HT3805 I just updated to 3.4.5 and I can no longer export out of Aperture.

The only way to get a photo out is through edit with CS6. Has anyone else had this problem? I've tried rebuilding permisions and database to no avail. Until 3.4.5 I was very happy with the program. I get the following console error.
6/9/13 11:30:21.629 AM com.apple.security.pboxd[594]: CGSGetWindowTags: Invalid window 0x19e
6/9/13 11:30:21.629 AM com.apple.security.pboxd[594]: kCGErrorFailure: CGSSetHideOnDeact: error getting window tags
6/9/13 11:30:22.070 AM com.apple.launchd.peruser.501[162]: (com.apple.ubd[630]) Exited with code: 254
6/9/13 11:30:31.552 AM Aperture[587]: RVS:__54-[NSRemoteSavePanel _runOrderingOperationWithContext:]_block_invoke_0319 : Timeout occured while waiting for the window
6/9/13 11:30:33.995 AM com.apple.launchd.peruser.501[162]: (com.apple.ubd[633]) Exited with code: 254

This looks like a known sandboxing error: See this long thread: Re: Create New Library
Repair permissions using Disk Utility.
Remove the Aperture's user preferences (com.apple.aperture.plist) from the User Library's Preferences folder as described here:
Aperture 3: Troubleshooting Basics
Also remove the cached /Users/YourUserName/Library/Containers/com.apple.Aperture/Container.plist
Also remove the cached /Users/YourUserName/Library/Caches/com.apple.Aperture
Your User Library is hidden by default in Mt. Lion - to open it in a Finder window use the "Go" menu from the Finder's main menu bar.
Quit Aperture, if it is running. Log off and on again.
Open the user library by using the Finder's "Go > Go to Folder" menu and hold down the options-key, until "Library" appears in the drop down menu. Select it.
In the widow that will open, scroll down to "Preferences"
From the "Preferences" folder  remove "com.apple.Aperture.plist".
From the "Containers" folder remove com.apple.Aperture/Container.plist
From the "Caches" folder remove com.apple.Aperture
Then try to launch Aperture again.
But deleting the "Preferences" file will cause Aperture to forget the preferences settings. Be prepared to have to reset all options you set using the Aperture Preferences panel.

Similar Messages

  • Just installed 11.0.5.5 and I can no longer sync with my iPhone 4 or my iPhone 5

    I just installed 11.0.5.5 and I can no longer sync with my iPhone 4 or my iPhone 5. Any thoughts? It went from accurately displaying my content to showing most of the content as "Other" and now says it can't sync because it can't determine the apps to sync.

    Hi,
    I have sync issue, too, but a bit different. When connecting my iPhone 4 and hitting the sync button in iTunes 11.0.5 (5), the synch process starts, gets stuck at step 5, then eventually finishes without any error message, but content (TV series / movies) are not updated on the iPhone.
    I already tried to power cycle my MacBook (Intel 13" running Mac OS X Lion) and my iPhone 4 (iOS 6.1.3).
    Was working perfectly before upgrading iTunes. Anybody has a solution to this yet?
    Thanks in advance.
    Martin

  • You guys just automatically updated my version of Firefox and I can no longer restart with addons disabled! I need to do that. Either tell me how with this new

    I need to restart with addons disbaled because otherwise my screen display changes text to colors and
    funky font when I scroll up and down on web site pages.

    I have solved problem by figuring out how to bring up the no longer
    shown by default Menu Bar.

  • Just updated iTunes (8/1/13) and I can't see the top menu bar which includes things like search, playlists, movies, and others of the sort. I tried dragging it around and still nothing. Any help????

    See how it's jussssttttt thereeeee....but my pointer can't even access it. Someone help me.

    Try quitting the iTunes application, then pulling the com.apple.iTunes.plist file from ~Library/Prefernces/, to get to that file, click Finder > Go > hold Option + click Library > Preferences.
    Does iTunes open up normall after trashing or moving that file to the desktop?

  • I just updated an iMac to Mavericks and I can't print anything!!!

    I have a plotter (Canon iPF815) and a Canon C7055. I installed the C7055 driver but still won't print, and the system won't let me run the iPF815 one. Please HELP ME!

    maxscully13 wrote:
    I have a plotter (Canon iPF815) and the system won't let me run the iPF815
    You need to install the driver for OS X 10.8 and then run the 10.9 updater

  • I just upgraded to the iphone 5S and I can no longer sync to the AUTHORIZED computer.  I keep getting a message that the computer is not authorized.  So I click authorize, put my password in and get the message that this computer is now authorized.

    After verifying that the computer is authorize, I hit sync and after a few minutes it I get the message that the iphone cannot be synced because the computer is no longer authorized for purchased items that are on this iphone.  Why???? 

    Hi, ImTiffanyA. 
    The most common cause for this issue would be media present that is purchased with another Apple ID.  The article below will walk you through the process of verifying if that is the case or correcting the issue if not.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Cheers,
    Jason H.

  • HT4623 I just updated my phone to ios6 and it says update completed, just a few ore steps and im done but wont let me go beyond that page when i press continue it just goes back to the ios6 screen "slide to update"???

    i just updated my iphone to ios6 and now it wont let me use my phone it says i phone was updated there are just a few more steps then im done but it wont let me get past the first screen it just goes back to the slide to update screen....

    If you are absolutely positively sure that the password you are typing in is your Apple ID password, I would try once more to enter the password. Be real careful as you type and make sure that Autocorrect is not changing what you are typing.
    If no luck try to proceed without entering the password. If you can get the iPad functional go into
    Settings > ITunes and App Store and log in there.
    If you can log into to your Apple ID there you will also need to go to
    Settings > Messages > Send and Receive and enter or check the email at which you want to receive messages,
    Also
    Settings > FaceTime > check or enter the email address you want to be reached by FaceTime.

  • I just updated to 10.9.2 and now my monitor cannot rotate

    I just updated to 10.9.2 and now my palette monitor has:
    1) Lost the ability to rotate
    2) Forgotten my background image
    3) Changed resolution
    It is a LG Flatron E2351.
    I have found others having similar problems and one person has solved it using 'sudo' commands in the command window (something I'm not up to doing) and that scares me a bit... especially since the problem seems to recur after a second reboot.
    This is a MASSIVE oversight by Apple and i'm quite upset that they would not allow 3RD party monitors or displays!
    I use mine (as mentioned) as a palette for video and graphics purposes... and because I cannot fit 2x landscape monitors.
    This needs to be ammended ASAP by Apple. I expect public outcry... I'm hopeful for it... Just like the removal of "mail merge" from Numbers... I'm starting to scratch my head at Apples [P.J.] decisions "post Jobs".

    My colleagues and I have a similar type issue after upgrading from 10.9.1 to 10.9.2.
    We all use mid-2011 Macbook Pro's and also use a sapphiretech Vid-2x displayport to dual DVI adapter.  This adapter essentially bonds two additional external displays into one large monitor.  i.e. two 24-inch displays now become "one" supporting 3840x1080 resolution.  The only caveat to using this adapter is that both monitors need to be of the same model.  There are no drivers needed to use this hardware adapter.
    We don't have displayports per se, rather we use the thunderbolt port.  The Vid-2x adapters have worked fine for us from 10.7 - 10.9.1.
    Since some of us upgraded to 10.9.2 we've all experienced the same issue in that the Mac no longer recognizes the Vid-2x as being capable of the proper 3840x1080 resolution we require.  The best we can get is 3200x1200.  Another interesting note is that there are at least three different model pairs of monitors being used by us (Samsung, Asus, Dell).

  • I have just updated my phone in icloud and I have lost all my data including my large music collection from itunes. How can I recover my music and phone list?

    I have just updated my phone in icloud and I have lost all my data including my large music collection from itunes. How can I recover my music and phone list?

    Welcome to the Apple Community.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option which is revealed in the iTunes app on your iOS device by tapping the more button at the bottom of the screen.

  • My firefox wont load any page. Says it cant find the server of any of them. I can view the same pages in safari. I just updated to 3.6.7 and now having this problem. What is happening?

    My firefox wont load any page. Says it cant find the server of any of them. I can view the same pages in safari. I just updated to 3.6.7 and now having this problem. What is happening?
    == This happened ==
    Every time Firefox opened
    == Today ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

    Read this somewhere else: Can't find it again so can't reference - apols.
    fixed by entering
    about:config into the nav bar
    toggle dom.storage.enabled to 'true'
    worked for me - but don't know what it does or why :)

  • I have just updated to 7.0.1 and suddenly my search results won't open in a new tab

    I have just updated to 7.0.1 and suddenly my search results won't open in a new tab (let alone a new window - something I much preferred in the past) although this option is checked.
    I even installed Tab Utilities Light Options - all of it's options work, but not for Search Bar.
    When I choose one of the search results and want to view several items on that site (let's say a page with some 50 photo's), there seems to be no longer a way to return to the original search result. I have to start from scratch.
    I hope this can be 'mended' because this is utterly annoying.
    Greetings

    Although 6 other people seem to have encountered this problem, nobody has offered a solution yet. Perhaps the following will put some Firefox gurus on the right trail.
    When I said "my search results", I meant the results obtained with Google (standard when installing Firefox). Now I have tried another search engine (Dogpile) and there The tabs do work. Very strange, isn't it ?

  • Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

    Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

    I have this issue.  Album artwork was totally fine before.  After this update, it is all messed up and even got messed up when transferred to my iphone.
    iTunes doesn't have the artwork anymore, but then iPhone has it but shows wrong artwork with wrong albums.
    Please fix!

  • I just updated my iPhone 4s iOS to iOS 8 and but can no longer find personal hotspot, How and where can I find it on my iPhone 4s

    I just updated my iPhone 4s iOS to iOS 8 and but can no longer find personal hotspot, How and where can I find it on my iPhone 4s.
    Usually I share my internet with other device with ios7 but now that I have ios8 on my iPhone 4s I can no longer find the personal hotspot. How can I share internet with other device using ios8 on my iPhone 4s?
    THanks

    Settings>Cellular>Personal Hotspot. The carrier has to support this for you. This is where you should find the setting to turn it on or off.

  • I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?

    I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?

    I have also retarted twice...

  • I just updated my software to maverick and my iTunes to the most recent version and i can no longer transfer songs from my iTunes to my iPod

    i just updated my software to maverick and my iTunes to the most recent version and i can no longer transfer songs from my iTunes to my iPod. The tracks stay gray with a stagnant circle beside them in the left column. Any ideas?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

Maybe you are looking for

  • How to hide Bottom Line in Report ?

    Hi everyone, We are working on Reports 11gr2 64-bit. In every report, when text is completed on a page, a horizonal line (i.e. bottom line) at the end of the every page is shown and printed unnecessarily. But creates problem in printed stationary, sp

  • Re: Error message while creating recovery disc on a satellite L300

    I have tried to create my recovery discs on my new L300 laptop. Whilst creating the disc i get the following error: Failed to read the following file F:\ZZImg|09115XSP.swm (Error code: 020150-20-00000000). Anyone know what this means, and how to fix

  • How can we split video into frames

    in jmf, can we split video into frames, how can we do that? thank you very much.

  • Script UI: multiline text

    I'm running Windows and having problems creating a script UI with multiline static text var reminder = "Welcome to the jungle\n\nWe've got fun 'n' games\n\nWe got everything you want" var dlg = new Window ("dialog"); dlg.add ("statictext", undefined,

  • Should a Layer Mask appear simultaneously with the creation of a Hue/Saturation mask?

    Using PC+CS4.  When creating a hue/saturation mask, why doesn't a Layer Mask appear simultaneously, as it does on training instruction when instructing with CS4 on mac? I've looked through Prefs and panel options without success.  Anyone got any idea