HT3775 i need codec format to support audio to play movies?

i need codec format to support audio to play movies

Just download the free, open-source media player VLC. It plays pretty much anything.Get VLC here:
http://www.videolan.org/vlc/download-macosx.html
Also, beware of dodgy internet sites that say you can't play a movie and offer to install a 'codec' for you. They're typically malware or spyware.

Similar Messages

5.1 sound blaster audio is giving corrupted audio while playing movies

Hi Frenz,?am using sound blaster 5. sound card with creative inspire 5. speakers... when playing movies, it gives very corrupted & disturbed?audio like a repeated one... there is no 5. audio ouput, only front & center speakers work... can any one plz help me out of this problem?...

Read this.
The same principles apply to your 5.1 mix.

No audio when playing .mov files, codec missing?? Please HELP!

Hey everyone, i recently exported a movie in submerge (a softWARE THAT lets u put subtitles into movies), i can watch it just fine in my computer, but when i put it in another, mac, i get the video but no audio... Im i missing a codec? i just downloaded the Xvid codec, but nothing, still no audio. What can i do? please help!!

Load the movie into QuickTime Player, open the Movie Inspector (Window menu), and look at the Format section. That will show the codecs used for the video and audio, the audio being the second one listed. Post that information here and someone can probably tell you what you'll need.
Regards.

I now need sound switch up for audio to play out

I Alway use my iPad to watch tv and until yesterday it didn't need to have the sound switch unmuted. Why do I now need to have sound active for the sound to play on a video?

Hello bkarschnick,
Thanks for contacting Apple Support Communities.
Your computer may not supply audio via the Mini DisplayPort. Take a look at this article for your compute and find out if it supplies audio.
About Mini DisplayPort to HDMI adapters
http://support.apple.com/kb/HT4241
If your computer is on the list that should supply audio and video, then take a look at this to adjust your sound output.
OS X Mavericks: Adjust your computer’s sound output
http://support.apple.com/kb/PH13908
Regards,
Jeff D.

Need codec pack for h.264 to play .mp4

I bought a motor sports camera that records HD format that doesn't seem to work with any media player I have!
I quote from their website under the trouble shooting section:
"+If using Windows Media Player or Movie Maker, make sure you download the latest HD-capable version and also download a H.264 decoder to update media or movie maker. CoreCodec CoreAVC is one company that offers a codec pack for h.264.+
+VLC media player is another video media player program that you can download for free, which supports .mp4 h.264 files+"
I don't use PC, I am using my MacBook Pro and I have iTunes, iMovie, VLC, QuickTime Pro, DivX and Real Player but none can run the recorded movies.
Any help would be appreciated. And thanks in advance to all.

Thanks to nobody as I see nobody jumped in... but it turned out to be a problem with the camera itself. Shipped it back and got it replaced. And the problem disappeared.

HT3775 My Quicktime Player says that it can't play .mov files...

has anyone else experienced this or do you have any suggestions to remedy the situation?

I'm sorry, I should have included
"and I actually need to use the .mov because I'm currently working on a film collaboration project, I'm an audio student, and compressing it into a different file type (particularly mp4) messes up the frame rate and thus destroys the timing of all of the audio I have already programed to match the final video format."
but I guess I didn't feel the need ...
anyhow, it turns out my particular quicktime will record and export .mov files which it will also read, and I've used this specific .mov file on another computer both in Pro Tools and in Quicktime, so it's a my comp specific seeming problem which makes me wonder if there is A) something wrong with my quicktime or B) a setting somewhere that I'm not finding.
Unfortunately the Google search I did proved a bit fruitless.

No audio when playing mov files in WinXp SP2

My quicktime 7.1 will not play any sound and Freezes up.
I've set audio to safemode and video to to safemode,
still no audin in playback.

My Quicktime movies didn't freeze although I had
NO Sound with Quicktime's movies made with our camera.
solution:
Open your Quicktime movie.
Click; Edit
Click; Preferences
Click; Quicktime Preferences
Click; Audio
under Devices Click; Select Audio Playback and Recording Devices
under Sound playback Click; Advanced
under Speaker setup Click; Quadraphonic or the, stereo speaker choices
(do not pick any of the Suround Sounds, 5.1, 7.1, or no speakers)
You must close your Quicktime movie to reset it.
Open the same movie or another one that wasn't working and listen for sound.
If still no sound, follow this list back to Speaker setup and put it back where it was.

HT1657 No audio while playing movie

When we play a rented movie on Apple TV, there is no audio. What could be the problem? The ATV is connected to Internet through WiFi. We have a broadband connection.

Convert the video fiel again using this:
Free iPod Video Converter 1.32 build 852
http://www.ipod-video-converter.org/index.html

Supported formats for capturing audio

I need to capture audio in PCM format.
According to the JDE 4.6.0 Multimedia Guide:
"The BlackBerry® smartphone uses two formats to record audio: Adaptive Multi-Rate (AMR) and 8 kHz mono-16-bit pulse code modulation (PCM). By default, the format is AMR.
PCM: capture://audio?encoding=pcm or capture://audio?encoding=audio/basic"
However, when I run the code:
Manager.createPlayer( "capture://audio?encoding=pcm" );
This works on a Pearl 8100, but on a Pearl 8330, I get a MediaException, with the error:
Unsupported record encoding type
Do all handsets support PCM encoding? If not, where would I find out the capabilities of the different models?

Supported audio formats by BlackBerry -
The following audio formats (including extensions) are supported:
ACC - audio compression formats AAC, AAC+, and EAAC+
AMR - Adaptive Multi Rate-Narrow Band (AMR-NB) speech coder standard Supported AMR-NB rates are 4.75 KBps, 5.15 KBps, 5.9 KBps, 6.7 KBps, 7.4 KBps, 7.95 KBps, 10.2 KBps, and 12.2 KBps. AMR
files must conform to the standards specified in the Internet
Engineering Task Force (IETF) Request for Comments (RFC) document
RFC3267, Section 5, on the Internet RFC Archive web site.
MIDI - Polyphonic MIDI (.mid, .midi, or .smf)
MP3 - encoded using MPEG Part 1 and Part 2 audio layer 3 Supported sample rates are 16kHz, 22.050kHz, 24kHz, 32kHz, 44.1kHz, and 48kHz.
WAV
- supports sample rates of 8 kHz, 16 kHz, 22.05 kHz, 32 kHz, 44.1 kHz,
and 48 kHz with 8-bit and 16-bit depths in mono or stereo WAV files
created using audio codec GSM6.10 are supported. However, BlackBerry
8830 series smartphones do not natively support Global Systems for
Mobile Communications® (GSM®) encoding and require the BlackBerry
Attachment Service from either the BlackBerry® Enterprise Server or the
BlackBerry® Internet Service. See KB13547 for more information. Note:
Playback of WAV files received as email message attachments requires
BlackBerry Enterprise Server software version 4.1 Service Pack 2
(4.1.2). Note: If the BlackBerry smartphone
user has a BlackBerry Internet Service 2.3 account with BlackBerry
Device Software 4.2 or later, WAV voice mail files will work.
Windows Media Audio (WMA 9) Standard Profile Decoder WMA 10 Professional M0 Profile Decoder WMA 9 Profile Decoder and WMA 10 M0 Profile Decoder are only supported by BlackBerry Device Software 4.2.1 or later. See KB05419 for more information.
The
following audio file extensions are also supported (depending on
BlackBerry smartphone model and BlackBerry Device Software version):
.avi containing PCM, MP3, AAC, AAC+, eAAC+, H.263, MPEG4-SP, MPEG4-ASP, uLaw/aLaw, GSM610
.3gp containing MP3, AMR-NB, AAC, AAC+, eAAC+, H.263, MPEG4-SP, MPEG4-ASP, uLaw/aLaw, AMR-NB
.mp4 containing MP3, AMR-NB, AAC, AAC+, eAAC+, H.263, MPEG4-SP, MPEG4-ASP, uLaw/aLaw, AMR-NB
>.mov containing MP3, AMR-NB, AAC, AAC+, eAAC+, H.263, MPEG4-SP, MPEG4-ASP, uLaw/aLaw, AMR-NB
.wmv containing WMV, WMA9/10Pro
.aac and .m4a containing AAC, AAC+, eAAC+
.wav containing PCM, uLaw/aLaw, GSM610
Note:
Support is available for streaming stereo audio over a Bluetooth®
connection (A2DP and AVRCP Bluetooth profiles) on the following
BlackBerry smartphone models:
BlackBerry® 8800 Series smartphones (running BlackBerry Device Software 4.2.2 or later)
BlackBerry Curve 8300 Series smartphone (running BlackBerry Device Software 4.2.2 or later)
BlackBerry Pearl 8100 Series smartphones (running BlackBerry Device Software 4.2.2 or later)
Note: DRM (Digital Rights Management) copyright protected files will not play on BlackBerry smartphones.
Source: KB05482
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Premiere Pro Does Not Support Audio-Only Capture For Some Formats, Such As HDV?

In the PPro CS 5.5 Help file under, "Recording audio", it says:
"Note: To capture an audio-only file from a digital video source, choose Audio from the Capture menu in the Logging pane of the Capture panel.
"Premiere Pro does not support audio-only capture for some formats, such as HDV."
I'm shooting in HDV and if I want to capture audio only, would I just need to switch my setting to DV?
The only thing is my Canon HV20's HDV audio is MPEG-1 Audio Layer 2, 16 bit, 48 kHz.
My DV setting is PCM audio, which I think is a better quality format, right?
Would there be any noticeable difference?
Thanks.

Capture your HDV material in the normal way and just drag audio only from the source monitor to the timeline.

Stereo Mix Audio format not supported?

Hi
I'm pretty new at streaming, and i need help with my audio setup, I'm selecting Stereo Mix from the dropdown menu in the FMLE 3.2 but when i do it says.
"Audio format not supported."
"Audio format provided by audio capture device is not supported by this application."
I don't really understand why, since my mic device is supported. Why does this occur?
And how can I fix it?
I have a motherboard soundcard "VIA HD".
EDIT: I figured out why it doesn't work.
I went to the Recording devices menu to check the options but I noticed that Stereo Mix was "Currently unavailable" I figured maybe a program was using it but I don't know how to check what programs use the device.

I have noticed something else which is weird : the recording device is ALWAYS called "Line 1".
I tried renaming both the VAC playback and record devices Line 1 to other names, FMLE still displays "Line 1". This makes no sense (and Audacity sure doesn't behave that way, I have checked).
Should I need to make a complete uninstallation to wipe old FMLE settings ?

! Urgent !!! Supported audio formats

Its urgent,
I need to run more audia formats in flash movie at run time.
Can anyone tell me:
What are the audio formats that can be loaded in to flash
movie at run time?
Is thr any way to convert any uploaded audio file format to
supported formats?
Thanks for any Help..
Thanx
Avinash...

Thanx for your comment.. but this is not my answer..
I am working in flash php project which requires
functionality to play sound files which are currently in use like
midi, wav, mp3.. As far as i know mp3 is the only file format
supported by flash. in this regard i want to know some extra
details Like: Is some other format which supported by flash?, Is
there any conversion process in flash to convert file in other
supported formats?, Or any tool which can convert uploaded file
on-the-fly?

How To Get Supported Audio Formats?

If I have a particular Mixer how do I get the supported Audio Formats
for every line?
I know DataLine.Info has a getFormats() method.
How do I get a DataLine.Info from a Line?
I know how to get the Source and Target Lines and they subinterface
DataLine, I just dont know how to get the DataLine.Info from DataLine.
Thanks a lot!

Mr Evil, thanks a lot! That was very helpful.
Your code is going to help me quite a bit when I get to 24 bit audio.
I love that JSR page. I did miss that relevant FAQ question though.
Instead of checking for instanceOf i was casting within a try catch.
It should work now.
Is there anyone alive in this forum?
I'm guessing that sound is not a popular application for Java. That was funny. I feel your pain.
I cant wait to get out of the nuts and bolts of java sound so i can
move on to the actual DSP fun : )

Dose the HDMI Cable have Audio Support or do I need to use the Optical Audio Port on the ATV?

I recently noticed that the Apple TV has an "Optical Audio" port on the back, next to the HDMI port. Before I buy one, will I need to buy a Optical Audio cable, or will the HDMI cable suply sound to the TV?

HDMI carries both audio and video. The optical port is for connecting to a receiver/external speakers.

Sound has stopped working; failed to play test tone; format not supported by the device (Vista x64 Ultimate)

I can no longer hear any sound from my speakers/headphones. This happened suddenly yesterday without any hardware changes or noticeable software updates.
-- The sound is not muted and the volume is set to full.
-- In the device manager, my SigmaTel HD Audio device has no warnings or errors.
-- I can't find any related messages in the Event Viewer.
-- The primary audio device is selected as the default for playback. The mixer shows my media player as being mixed properly to the device.
-- In the sound control panel, under Playback > Speakers/Headphones > Properties > Advanced:
- I get the error message "failed to play test tone" when I try to Test my Default Format (dvd quality)
- I get the error message "format not supported by the device" when I try to change my Default Format
-- Note that unlike others who have similar problems, I'm not joined to a domain
I've tried
* rebooting
* uninstalling and reinstalling the driver for the sound card
* "disable all enhancements" in the sound control panel
(http://social.msdn.microsoft.com/forums/en-US/windowspro-audiodevelopment/thread/b09e43ba-3ffa-4a45-9593-8eee686f124a/)
* looking in the registry for some registry key (not found)
(http://www.consumingexperience.com/2009/04/failed-to-play-test-tone-no-sound-on.html)
Computer details
Dell XPS M1530
Vista Ultimate x64 SP1 with current updates
SigmaTel driver version 6.10.0.5866
**Update**
I followed the following steps:
    * using regedit, go to HKLM\System\CurrentControlSet\Control\WMI\AutoLogger\Audio and change the “Start” value from 0 to 1.
    * Reboot the machine
    * Try to play an audio file.
    * Post a link to the generated log file which you can find in: %WINDIR%\system32\LogFiles\Audio
but don't know where to post the resulting AudioSrv.Evm.001 file. It's also not human readable and I can't find what utility parses it for reading.
**Another update**
Still can't read the EVM. logparser 2.2 can't parse it.
Found this thread which interested me but isn't applicable to x64 (I think):
http://social.msdn.microsoft.com/Forums/en-US/mediafoundationdevelopment/thread/94cdc662-e974-43de-8feb-6eb156924347
**YAU**
Dell confirms it's an OS issue after troubleshooting with me for a couple of hours (wow)
Is there a way to look at this EVM file _without_ installing the Windows Driver Kit??

Hi,
Thanks for posting in Microsoft TechNet Windows Vista Forum.
Upon your description, I see that you have done a lot of research and tests. Unfortunately, none of these troubleshooting works.
Based on my experience, this issue related to "failed to play test tone" can be related to several reasons. It also includes hardware defect. I am confusing why Dell confirms that the issue is related to Operating System. Could you let me know what operation Dell had troubleshot with you?
Meanwhile, here I just provide more troubleshooting except what you performed. If it doesn't work, I may also need to recommend that you contact Dell for support.
1. Microsoft has released a Hotfix to troubleshoot related to "Failed to play test tone".
http://support.microsoft.com/kb/930883
2. Make sure that these services are started.
Windows Audio
Multimedia Class Scheduler
Remote Procedure Call
Windows Audio Endpoint Builder
3. I noticed that this issue occurred not long ago, I may need to suggest that you perform a System Restore to the previous restore point when the computer without any problem.
System Restore
==============
1)     Please click on Start and choose All Programs, Accessories, System Tools, and then Windows Backup.
2)     Click Restore on the left pane.
3)     Choose Basic Restore.
4)     Follow the wizard and click Next.
5)     If you would like to restore everything in the backup, we can check the box “Restore everything in this backup” on the top of the window.
6)     We can also browse and choose certain files and folders to restore. Then, click Next.
7)     Then choose the folder to save the recovered files and click Next.
8)     When we see a “Restore is complete!” message, click Finish.
Meanwhile, as I know, I'm afraid that there is no other way to look at EVM file except Windows Driver Kit. Maybe there are some third-party software that out of my mind can look at EVM files, you may need to perform more research on Internet.
Hope this helps. Thanks.

HT3775 i need codec format to support audio to play movies?

Similar Messages

Maybe you are looking for