HT3775 Quick time 7 does not run on mac x v10.7

Hello Quick Time,
The Problem that comes is:
The Document "Ishk.mp4" could not be opened.
A required codec isn't available.
To see if additional software is available that will
enable Quick Time to open the movie, click Tell Me More.
And if I try to do "Tell Me More", then nothing happens.
What should I do?
Thanks so much
Raj

Install Perian for quicktime to add more codec support.
Or use a better more general and more powerful player like vlc.

Similar Messages

HT3775 Quick Time player does not support AVI movies?

I can't play an AVI movie on quick time player. Why?

If you cant play it in QuickTime, then another media player may be more successful. A couple of good options that generally pick up where QuickTime falls short are VLC (http://www.videolan.org/vlc/index.html) and MPlayer OS X Extended (http://www.mplayerosx.ch).

Firefox4 does not run on Mac OSXv10.4.11. Can NOT reload v3.6.12. What do we do

I was forced to update to firefox v4, only to find out that it does NOT run on Mac OSX10.4.11. I can nor re-load the older version v3.6.11. It means that we need to migrate to anther system provider. This is a shame since we like Firefox's features. Can you help suggest way forward pls?
Dr Mahmoudian
[email protected]

Sun Studio 12 does NOT support RH5 -- only RH 4
Sun Studio 12 update 1 supports RH5, RH5.1, RH5.2 and RH5.3
Oracle Solaris Studio 12.2 supports RH5 - RH5.4, with some testing on RH5.5
Marty Itzkowitz, project lead Oracle Solaris Studio Performance Tools

Time Machine does not run automatic backups

For the last couple of days TM is refusing to run the hourly backups.
Manual backups run fine, but not the automatic ones.
Modifying the exclude list seems to have no effect on the manual backups.
It keeps using the "old" exclude list, i.e. the one I had before the problem
started.
In /var/log/system.log I find the following message every hour:
Nov 18 21:26:03 macdelta com.apple.backupd-auto[12774]: Not starting scheduled T
ime Machine backup - time machine destination not resolvable.
I checked the plist
/System/Library/LaunchDaemons/com.apple.backupd-auto.plist
and it seems to be fine. It is identical to the one in another mac that shows no problems with TM. The same is true for the other plists related to backupd in that directory.
Question 1: What are all the plists that control the behaviour of TM
Question 2: How do I resume hourly automatic backups?

My laptop's drive is encrypted and my laptop is with me at all times. The backup disk remains at my desk and does not have a cable lock. The important thing to consider here is that even if your laptop drive is encrypted (e.g., through FileVault), the TimeMachine backups *are not* (unless you are logged out of your account when you backup--at which point, why bother using TimeMachine over a simple disk cloner such as SuperDuper!?).
Anyway, that's off-topic for now. You mention that it changed the element of the plist that identifies the backup volume, do you mean the UUID element? I noticed it changed:
10.6.4:
<key>DestinationVolumeUUID</key>
<string>040F3E3C-11BF-3AF9-8813-2B6110B200A0</string>
10.6.5:
<key>DestinationUUID</key>
<string>24E15602-063A-3930-B1FE-F2DB15865083</string>
In addition, after doing a reset (while attempting to trouble shoot this issue), the new plist is missing some things the old plist had--for example:
<key>HostUUIDs</key>
<array>
<string>00000000-0000-1000-8000-0017F2C65E0C</string>
<string>25233988-B93F-56AF-B940-F386CB4442EC</string>
</array>
Thoughts?
-Chuck

Quick time player does not work on wiggio,com, Tried all suggestion on Firefox crashes ariticle

Quick Time plugin crashes when I try to play voice note on wiggio. I have tried all the steps in Firefox crash article, I have done all updates. I have the current Firefox update. I have also reset Firefox. Nothing works it keeps crashing. How do i get it to work. Please help.
I have submitted crash reports http://crash-stats.mozilla.com/report/index/bp-eb95e701-f318-4ae4-ba59-b9f8b2121018

Looks to me like those are all windows downloads. Read the following thread. Maybe one of the players will help.
http://discussions.apple.com/message.jspa?messageID=6230721#6230721

Quick time Pro does not allow me to download files after unlocked.

In a website there are some audios in QT that I want to download. I right clicked and it gave me the option to download them. After a new screen apperared inviting me to purchase QT Pro. I did it and got the registration code to unlock Pro features.
Well, now I go to the same website and right clicking on the objects does not work anymore, hence I can not download anything and I just purchased the license to do it.
Windows Vista.
Regards,
Juan

I think I killed myself. In the QT preferences I had choose Enable kiosk mode in the browser tab, which disables the option to save movies and change preferences from within the browser.
Now I have another problem, but I will open another ticket. I download, but it only downloads 1K files, but not the whole contents.
Thanks, Juan

Quick Time pro does not start at all and gives an error "Fehler 46: K"

I installed QT pr0 without problems. But QT does not start. After doubleclicking there is a short message with the above error code "Fehler 46:K" No movie can be played is thera any support for pro customer`? Is the Problem known? Installing and uninstalling does not help. Procedures recommanded from apple - empty temp etc. did not help either. Google did only find 2 posts none with valuable information.

As I'm sure you are already aware, that HDD has failed to the point it cannot find a bootable volume.
If you have a backup, no worries.
If you do not have a backup, you could try to reinstall the operating system and get the disk to a state in which it will at least mount. Then, copy whatever information remains intact to another disk. I would be inclined to replace the drive now, install the failed one in an external enclosure, and attempt to extract whatever information you need from it.

Upgrading to Quick time pro does not recognisse my key

I bought a key from the apple store in the uk and I have had an email with the key. I have tried entering it in system preferences quicktime register by both typing and cutting and pasting but it keeps sayin that it is invalid and does not update. Any ideas ?

Just as you've posted in the Windows side of these
Discussions pages you may have purchased a Windows
key?
just checked and it does say for OS X but I will now try in the mac side thanks

Cisco Connect does not run with Mac OSX Mountain Lion (10.8.2)

When I first installed Cisco Connect that came with my E1500 router, I was running Mac OSX Snow Leopard (10.7) and it worked fine. I upgraded my OSX to Mountain Lion and now when I start Cisco Connect, I get:
Unsupported operating system
The router software supports these operating systems:
- Mac OS X 10.5.8 or later
- Mac OS X 10.6.1 or later
- Mac OS X 10.7 or later
I saw some other thread/info/download on Cisco Connect with Lion (10.7) but nothing for Moutain Lion (10.8) - is there a fix forthcoming?
Thanks
Gary

All i want to do is disable the guest function through cisco. i live in an apartment and everyone logs into my guest account. i was at my neighbours and they were laughing saying they done need to subscribe for the internet cause they just log onto local wi fi. and mine is one of them. i dont know if that'll slow down my internet with so many people using it. but all i want to do is just avoid it all together and get rid of it. but in this case i am having the same problem as all of you. to disable the guest function you need to go through cisco connect and it is not compatible with mac osx mountain lion. grrrrrrr

Javaee6 sample does not run on remote GF 3.1

I installed javaee6 with samples:
java_ee_sdk-6u2-jdk-linux-x64-ml.sh
I can run "automatic-timer" sample properly, when GF 3.1 runs on localhost.
If GF 3.1 runs on a remte host.
I set the remote GF 3.1 in bp-project/build.properties:
javaee.server.name=192.168.1.101
Now automatic-timer sample does not run:
[java] Waiting for the timer to expire
[java] Logged timeouts :
[java] org.omg.CORBA.COMM_FAILURE: FINE: IOP00410001: Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700 vmcid: OMG minor code: 1 completed: No
[java]      at sun.reflect.GeneratedConstructorAccessor30.newInstance(Unknown Source)
[java]      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[java]      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
[java]      at com.sun.corba.ee.spi.orbutil.logex.corba.CorbaExtension.makeException(CorbaExtension.java:248)
[java]      at com.sun.corba.ee.spi.orbutil.logex.corba.CorbaExtension.makeException(CorbaExtension.java:95)
[java]      at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator.handleFullLogging(WrapperGenerator.java:387)
[java]      at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator.access$400(WrapperGenerator.java:107)
[java]      at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator$2.invoke(WrapperGenerator.java:511)
[java]      at com.sun.corba.ee.spi.orbutil.proxy.CompositeInvocationHandlerImpl.invoke(CompositeInvocationHandlerImpl.java:99)
[java]      at $Proxy26.connectFailure(Unknown Source)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:257)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:270)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:129)
[java]      at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:223)
[java]      at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:228)
[java]      at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:393)
[java]      at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
[java]      at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
[java]      at com.sun.enterprise.naming.impl.SerialContext$ProviderCacheKey.getNameService(SerialContext.java:1241)
[java]      at com.sun.enterprise.naming.impl.SerialContext.getRemoteProvider(SerialContext.java:411)
[java]      at com.sun.enterprise.naming.impl.SerialContext.getProvider(SerialContext.java:347)
[java]      at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:504)
[java]      at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:455)
[java]      at javax.naming.InitialContext.lookup(InitialContext.java:392)
[java]      at enterprise.automatic_timer_client.AutomaticTimerJavaClient.getRecords(AutomaticTimerJavaClient.java:64)
[java]      at enterprise.automatic_timer_client.AutomaticTimerJavaClient.main(AutomaticTimerJavaClient.java:53)
[java] Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused
[java]      at org.glassfish.enterprise.iiop.impl.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:340)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:242)
[java]      ... 15 more
[java] Caused by: java.net.ConnectException: Connection refused
[java]      at sun.nio.ch.Net.connect(Native Method)
[java]      at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
[java]      at com.sun.corba.ee.impl.orbutil.ORBUtility.openSocketChannel(ORBUtility.java:110)
[java]      at org.glassfish.enterprise.iiop.impl.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:325)
[java]      ... 16 more
[java] javax.naming.NamingException: Lookup failed for 'java:global/automatic-timer-ejb/StatelessSessionBean' in SerialContext[myEnv={java.naming.factory.initial=com.sun.enterprise.naming.impl.SerialInitContextFactory, java.naming.factory.url.pkgs=com.sun.enterprise.naming, java.naming.factory.state=com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl} [Root exception is javax.naming.NamingException: Unable to acquire SerialContextProvider for SerialContext[myEnv={java.naming.factory.initial=com.sun.enterprise.naming.impl.SerialInitContextFactory, java.naming.factory.url.pkgs=com.sun.enterprise.naming, java.naming.factory.state=com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl} [Root exception is org.omg.CORBA.COMM_FAILURE: FINE: IOP00410001: Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700 vmcid: OMG minor code: 1 completed: No]]
[java]      at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:518)
[java]      at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:455)
[java]      at javax.naming.InitialContext.lookup(InitialContext.java:392)
[java]      at enterprise.automatic_timer_client.AutomaticTimerJavaClient.getRecords(AutomaticTimerJavaClient.java:64)
[java]      at enterprise.automatic_timer_client.AutomaticTimerJavaClient.main(AutomaticTimerJavaClient.java:53)
[java] Caused by: javax.naming.NamingException: Unable to acquire SerialContextProvider for SerialContext[myEnv={java.naming.factory.initial=com.sun.enterprise.naming.impl.SerialInitContextFactory, java.naming.factory.url.pkgs=com.sun.enterprise.naming, java.naming.factory.state=com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl} [Root exception is org.omg.CORBA.COMM_FAILURE: FINE: IOP00410001: Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700 vmcid: OMG minor code: 1 completed: No]
[java]      at com.sun.enterprise.naming.impl.SerialContext.getProvider(SerialContext.java:352)
[java]      at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:504)
[java]      ... 4 more
[java] Caused by: org.omg.CORBA.COMM_FAILURE: FINE: IOP00410001: Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: localhost; port: 3700 vmcid: OMG minor code: 1 completed: No
[java]      at sun.reflect.GeneratedConstructorAccessor30.newInstance(Unknown Source)
[java]      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[java]      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
[java]      at com.sun.corba.ee.spi.orbutil.logex.corba.CorbaExtension.makeException(CorbaExtension.java:248)
[java]      at com.sun.corba.ee.spi.orbutil.logex.corba.CorbaExtension.makeException(CorbaExtension.java:95)
[java]      at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator.handleFullLogging(WrapperGenerator.java:387)
[java]      at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator.access$400(WrapperGenerator.java:107)
[java]      at com.sun.corba.ee.spi.orbutil.logex.WrapperGenerator$2.invoke(WrapperGenerator.java:511)
[java]      at com.sun.corba.ee.spi.orbutil.proxy.CompositeInvocationHandlerImpl.invoke(CompositeInvocationHandlerImpl.java:99)
[java]      at $Proxy26.connectFailure(Unknown Source)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:257)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:270)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:129)
[java]      at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:223)
[java]      at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:228)
[java]      at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.is_a(CorbaClientDelegateImpl.java:393)
[java]      at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112)
[java]      at org.omg.CosNaming.NamingContextHelper.narrow(NamingContextHelper.java:69)
[java]      at com.sun.enterprise.naming.impl.SerialContext$ProviderCacheKey.getNameService(SerialContext.java:1241)
[java]      at com.sun.enterprise.naming.impl.SerialContext.getRemoteProvider(SerialContext.java:411)
[java]      at com.sun.enterprise.naming.impl.SerialContext.getProvider(SerialContext.java:347)
[java]      ... 5 more
[java] Caused by: java.lang.RuntimeException: java.net.ConnectException: Connection refused
[java]      at org.glassfish.enterprise.iiop.impl.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:340)
[java]      at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:242)
[java]      ... 15 more
[java] Caused by: java.net.ConnectException: Connection refused
[java]      at sun.nio.ch.Net.connect(Native Method)
[java]      at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
[java]      at com.sun.corba.ee.impl.orbutil.ORBUtility.openSocketChannel(ORBUtility.java:110)
[java]      at org.glassfish.enterprise.iiop.impl.IIOPSSLSocketFactory.createSocket(IIOPSSLSocketFactory.java:325)
[java]      ... 16 more
[java] Exception in thread "main" java.lang.NullPointerException
[java]      at enterprise.automatic_timer_client.AutomaticTimerJavaClient.main(AutomaticTimerJavaClient.java:54)
Why does it use localhost instead of 192.168.1.106 ?
How can I run the sample against a remote GF 3.1 ?
Thank you

I got solution:
Re: Can't access remote EJBs (GF3.1)
I followed the instructions from http://www.java.net/node/676636
and changed "/etc/hosts" file:
1) commented out the "internal" IP addresses in the first two lines
2) and added a the external IP address
#127.0.0.1 localhost
#127.0.1.1 lennyserver
192.168.0.202 lennyserver
The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
Now the InitialContext.lookup() can find the bean.

I just updated tosystem10.6.8. I am running Iphoto 08 version 7.1.5 Quick time movies will not open and play directly in Iphoto. When I move them to my desktop they play fine.Quick time 10.0 What do I need to do?

I just updated tosystem10.6.8. I am running Iphoto 08 version 7.1.5 Quick time movies will not open and play directly in Iphoto. When I move them to my desktop they play fine.Quick time 10.0 What do I need to do?

You need to download and install QuickTime Player 7 for Mac OS X v10.6.3 or later
OT

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?

Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]]

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP

Hi,
I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
Thanks
Feroz

The way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
I am afraid some of reports engine failed to start and you get nothing back in your case.
After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
Hope this helps.
Thanks,
-Shaun

Time Machine does not see a Time Capsule external drive

Time Machine will not recognize an external drive attached to my Time Capsule, even though it did so last week. How do I get it working again?
Until last week, I was using Time Machine to back up to a Verbatim 2 TB drive attached to a Time Capsule. It occasionally hung, requiring me to restart the Time Capsule in order to get backups working again, so I bought a Seagate 2 TB drive to replace the Verbatim in case the problem was a flaky drive. Now I can't get Time Machine to recognize either disk when the disk is attached to the Time Capsule.
Both disks are formatted in Mac OS Extended (Journaled). Both disks work correctly when I attach them directly to my Mac. When I attach either disk to the Time Capsule, Airport Utility shows the external drive, shows that sharing is enabled, and I can even mount the Time Capsule with Finder and see the external disk with Finder. But when I try to Select Disk in Time Machine Preferences, whether or not the Time Capsule is mounted with Finder, Time Machine Preferences doesn't see the disk—the only choices of disk are My User Account on the Time Capsule, and Other Time Capsule.
Restarting my Mac and restarting the Time Capsule does not help. Software and firmware updates are (and have been) up to date. I'm running OS X Mavericks 10.9.2 and Time Capsule version 7.6.4.
To reiterate, this was working a week ago. How do I get it working again?

If nothing in your configuration has changed, you can try plugging the disks one at a time directly into your mac, run Disk Utility and perform a Repair Disk. If any errors are displayed, rerun Repair Disk until there are none. Then try them back on the Time Capsule.

HT3775 Quick time 7 does not run on mac x v10.7

Similar Messages

Maybe you are looking for