HT3775 i cant play some videos that has flv please any solution to it? thanks
i cant play some videos that has flv please any solution to it? thanks
agodey4,
Some reading here, mant players for download, do w= a web search.
http://www.ifunia.com/mac-os/howto-play-flv-videos-on-mac-os-x-lion.html
Similar Messages
-
i cant play some online videos. why? is there anyways to play them, i cant play some online videos. why? is there anyways to play them, i cant play some online videos. why? is there anyways to play them?
What error messages are you getting? The videos are likely created with Flash, or another plug-in, which can't be played on the iPad.
-
4.2.1 was supposed to fix problems, but it only created new ones. No video on some movies, no audio on others, and can't even play some movies. Can you please provide a means to restore 4.1.1?
Let me try again, Chenks. I'm a technical person by profession, and so can get deeper into things like this, but I have not attempted to use these methods of communication in the past. I'm trying to get some feedback to Apple on their worsening a product and really messing with existing customer configurations. I'll try to break things up below.
1. Configuration:
Existing Apple TV and Mac Mini configuration in place since December 2010.
Three Apple TVs, one in Family Room for music and movies, one in Master Bedroom for music and movies, the third one in the Living Room for music only.
I'm using iTunes as library. (Probably an obvious statement, but wanted to mention that.)
2. Pre 4.2.1
No problems at any location since configuration finalized and all equipment installed in December.
Since December, Family Room entertainment equipment was updraded to a new Sony Bravia 3D, and a new Pioneer receiver. The Master Bedroom still has the original Toshiba 32HLC56 TV. That unit has only one HDMI input. I'm using the built-in speakers. This TV/Monitor is about fives years old.
3. Problem
I updated the software in two of the Apple TVs to 4.2.1. I updated the Family Room device and the Master Bedroom device. I had not updated the Living Room device.
After updating to 4.2.1, the Family Room equipment works fine. That's the location with the newer TV and receiver.
The Master Bedroom has different problems with different movies: e.g. "The Little Mermaid:" video, no audio. "The Lion King:" movie wont start at all.
Additionally, in the Master Bedroom some movies work fine, other movies start but immediately go into pause mode. Pressing pause button on Apple remote will not initiate start of movie, screen does "flicker" for a moment but movie does not start to play, showing only the last frame that had been streamed.
4. Not really a problem for me.
Fortunately for me, I had not updated the Apple TV in the living room so I used it to troubleshoot the problem. Initially I thought it was a defective Apple TV in the Master Bedroom. I took the unit to the Apple Store in town and they exchanged it for me. I brought the replacement Apple TV home but I did not install it immediately.
While testing the Master Bedroom set up once again to make it was working for our afternoon movie watching, I was again reminded that a software update was available. That message came up because it was the unit I had brought over from the Living Room. I proceeded to update the Apple TV to the new software version (4.2.1).
As soon as I "updated" the software in the Apple TV to the new 4.2.1, the same problems manifested themselves. At that point I suspected that the problem was with 4.2.1, and not with the hardware.
I called Apple Support and went through a series of troubleshooting techniques. We tested the Apple TV with the new 4.2.1 installed in it. This is the unit which originially in the Living Room. Under the direction of the Apple TV support technician, I used the Family Room gear and the Master Bedroom gear to try and isolate the problem to hardware or software.
We eliminated the following as potential problems:
a. TV speakers in the Master Bedroom
b. HDMI cable
c. Ethernet connection
5: Conclusion:
Fortunately for me, again, the Apple TV that the Apple Store had given me that morning still had 4.1.1. So I installed that unit in the Master Bedroom and everything started working normal again.
6. Side note:
An interesting observation: In early March I copied several movies from the Mac Mini to my iPad and some to my wife's iPad. All movies worked fine on our flight out and while we were away.
My wife recently (about a week ago) updated the software in her iPad. and now some of the movies that played just fine on her iPad are exhibiting the same problems as the Master Bedroom TV when it is connected to an Apple TV with software 4.2.1.
Apple has been trying to fix some problems in 4.2 when it released 4.2.1. I make that observation based on recent articles I found on the web. Most likely the Apple engineers were trying to fix things in one place and broke them in another.
Clear as mud, isn't it?
7. In closing:
I'm good to go, I just need to remember not to update the software in the Master Bedroom Apple TV. I want to keep that unit at 4.1.1. It's possible that Apple might come to the realization that they hosed things for some of us. Because I do have three units in my home, I can experiement with the other two units should a "fix" come out. I can then update one of the two devices, connect it to the Master Bedroom TV, and see if the problem was corrected. If not, I stay with 4.1.1. But I'm not convinced that Apple will see this as their problem, it's always easier to point elsewhere.
Regards, -
Why I cant add some video files to itunes library?
I have got new ipad 32gb model. I thought I will play some song videos or movies on it from my PC. I added video files to the itunes library. But I see only few files that are added to the itunes library. I cant add some video files to itunes library no matter what I do. Due to that I cand all movies to my Ipad. Please help!
Hi like to explain my experience,
I am using Windows 8 PC and Windows 7 Lap top.
I convert my video to ipad format and add to library in the itunes.
But it was not accepting and these steps worked for me.
1.Convert your video using videoconverters. For freemake video converter works well. You can also use Quicktime pro or Miro video converters. There are many softwares freely avilable.
2.Connect your i pad to your PC/ Laptop.
3.Open your itunes, it should show your ipad and Library.
4.Open the folder of your converted video and try to opening it using itunes by right click.
5.Your converted movies will open in itunes and add to home sharing videos in Library movie option after you login with your apple id.
6.Slect sync movie option and syncronising it.
7.It will come in ipad -
i cannot play my videos or shows on itunes any more. i get the message saying "windows can check online for a solution to the problem" " i tunes has stopped working"
Hi marymike,
The crash signature is simalr to that mentioned in the thread: https://forums.adobe.com/thread/644139
Please try the suggested steps mentioned and check.
Regards,
Rave -
I am trying to play some videos from the internet and I get the message "missing plug in". I click on the message and downlaod adobe flash player as prompted. When I log in again to play the videos, I still get the missing plug in message. Any suggestions??
that used to happen to me all the time! I would recommend going to a different sight or attempting to download it again ( you may have missed a step it can be tricky).
-
Problem capturing video that has no timecode
I have some video that I want to capture in FCP that is on a VHS tape. So, I hooked up the VCR to my camcorder then camcorder to my computer, of course. The video plays in my log and capture window. So far everything is cool. The problem occurs when I try to capture the video. FCP can't find a time code from the VHS tape and won't start to capture. Is there a way to capture without timecode? Or, what can I do to capture this video?
All true...
OP...bear in mind that Sugarmansmile's suggestion would be optimal, if you ever need to recapture the media...you'd need the timecode.
Any quality hit is happening in the DV device anyway, so it's simply a matter of time to dub (for timecode) vs. speed (without timecode).
K -
How to edit both audio tracks with video that has two tracks?
I have video that has 2 tracks with it. Both however are marked ch. 1 on the premiere timeline. The properties say they are 48000 hz audio. Now when i hilight both tracks and right click to edit in Audition, only one comes over. I am wondering a few things here. Why are they both the same channel and how can i edit both of them at once since they ae exactly the same in Audition? Do i even need both tracks?
Well, that's another nasty problem with multicam editing in PP. It cuts only the video but not both. The audio track is always that of the first selected clip (of that in the first video track) when I create a multicam sequence. I have manually to open it in the timeline, enable or disable certain audio tracks, go back to the sequence and cut. But when I have to switch the audio for only some camera angles it is impossible, because I can only change the audio track for the whole sequence. Or do I miss something? Maybe it is another cool "design feature"?
-
How do i play a video that is in my iphotos in slow motion? please advise
How can I play a video that is in my iphotos in slow-motion
Export them from iPhoto and use a player that supports Slo-Mo.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue. -
How come itunes says i cant play some of the music i downlooaded.
I downloaded all my music from cds that i bought and itunes says i cant play some of the music.
What is the exact error messages you are receiving? Are you saying iTunes is unable to play these imported tracks in iTunes?
B-rock -
How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload? -
Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help
It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
Note that this can't happen if your iPhone is not connected to a WiFi network:
When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
from here: http://support.apple.com/kb/ht4106 -
I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
Plus, EXACTLY what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download -
Have uninstalled the Flash Player and reinstalled, it will play some videos but others and when I bring up the YouTube home page it still gives me this error. Help !!!
this thread might be helpful to you [https://support.mozilla.org/en-US/questions/835924 https://support.mozilla.org/en-US/questions/835924]
-
I am having trouble with Itunes registering the Mp4 video that has been converted. Help!!
I am having trouble with Itunes registering the MP4 video that has been converted. Help!
What do you mean by iTunes registering the mp4?
Which iTunes, on iPad, iTunes is a Store and it won't take your .mp4.
On pc, check if it supports the mp4 (there are a number of different mp4 format) you have converted.
Can you import it to computer iTunes?
Maybe you are looking for
-
Can you please put me in touch with the support for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstal
-
How to unassign handling unit in outbound delivery?
(Don't Want to delete HU onlu unassign it from delivery: WM requirement) I would like to unassign HU in an outbound delivery. code i'm using make the handling unit disappear in the overview of HU. but corresponding line in the "item overview" are sti
-
Envy Phoenix h-9 1350 Windows 8 Pro. Processor- Intel (R), core(TM) i7, [email protected] 64 bit, Ram 12.0GB Hi, I have an HDMI on my pc and also a HDMI connection on my 52 inch TV. I want to connect those two connections so I can watch movies on my
-
Is there a better way to position a flash movie than ap div?
I'm creating a new website(not yet active) and have a great flash movie for the home page. I've place it in an ap div and of course it moves to a different position in different browsers. Is there any way I can get it to display correctly, or is the
-
Profile Picture Quality (Low) How to fix?
Hi Skype Team, Is there a way I can make my profile picture hd quality size for the xbox one? What Resolution of picture would I need for it to look full quality on my Xbox One? Thank-you, Shawn