 when i touch to open it does not open, it flashes as if but then goes back to icon screen. whta the heck?

    Have you tried closing the app completely and seeing if it works when you re-open it ? From the home screen (i.e. not with the My Hours app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the My Hours app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • HT204368 Have tried all of the above regarding connecting a jabra easygo hands free ear piece and still unable to pair.

    Hi all, cant get jabra easygo to pair with ipone 4s, it pairs with ipad, ipod touch, blackberry etc etc any suggestions would be appreciated.

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • TS1538 I have tried all of the above and my iPhone 4s still will not sync, get recognised or do anything by both iTunes and my laptop. I need help!

    I have a white iPhone 4s and since a few days ago, I have not been able to access anything on my phone via my laptop. I have tired everything it says on the support pages but still nothing. My phone tells me it is charging but nothing pops up on iTunes or my laptop. I am seriously running out of methods to try.

    Delete your old Firefox Profile and create new one
    *http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    Backup and Restore your profile data's
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Profile_backup

  • Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

    inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

    Hi,
    I would try a Safe Boot first.  (This will take longer than a normal Boot and you will need to Restart afterwards).
    If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions.  (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
    With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs.  (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
    If a Safe Boot does not work I would also try a PRAM reset.
    Shut down the computer.
    Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
    This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
    Do you have an older version of iGlasses installed ?
    The one for Leopard does not work for Snow Leopard.
    Do you have  Web Browser open ?
    This may point to  Google Video Chat Plug-in and Flash Conflict.  It would be rare to allow another app to access the camera even if not displayiong a Pic. 
    (Chrome Installs the Plug-in as does the standalone download).
    Knowing  what "any application" exactly you are trying might help us pin it down.
    Any additional downloaded  apps that can use the camera ?
    Do you happen to have something balck in front of the camera ?
    8:20 PM      Sunday; October 9, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • When I try and launch Firefox, I get this error message A copy of Firefox is already open. Only one copy of Firefox can be open at a time." and have tried all of the trouble shooting tips, can you help?

    When I try and launch Firefox, I get this error message >A copy of Firefox is already open. Only one copy of Firefox can be open at a time." and have tried all of the trouble shooting tips, can you help? I thought if I were to completely uninstall and re install it might help, but I cannot seem to find instructions to do this....

    See [[Firefox is already running but is not responding]], the image shown in that article is the Windows equivalent of the error message that you are receiving, but the information relates to the Mac.

Maybe you are looking for

  • Satellite M70-340: I cannot see the DVD schort cut menu after reinstallation

    Hi, I just recently bought Toshiba M70-340 2 weeks ago. Now I learn that there is better Toshiba comparing the my one. My question is I cannot see on the screen the DVD schort cut menu. First time when I opened it it was on the rıght handside of scre

  • FAGLL03 ENTRY DATE

    HI, Entry Date Field in Report FAGLL03 Values not getting captured in Entry Date Field (CPUDT) CAN ANYONE HELP??? REGARDS SHAPPU

  • Spry ie7 transparency issue

    I'm using Spry HTMLPanel with the Fade effect. Everything works great in Firefox, but in ie7 the transparency on a png is messed up if the html section is displayed through HTMLPanel. If I look at the page directly it looks fine, and the problem only

  • Smartform printing all bold

    Hi everybody, My form is printing all bold regardless of what is defined in the style. Anyone has some hint? First I tought the problem was the font Arial (that I imported in SE73). But I changed all the paragraphs to Helvetica (HELVE) and the proble

  • A weird character becomes another one after saving it with RSKC!

    When we load a master data from R3 to BW, get an invalid character error which shows the weird character is kind of like two vertical parallel bars (sorry I am unable to give it here since whenever I submit this question, it will become other charact