HT3775 Hi, I cannot play files on my iMac from Sony Camera HDR-SR12

Doeas anybody knows the solution how to play .MPG files on iMac?

If QuickTime or iTunes don't work use VLC

Similar Messages

  • CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

    I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
    Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information.
    Can anyone please help?

    yellowmledbetter wrote:
    Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
    The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
    The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
    But, here goes:
    Your cameras are newer than your raw converter, so it won't understand them.
    CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
    Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
    All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
    DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
    If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
    All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
    I really should be in bed.

  • I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says  '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

    I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says 
    '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.  '' 
    When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says 
    '' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance. 
    Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''  
    I dont know how to get around this please help

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • What do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

    what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

    It can be that you have an old version of Photoshop Elements and a new camera.
    Please tell us
    Which operating system you are running on
    Which version of Photoshop Elements you are using
    Which camera the raw images come from (Make & model)
    Brian

  • Does FCP7 directly imports AVCHD files from sony cam?

    Does the new FCP 7.0 directly imports AVCHD files from sony cam?
    Does it need any conversion? If yes, how is the conversion time, and does the conversion degrades image quality?
    Thanks in advance.
    Desmond

    Which sony camera? there are a lot.
    Yes, it needs to convert. AVCHD isn't a format that most editing systems deal with natively. You will be converting it to ProRes. The conversion time is dependent on too many factors to give a precise number. Based on computer used, processors, RAM, how much footage, where it will be stored...all of that. The conversion doesn't degrade the image.
    Here...I have a workflow tutorial for this: Tapeless Workflow for FCP 7 Tutorial
    Shane

  • Cannot find file when starting jnlp from browser

    First of all, im not a web guru, so sorry for my weak knowledge on that part.
    I have a swing application packed in a war file.
    In the root of war file i put my jnlp, html that links to jnlp, and jar file. (everything created with NetBeans)
    But there is also a directory "data" inside war where i hold some files.
    My application is accessing those files at runtime. (those are save files for my game)
    So, when i start jnlp directly everything is fine, but when i start jnlp through html link, i got error message:
    SEVERE: null
    java.io.FileNotFoundException: data\options.data (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(Unknown Source)
         at java.io.FileInputStream.<init>(Unknown Source)
            ...Java Web Start starts correctly, i can see my first panel of the application, but when i proceed (application tries to load save file), it can not find that file (options.data) obviously.
    How is it possible that everything works fine when i start jnlp directly, and it fails when i start it through the browser?
    What is the problem here?
    Thanks for the help!

    Adoendithas wrote:
    SEVERE: null
    java.io.FileNotFoundException: data\options.data (The system cannot find the path specified)
    Of course the JRE is not going to find a data\options.data on my PC, which is where it will look for it, if your software is running on my PC. Resources for JWS projects must either be available as an URL from the server, or downloaded locally to the user's local file system before they can be used as files. Why it fails to find it on your PC is probably that the 'root path' (the default directory at time of invocation) that is prefixed to data\options.data is different between running it off the local file system, and running from HTML. To say for sure, I would need a lot more information on how you are launching it when 'running locally'.
    A major question here is, does the software merely read the data in options.data, or does it actually need to update (i.e. write to) the options.data?

  • HT4437 Cannot play protected movies on AirPlay from iPad

    I cannot play a movie from my iPad to my Apple TV device. I get an error "cannot play protected movies". Why is this when I bought the digital copy with the Blu-ray Disc ?

    I'm not aware of any third-party receiver that supports video over AirPlay, so you'll probably need an Apple TV. But then, as long as you have a WiFi network in your house, you should be able to play the movie through the Apple TV to your projector without needing Internet as long as the movie has completely downloaded. For more information on AirPlay see:
    http://support.apple.com/kb/HT4437
    In some cases, though, people have reported that even with the rental completely downloaded (or so they said) it still asked to connect to the iTunes Store, so it's not 100% reliable, it seems.
    Regards.

  • I cannot send email on my iMac from Mac Mail.  The account shows that it is offline.  I've recently updated to Yosemite.  I can, however, receive email.  What can I do to fix this problem?

    I cannot send email on my iMac.  I have recently updated to Yosemite.  I don't know if that is the problem or not.  However, I can receive email on all of my email accounts, but cannot send.  It shows that my accounts are offline.  How do I fix this?

    Have you received any tips on how to fix the problem yet?

  • How to work with DPX files in Primere pro from Sony Fs700 with Odyssey 7q

    H i got sequence recorded from Sony FS700 with help of Odyssey 7q it is DPX images how can i get it into Primere pro CC?i try to import files it works but each DPX file last 5 sec long in time line.what should i do?

    I dont use DPX but it sound like you need to import them as an image seqeunce.
    Go to the folder on your harddrive, select the first image and be sure Image Sequence is checked and open.

  • HT3775 QuickTime Player cannot play "mov" file

    Hi,
    I have a problem to play "mov" file.
    regards,

    As Linc said, download VLC media player. Quicktime has limited codecs and would require a plugin to play .mov files, but I personally prefer VLC over any plugin available.

  • Cannot see file and folders copied from other windows 8

    Hi everyone,
    The problem is the next:
    I have new PC for that i was asked to setup and install software, i perform on it clean windows 8 install, it have single HDD 1TB that was partitioned by regular windows setup option to system drive C: 100GB and all left space was partitioned as drive D:
    After setup finish i only boot to system to check that everything is OK and without to make ANY change to windows shut it down.
    I physically disconnect HDD from new PC and connect it via standard USB 3 docking device to my own PC that also run windows 8 i can see the new connected HDD with all partitions without any problem! Than i create on second partition on new drive folder and
    copy there some files, after copy finished i disconnect the drive in safe way by performing "eject" option in windows.
    i connect new drive back to new pc, boot to windows and access the second partition and it ... empty, no folder or files on drive, it also show like no space was used !!!
    MOST IMPORTANT ! - Why it don't looks like security or permission or even hardware problem - NO any major security changes was performed on my own (old) PC, but most important fact when i connect other hdd to same dock station and create folder and copy some
    files and then connect it to NEW PC - problem does not exist !!! i can see and access without any problem the folder and files on both PC's !
    I also tried:
    to reinstall windows on new pc
    to create or delete partition after setup in both PC's
    to check folder and drive permissions and adding "everyone" with "full control"
    to turn on "show hidden files and folders" and "system files" too
    to copy or create new different type files
    Interesting - if i create a folder in NEW PC i can see this folder on OLD PC and copy files to it, but whet i connect drive back to NEW PC it sometimes show the folder have those files and even use the appropriate space and programs even try to open those files
    without any security warnings but it cannot be open properly because files looks corrupted !
    Thanks for any help !

    Hi,
    According to your description, I don't think this is system problem. More like HDD or its interface problem.
    Have you tried to reconnect your new HDD to your own computer again after you copy some file to it but couldn't find anything on new computer. If there is problem in new PC, how about your own PC?
    Please have a try, If there was any progress, feel free let us know.
    Roger Lu
    TechNet Community Support

  • Cannot open file in Onenote client from within OneNote Web App

    I am facing a peculiar problem with One note.
    Environment: - SP2013 Enterprise with separate Office Web Apps server
    I can view/edit onenote files on OneNote web app without any issue but when I click "Open in OneNote" button, I get the error that "onenote cannot open the specified location..."
    Other office documents like word and excel work fine, only onenote has this issue.
    Any help is much appreciated

    Thank you for the update.
    We may try to use the Network Monitor tool to capture the network traffic for bothe problematic site and working site when reproducing this issue, and then read the traffic to find out the differences between them. To capture the traffic, start capturing
    first, then click the “Open in OneNote” button.
    Download Microsoft Network Monitor tool:
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    If you cannot find the differences, you can send the capture files to us via
    [email protected]
    and we will analyse them for you.
    Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Cannot download files (photos, videos etc) from any site. Using v10.0.2 in vista (upto date)

    Vista pc; downloads up to date. Any file i try to download fails. If it is a youtube video for example, after clicking the download button, the download window opens and I see the blue bar fill the aperture as the download progresses. Similarly, in the download folder, I can see the files eg .flv and .part files. The part file steadily increases whilst the eg .flv remains at zero. When the download completes, the .flv briefly displays the actual size of the download but then the files disappear! The mozilla download window then appears which lists the file but I cannot do anything with it. I can download ok using IE 9.08
    Regards,
    Steve

    Select Help ▹ Installed Plug-ins from the Safari menu bar. Besides the following, what plugins are listed?
    iPhotoPhotocast
    Java
    QuickTime
    Shockwave Flash
    WebKit built-in PDF

  • Cannot open files of any extension from My Pictures to PSE11. Have dowloaded correct Raw Plugin 7.4

    Cannot open any pictures in any format from My Pictures to PSE11. I have downloaded correct plug-in for my camera. Error says. Not Valid Win32 application. Please advise...gettting quite frustrated.

    You need to post in PSE forum http://forums.adobe.com/community/photoshop_elements
    Give OS used.  Should not need plug in to open picture unless raw extension.

  • .olb object library cannot open file in 11g - migration from 10g to 11g

    I have an object library (.olb) that will not open in Foras 11.1.1.2.0. It opens fine in 10g. I have tried converting it to ascii (.olt) but it will not creat the binary filie in 11g - get PDE-PER001 Internal Error (cakaa 2) when I try to convert any ascii file from 10g into 11g.
    I have tried using frmplsqlconv, the conversion tool on .olb but get following error when it is run: ERROR opening easstnd.olb :oracle.forms.jdapi.JdapiStatusException: Failed to load olb
    Check subclass and library dependencies
    Any help appreciated!
    Kim

    Kim,
    We are not migrating yet, and we have not started converting all our forms and reports, but for the tests we have done, I never had to use frmplsqlconv (in fact, I don't know what it is). What I have done is:
    1) As I told you before, I copied everything (forms, reports, etc.) we have to a new location.
    2) I opened ALL the pll files with Builder 11g, saved them, and generated the plx files. The only problem I encountered here was that with some plls, Forms Builder crashed when opening them. I had to open those with Forms Builder 10g, and remove program units one by one until I found the culprit. After removing the program unit causing the crash, I opened the pll successfully with Forms Builder 11g, and created the program unit I had deleted.
    3) After all plls were generated, I opened the forms I wanted to test, saved them, and generated the fmx files.
    4) Same thing with reports (rdf and jsp files).
    I have never gotten an error in Builder when closing plls, and we don't have either .fmt or .pld files.
    Carlos

Maybe you are looking for