HT3775 cannot open avi file with quicktime pro7

I cannot open avi file with quicktime pro 7

VideoLAN - Download official VLC media player for Mac OS X

Similar Messages

Cannot play AVI file with Quicktime 7.3.1

Upgraded to leopard and AVI files with mjpg format will not play. Play on older mac with tiger and Quicktime 7.3.1
Appreciate any help
nbg

Apple Discussions!
See QuickTimeKirk's response in this thread. You can also try VLC Media Player.
Whichever one you try, just make sure you repair permissions & restart afterwards.

Can't open avi files in quicktime 7.5

When I try to open avi files with quicktime .5 i am told that Quicktime needs soe extra files and am taken to the quicktime page on appl.com What files do i need? Any suggestions welcome!

'AVI' is a container which can house a variety of codecs.
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, 3.1, 3.1.1, QT 7.3, 7.4.x and 7.5 and OS 10.4.11.
Assuming you already run Tiger versions OS 10.4.11 and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 11 (which is no longer in beta) for Mac from (you may need a different site for the US):
http://uk.real.com/player/mac/
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.
Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS, but please see my footnote if you are running Leopard.)
In earlier versions than QT 7.1.3 in Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
You should also ensure, if you are running Tiger 10.4.11, that you have downloaded and installed all the correct version for your Mac of Security Updates up to and including 2008-003. (N.B. Security Updates require both a restart and a permission repair.)
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
Important: Now repair permissions and restart.
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.
There is an additional 'fix' you could try if you are having problems with Flash and Quicktime, depending on which type of Mac you have:
On Intel Macs, make sure that you are not running Safari in Rosetta. You can check this, and change it, in the Get Info window.
On PPC Macs, go to the Hard Disk/Library/Internet Plug-Ins folder, and drag the file 'QuickTime Plugin.webplugin' to the desktop. Quit and restart Safari. If things have improved you can trash that file. If they haven't put it back, as the lack of this plug-in can cause QT content in some widgets to cease functioning.
And now there is an additional kid on the block: SilverLight. Microsoft has created their own version of what a replacement for Flash should be. You can read more about it here:
http://silverlight.net/
So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards):
http://silverlight.net/GetStarted/
FOOTNOTE
If you are running Leopard:
Some users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1

Cannot open .avi files imported from Nikon d90 in Adobe Premiere 6.0.

Cannot open .avi files imported from Nikon d90 in Adobe Premiere 6.0.
When I try to open the file I get the following error message:
"cannot open that file
the file uses an unsupported file compression format"
I really need urgent help with this so if you know a soloution, please post it!

I don't do mjpeg so you will have to search the forum for advice
But... having a playback codec installed does not ALWAYS mean the codec will work for Premiere editing
After you search the forum and find the (I think free) codec vendors, you will need to install fresh so Premiere will "see" the codec for editing
Or, Google
convert mjpeg avi
To convert to DV AVI type 2 with 48khz sound so the files will "natively" edit in Premiere
My GUESS (you didn't say) is the d90 is a STILL camera that has a video function, not a true camcorder
If you plan to do much video work, you need a tape-based DV camcorder so you use Firewire to do a digital transfer as a "real" AVI that Premiere may edit without conversion or extra software
For a Firewire DV Camera - look at Panasonic PV-GS320 or GS500 (Note that I have not used either, but they have good reviews)
http://reviews.cnet.com/Panasonic_PV_GS320/4505-6500_7-32330317.html
http://reviews.cnet.com/digital-camcorders/panasonic-pv-gs500/4505-6500_7-31660646.html

Cannot open PDF files with Reader XI message appears Adobe Reader has stopped working

Cannot open PDF files with Reader XI message appears Adobe Reader has stopped working. A problem has caused the program to stop working

Which Operating system you are using?
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)] and then try to open the file.

Cannot open pdf files with Firefox's built-in pdf viewer

This just started (I think) with Firefox 37.01. This is on Win7-X64. I cannot open pdf files with the Firefox built-in pdf viewer. If I click on the file or try to open it from within Firefox, it brings up a "opening filename.pdf" message. If I select the "Open with" radio button as 'Firefox (default),' it just keeps looping on this process; it never opens. In Tools => Options => Applications, Portable Document Format (PDF) is indicated as 'Preview in Firefox.' I've never had any other PDF viewer installed on this computer. I've tried disabling all plug-ins and extensions, but it still doesn't work. I searched for solutions but haven't found any for this specific issue.
Thanks for the help.

Hello,
Have you tried, to start Firefox in safemode you can do so by following these steps
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

I cannot open a file with suffix .ra

i cannot open a file with suffix .ra

thats a real time audio file. download real player to open it.
Ryan

Cannot open project file with write access...

I have seen that this problem has been reported before but have yet to find a solution.
I have my project file in an external hard drive. When I plug the hard drive to another computer and want to save it I get this message:
"Cannot open project file with write access. The file may be locked or you don't have permission to write to this location. Select Save As..."
I don't want to Save As because other projects make reference to this file and also my Encore file will be messed up.
FYI both computers use Windows 7.
Any solutions?

Right click on the folder in Question and select properties. Then select the security tab. Make sure you add everyone to the user list. You do that by selecting edit and then add. Type in everyone in the object section and hit ok. Then select the everyone user and checkmark the Full control. Hit Apply and it will adjust the permissions for the folder and subfolders and files.
Eric
ADK

Quicktime doesn't open AVI file with Perian installed

I have installed Perian but Quicktime X doesn't open AVI files for a week. I have repaired permissions. But Quicktime only plays the AVI file if I reboot the Mac. VLC always plays the file. The AVI codec is XVID. Quicktime doesn't play other formats such as FLV. I have deleted .plist files, com.apple.QuickTimePlayerX.plist. I have found other files(com.apple.QuickTimePlayerX.plist.0GH3f31, com.apple.QuickTimePlayerX.plist.0h9MBzV...) that I deleted also. Any idea? Thanks

And now ... surprisingly I view AVI files in Quicktime without Perian.
QT has very limited AVI support (file type and a few older codecs) built in. Most common codecs use by Windows users, however, require the additional support provided by Perian. If the AVI files are now playing in QT without Perian, then simply check the Inspector, Properties, or Info window to see which codecs are in your AVI file and you should be able to tell if they are among those supported "natively" by QT. Also note that this regaining of the ability to play your files may indicate a component conflict of some sort may have existed previously.

Try to open mov file with quicktime, says can't open pdf files.

Hi to everyone,
Suddenly I try to open a mov, any mov file, with quicktime 10.4 and some times opens the finder and nothing more, some times says that it cannot open one pdf document ( a document I actually have but never try to open with QT). some times QT says it canot open some png or jpg file.
But I double click mov files. And the incoherence is permanent, I mean that for the same movie file says it can't open the same pdf file, and in other file the same png, or the same jpg.. it depends on the mov file I try to open. Like if somewhere, somme kind of cache, adresse or reference is wrong.
this is the text of one of those messages when I double click a mov file:
"The document “phoenixRoomfillerB_v001_0104.jpg” could not be opened. QuickTime Player cannot open files in the “JPEG image” format."
And if I try again and again, at some point QT open only the finder window.
The weird thing is that on the finder window i can see the preview and play the preview. and the same mov files play well with VLC. And if I copy the mov file to my desktop it plays well unless QT start to open only the finder window, if that happens it does not work anymore with any file.
The files are on an external drive with 3 partitions.
And I make all the possible cleaning that I can:
I am the administrator of the imac and I am the only one to use it.
I am the owner of the volume
I use disk utility to check and everything is ok
I use onyx to clean as much as possible, cache, boot, volume structure, smart status, home folder permissions, kernel, extensions, QT components, etc. and everything works fine.
Imac 27 inch late 2012.
Intel 3.4 GHz i7
32 Gb Ram
NVIDIA GeForce GTX 680MX 2048 MB
thanx.

Try QT v7.x which is located inside your Utility folder.

Cannot open RAW file with new camera

I just purchased a Nikon D610 that I use to shoot RAW files. When I inserted the SDHC card in my Mac, I got a message that "Photoshop cannot open this file. If you are attempting to open a raw file from a digital camera, make sure you have the latest Camera Raw update installed via Help>Updates..." This is the first time I've had this problem. With my former Nikon D600, the RAW files opened right away with no problems. I installed Adobe Camera Raw 6.7 and DNG Convertor 8.6, but it still doesn't work.

I've got some good news and some bad news.
The bad news is the D610 is supported in Camera Raw but you need a minimum of version 8.3 for it to work out-of-the-box. I know CC works with updates; I believe CS6 does too w/ updates. If you have anything earlier than that you need to upgrade.
The good news is that the D610 is supported in DNG Converter since version 8.3 but I don't know why it's not working for you. What's happening when you go to convert? Same error message?

With OSX 10.8.5 cannot open PDF files with 11.0.04?

using OSX 10.8.5 cannot open PDF files from Xerox Docushare with recently downloaded PDF 11.0.04

That crash is a known bug in Apple's display code.
But it's the QuickDraw code, which Apple does not want to fix.
There is nothing we can do about that OS bug, other than to suggest using a more recent version of Photoshop written to the Cocoa APIs.

Cannot open pdf file with Firefox 11.0

Firefox automatically upgrades the version I am using. Since it was recently upgraded I cannot open pdf files. Am faced with a blank page. I went through some of the suggestions on these pages and when I opened the Tools window, there is a warning:
Firefox PDF Plugin for Mac OS X is incompatible with Firefox 11!
Is there a way around it? Or is it time to say goodbye to Firefox and move to Safari?

When Firefox updates, it turns
off add-ons that are not
compatible with the new
version. In addition, add-ons
that may have been
automatically installed by other
programs without your
knowledge (third party add-
ons) have been disabled. For
more info about re-enabling
add-ons, see the link below.
http://support.mozilla.org/en-US/kb/Add-ons%20are%20disabled%20after%20updating%20Firefox#os=android&browser=m10

Question about opening a file with Quicktime..

Hello,
I would like to open some audio files with QuickTime and not iTunes.
With Panther I used to select ALL the files i needed to modify and then select the default app. for opening them (in this case QuickTime)
Now that I'm running Tiger when I do that all the INFO of each files opens up and I have to make the change one by one.
Any idea?
Many Thanks

Use Option-Get Info.
I don't think this changed from Panther to Tiger, however.

I cannot open dmg files with Yosemite

So installed Yosemite. All seemed fine but
I now cannot open dmg files. If I double click on them, nothing happens. If I say open with "diskimagemounter" nothing happens. If I say open with Disk Utility it says wrong version of Disk Utility. If I move them back to a computer with Mavericks, they open fine. Repaired permissions and no change.
What do I do please?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Download and reinstall the 10.10.1 update.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

HT3775 cannot open avi file with quicktime pro7

Similar Messages

Maybe you are looking for