HT3775 unable to open movie using hdtv.xvid-fum.avi

i am unable to open movie off of flash drive . receive message that says. "the document Game of thrones.s03e08.hdtv.xvid-fum.avi can not be opend. a required codec isnt available"

You'd need a converter (if this is not a commercial app - if so, copyright and DRM issues may be at work); you can try MPEG Streamclip - see if your format is mentioned. Otherwise, you can try VLC (a free player that'll play most any format).

Similar Messages

Unable to open movies in certain sites using Firefox 4, no problem with former versions

As a almost daily visitor of the site Bigfun.be I got a crash every time I wanted to open a movie, since I started using Firefox 4.
After some automatic updates, the crashes disappeared.
But it's still unable to open movie files. There is a message which says that the file is being loaded, but it isn't.
I've contacted the webmaster, he knows about the problem and suggested me to uninstall the version 4 and to go back to the 3.6 version.

I went to that site and played a couple of movies without a problem. Cat & Budgie and Horse on the back seat of a car...lol.
Have a look at your firewall logs. Is the firewall blocking '''plugin_container.exe''' by any chance? That utility is part of Firefox and acts like a kind of sandbox to isolate plugins which crash without crashing the whole browser. But it does need Internet access. Generally speaking, what often happens is the firewall throws up an alert to which the user doesn't respond. So the firewall 'assumes' it's a threat and blocks it.
Can you go to this site: http://www.liveleak.com/ and click on any video. Is the player visible even if it doesn't play?

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." Any thoughts, Thank you.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.

Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

HT3775 Unable to open MPG Movies

I have 10.8.1 version and unable to open mpg movies. It states I need a required codec isn't available. Not able to find it. Please advise.

You'd need a converter (if this is not a commercial app - if so, copyright and DRM issues may be at work); you can try MPEG Streamclip - see if your format is mentioned. Otherwise, you can try VLC (a free player that'll play most any format).

Unable to open Dreamweaver using OS X 10.9.2

I recently updated to Maverick OS 10.9.2 and am now unable to open Dreamweaver CS5 11.0--an error message appears saying that Dreamweaver closed unexpectedly. I've also tried installing Dreamweaver updates but I'm not able to.

Please try to clean your DW CS5 preferences by following the steps mentioned below:
Open “Finder” and press CMD+SHIFT+G to open the “Go to the folder” dialog
Type ‘~/Library’ (without the quotes; note the ~ sign before /Library) and click “Go”
Navigate to “Application Support/Adobe/”
Locate the folder named “Dreamweaver CS5” and make a backup of this folder (this will be needed to restore vital preferences later)
Rename/Delete the folder “Dreamweaver CS5” (again without the quotes)
Create a new folder named “Dreamweaver CS5” (again without the quotes)
Create a new folder named “ab_XY” (without the quotes; for example: en_US; you can get this in your backup folder! where ab_XY is the locale in which Dreamweaver was installed)
Navigate inside the folder “ab_XY” and create a new folder named “Configuration” (without the quotes)
Navigate inside the folder “Configuration”
From the backup folder, copy the following folders (if available/present on your system) and paste them inside the “Configuration” folder (please the attached screen shot “Restore_Selected_Preferences_CS5_Mac.png” for reference):
CodeCollapse
CodeColoring
CodeHints
DocumentTypes
DVADialogPrefs
Snippets
Workspace
Open “Finder” and press CMD+SHIFT+G to open the “Go to the folder” dialog
Type ‘~/Library’ (without the quotes; note the ~ sign before /Library) and click “Go”
Navigate to “Preferences/” folder
Locate the file “Adobe Dreamweaver CS5 Prefs” and rename/delete the file
Now try to launch Dreamweaver again and see if you still face the issue.
Please Note: After you have launched Dreamweaver, please ensure that you DO NOT launch “Adobe BrowserLab” panel. Please create a new workspace by following the steps mentioned below, according to your liking but please refrain from using “Adobe BrowserLab” panel as this is known to cause a crash in Dreamweaver on Mac 10.9.
Steps to create a workspace (without “Adobe Browser Lab”):
Launch Dreamweaver
Locate “Adobe BrowserLab” (but don’t open it) and click the top-right-hand-side corner of the panel and select the option “Close Tab Group”
Now, arrange the remaining panels in your workspace as per your liking
Go to menu “Window -> Workspace Layout -> New Workspace…”
In the “New Workspace” dialog, provide a name of your choice and click “OK” button
Also, you may like to visit this page: http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html for a known issue of Dreamweaver not launching after upgrading to Mac 10.9 (Mavericks).
If the issue still persists even after cleaning your Dreamweaver CS5 preferences, please let us know. We would like to have a connect session with you to resolve your query at the earliest.
Also, let me take this opportunity to propose and introduce the latest Dreamweaver CC to you. Dreamweaver CC provides you the potential and ability to do much more and gives you the cutting edge in your business. You may like to take a look at its features at http://www.adobe.com/products/dreamweaver/features.html. I’m sure you’ll find more than what you have been looking for and you’ll love them.
Here's how you can buy Dreamweaver CC:
Visit the link http://www.adobe.com/products/dreamweaver.html
Towards the bottom-right-hand side, locate “Adobe Dreamweaver CC” and click “Join” (please see attached screen shot “Where_To_Buy_Dreamweaver_CC.jpg” for reference)
Select “Month-to-month” OR “One-year” for “Plan”
Click the “Add to Cart” button
Follow the easy and descriptive step-by-step “Checkout” instructions
Please let us know. We are eager to help you.
Thanks,
Lalita

Adobe Acrobat unable to open documents using Firefox 17.0.1, with Max )S X version 10.7.5. Am able to open in Safari.

Using Adobe flash player version 11.5.502.136, Adobe Reader XI version 11.0.0, AdobePDFViewer NPAPl.plugin, unable to open documents, receive error message, "Adobe Reader unable to open in this browser." Safari will open documents.

Hello alouisell, see: [https://support.mozilla.org/en-US/kb/pdf-files-are-blank-and-cant-be-downloaded-mac#os=mac&browser=fx17 PDF files are blank and can't be downloaded on Mac]
thank you

I have an iMac G5 isight (20" screen) Leopard OS 10.5.8 I do not have an intel chip. I am unable to open movie links on facebook using Adobe flash player. I called Adobe Systems and they said Adobe no longer supported computers that did not have intel chi

I have an iMac G5 (20 inch screen) i sight (no intel chip).Leopard OS 10.5.8. Recently I went on Facebook and tried to open a movie site someone had sent me on Facebook andwhen I tried to open the video on Facebook, I was told I had to upgrade my Adobe Flash Player. i tried to do this, but turns out that Facebook is requiring folks to have an intel chip in order to view movies...this is outrageous! Just think of all the folks in the world who have great running pre intel chip Apple computers. I called the Adobe Help line and was told that I really needed to buy a new computer....no thanks. How do I find a way to get a new version of Adobe for Facebook and youtube. I wish Apple could develop a way to have intel chips installed in the older computers. If you have any suggestions on this please let me know.
Thanks, Sarah

Either get a screen cleaning cloth, or carefully us a slightly damp lint-free cloth and dry off with a dry link-=free cloth.
As to Flash Videos: I am in a similar same boat. I cannot watch flash videos on the BBC website or on BBC iPlayer, although all other flash videos (YouTube and FaceBook for example) are fine.
For reasons that passeth all understanding, they work with the PPC version of Firefox, called TenFourFoxG5.app, once you have anabled plug-ins, as it does not natively support Flash.
You can download TenFourFoxG5 from here:
http://www.floodgap.com/software/tenfourfox/
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
I am using Flash 10.1.102.64 in TenFourFox and it works just fine.

Unable to open forms using menu (forms10G & 10AS environment)

Hi
I am trying to open forms (menu) using URL.
in 10AS (application server) there is a .env file.
When I enter the URL a form open ups, then there is a text item on the form, I have to enter the .env file name.
Then I have to click on OKutton.
When I am clicking on OK button, it showing me the following
Installed successfully!
Oracle Application Server
Forms Services
Oracle Application Server 10g
Forms Services version 10.1.2.0.2 [OK]
Few days back I was able to open forms
I am able to access forms in other server using the URL of that other server.
Please tell me what should I do?
Regards

hi
try to modify formsweb.cfg something like this.
Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[test]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
*form=login.fmx*
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oraclecreate working directory modify default.env.
# Search path for Forms applications (.fmx files, PL/SQL libraries)
# If you need to include more than one directory, they should be semi-colon
# separated (e.g. c:\test\dir1;c:\test\dir2)
FORMS_PATH=c:\DevSuiteHome_1\forms;C:\henand try to use the URL something like this.
http://machine_name:Port/forms/frmservlet?config=testsarah

Unable to open ports using terminal

I need to open port 16004 and have attempted to do so via Terminal by entering:
sudo ipfw add allow tcp from 16004 to 1600.
However when i run port scan from the Network Utility it does not show up as open.
Is this the correct syntax? Am I missing something?
If someone could help please.

Sorry but can you explain further
man ipfw tells you everything you need to know (and more) about setting ipfw rules.
What goes in place of the 'any to any'? anything or is that it?
The syntax of an ipfw allow rule is:
allow [protocol] from [souce] to [dest] [port]
So the statement:
allow tcp from any to any 16004
says that any source address is allowed to connect to any destination address on port 16004. To be more secure you might lock down the port so that specific IP addresses can connect, e.g.:
allow tcp from 192.168.1.0/24 to in 16004
this says that any machine on the 192.168.1.0/24 network is allowed to connect to any interface on the current machine ('in') on port 16004

Why can't I open facebook using Safari?

I am unable to open Facebook using Safari on my MAC desktop?

From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari then try Facebook.

Unable to open reports with Web intelligence

Hi there,
We are unable to open reports using Webi Intelligence. Error of "Session is closed(Error: INF)" apears.
I have restarted the SIA and Apache services with no luck.
Version : Business Objects XI3, Edge Series professional
Kind regards,

Try changing the idle connection timeout on your Web Intelligence Processing Server to 60 minutes (from the CMC).
If this doesn't work, please add a trace to the Web Intelligence Processing Server (add a -trace to the command line parameters of the server). and post the log for the relevant time period.

HT4284 We are trying to open .mov files using Quick Time. It says that it is unable to open it because a codec is not available. What do we need to do?

We are trying to open and edit .mov files using Quick Time. It says that it is unable to open it because a codec is not available. What do we need to do?

he knows his ID , if he did all whats in the link he can get his password back ?
how can i make him call applecare ? is there a way to speak to them from jordan ??
i have been trying to reach any1 in apple so they can communicate and help my friend (us) to make him remember it .
am not asking for the password or trying to get into the phone without using it , and i can take my money back though i need to help my friend as well since now he cant use it as well.
thanks kil

Exchange Server 2010 Move mailbox to database but display MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)

I have 2 exchange server "A" and "B". Server "A" have "Test1" database and Server "B" have "Test2" database. I tried move some mailboxes from "Test1" to "Test2"
but sometimes mailboxes cannot finished and display below error. I used Domain administrator to move mailboxes and grant "Manage full access permission" to these mailboxes but still failed. Finally, I clear the failed move request
and repeat the move mailboxes action several times.  Then, the move request completed without error. Have any suggestion? Please help. Thank you!
Mailbox move for 'xxx.com/xxx/xxx/xxx - Users/xxx/Peter' (331d5b4e-0bd1-428a-ae28-d97581ae0d7f) has failed.
Error code: -2147024891
MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
    Lid: 18969   EcDoRpcExt2 called [length=132]
    Lid: 27161   EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
    Lid: 32881   StoreEc: 0x80070005
    Lid: 50035
    Lid: 64625   StoreEc: 0x80070005
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropLogon [254]
    Lid: 56503
    Lid: 12716   StoreEc: 0x80070005
    Lid: 20794
    Lid: 28474   StoreEc: 0x80070005
    Lid: 22330   dwParam: 0x0        Msg: 14.03.0123.002:NHK-S08-MBD02
    Lid: 1750    ---- Remote Context End ----
    Lid: 23354   StoreEc: 0x80070005
    Lid: 25913
    Lid: 21817   ROP Failure: 0x80070005
    Lid: 26297
    Lid: 16585   StoreEc: 0x80070005
    Lid: 32441
    Lid: 1706    StoreEc: 0x80070005
    Lid: 24761
    Lid: 20665   StoreEc: 0x80070005
    Lid: 25785
    Lid: 29881   StoreEc: 0x80070005
Context:
Mailbox: Primary (331d5b4e-0bd1-428a-ae28-d97581ae0d7f)

Hi Gordon
This could happen if there is any mailbox which has occupied more space than its normal quota allocated.
As suggested by geo try to clean all the DB's first
You can probably run Get-Mailboxdatabase | Clean-Mailboxdatabase which will clean all of your DB's wait for some time until it gets completed
Also try running the command with the MRS server parameter switch and specify a CAS FQDN and see the results if it gets succeded
Get-Mailbox -Database 'DBNAME'| New-MoveRequest -TargetDatabase DBNAME -BatchName "BATCHNAME" -BadItemLimit 100 -AcceptLargeDataLoss -MRSserver CAS server FQDN Good Luck !!Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish

Cannot move/use/open anncilary (popup?) windows in multiple applicationsI

I have started having trouble with numerous Finder related tasks:
1. I cannot close/move/use certain windows on the desktop. Usually these are what I would describe as ancillary windows. For example, iCal automatic reminder windows cannot be closed nor removed. In Dreamweaver, tools menus get stuck and cannot be moved. This problem progresses to where I can no longer use or even open Dreamweaver tools windows, (e.g., I am unable to type in open spaces and cannot get popup menus to scroll.)
Re-booting my computer makes the stuck iCal windows disappear, but the next time iCal sends me a reminder, I’m back in the same situation. Re-launching Dreamweaver restores functioning for a while, but within 5 minutes or so, the problems return.
I have no idea if this is related, but about 2 weeks ago, I had even worse problems (e.g., was unable to rename folders on the desktop or move them to the trash.) Pushing F6, the number lock key, eliminated those problems, but now I am having increasing difficulty with the issues described above.
Thank you for any help you can offer!
PowerBook G4 Mac OS X (10.4.7)

Hello akaMisterAnderson
I am having the exact problem when I try to rename or move the MOV file. I use Unlocker to determine which process is locking the MOV file and like you have said: it is the Explorer process.
I hope there will be a patch for this problem soon and if you know of any solution, please inform me.
Thanks.

I HAVE PICTURES IN MY DOWNLOAD, UNABLE TO OPEN OR MOVE

I HAVE DOWNLOADED PICTURES. THEY SHOW IN DOWNLOADED DROP, BUT I AM UNABLE TO OPEN OR MOVE. HAVE CHANGED WHERE THEY DOWNLOAD TO...THIS WORKS. HOW DO I OPEN THE ONES DOWNLOADED PRIOR TO CHANGE. PLEASE ADVISE. THANKS E

Is the problem that you can't see the CD/DVD after you insert it? It could be a simple matter of changing the Finder preferences. From within the Finder pull down the File menu and select 'Finder Preferences'. You should see the following widown appear. Add a check mark next to the 'CDs, DVDs, and iPods' section as shown below. Once you do so the inserted disks should show up on your desktop.
If you still have problems please provide more details on the specific disks you are trying to use.

HT3775 unable to open movie using hdtv.xvid-fum.avi

Similar Messages

Maybe you are looking for