HT3775 I have a webpage where I embeded more than 2 quicktime players. I want that at a time , only one player is played. When second player is played the first one should stop. I am using simple EMBED / OBJECT tags to embed the player.

I have a webpage where I embeded more than 2 quicktime players. Only one player need to play at a time. When second player is played the first one should stop. I am using simple EMBED tags to embed the player.

Similar Messages

I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck.

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

Accounts that have not been logged into for more than 90 days

Hi Folks,
Good Day.
Can anyone help me to update below powershel script?
below script find in my domain all the AD users accounts that have not been logged into for more than 90 days and export the report to .csv file. in addition what I want:
1. OU=Others, Sales --> exclude this OUs
2. Disable all the user based on 90 days export report .csv file
import-module activedirectory
$domain = "test.com"
$DaysInactive = 90
$time = (Get-Date).Adddays(-($DaysInactive))
$timer = (Get-Date -Format yyyy-mm-dd)
# Get all AD User with lastLogonTimestamp less than our time and set to enable
Get-ADUser -Filter {LastLogonTimeStamp -lt $time -and enabled -eq $true} -Properties LastLogonTimeStamp |
# Output Name and lastLogonTimestamp into CSV
select-object givenname,Name,@{Name="Stamp"; Expression={[DateTime]::FromFileTime($_.lastLogonTimestamp).ToString('dd-MM-yyyy_hh:mm:ss')}} | Export-Csv c:\temp\90DaysInactive-$(Get-Date -format dd-MM-yyyy).csv –NoTypeInformation
Many thanks for advance Help:

Hi Anna,
Good Day.
Many thanks for your responce.
with your help i can manage to exclude the OUs as wellas can get the .csv report via mail.
Now i want to disable all the user based on 90 days export report .csv file.
could you help me on this please? the report will come everyday like below:
filename=90DaysInactive-dd-mm-yyyy.csv
sample output:
Given name User Name
Last LogOn
Test User1 user1
03-10-2006_05:30:59
Test User2 user2
02-10-2006_12:00:34
import-module activedirectory
$domain = "test.com"
$DaysInactive = 1
$time = (Get-Date).Adddays(-($DaysInactive))
$timer = (Get-Date -Format yyyy-mm-dd)
$FileName="c:\temp\90DaysInactive-$(Get-Date -format dd-MM-yyyy).csv"
$from = "[email protected]"
$to = "[email protected]"
$smtpHost = "smtpservername"
$Subject = "90 Days Inactive Accounts"
$body = "90 Days Inactive Accounts report"
# Get all AD User with lastLogonTimestamp less than our time and set to enable
Get-ADUser -Filter {LastLogonTimeStamp -lt $time -and enabled -eq $true} -Properties LastLogonTimeStamp | where {($_.distinguishedname -notlike "*OU=HR*") -and ($_.distinguishedname -notlike "*OU=OT*")} |
# Output Name and lastLogonTimestamp into CSV
select-object givenname,Name,@{Name="Last Logon"; Expression={[DateTime]::FromFileTime($_.lastLogonTimestamp).ToString('dd-MM-yyyy_hh:mm:ss')}} | Export-Csv c:\temp\90DaysInactive-$(Get-Date -format dd-MM-yyyy).csv -NoTypeInformation
Send-MailMessage -From $from -To $to -Subject $subject -cc $cc -SmtpServer $smtpHost -Attachments $FileName -Body $body -BodyAsHtml
Thanks for your advance help.

We have two iPads. mine is the first one purchased. I opened iTunes to put some photos from the Mac to my wife's iPad. I plugged in my wife's iPad. Both ipads have the same apple id and password. iTunes synced everything from my iPad to my wife's iPad. N

We have two iPads. mine is the first one purchased. I opened iTunes to put some photos from the Mac to my wife's iPad. I plugged in my wife's iPad. Both ipads have the same apple id and password. iTunes synced everything from my iPad to my wife's iPad. Now we have two identical iPads looking like mine. Everything on her ipad seems gone and replaced with mine, all her recent holiday photos, emails, settings, etc etc seem gone.
I'm toast!
Help!!
LJ

How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
 Cheers, Tom

Do I need a different apple id for each device? I have two iPads and an iPod but can only purchase things on the first one. When I go to verify the questions they say they are wrong.

Do I need a different apple ID for each device I have? I have two iPads and an iPod but I can only make purchases with the first one I purchased. It tells me the security questions are wrong but I know they are not because I wrote them down. I have also reset them and my password once. Please help if you can

You can not login into iTunes or the App Store using VPP credentials. You must purchase all apps/book/etc. from the VPP website. Then you can redeem the codes thru itunes/app store or import the codes thru apple configurator. Here is the url for the VPP website: https://volume.itunes.apple.com/WebObjects/MZFinance.woa/wa/login?cc=us
(It will not affect any of the apps you already have but the id can only be used for VPP.)
Cheers,
Alec

I use my 7th gen ipod on bluetooth and when the battery dies while on bluetooth it wont turn on or charge and the computer doesnt find it. This is my 2nd nano in just over a month. The first one had the same problem. how can i fix this?

I have the latest ipod nano (7th gen, 16gb) and I use it mostly on bluetooth. When the battery dies during use with the Bluetooth it doesn't take a charge, the battery doesn't turn on and of course the computer doesn't even acknowledge that it's plugged in. This is my second nano in just over a month, the same thing happen with the first one. I just want to know if their is a way to fix this so I don't have to keep sending it in? Or maybe pay the difference to upgrade to a touch?

If the battery has been completely depleted on the Nano (not really a good idea) then it is going to take 15 to 30 minutes before your computer can see it. Same thing will happen with an iPod Touch.

How to Capitalize the first letter or an entire word using a shortcut on the keyboard just like in microsoft that uses shift+F3

please how can one How to Capitalize the first letter or an entire word using a shortcut on the keyboard just like in microsoft that uses shift+F3

What do you mean there was "no effect?" I'm not aware of any effects.
It looks like that Service is also in the App Store. From their screen shots, the services are prefaced with WordService:
You can see an example in the App Store for their app: App Store
After installing, you should now have those text services in your Services menu. You can then add shortcuts in the Keyboard System Prefs.
Most Apple apps have a Transformations menu in the Edit menu. You can Make upper, lower, and Initial caps with those. I would stick with Word Services, but you can make Application Shortcuts for the items in the Transformations menu.
Again, in Keyboard System Prefs, Under Applications, Click the Add button on the right side pane.
Set it for All Applications
Enter the menu command exactly as they appear in the Transformation menu (separate entries for each),
Make Upper Case
Make Lower Case
Capitalize
Give them a shortcut.

How to stop a second while loop when the condition in the first one is met for different VIs

Hi, am running two seperate Vi's. am new to labview so please help accordingly.
I have introduced a comparison test in one Vi through ashift register. i would like now the second Vi to stop when this comparison condition in the first Vi is met.
I dont want the first Vi to stop, it should only stop the second Vi while awaiting for the next input.
waiting for your help guys

Thanks so much guys. am now starting to pick some ideas. i have attached the Vis as requested for best identification of the help.
waiting help guys
best regards
Alex
Attachments:
first Vi.vi ‏132 KB
second vi.vi ‏149 KB

Will the new watch be able to be used as a fob watch? In the NHS we are not allowed to wear wrist watches so this would be a great selling point.

Will the new watch be able to be used as a fob watch? In the NHS we are not allowed to wear wrist watches so this would a really useful feature.

will there be a mount for the watch that facilitates it being clipped onto a uniform rather than kept in a pocket to get broken or lost? I understand that it might not be able to do some of the more technical things like keep track of my pulse etc. However if it doesn't have the facility to be worn as a fob with a specific mount it's not going to be any use to lots of people. I possibly wasn't very clear in my first question.

Have to click on firefox icon more than once to start the programme

Sometimes I have to click on Firefox icon more than once to start the programme. Multi-clicking on the icon does not always start multiple windows ie the programme just isn't starting sometimes on 1st click.
Firefox always opens when using a hyperlink in an email, document etc.
Have tried creating a new quick launch & also re-installing.
Happens on two PCs - 1x Vista & 1x XP
All help is appreciated :)

First let me disclose that I am not an expert nor even much less. However I used to have this slow as a turtle opening of FF until I got rid of my antivirus software which at the time was Avast. I switched to Microsoft Security Essentials and have had no problems since. FF loads in 3 to 4 seconds!

When trying to download the latest itunes it stops half way through and says "error occured whilst installing the update

when trying to download the latest itunes it stops half way through and says "error occured whilst installing the update"
anybody know how to fix this?

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

I have 3 consecutive movie clips that I am trying to drop into the drop zone but it only recognizes the first one and only produces the firts one in a DVD. How can I drop all three movie clips into one drop zone

On IDVD, I have 3 consecutive movie clips that I am trying to drop into the drop zone to create a DVD but it only recognizes the first one I dropped and only produced the first one in a DVD. How can I drop all three movie clips into one drop zone.

I have had some luck doing the following: Export each clip from imovie as a quicktime clip. Open iDVD and create a new project. Import a few stills into iDVD and then click on the button that gets created to get into the screen where the individual slides appear. Drag each quicktime into that screen and arrange in the order you want. You can then delete the stills. The button that appeared when you dropped in the stills will launch a complete show.

When I record a second track, garageband will record the first one again, even if I'm with headphones on. How can I stop it?

That's really annoying, because I can't put an effect in the second track, once that the part of the first track that's together will be changed too. And it happens with a third track, and so on, the other tracks will be together with the track i just have recorded.
If anybody could help me, I'd be really grateful.
P.S.: it only happens with the audio recorder, and it didn't happen before.

I'm using GB 1.4 for Ipad 4, my IOS is 6.1.3, and the only mic is the one of the Ipad.
That's exactly the point: I'm recording the second track and the audio of the first one is appearing in the background, but the music is only being played through the headphones, and there is no way for the audio recorder be listening to it.
The first track i just sing with the guitar, then I tried to put a solo and backing vocals and this started to happen...
Thank you for the attention!

I am webmaster for our church (C of E) in Dorset, UK. The church has charitable status, and is cash-strapped. I am searching for the cheapest download package in order to use Photoshop & Dreamweaver - at home and in the Parish Office. This page (https:

I am webmaster for our church (C of E) in Dorset, UK. The church has charitable status, and is cash-strapped. I am searching for the cheapest download package in order to use Photoshop & Dreamweaver - at home and in the Parish Office. This page (https://www.adobe.com/content/dotcom/uk/volume-licensing/non-profit.edu.html) suggests that we are eligible for discount BUT provides no information on pricing for me to present to the PCC for them to authorise purchase. Any tips?

You have to contact a reseller and they will fix you up with a plan and verify your eligibility. That's just how it work. when you are eligible, the normal student pricing applies, give or take any extra discounts based on the number of licenses you buy, which would not apply in your case.
Creative Suite 6
Mylenium

HT3775 I have a webpage where I embeded more than 2 quicktime players. I want that at a time , only one player is played. When second player is played the first one should stop. I am using simple EMBED / OBJECT tags to embed the player.

Similar Messages

Maybe you are looking for